Database Develop

[Q] Rooted upgrade to 4.4.2 process

Hey everyone,
When 4.4.2 is released for the X, what do I need to do to upgrade? I have the Verizon DE Moto X stock rooted. I assume I just need to reflash the stock recovery, install the update, reflash TWRP, and flash the root zip. Is that right?
Thanks!

guitarbedlam said:
Hey everyone,
When 4.4.2 is released for the X, what do I need to do to upgrade? I have the Verizon DE Moto X stock rooted. I assume I just need to reflash the stock recovery, install the update, reflash TWRP, and flash the root zip. Is that right?
Thanks!
Click to expand...
Click to collapse
I am in the same situation and I was thinking the same thing. I planned on flashing (through fastboot) the stock recovery from the factory image I downloaded from Motorola, install update, reflash (through fastboot) TWRP, and then let TWRP root when I reboot.
I sure hope it is that easy but for some reason I am thinking it's not. Makes me appreciate my GNex a little more.

KnappyRoot said:
I am in the same situation and I was thinking the same thing. I planned on flashing (through fastboot) the stock recovery from the factory image I downloaded from Motorola, install update, reflash (through fastboot) TWRP, and then let TWRP root when I reboot.
I sure hope it is that easy but for some reason I am thinking it's not. Makes me appreciate my GNex a little more.
Click to expand...
Click to collapse
You also need to have root removed and any mods with root access removed as well, any system files frozen, deleted must be re-installed
Sent on my Gummy running Lenoto X

guitarbedlam said:
Hey everyone,
When 4.4.2 is released for the X, what do I need to do to upgrade? I have the Verizon DE Moto X stock rooted. I assume I just need to reflash the stock recovery, install the update, reflash TWRP, and flash the root zip. Is that right?
Thanks!
Click to expand...
Click to collapse
that is correct

[Q] Stock Rom for XT1060

I have dug around a bit and I can't seem to find a TWRP flashable stock rom for the VZW XT1060. Now that I'm liberated (BL unlocked), I am hoping to have a quick and easy way to recover when I **** up my phone. Can I use stock roms for other Moto X variants or should I just be patient and wait for someone to come out with this?

Just make a backup before you start playing, and you're all set.

If you **** up your phone, use the SBF files and flash them manually.

nhizzat said:
If you **** up your phone, use the SBF files and flash them manually.
Click to expand...
Click to collapse
yea.. thats always the fallback.. but flashing stock rom via twrp or cwm so much faster and able to regain root quickly

grimez said:
I have dug around a bit and I can't seem to find a TWRP flashable stock rom for the VZW XT1060. Now that I'm liberated (BL unlocked), I am hoping to have a quick and easy way to recover when I **** up my phone. Can I use stock roms for other Moto X variants or should I just be patient and wait for someone to come out with this?
Click to expand...
Click to collapse
There is no version of the Stock rom that is flashable via TWRP or CWM.
SBF file is out but you must flash via RSDLite, or manually flash via mfastboot. The only "flashable" via recovery "option" out there would be the OTA UPDATE which is not a full rom, and it isn't flashable via TWRP or CWM either.
I don't expect anyone to come out with anything flashable via TWRP/CWM for the stock rom.
It is not recommended to flash X Roms for other variants like the XT1058/XT1053/etc on the Verizon X XT1060 due to radio, and other components.

Flash with RSD or OTA?
Hi all, am hoping soomeone my know this as I have not come across a detail answer for it yet...I have DE still on the original 4.2.2 pre camera. Is there a best way to upgrade to kit kat , either 4.4 or 4.4.2 and be able to have the most "options" left (ie: I wont be able to re-root or intstal Phils recovery) for my device . Any insight would be apreciated. Thanks.

kerryh420 said:
Hi all, am hoping soomeone my know this as I have not come across a detail answer for it yet...I have DE still on the original 4.2.2 pre camera. Is there a best way to upgrade to kit kat , either 4.4 or 4.4.2 and be able to have the most "options" left (ie: I wont be able to re-root or intstal Phils recovery) for my device . Any insight would be apreciated. Thanks.
Click to expand...
Click to collapse
If you have a DE, you can unlock the bootloader (without voiding warranty) at any time, and install a custom recovery to root.
As far as upgrade path, it depends on if you are stock, or how close to stock if you have modified it. If stock, just take the OTA's, one at a time, to keep your settings, data, apps.
The OTA Update files have a manifest in them containing a list of files, and check sums for those files, which it needs on your phone. If files it wants to be there are missing from your phone or do not match the check sum in the manifest, the OTA will fail (which is why I say depends on if you are stock). If you've removed or replaced any files, you'll need to put them back. You'll also need stock recovery for any OTA to install.
An "easy" way to update is to download the SBF file for the version you want on your phone from -> http://sbf.droid-developers.org/phone.php?device=0 unzip it. Edit the XML file and, if it exists, remove the line for erase partition userdata. Then flash using RSDLite.
With the unlocked bootloader, you can then flash TWRP, CWM or other custom recovery and install SuperSU to root if needed.

