Related
Hi,
I just installed Jelly bean latest kernel with its latest Rom Beta 2. After a while I wanted to change to latest nAn kernel and install a new rom that supports nAn kernel, when i tried to flash this kernel I was just getting a white led on my phone not even able to go in Xrecovery. When i installed the jelly bean kernel everything is normal again. I also saw the uninstall procedures to flash stock kernel which i did the result i got is, Iam just stuck at the sony boot logo no reactions further. Please someone help me to uninstall a kernel and go back to stock kernel with rom installed so that i can change my kernel again. Also let me know if my boot-loader will be relocked. Looking forward for your precious help..
visit this link
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Ask further if you have problems...
Do this! Wipe data, system, cache. Install gb rom. Turn off and flash the kernel u want. Now govin cwm snd wipe data & system again.. Now u can boot
Sent from my E15i using xda premium
http://forum.xda-developers.com/showthread.php?t=1836074
Read
Sent from my X8 using xda premium
Thanks a lot.. worked for me
Hi, This solution worked for me. thanks a lot for the link..
Thank you.. solution was awesome
Hi Guys. short (and maybe dumb) question but i have to be sure before messing up the phone of my friend.
I would like to flash CM11 nightlies with clockworkmod on a Samsung Galaxy Note GT-N7000.
I have read several tutorials for flashing the GT-N7000 and i'm not sure which is the best way to do it.
It is neccesary to update or change the (current stock) kernel? Or is it possible to just copy the recovery and ROM to the SD card, boot into download mode, install from there?
Sorry i only have experience with flashing my HTC One X.
Thanks in advance,
Greetings
I am in the same possition. A friend of mine wants to help him install a custom rom to his n7000.
He has the stock samsung rom and the phone is LAGGY!!
I only have experience with flashing cm11 to my own galaxy s3 with philz touch recovery.
I am reading for 4 hours now and i am lost...
Should i only use TWRP?
but twrp has a version only for cm 10...(i havent found by searching any cm11 twrp version for n7000)
Should i use cm 10 then and all is ok??
Thanks a lot
I am reading things about installing kernel for recovery (philz touch)
After installing that, its just wipe data / cache and install Rom from Zip.
Im still bit confused about the rooting process -> Trough Zip or trough Odin.
I hope some1 can help me.
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
User_99 said:
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
Click to expand...
Click to collapse
Stock rom is currently installed. I uploaded a picture with the specs within an attachment
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
User_99 said:
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
Click to expand...
Click to collapse
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
you also need gapps
eveles said:
you also need gapps (and maybe for later use one custom kernel )
Click to expand...
Click to collapse
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
hosseltietjes1990 said:
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
Click to expand...
Click to collapse
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
Restore instructions :
I don't know if CWM recovery takes he same path to backup as Philz recovery but if it does it pretty simple
- just reboot to recovery and do the steps a to d from the above installation steps and restore backup
But in case you are not able to find backup file in CWM then do this
- reboot to recovery
- flash Philz kernel (same one you flashed during installation )
-go to advanced and select "reboot recovery"
- now you should be in Philz recovery again
- do steps from a to d again and restore
Simple
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
hosseltietjes1990 said:
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
Click to expand...
Click to collapse
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
oh and btw let me tell you that recovery and kernel are in the same partition for N7000 so you can't have "this kernel and that recovery" here as you would in other devices. Thus if you need a certain recovery then you have to flash a certain kernel and if you need a certain kernel then it will install the recovery that comes with it overwriting the previous one. Also even if you flash just recovery somehow, the device will restore the one with the kernel upon reboot
So yeah
REVENGE SOLVES EVERYTHING
tysonraylee said:
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
I just recently flashed my HTC one X And the One X of a friend of mine. No need there to flash the kernel on that phone, only recovery trough adb and flash rom. So i really dont wanna mess with kernels
I you would like to ask something, feel free to ask! Thanks for the support
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
The kernel code name should match the currently installed TW rom (4.1.2) or should it match the CM11 rom you intend to flash (4.4.4)????
to answer my own question : In XxPixX's quide of course it says r5 so 4.4.4 )
Anyway the kernel that you have downloaded is neither r5 nor r1 (i beleive that r1 is for 4.1)
Thanks, i hope someone with more experiense would clarify that!!
eveles said:
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
thanks!!!!!!
Click to expand...
Click to collapse
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
the kernel code name should match the ROM (4.1.2) the one you currently have. Download the philz JB kernel for your JB ROM(follow the steps given in philz kernel thread)
There is no requirement as such for 4.4.4 ROM
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
The download link you have provided links to r6 not r5
r6 says that is only for omniron 4.4
We were talking about cm11.
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
Oh i'm sorry haha. R6 should work right?
edit: sorry i did not read properly. r5 it is then
hosseltietjes1990 said:
Oh i'm sorry haha. R6 should work right?
