Related
I tried to upgrade to the new 2.1 reoriented kernel and ended up with the Phone+Caution Sign+Computer symbol. Everytime I try to use the one click recovery it hangs at
Set PIT file..
DO NOT TURN OFF TARGET!!
I have tried this many times, I am always in download mode before I bring up Odin and connect. The only way I can get into download mode now is to hold down the up and down volume and insert usb, then I disconnect usb, bring up odin, it connects and I press start and the above message is where it hangs..Have I bricked this device?
bleeman said:
I tried to upgrade to the new 2.1 reoriented kernel and ended up with the Phone+Caution Sign+Computer symbol. Everytime I try to use the one click recovery it hangs at
Set PIT file..
DO NOT TURN OFF TARGET!!
I have tried this many times, I am always in download mode before I bring up Odin and connect. The only way I can get into download mode now is to hold down the up and down volume and insert usb, then I disconnect usb, bring up odin, it connects and I press start and the above message is where it hangs..Have I bricked this device?
Click to expand...
Click to collapse
You have to open Odin first then put in download mode and plug in USB...
jhernand1102 said:
You have to open Odin first then put in download mode and plug in USB...
Click to expand...
Click to collapse
Thanks, that seems to have worked.
Mods, please delete this thread
Moved to Q&A and closed at op request
I'm new to the captivate.. was going to flash a rom, following thru the instructions im at the point where im flashing back to stock rom with the odin3 oneclick downloader.. but its been just sitting at this for about 20 mins now...
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Is this normal time to take or should i be worried..? and if its stuck what do i do?
Check your drivers and restart your computer is a good place to start
Sent from my SAMSUNG-SGH-I897
You have to quit ODIN. You aren't in download mode, or you haven't done everything in the correct steps. The page isn't very clear, so it's no problem
Here's what you have to do:
Turn your phone off.
Take out the battery, SIM card, External SD card
Put the battery back in.
Hold down both of the volume rockers.
THEN put in the USB cable (while ODIN is open)
Continue to hold down the volume rockers until your phone is recognized by ODIN
Hello, I was going back to stock from 2.2, just like I used to do, opened the good old odin and hitted start. It beggan as usual, printed:
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
and it is being there for the last 5 minutes...
should i restart odin, the phone and try to do it all over again? or is it to late and I should be preparing myself to unbrick my phone?
thx in advance
As long as it's not on boot.bin or sbl.bin you SHOULD be "safe" to disconnect, reboot your computer and try again.
You seem fine. As long as it doesn't say that it's installing sbl.bin and boot.bin (not sure baout the 2nd). You can unplug and restart.
If it freezes at one the 2 above and you unplug, you phone will be bricked and the only way back will be a JTAG (force bootloaders in).
I suggest you use a different usb port/cable and even restart your computer.
EDIT: Damn you Studa
mmm I took out the phone and now i think it is soft bricked now, phone ! computer, though i just managed to put it back in download mode by holding the volume buttons and plugging in the cable, now it is back on stock
thanks guys, I was getting scared
rastanthology said:
mmm I took out the phone and now i think it is soft bricked now, phone ! computer, though i just managed to put it back in download mode by holding the volume buttons and plugging in the cable, now it is back on stock
thanks guys, I was getting scared
Click to expand...
Click to collapse
Sh*t happens, comes with the process/fun
Glad you made it through
rastanthology said:
i think it is soft bricked now, phone ! computer, though i just managed to put it back in download mode by holding the volume buttons and plugging in the cable, now it is back on stock
Click to expand...
Click to collapse
you see this studa? what did you say 5 min ago about jigs in other thread?
TRusselo said:
you see this studa? what did you say 5 min ago about jigs in other thread?
Click to expand...
Click to collapse
Lol!
there was a part in that other statement about "if the button combo is not working"...
thread tag! you're it!
Code:
Odin v.3 engine (ID:24)..
File analysis..
Set PIT file..
DO NOT TURN OFF TARGET!!
This is exactly the state of my ODIN window when I was attempting to flash JF6 from the current Continuum 5 ROM.
Now, I have a phone that does nothing. The power button, volume buttom combo doesnt work it seems. Would a JIG help instead? Any opinions.
I am scared
If your phone exhibits no signs of life at all, Then you need to jtag unbrick your phone...
If you get the phone-!-computer thing on boot, you could just build/buy a jig and force it into download mode
iMohak said:
Code:
Odin v.3 engine (ID:24)..
File analysis..