grimez said:
I have dug around a bit and I can't seem to find a TWRP flashable stock rom for the VZW XT1060. Now that I'm liberated (BL unlocked), I am hoping to have a quick and easy way to recover when I **** up my phone. Can I use stock roms for other Moto X variants or should I just be patient and wait for someone to come out with this?
Click to expand...
Click to collapse
Recently saw both stock odexed and stock deodexed rooted 4.2.2 for unlocked VZW XT1060 posted over on DroidRzr.com

KidJoe said:
There is no version of the Stock rom that is flashable via TWRP or CWM.
Click to expand...
Click to collapse
For the Verizon XT1060 there is now -> http://forum.xda-developers.com/moto-x/development/rom-stock-vzw-4-4-2-developer-editions-t2693591

[Q] Regarding SoftBrick of Moto X XT1052

Sorry If this is a newbie question.
SO here is my Story.
I Was trying to flash the Epsilon Project ROM for my Moto X 1052. So I first created a Nandroid Backup of My Kitkat 4.4.4 Stock ROM.
But When I was wiping my data Cache and dalvik i accidentally cleared all my internal storage. The Stock ROM was completely wiped and my cell was stuck at Bootloader Unlocked warning message.
Suddenly i got an idea and I flashed The Epsilon ROM using OTG Cable. The device booted succesfully. But if I want to go to the stock rom back then should i restore my Nandroid or I should follow the RSDLite method.
Does flashing the custom ROM using the OTG have any effect on the Bootloader because I heard that Downgrading the bootloader from 4.4.4 to 4.4.2 bricks the phone. Is my bootloader is still on 4.4.4?
Thanks

Nandroid or use fastboot. Why would flashing a rom using an OTG cable be any different from having your phone connected to a computer? The only way your bootloader would be on 4.4.2 is if you flashed a 4.4.2 rom, but that wouldn't be successful.
Why doesn't anybody use fastboot anymore?

I used to have a Samsung device. Everything was flashed using Odin and it had extSdCard slot also.
So dealing with so many commands freak me out. That's why I dont use fastboot. (don't know about others)
Thnks for your reply

nhizzat said:
...The only way your bootloader would be on 4.4.2 is if you flashed a 4.4.2 rom, but that wouldn't be successful
Click to expand...
Click to collapse
Actually, even if you bricked downgrading to 4.4.2, the bootloader wouldn't be downgraded.
I've not seen anyone able to downgrade their bootloader, bricking or not. If it is possible, that gives some hope to all those 4.4.4 VZW users with locked bootloaders, who can't use sunshine currently...

moto x 1st gen 4.2.2 Upgrade to 5.1

Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Question:
To upgrade to 5.1 do I just need to revert back to stock boot loader and do an OTA update?
Will the OTA re-lock my boot loader?
After the upgrade to 5.1 do I just reload TWRP recovery and flash SU for root access again?

No the new updates do not relock the bootloader. I suggest you first try out the Lollipop by flashing it through latest version of TWRP. If you think you can live with it than just flash complete stock through rsdlite or manually by fastboot. Reason I say that is because once you take the OTA it will update both bootloader version and the partition tables which means you won't be able to revert back to a lower Android version without the risk of bricking your device.
Sent from my Moto X

bushako said:
No the new updates do not relock the bootloader. I suggest you first try out the Lollipop by flashing it through latest version of TWRP. If you think you can live with it than just flash complete stock through rsdlite or manually by fastboot. Reason I say that is because once you take the OTA it will update both bootloader version and the partition tables which means you won't be able to revert back to a lower Android version without the risk of bricking your device.
Sent from my Moto X
Click to expand...
Click to collapse
I don't want to go back to complete stock, I want to keep bootloader unlocked and root. Is there a stock rooted rom out there I can flash w/ TWRP without having to do OTA or flashing the recovery back to stock?

Yes there is its in the development section. You'll read the thread something like xt1053 stock flash-able. It contains only the kernel and system files so you should be good.
Here http://forum.xda-developers.com/showthread.php?t=3155843
Sent from my Moto X

-RanZ- said:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Question:
To upgrade to 5.1 do I just need to revert back to stock boot loader and do an OTA update?
Will the OTA re-lock my boot loader?
After the upgrade to 5.1 do I just reload TWRP recovery and flash SU for root access again?
Click to expand...
Click to collapse
First off, there is no Verizon 5.1 yet. So any 5.1 you try will be for a different model, and if you flash a full rom, it will have different radios (which don't work for CDMA that Verizon still uses for voice/3g data. If you keep your stock VZW radio files, keep in mind they will be on a different version than the rest of the rom which could cause some inconsistencies and issues. IF you do flash a FULL SBF, you will be stuck with no SAFE way to revert to 4.4.4 due to GPT.BIN/Motoboot.img (for more on this, see the link in my signature), and you'll have to wait for the Verizon 5.1 SBF to get back to Verizon's rom.
Next, to install an OTA update, when it becomes available, you need STOCK RECOVERY on your phone. The OTA also does a pre-flash check/validation of your phone before it flashes, so if anything it looks for is not what it expects, the OTA will fail. Because of that you need to be 100% stock, or very near to it.
Finally, NO, an OTA will not relock your bootloader, nor will flashing an SBF.
For more on taking an OTA, see the link in my signature on OTA Updates..
That being said, if you TRY a 5.1 rom that is out there for another model you best bet is to find one that is a TWRP back up of 5.1 installed on someone's phone, since it only updates system.img and boot.img. It may not work 100% (because part of your phone will still have the 4.4.4 files), but it will give you a taste and you could later revert back to the stock 4.4.4 which you currently have on your phone. IF you flash a FULL SBF, you might be stuck with no way to revert to 4.4.4 due to GPT.BIN/Motoboot.img (for more on this, see the link in my signature)

Hi Bushako, I've Moto X Verizon XT1060 and it's struck in 4.2.2 android. When I try to update using setting, about phone and system update it show there is no update available but the android version on it is 4.2.2

5.1 is available for Verizon Moto X 1st gen now isn't it? I am googling for a detailed process on how to update from 4.2.2 to 5.1 and keeping root but not having any luck finding anything. Is it easy to update from 4.2.2 stock rooted to 5.1? The specs of my phone are the same as the original post:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery

-RanZ- said:
5.1 is available for Verizon Moto X 1st gen now isn't it? I am googling for a detailed process on how to update from 4.2.2 to 5.1 and keeping root but not having any luck finding anything. Is it easy to update from 4.2.2 stock rooted to 5.1? The specs of my phone are the same as the original post:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Click to expand...
Click to collapse
Aug 1, when I last posted in this thread, Verizon 5.1 wasn't available. It is now.
As for updating and keeping root, there are a few ways to do it. Since you say your Bootloader is unlocked, the best way is flash 5.1 SBF, and use the process of flashing TWRP and SuperSU to root and have Write protection Disabled (see -> http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217 ). If you're bootloader isn't unlocked yet, and if you are on 4.4.2 or lower and have NEVER upgraded to 4.4.4 or 5.1, use Sunshine to unlock the bootloader FIRST
If you're bootloader isn't unlocked, there is only one way to root 5.1, but it doesn't disable write protection, and its risky because it intentionally soft bricks the phone back to the Qualcomm HS-USB QDLoader mode.

KidJoe said:
Aug 1, when I last posted in this thread, Verizon 5.1 wasn't available. It is now.
As for updating and keeping root, there are a few ways to do it. Since you say your Bootloader is unlocked, the best way is flash 5.1 SBF, and use the process of flashing TWRP and SuperSU to root and have Write protection Disabled (see -> http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217 ). If you're bootloader isn't unlocked yet, and if you are on 4.4.2 or lower and have NEVER upgraded to 4.4.4 or 5.1, use Sunshine to unlock the bootloader FIRST
If you're bootloader isn't unlocked, there is only one way to root 5.1, but it doesn't disable write protection, and its risky because it intentionally soft bricks the phone back to the Qualcomm HS-USB QDLoader mode.
Click to expand...
Click to collapse
Bootloader is unlocked, I get the warning every time I restart the phone.
Where can I find the SBF files? Every post I find from a search the links do not work.
Are the SBF files stock or from someone else's phone?
Do I flash the files with my currently installed TWRP?
When I flash the SBF does it remove TWRP so I have to re flash it?
Are there any radio upgrades/do they get done w/ the SBF?
Sorry if these are basic questions, I have not done much phone rooting since my old HTC Incredible.

-RanZ- said:
Bootloader is unlocked, I get the warning every time I restart the phone.
Where can I find the SBF files? Every post I find from a search the links do not work.
Are the SBF files stock or from someone else's phone?
Do I flash the files with my currently installed TWRP?
When I flash the SBF does it remove TWRP so I have to re flash it?
Are there any radio upgrades/do they get done w/ the SBF?
Sorry if these are basic questions, I have not done much phone rooting since my old HTC Incredible.
Click to expand...
Click to collapse
There is a link in my signature to a thread containing the known places that were hosting the SBF/FXZ files. That is the only place I can suggest you look.
SBF/FXZ files I'm taking about are stock, and digitally signed by Motorola. They can be flashed on phones with locked or unlocked bootloaders. NOTE: make sure you get the SBF for your device model and carrier!!
You flash these via Mfastboot or RSDLite. When using these tools you are flashing back to stock. After you get the SBF file, see -> http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 and read the REQUIREMENTS section, and pick either Option 3, 4 or 5 to actually flash (only use one option. which ever you find the easiest. Do NOT use Option 1 or 2 as they would not apply to your situation). I usually recommend option 5.
Yes, the process of flashing the entire SBF will overwrite TWRP with stock recovery. You'll need to flash it later as part of the rooting process.
Yes there are radio updates in the newer SBF files.
So basically, you flash to stock 5.1 by using the SBF files (following the requirements and ONE of the options in http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 again,I usually recommend option 5), then root by following http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217
One other tip... Make a back up of your phone BEFORE YOU FLASH. copy all data from the /sdcard area to your PC, make a list of all your apps, etc. And seriously consider erasing your UserData while flashing (wipes the phone clear), or doing a factory reset before you flash.
I only say this because 5.1 seems more stable (and less buggy) if a factory reset is done before/during the upgrade process.
EDIT: The 5.1 SBF file you want for a Verizon XT1060 is GHOST_VERIZON_5.1_LPA23.12-39.7_cid2_CFC.xml.zip and is available from -> http://motofirmware.center/files/category/11-moto-x-1st-generation/

KidJoe said:
There is a link in my signature to a thread containing the known places that were hosting the SBF/FXZ files. That is the only place I can suggest you look.
SBF/FXZ files I'm taking about are stock, and digitally signed by Motorola. They can be flashed on phones with locked or unlocked bootloaders. NOTE: make sure you get the SBF for your device model and carrier!!
You flash these via Mfastboot or RSDLite. When using these tools you are flashing back to stock. After you get the SBF file, see -> http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 and read the REQUIREMENTS section, and pick either Option 3, 4 or 5 to actually flash (only use one option. which ever you find the easiest. Do NOT use Option 1 or 2 as they would not apply to your situation). I usually recommend option 5.
Yes, the process of flashing the entire SBF will overwrite TWRP with stock recovery. You'll need to flash it later as part of the rooting process.
Yes there are radio updates in the newer SBF files.
So basically, you flash to stock 5.1 by using the SBF files (following the requirements and ONE of the options in http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 again,I usually recommend option 5), then root by following http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217
One other tip... Make a back up of your phone BEFORE YOU FLASH. copy all data from the /sdcard area to your PC, make a list of all your apps, etc. And seriously consider erasing your UserData while flashing (wipes the phone clear), or doing a factory reset before you flash.
I only say this because 5.1 seems more stable (and less buggy) if a factory reset is done before/during the upgrade process.
EDIT: The 5.1 SBF file you want for a Verizon XT1060 is GHOST_VERIZON_5.1_LPA23.12-39.7_cid2_CFC.xml.zip and is available from -> http://motofirmware.center/files/category/11-moto-x-1st-generation/
Click to expand...
Click to collapse
I will give this a try if I can locate the correct SBF files, your information has helped greatly, Thanks!

nevermind, google fixed me.

Moving MM 6.0 from un-rooted xt1068 titan to rooted xt1068 titan?

Hello
I am new to the rooting scene and my knowledge is limited, I have tried searching the forums but can't find the info I am looking for if any one can help or offer any information and point me in the right direction that would be great.
I have two identical phones both Moto G xt1068 titan dual sim variants. One phone I have unlocked the boot loader rooted and flashed cyanogenmod 13.0 and the other phone is fully stock MM 6.0.
When I rooted my 1st phone I was silly and didn't back up my recovery or I didn't exactly know how. What I am wanting to do is take a copy of the official MM 6.0 from my 2nd phone and move it to my rooted phone and also make a backup of the original recovery if that is possible without rooting or harming the OS on my original phone.
So my thinking is this.
I would unlock the boot loader on my stock phone and then from fastboot menu run TWRP "fastboot boot twrp.img" and then use that to backup the System / Data / Recovery Partitions.
Am I right in thinking that because I only booted into TWRP, that once I reboot my phone the original recovery and system will be all intact and all I would need to do is re-lock the bootloader?
And finally would I then be able to use the backup I made of my stock phone and restore this onto my 2nd phone were I can then root and make changes to my hearts content?
Is this possible? am I going about this the wrong way? any help or advice is very much appreciated and I hope I have explained in a way that makes sense.
Thank You