Click to expand...
Click to collapse
No.
r5 should work.
Dude you are more confused than i am!!
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
yes that should do it, download the k44 one
I haven't seen any videos about that but it is possible to do so but that's just using the recovery temporarily to flash a certain ROM but in the end that recovery is replaced by the ROMs kernel recovery its the same thing we are doing by using raw kernel here in these installation steps but its true that it gets a little confusing
I have updated my previous reply. Please refresh the page to see the explanation
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
R6 is the latest version. Please download the R6-k44.zip
REVENGE SOLVES EVERYTHING
Hi everyone,
I'm new so please be gentle with me -
Have just rooted my Galaxy GT-S5830
Running Gingerbread 2.3.4,
Baseband S5830BVKQB,
Kernel version [email protected]#1,
Build number GINGERBREAD.BVKQ9
using the file for the GT-S5830 from here: ( http://dengadgets.blogspot.co.uk/201...smarphone.html - root_S5830.zip) successfully, copying it to the root folder of the SD card and flashing it from recovery.
I Then tried to flash CWM 4.0.0.9 using the same method (which I got from http://forum.xda-developers.com/show....php?t=1168417 )
Now when I try and reboot in recovery it crashes at the Galaxy Ace screen, otherwise boots fine, and download mode still accessible - not sure why and am unsure about what to do about it. From reading a fair few Q+A posts I think I might need to flash the phone with stock rom using odin, but:
If I do will that wipe my data? (I have data on the phone that I really don't want to lose, particularly on memo - also can't backup on kies as support say the phone is too old and doesn't have that function available - backing it up is one of the main reasons why i'm going through this in the first place...)
Is there another way if it would wipe the data?
How do I avoid getting back in the same mess when flashing CWM?
If I do flash a stock rom / firmware with odin, does it have to be the one that was on there originally [France (Orange)] or can I use the latest UK one (with Gingerbread 2.3.5)?
I really apologise if this has been answered many times - i can't find it but would be grateful to anyone that can help / point me in the right direction
ChildoftheBeat said:
Hi everyone,
I'm new so please be gentle with me -
Have just rooted my Galaxy GT-S5830
Running Gingerbread 2.3.4,
Baseband S5830BVKQB,
Kernel version [email protected]#1,
Build number GINGERBREAD.BVKQ9
using the file for the GT-S5830 from here: ( http://dengadgets.blogspot.co.uk/201...smarphone.html - root_S5830.zip) successfully, copying it to the root folder of the SD card and flashing it from recovery.
I Then tried to flash CWM 4.0.0.9 using the same method (which I got from http://forum.xda-developers.com/show....php?t=1168417 )
Now when I try and reboot in recovery it crashes at the Galaxy Ace screen, otherwise boots fine, and download mode still accessible - not sure why and am unsure about what to do about it. From reading a fair few Q+A posts I think I might need to flash the phone with stock rom using odin, but:
If I do will that wipe my data? (I have data on the phone that I really don't want to lose, particularly on memo - also can't backup on kies as support say the phone is too old and doesn't have that function available - backing it up is one of the main reasons why i'm going through this in the first place...)
Is there another way if it would wipe the data?
How do I avoid getting back in the same mess when flashing CWM?
If I do flash a stock rom / firmware with odin, does it have to be the one that was on there originally [France (Orange)] or can I use the latest UK one (with Gingerbread 2.3.5)?
I really apologise if this has been answered many times - i can't find it but would be grateful to anyone that can help / point me in the right direction
Click to expand...
Click to collapse
Well Download Flashify and Download The Compatible CWM for SGA or Cooper.
It must be the .img file
open the app n choose .img file hit Flash and Reboot.
U Have Probably Crashed your Recovery or flashed incompatible version
Hit THANKS BUTTON
Thank you!
will be busy this week but will try it as soon as I get a chance and will let you know how it goes
ChildoftheBeat said:
Thank you!
will be busy this week but will try it as soon as I get a chance and will let you know how it goes
Click to expand...
Click to collapse
hmm. if u face any problem let me know..i will help u bro
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
wingleaf said:
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
Click to expand...
Click to collapse
Hi!
Maybe this will help: How to use Odin for GT-I9070
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
DjDiabolik said:
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
Click to expand...
Click to collapse
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
kilroy69 said:
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
Click to expand...
Click to collapse
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
DjDiabolik said:
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
Click to expand...
Click to collapse
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
kilroy69 said:
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
Click to expand...
Click to collapse
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
DjDiabolik said:
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
Click to expand...
Click to collapse
This is the right order for me after Odin;
in recovery: wipe, flash update.zip, flash mkkernel zip, flash root.zip and then custom rom + gapps.