Set PIT file..
DO NOT TURN OFF TARGET!!
This is exactly the state of my ODIN window when I was attempting to flash JF6 from the current Continuum 5 ROM.
Now, I have a phone that does nothing. The power button, volume buttom combo doesnt work it seems. Would a JIG help instead? Any opinions.
I am scared
Click to expand...
Click to collapse
Your phone could be soft bricked. I has a similar issue. You need to get the phone into download mode. If you can not do this via 3 button combo, you will need a jig. You can search xda for instructions on building your own jig (faster), or simply buy one. It may be cheaper to buy one.
Sent from my SAMSUNG-SGH-I896 using XDA App
Thanks,
The update is - I can do into download mode by pressing the volume down key and power key.
It gets into the yellow download mode, but ODIN3 doesn't work. It now gets stuck at "File Analysis"
Make sure the chord is good, and that is plugged into the back of the pc, not a front usb port. If it's already in the back go ahead and switch ports (still on the back) restart your computer.
studacris said:
Make sure the chord is good, and that is plugged into the back of the pc, not a front usb port. If it's already in the back go ahead and switch ports (still on the back) restart your computer.
Click to expand...
Click to collapse
Its a laptop am using, restarted 10 times. installed samsung usb drivers. tried all the ports. DO NOT TURN OFF TARGET on the phone and the laptop screen.
some times the laptop doesn't even recognise the USB device
All this had happened while flashing the stock jf6 rom
just wondering, are you doing it in the exact order of
1- put phone in download mode - via vol down/power
2- open odin on computer
3- connect usb cable to phone
4- Start button
and when you say sometimes your computer does no recognize your phone, does it show up in the device manager as an unrecognized device or just do nothing at all? If it does nothing at all half the time, go invest in a new usb cable.
i'm not sure how to fix it. but if you had continuum and want to go back to stock, i read somewhere that you can't use Odin3 (something about bootloaders).
i would try to use odin 1.7 to flash GR/Continuum rom.
(but check it with others cause i'm quite newbie)
my #g is not working after Odin3
i'm currently using the canadian rogers version of this phones i used odin3 cuz my phone blanked out on me my phone works now but i'm recieving any 3G network , any reasons as to y and how i can fix it thanx
bubu123 said:
i'm not sure how to fix it. but if you had continuum and want to go back to stock, i read somewhere that you can't use Odin3 (something about bootloaders).
i would try to use odin 1.7 to flash GR/Continuum rom.
(but check it with others cause i'm quite newbie)
Click to expand...
Click to collapse
He can use Odin one click, not the Odin with the button fix. FYI everytime you use Odin one click back to stock 2.1 you're flashing your bootloaders. The problem with the button fix is it only flashes the secondary bootloader leaving the primary bootloader untouched. This is only a problem if you've updated to the.GB bootloaders because you cannot mix Eclair/Froyo bootloader with a Gingerbread bootloader.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
I recently purchased a samsung galaxy phone from someone which had a custom lidroid rom in it.
I am trying to revert back the custom rom to stock using ODIN Odin3 v1.3 as well 1.85. Every time, i connect my device with ODIN, it is stuck in set up connection state itself and doesn't go beyond that.
Additional Info:
I am trying this by putting my phone into download mode by pressing volume up + Home + Power.
Also, when i press Volume Up + Home + Power, the phone just keeps restarting.
Please help. I dont like the lidroid rom.
Some more info: I downloaded the mobile ODIN app, but it says Could Not locate CLockWorkMod Recovery. CWM3, CWM4 or CWM5 is required, but then there is an option to download that add-in which leads to an item not found page....
nishanchi said:
I recently purchased a samsung galaxy phone from someone which had a custom lidroid rom in it.
I am trying to revert back the custom rom to stock using ODIN Odin3 v1.3 as well 1.85. Every time, i connect my device with ODIN, it is stuck in set up connection state itself and doesn't go beyond that.
Additional Info:
I am trying this by putting my phone into download mode by pressing volume up + Home + Power.
Also, when i press Volume Up + Home + Power, the phone just keeps restarting.
Please help. I dont like the lidroid rom.
Click to expand...
Click to collapse
Make sure your phone are i9000 !!!
Reflashing the stock Rom xxjvu android 2.3.6 from Samsung for Galaxy S i9000.
1.Switch off your phone ( if not Bricked )
2.Get into download mode by pressing Power + Valume down + home button together.
3.Launch ODIN you downlaoded from above.
4.Connect your phone via USB to PC
5.If Odin shows com:[port number] in ID:COM in yellow colour, your phone is connected to pc, else reconnect
6.Extract the zip file su-i9000 you downloaded http://hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html.(password: samfirmware.com)
7.Now select files in Odin , click on each tab and select files listed below
PIT –– s1_odin_20100512.pit
PDA –– CODE_I9000XX.....tar.md5,
Phone –– MODEM_I9000XX.......tar.md5,
CSC –– GT-I9000-CSC-.....tar.md5
8.
9.Click start Button now, It starts the Installation Process and then wait for Installation to finish. Your phone will reboot after ODIN displays PASS.
Samtan4326 said:
Make sure your phone are i9000 !!!
Reflashing the stock Rom xxjvu android 2.3.6 from Samsung for Galaxy S i9000.
1.Switch off your phone ( if not Bricked )
2.Get into download mode by pressing Power + Valume down + home button together.
3.Launch ODIN you downlaoded from above.
4.Connect your phone via USB to PC
5.If Odin shows com:[port number] in ID:COM in yellow colour, your phone is connected to pc, else reconnect
6.Extract the zip file su-i9000 you downloaded
7.Now select files in Odin , click on each tab and select files listed below
PIT –– s1_odin_20100512.pit
PDA –– CODE_I9000XX.....tar.md5,
Phone –– MODEM_I9000XX.......tar.md5,
CSC –– GT-I9000-CSC-.....tar.md5
8.
9.Click start Button now, It starts the Installation Process and then wait for Installation to finish. Your phone will reboot after ODIN displays PASS.
Click to expand...
Click to collapse
Thanks for the reply. I did all the things that you mentioned. The ODIN is just stuck with this stack:
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
Any ideas y?
nishanchi said:
Thanks for the reply. I did all the things that you mentioned. The ODIN is just stuck with this stack:
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
Any ideas y?
Click to expand...
Click to collapse
I also tried removing my battery and reinserting it, but that also didn't help....
Also, Make sure your phone are i9000 !!! what does this mean.. The seller told me that this is the phone model and also, i checked the settings>>about phone and it shows this model number there..
nishanchi said:
I also tried removing my battery and reinserting it, but that also didn't help....
Also, Make sure your phone are i9000 !!! what does this mean.. The seller told me that this is the phone model and also, i checked the settings>>about phone and it shows this model number there..
Click to expand...
Click to collapse
use odin v1.7
you may follow this guide, this is more detail. http://nguyenkieuhung1984.blogspot.sg/2012/01/i9000xxjvu-android-236-upgrade-for_07.html
Samtan4326 said:
use odin v1.7
you may follow this guide, this is more detail. [/URL]
Click to expand...
Click to collapse
Even that didn't solve the problem. I even tried taking out the battery and reinserting it, but the ODIN is still stuck in the same place.
nishanchi said:
Even that didn't solve the problem. I even tried taking out the battery and reinserting it, but the ODIN is still stuck in the same place.
Click to expand...
Click to collapse
Do not connect through USB hub
1) KIES process not running in PC tsk manager
2) Try another port
3) Another USB cable
Could also try uncheck "reset time"
Samtan4326 said:
Do not connect through USB hub
1) KIES process not running in PC tsk manager
2) Try another port
3) Another USB cable
Could also try uncheck "reset time"
Click to expand...
Click to collapse
1) KIES process not running in PC tsk manager: KIES not installed
2) Try another port : Tried
3) Another USB cable: Tried
Tried it all, but still ODIN is stuck in setting up connection.
Also, can you please tell me how does the download screen look like. I am seeing 3 options there: reboot, wipe cache paritioning and wipe system data (except sdcard). Is this correct?
Hey
Try installing CM as it has CWM. Then try Downgrading..
Give it a try since u tried almost everything..
tchindalia said:
Hey
Try installing CM as it has CWM. Then try Downgrading..
Give it a try since u tried almost everything..
Click to expand...
Click to collapse
\
I have tried installing CM, it gives a signature verification failed when i try to flash it.....
nishanchi said:
1) KIES process not running in PC tsk manager: KIES not installed
2) Try another port : Tried
3) Another USB cable: Tried
Tried it all, but still ODIN is stuck in setting up connection.
Also, can you please tell me how does the download screen look like. I am seeing 3 options there: reboot, wipe cache paritioning and wipe system data (except sdcard). Is this correct?
Click to expand...
Click to collapse
To get in download mode turn phone off & press: volume DOWN + home button + power button. On your screen a yellow triangle appears
To get in recovery turn phone off & press: volume up + home button + power button. U see what u described above
You are not in download mode!
This is; hold down+home+power
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Start odin
put all files in odin
Connect cable
Wait for yellow connection
Start
Wait
Done
Sent from my GT-I9000 using Tapatalk 2
RobertSand said:
You are not in download mode!
This is; hold down+home+power
View attachment 1519774
Start odin
put all files in odin
Connect cable
Wait for yellow connection
Start
Wait
Done
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Yep, that comend to go to download
and remember nishanchi, if odin stuck on some part of flash, just put some pendrive to other usb it will help
nishanchi said:
1) KIES process not running in PC tsk manager: KIES not installed
2) Try another port : Tried
3) Another USB cable: Tried
Tried it all, but still ODIN is stuck in setting up connection.
Also, can you please tell me how does the download screen look like. I am seeing 3 options there: reboot, wipe cache paritioning and wipe system data (except sdcard). Is this correct?
Click to expand...
Click to collapse
the screen will show you one yellow andriod with downloading.... and Do not turn off Target. if you seeing 3 options is wrong you are boot to recovery mode not download mode.
download mode combo is " power + valume down + home"
Samtan4326 said:
the screen will show you one yellow andriod with downloading.... and Do not turn off Target. if you seeing 3 options is wrong you are boot to recovery mode not download mode.
download mode combo is " power + valume down + home"
Click to expand...
Click to collapse
I am using the same combo as suggested by you and tried everything and everyone has suggested in this post....
When i press Volume UP + Centre button + Power my phone keeps restarting.
Also, you mentioned that 3 options is wrong, but then that is what i get when i press volume down + Power + Centre button....
Also, i see a yellow traingle with android bot and an exclaimation mark inside the traingle... Does this tell you anything about my problem?
nishanchi said:
I am using the same combo as suggested by you and tried everything and everyone has suggested in this post....
When i press Volume UP + Centre button + Power my phone keeps restarting.
Also, you mentioned that 3 options is wrong, but then that is what i get when i press volume down + Power + Centre button....
Also, i see a yellow traingle with android bot and an exclaimation mark inside the traingle... Does this tell you anything about my problem?
Click to expand...
Click to collapse
if you see a yellow traingle with android bot and an exclaimation mark inside the traingle mean you are on download mode, so now you can
1)Launch ODIN you downlaoded
2)Connect your phone via USB to PC
3)If Odin shows com:[port number] in ID:COM in yellow colour, your phone is connected to pc, else reconnect
4)Extract the zip file su-i9000 you downloaded http://hotfile.com/dl/140301534/be88...U_OXA.rar.html.(password: samfirmware.com)
5)Now select files in Odin , click on each tab and select files listed below
PIT –– s1_odin_20100512.pit
PDA –– CODE_I9000XX.....tar.md5,
Phone –– MODEM_I9000XX.......tar.md5,
CSC –– GT-I9000-CSC-.....tar.md5
6)Click start Button now, It starts the Installation Process and then wait for Installation to finish. Your phone will reboot after ODIN displays PASS.
this time you problem should be solved :good:
Try some of these:
1. Install Kies (Kies contains drivers for your phone)
2. Download another version of Odin
3. Try connecting phone to another USB port
4. Try doing the same on some other PC, if your phone starts in download mode and Odin won't install, then it's probably that phone is fine, but your PC or Odin is having trouble accessing to your phone
Dear All,
It's my first time converting from iPhones to Android. Happy to join this community to learn and share.
It was my first amateur experience flashing my Galaxy Note 9.
Basically, I flashed an incorrect file under BL at Odin after OEM Unlock. Phone was running Andriod 9 and it was a N960N (Korean Model)
I downloaded the BL file from another forum that was supposedly to be flashed inside TWRP.
I was stupid enough to change that zip file into a .tar file.
After a successful flash at BL, the phone seems to be bricked. It is unable to go into recovery or download mode.
Whenever I press power, the following message is prompted "KERNEL REV. CHECK FAIL DEVICE:3 BINARY: 2 (BOOT)
I was stupid. Please advise me. Could it be that the volume down button is faulty? I was having a hard time bringing it to download mode at the beginning. I used recovery mode to boot into download mode and then made this big mistake.
Any solution?
Thanks in advance.
This is the Odin Log
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 8 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> cm.bin
<ID:0/009> keystorage.bin
<ID:0/009> sboot.bin
<ID:0/009> up_param.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
<ID:0/009> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
you are flashing older kernal. try to download and install same version of the firmware. Your bootloader version is 3 and your are flashing bootloder version 2. go to sammobile and download stock latest firmware for your device. and flash it through odin. make sure you use odin version 3.13.
Munawar Mehmood said:
you are flashing older kernal. try to download and install same version of the firmware. Your bootloader version is 3 and your are flashing bootloder version 2. go to sammobile and download stock latest firmware for your device. and flash it through odin. make sure you use odin version 3.13.
Click to expand...
Click to collapse
Thank you for taking time to read and comment on my thread. Issue now is that the phone is unable to go into recovery and download mode. Not sure if its the problem physically with the volume down button but the phone is not detected by the PC and unable to enter recovery or download mode.
It is not able to be detected by Odin for me to flash stock files..
Try Samsung Smart Switch on PC .
puddleofmud said:
Dear All,
It's my first time converting from iPhones to Android. Happy to join this community to learn and share.
It was my first amateur experience flashing my Galaxy Note 9.
Basically, I flashed an incorrect file under BL at Odin after OEM Unlock. Phone was running Andriod 9 and it was a N960N (Korean Model)
I downloaded the BL file from another forum that was supposedly to be flashed inside TWRP.
I was stupid enough to change that zip file into a .tar file.
After a successful flash at BL, the phone seems to be bricked. It is unable to go into recovery or download mode.
Whenever I press power, the following message is prompted "KERNEL REV. CHECK FAIL DEVICE:3 BINARY: 2 (BOOT)
I was stupid. Please advise me. Could it be that the volume down button is faulty? I was having a hard time bringing it to download mode at the beginning. I used recovery mode to boot into download mode and then made this big mistake.
Any solution?
Thanks in advance.
This is the Odin Log
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 8 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> cm.bin
<ID:0/009> keystorage.bin
<ID:0/009> sboot.bin
<ID:0/009> up_param.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
<ID:0/009> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
i saw that you went to download mode through recovery.
there is the regular way
to go into download mode...
hold vol down + bixby + power.
Using power + Bixby + vol down to enter download mode has never worked for me. Here's an alternative method:
Make sure the phone is off. Plug your cable into your computer, hold volume down + Bixby (do not touch the power button), and plug the other end of the cable in your phone while still holding the buttons.
oddbehreif said:
Using power + Bixby + vol down to enter download mode has never worked for me. Here's an alternative method:
Make sure the phone is off. Plug your cable into your computer, hold volume down + Bixby (do not touch the power button), and plug the other end of the cable in your phone while still holding the buttons.
Click to expand...
Click to collapse
It didn't work... Please help me..
sunmybun said:
i saw that you went to download mode through recovery.
there is the regular way
to go into download mode...
hold vol down + bixby + power.
Click to expand...
Click to collapse
Phone is not responding to (vol down + bixby +power) or (vol up + bixby + power) or (vol down +bixby)
The phone just keeps showing the same thing.....
JJEgan said:
Try Samsung Smart Switch on PC .
Click to expand...
Click to collapse
Thanks for your time to reply but the phone can't be detected by the computer..
Is there any other way to fix it? Open up the phone or something?
Thank you....
puddleofmud said:
Phone is not responding to (vol down + bixby +power) or (vol up + bixby + power) or (vol down +bixby)
The phone just keeps showing the same thing.....
Click to expand...
Click to collapse
The above combination (plug USB cable to PC, press and hold, vol down + bixby + power..... While still holding, plug in the USB cable to your phone) should actually work cause myself that's the only way i get my note 9 N960N into download mode. Try reinstalling Samsung drivers and possibly try changing the USB-C cable you're using.
puddleofmud said:
It didn't work... Please help me..
Click to expand...
Click to collapse
vol down + bixby + power should work. you have to hold all three until the blue screen comes up.
it should not show the samsung splash screen.
start from fresh.
(make sure data cable is ok, try connecting any other phone to check the cable)
uninstall smartswitch and drivers then restart your pc.
again install latest version of smartswitch.
Run odin as administrator.
now plug one end of cable to pc.
press power+bixby+volume down key as soon as phone vibrates plugin data cable and release power key only. it should go in download mode. if not then try this.
plug cable in pc and phone. Then press power+volume down+bixby button as soon as phone vibrates release power key only. it should go in download mode.