I don't flash kernel on custom rom. You know that you need it or not. I think that's unnecessary. I would rather flashing kernel before flashing custom rom.
Hello Guys,
I need a help from you experts please kindly response my Thread.
I do have a N7000 previously it was running 4.1.2 and then i rooted it .
I too dont have a full backup of this 4.1.2 , it was partially backup-ed when i restore it there comes "SYSTEM UI" error while trying to open settings and some apps , so i cant check now USB debugging .
I try to flash the phone from Philz CWM touch 4 recovery every time i get errors [ PhilZ-cwm6-JPLSB-UAE-4.89.4-signed ]
I try these roms : cm-11-20151130-NIGHTLY-n7000 & pa_n7000-5.1-20150628
Error is status 7 i got some posts about it did same inside meta folder on update script but still its throwing same problem .
Here is the snap "https:// www.dropbox.com/s/dgtw2lek5i0ba9o/4.jpg?dl=0 " <<remove 1 space after https:// >> i just had renamed the ROM ZIP name there in snap while i had reZip it after editing updater script
Problem is I have no firmware on my phone and i cant USE it , if i restore my previous 4.1.2 then it throws SYSTEM UI error & i am not being able to flash any custom ROM .
Please , kindly response in detail so that i will understand what should i do to make my phone as Normal or How can i solve flash error
Thanks in advance
Anuj
Status 7 means your kernel can't support your rom because you are installing different android versions (lollipop rom with jellybean kernel for example), you need to do a full wipe from custom recovery before you can install anything.
Try an Odin flash for stock rom, you don't need USB Debugging for it.
Follow the guide here for flashing instructions
AutumQueen92 said:
Status 7 means your kernel can't support your rom because you are installing different android versions (lollipop rom with jellybean kernel for example), you need to do a full wipe from custom recovery before you can install anything.
Try an Odin flash for stock rom, you don't need USB Debugging for it.
Follow the guide here for flashing instructions
Click to expand...
Click to collapse
Mate i had done full wipe from Custom recovery as you told and then i had tried to install but status 7 .
h1dd3n_sn1p3r said:
Mate i had done full wipe from Custom recovery as you told and then i had tried to install but status 7 .
Click to expand...
Click to collapse
Hmmmm turn off your phone, download a stock rom and ODIN flash it. Then follow the instructions from the link I posted (installing from stock) if you want to use a custom rom.
AutumQueen92 said:
Hmmmm turn off your phone, download a stock rom and ODIN flash it. Then follow the instructions from the link I posted (installing from stock) if you want to use a custom rom.
Click to expand...
Click to collapse
Mate sorry newbie here can u please share link for Stock rom and ODIN that will be great help
h1dd3n_sn1p3r said:
Mate sorry newbie here can u please share link for Stock rom and ODIN that will be great help
Click to expand...
Click to collapse
Ahhh, got it. Welcome to the forums!
I used this guide for all my starting out needs. You will need to determine what stock rom you want to install (I suggest Jellybean versions since they don't have a fatal bug) then prepare everything before flashing.
Use this link before Odin flashing if you are interested in increasing your storage space.
And this thread has a list of recoveries for stock roms.
Rule of thumb when flashing is lay out all the stuff you need, determine the steps then proceed.
AutumQueen92 said:
Ahhh, got it. Welcome to the forums!
I used this guide for all my starting out needs. You will need to determine what stock rom you want to install (I suggest Jellybean versions since they don't have a fatal bug) then prepare everything before flashing.
Use this link before Odin flashing if you are interested in increasing your storage space.
And this thread has a list of recoveries for stock roms.
Rule of thumb when flashing is lay out all the stuff you need, determine the steps then proceed.
Click to expand...
Click to collapse
Hmmm ... Thanks mate let me try and i will post the feedback
Currently i am downloading firmware and i will try to flash it with ODIN .
Thanks lot lot help @AutumQueen92
AutumQueen92 said:
Ahhh, got it. Welcome to the forums!
I used this guide for all my starting out needs. You will need to determine what stock rom you want to install (I suggest Jellybean versions since they don't have a fatal bug) then prepare everything before flashing.
Use this link before Odin flashing if you are interested in increasing your storage space.
And this thread has a list of recoveries for stock roms.
Rule of thumb when flashing is lay out all the stuff you need, determine the steps then proceed.
Click to expand...
Click to collapse
Thanks Mate the problem is solved now ...
Actually i did not used ODIN but was about to use it but,
I tryed to flash " Nightowl-cm12-BETA3-n7000-Kernel-only.ZIP " and reboot the recovery ... Then i try to install "cm-11-20151130-NIGHTLY-n7000" ROM and now that worked perfectly .
Now Phone is running CM11 KITKAT 4.4.4 but still i forget to flash Gapps . Hope now i can flash Gapp ..
Thank you for all your assists :good::good::good: