[Q] Xperia V, trouble installing CM12 - Sony Xperia T, TL, TX, V

Hello
I have unlocked BL and rooted.
I've been trying to install CM12 on my Xperia V but everytime I'm in recovery and trying to flash CM12 it just aborts in the middle of it, and if i remember it gives an error a long the lines of "device is mint, rom isn't" I tried this rom http://forum.xda-developers.com/xpe.../rom-cyanogenmod-12-neo-s-homebuilds-t2967819
Since that pretty much bricked the phone Im back on stock JB [4.3] and I actually tried it twice, and no luck. Haven't tried any other roms since re-rooting and installing cwm/twrp is such a pain with xperia V and im not interested in anything else other than CM11/12.
I tried search but no luck
So, the question is, whats the most painless way to get CM11/12 on my phone, and what do I have to keep in mind while doing it. I'm very new to the phone and haven't figured out everything that I need to know I suppose.
Heres some "about phone"
Model : LT25i
Android ver: 4.3
Kernel ver: 3.4.0
Build number: 9.2.A.2.5

Either remove the first line in my rom zip/META-INF/com/google/android/updater-script (this will disable device verification, so do so at your own responsibility), then repack the rom zip and flash - or fastboot flash my rom's boot.img before installing the zip itself.

WhiteNeo said:
Either remove the first line in my rom zip/META-INF/com/google/android/updater-script (this will disable device verification, so do so at your own responsibility), then repack the rom zip and flash - or fastboot flash my rom's boot.img before installing the zip itself.
Click to expand...
Click to collapse
Thanks for the fast answer. So I'll just root and install twrp yet again, then flash your boot.img in with flashtool and THEN wipe/factory reset from twrp and install your ROM, right ?

villur700 said:
Thanks for the fast answer. So I'll just root and install twrp yet again, then flash your boot.img in with flashtool and THEN wipe/factory reset from twrp and install your ROM, right ?
Click to expand...
Click to collapse
Actually, no need for root and twrp. Just go ahead, flash the kernel, then reboot to recovery and follow the installation steps in my CM12 thread

Related

[Q] Help crash after flash

First of all sorry for my English...
Yesterday I was trying to install vanir room to my p880 after 10 hours I rooted the phone and unlock the bootloader then installed cwm but after reboot I get stuck on logo so I used kdz and load LGP880AT-00-V20a-262-000-MAR-26-2013+0 with (after 4 hours ) then i try using twrp and finally load the room (vanir_p880_4.4.4.112414.zip) and Gapps after rebooting I started getting crashes ( aosp keyboard, com.google, home and back buttons etc didn't work)
so again kdz then i try other room Paranoid but the same thing..
What I'm doing wrong? I used factory reset, wipe etc but same results
what gapps you flashed?
blansh heretics
The ones that are here http://forum.xda-developers.com/showthread.php?t=2439739
But I load another rom without gapps and got same errors, wizard stopped, com.Google stopped. And keyboard.
G0ll0 said:
The ones that are here http://forum.xda-developers.com/showthread.php?t=2439739
But I load another rom without gapps and got same errors, wizard stopped, com.Google stopped. And keyboard.
Click to expand...
Click to collapse
I don't really know what happened, did you successfully flashed kdz?
Where did you get it from? Here?: http://lg-phone-firmware.com/index.php?id_mod=15
Try to flash one of these (choose correct one for you)
Than you have to install recovery again.
But before that you can try to wipe /system, /data, /cache and then flash CM11 (I know it works without problems)
And I recommend you these Gapps: http://forum.xda-developers.com/showthread.php?t=2397942
LGaljo said:
I don't really know what happened, did you successfully flashed kdz?
Where did you get it from? Here?: http://lg-phone-firmware.com/index.php?id_mod=15
Try to flash one of these (choose correct one for you)
Than you have to install recovery again.
But before that you can try to wipe /system, /data, /cache and then flash CM11 (I know it works without problems)
And I recommend you these Gapps: http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
well... yes i think I flashed kdz (LGFlashTool ?) I used kdz to recover my phone to original, I know my phone is Korean version and right now I use P88020A-EUR-XXX original firmware installed with kdz
What is CM11? and how i flash it?
so I have to root and unlock bootloader again and use twrp again right?
G0ll0 said:
well... yes i think I flashed kdz (LGFlashTool ?) I used kdz to recover my phone to original, I know my phone is Korean version and right now I use P88020A-EUR-XXX original firmware installed with kdz
What is CM11? and how i flash it?
so I have to root and unlock bootloader again and use twrp again right?
Click to expand...
Click to collapse
I think you should try with CWM first, get it: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.5-p880.img
you can flash it with this app if you are rooted: https://play.google.com/store/apps/details?id=com.cgollner.flashify
then you can download CM11 from here: http://download.cyanogenmod.org/?device=p880
and gapps from last mine post
and then boot to recovery, do factory reset and wipe /system, then flash rom and gapps.
Hope it helps
Crash After Flash OTA Vanir 5.0
I had a similar experience. I was installing OTA latest update of Vanir...not realising that it was 5.0...a screen came up telling me that it needed to flash another recovery...not realising why it needed that, I ignored the request to flash. Of course, I then "bricked" the phone. I was able to install the original JB 4.12 (v20c) back onto the phone but now it won't root. I've tried almost every method in this forum to no avail.:
ADB just gives a message "error: closing" when I use the boot.exe method
o4xr method does nothing
all-in-one method also does nothing
ADB does recognise the device. Drivers are installed. Any help is welcome!
BermiePT said:
I had a similar experience. I was installing OTA latest update of Vanir...not realising that it was 5.0...a screen came up telling me that it needed to flash another recovery...not realising why it needed that, I ignored the request to flash. Of course, I then "bricked" the phone. I was able to install the original JB 4.12 (v20c) back onto the phone but now it won't root. I've tried almost every method in this forum to no avail.:
ADB just gives a message "error: closing" when I use the boot.exe method
o4xr method does nothing
all-in-one method also does nothing
ADB does recognise the device. Drivers are installed. Any help is welcome!
Click to expand...
Click to collapse
Have you tried to flash a recovery using fastboot? You won't need to root (if you are going to use a custom ROM) and/or it will be easier with a custom recovery
Soft brick after last update.
Hello,
I seem to have a similar problem. I updated a few days ago using Vanir updater. There were no warnings re updating the recovery, just a warning regarding losing root. I checked restore root. The phone rebooted to the bootloader logo, then to a black screen. Now, I can access Cyanogen recovery, SW update mode, abd fastboot mode using buttons and the recovery options. ADB can see the phone only in recovery mode, but not in fastboot or SW update mode. CM recovery has no option to mount USB storage, so my PC cannot see the phone, and I cannot side load a new recovery and flash a new ROM.
Is there any way to use ADB if it cannot see your phone in fastboot or SW mode? Perhaps modify the settings.secure string to enable ADB? ADB can see the phone in recovery mode.
Otherwise I will try flashing a stock ROM via KDZ or LG firmware update tool, the re-root and proceed - but rooting was a major ordeal the first time, so I would like to avoid doing that again.
Thanks in advance.

T stuck in recovery mode,ROM not installing,5% battery.

So I decided to install cyanogenmod WhiteNeo ROM on my xperia T
did the entire process alright.
for recovery, CWM din't work so downloaded app from playsore and got TWRP from there.
the followed the steps from here to reach till step 8 from wiki.cyanogen guide.
stuck at step 8. DOn't get how to perform it because it is confusing.
altenrately sentthe zip package to sd card and tried there but says Error executing updater binary in zip.
I am stuck.
5%battery left.
and I dont know what to do.
can't even get out of Recovery mode.
device is unresponsive when connected to USB and is powered off.
can anyone please sort this out and explain in simple words how to get out of this mess?
p.s: if battery expires,then what happens?
tried installing stock firmware using flashtool
but
07/014/2015 19:14:54 - ERROR - Error in processHeader
all the time
googled all the solutions
none works
help please?
You should be able to flash official CM12 and proceed from there.
First, revert to stock FOTAKernel, then flash my ROM's boot.img via Fastboot mode in Flashtool. Then reboot to TWRP and check versions. Should be 2.8.7.0.
Then flash the ROM zip, gapps and supersu. Done.
WhiteNeo said:
You should be able to flash official CM12 and proceed from there.
First, revert to stock FOTAKernel, then flash my ROM's boot.img via Fastboot mode in Flashtool. Then reboot to TWRP and check versions. Should be 2.8.7.0.
Then flash the ROM zip, gapps and supersu. Done.
Click to expand...
Click to collapse
Thankyou soo much!
could you just elaborate a bit on how to revert to stock FOTA kernel and check TWRP version. confused about that.
btw... how do I use CM recovery instead of TWRP?
also if you have time.
another issue
before you posted this, I already flashed CM12 official, it works fine. But I am having an issue flashing gapps.
have tried
gapps-L-4-21-15.zip
pa_gapps-stock-5.0.1-20150215-signed (1).zip
gapps-lp-20141212-signed (1).zip
For installing
proceeded to install through sdcard and in recovery mode.
installs fine.
as soon as phone starts, google errors(stopped working) start spamming the screen and pressing ok just causes more to come.
reset all to factory version, reinstalled cyanogenmod with gapps, still no good.
can you point out the correct process for it or where am I going wrong.
aber96crombie said:
Thankyou soo much!
could you just elaborate a bit on how to revert to stock FOTA kernel and check TWRP version. confused about that.
btw... how do I use CM recovery instead of TWRP?
also if you have time.
another issue
before you posted this, I already flashed CM12 official, it works fine. But I am having an issue flashing gapps.
have tried
gapps-L-4-21-15.zip
pa_gapps-stock-5.0.1-20150215-signed (1).zip
gapps-lp-20141212-signed (1).zip
For installing
proceeded to install through sdcard and in recovery mode.
installs fine.
as soon as phone starts, google errors(stopped working) start spamming the screen and pressing ok just causes more to come.
reset all to factory version, reinstalled cyanogenmod with gapps, still no good.
can you point out the correct process for it or where am I going wrong.
Click to expand...
Click to collapse
Reverting to stock FOTA and getting official CM recovery (which won't flash anything but official CM builds and gapps) can be done with flashtool and a suitable ftf or using a Terminal command that you will find on the last pages of my CM12.1 thread for Xperia T.
TWRP version should be visible in settings or what one would call a "status bar".
And the force-closing gapps are just the result of a broken or outdated recovery. I've already been reported the same issue after creating a FOTAKernel TWRP for a friend.
You should be able to flash official CM12 gapps from Cyanogen Recovery.. Just google those.

Xperia Z is stuck in boot loop after Dual recovery install

Hey, Im pretty new to xda so forgive me if this is in the wrong forum. I Have a c6606 Tmobile xperia z that i flashed to c6616 4.4.2 then OTA updated it to 5.0.2. I rooted with kingroot root and then did a the method of removing kingroot and replacing it with superSU. I go to install dual recovery from [NUT]'s page and go with option 1, Install rom rooted with superSU. Everything works up until it trys to reboot into the launcher like normal. I can get into recovery but it just wont do a full boot and it goes into a boot loop. I did a factory reset like it said in the tutorial but still boot loop. After trying different flash options with flash tools I'm at a stand still until i can get this fixed. Also one other thing, is it normal to have poor signal after flashing to c6616 ftf? I know someone else mentioned this in a thread but i didnt really see an anwser. Any help appreciated ladies and fellas
HI, i've read that Xperia Z T-Mobile brand have the bootloader locked, and it's not unlockable, you can flash CUSTOM ROM but must have STOCK KERNEL otherwise you get always a bootloop...
Wich CUSTOM ROM have you tried to flash?
i had the same problem with my c6603
1. Just install stock rom ftf
2. Install TWRP Recovery
3. Boot into TWRP
4. Factory Reset & Cache/Dalvic wipe
5. Flash Custom Rom
6. Wipe Dalvic/Cache again
7. Boot into ROM
8. Open Shell
9. Make a clean install of twrp with dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/ ...
Should work
Fixed
Xperience Z said:
i had the same problem with my c6603
1. Just install stock rom ftf
2. Install TWRP Recovery
3. Boot into TWRP
4. Factory Reset & Cache/Dalvic wipe
5. Flash Custom Rom
6. Wipe Dalvic/Cache again
7. Boot into ROM
8. Open Shell
9. Make a clean install of twrp with dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/ ...
Should work
Click to expand...
Click to collapse
Got it to work finally! Just tinkered around till i got it to work. Thanks for the help though boys!:good:

Downgrading from Marshmallow if I have custom recovery

Hi everyone, this question was asked already but I just want to make sure that it's safe to flash a 5.1 based ROM over a currently active Marshmallow ROM using TWRP using only the usual wipes? I remember that I had to flash a custom boot image with a PC or something like that in order for the custom recovery to work on my K3 Note, which I received with Marshmallow installed, so I'm not sure if I can hop back to 5.1 if phone never even had it installed. Any advice?
livgrave said:
Hi everyone, this question was asked already but I just want to make sure that it's safe to flash a 5.1 based ROM over a currently active Marshmallow ROM using TWRP using only the usual wipes? I remember that I had to flash a custom boot image with a PC or something like that in order for the custom recovery to work on my K3 Note, which I received with Marshmallow installed, so I'm not sure if I can hop back to 5.1 if phone never even had it installed. Any advice?
Click to expand...
Click to collapse
Yes, IT IS SAFE but there are some points to note:
Every Rom Zip contains a boot.img file which is also flashed when the zip is flashed.
You do not need to replace boot.img in order to install TWRP, but you need it to flash SuperSU.zip to your device or install xposed
Remember You need to wipe data partition (No need to wipe Internal) in order to continue.
Thanks for the reply. I don't know why, but I remember when I was installing TWRP I couldn't boot into it until I flashed a new boot image or something like that. All I could boot into was the stock recovery or something like that. I needed to use SP flash tools and flash something in order to get it to work. So it's safe for me to try 5.1 ROMs? They seem to be more stable than custom Marshmallow ROMs....
livgrave said:
Thanks for the reply. I don't know why, but I remember when I was installing TWRP I couldn't boot into it until I flashed a new boot image or something like that. All I could boot into was the stock recovery or something like that. I needed to use SP flash tools and flash something in order to get it to work. So it's safe for me to try 5.1 ROMs? They seem to be more stable than custom Marshmallow ROMs....
Click to expand...
Click to collapse
You must have flashed the recovery.img ( and also the boot.img) because my root methods mention them.

[SOLVED] c5502 5.1.1 Stuck on black blank screen, Unlocked bootloader, No recovery!

Hello Xperia ZR users,
I had dual recovery i flashed RR M and RR N rom's in a single day. the next day i restored stock rom which i have backup approximately 5.30 gb it took so much time to boot whole 60 percent charging had been gone so i flashed stryflex mm rom for sony look but again i thought to use stock rom so this time i restored stock backup rom through otg pendrive because my external storage got write permissions problem when i installed stryflex! but now also same happened device taking so much time to boot and i thought to flash rr nougat but i wiped everything through dualrecovery and i removed battery as dualrecovery not showing anything in otg pendrive now there is also no recovery available to flash anything!
Xda user Robin guided me to flash stock rom through firmtool but ended with errors in xperia firmtool log file!
So now i am having black blank screen! no recovery unlocked bootloader! i had installed adb drivers through flashtool drivers and also installed other universal adb drivers but pc is not showing my device in adb devices list in command prompt! My device is showing in Device manager as ADB interface! when i connected my phone through fastboot mode !
Please help me!
SOLUTION : If u are using custom roms and want to go back to stock rom 5.1.1 ?! and while flashing are u experiencing blank screen after a successful flash through flashtool or experiencing any errors in flashtool while flashing?! Well there are two methods to flash stock roms! Successfully!!
Method 1 : whatever the custom rom you are in! Just flash the stock 5.1.1 rom in your phone through flashtool but with other pc! Yes other pc, pc with no drivers installed regarding adb! Try out your friends laptop or pc! Don't forget to install flashtool, fastboot and your xperia model drivers through flashtool drivers exe file! which is located in c drive!! Also install adb setup file that install all drivers all over pc! And just flash the stock 5.1.1 rom through flashtool! There are 99.99999% chance that stock rom will be successfully flashed in your phone! If this doesn't work!! It's your bad luck and its definitely pc problem not your phone! Then just follow method 2 to flash the rom!
Method 2 : flash the twrp img through flashtool (use any flashtool version!) by entering into fastboot mode and select flash the kernel option and select the twrp img file in your pc (i mean u have to download the twrp 3.0.3 img and use it ! ) twrp will be successfully installed in ur phone and then flash the stock jellybean 4.1.2 version the download link is available below! it is an ftf file convert the ftf file into zip file and then flash through recovery! that's it u will be booted to stock jb firmware and it will ask to factory reset on first boot press yes option it will take few minutes and then it will be booted to jb rom!! restore drm keys if u have the backup and update the os through xperia companion!! or else flash the 5.1.1 zip through recovery!
Note: only flash the jb rom i tested flashing kitkat it doesn't worked!
Stock jellybean firmware Link:
https://forum.xda-developers.com/showthread.php?t=2384512
PRFCreator tool:
https://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
I uploaded a flashtool log file ! Please help!!
Delta solution
I was also stuck with same error, I Banged my head in all forums with all rookie answers.
Why this problem occurs?
Ans: Because the user has installed Marshmallow or Nougat ROM on Lollipop. Even if you try to
come back on Lollipop stock, it won't accept the TA partition and won't go further (Although CM 10/11/12/13/14 or ASOP 10/11/12/13/14 RR-M/N WORKS without ERROR, but I assume user is hungry for STOCK 5.1.1 LOLLIPOP).
So, what's the solution, either you need backup of your TA partition OR - and if you haven't like me. Nothing to worry. You just need Stock JellyBean ROM (THIS IS IMPORTANT).
My solution will 100 percent work (Its Brahmastra ).
Step 1) download https://forum.xda-developers.com/showthread.php?t=2384512
Step 2) download flash tool version which is mentioned in the above link , I used 0.9.11. Version 0.9.19.8 is HELL - You will never succeed with this version)
Step3) flash... Even if you encounter error [17] no worries, if no error, still no worries (If you get error after TA partation is done...you are through, if you encounter before TA partition, it is worrisome)
Step 4) fastboot -i 0x0fce oem unlock 0xxxxxxxxxxxxxxx69
Step 5) fastboot flash boot boot. Img (twrp or PhilZ recovery) or STEP 8)
Step 5) download customized 5.1.1 by chippa
Step 6) goto TWRP (Recovery) and install customized , NO CMW recovery
Step 7) beer for me, go to STEP 10
Step 8) use flash tool to install C5502_10.7.A.0.222_1273-5765_R1E
Step 9) It boots after 3 sec
step 10) go to step 7 (beer loop mode)
If you go to SONY service centre, those M*F* will say, your screen is damaged, because once you push power button, it vibrates and goes to blank screen.
OR
You have locked your bootloader and you simply need to unlock the bootloader in ( STEP 4 ) and you will start with normal BOOT procedure.
How to unlock the bootloader?
Ans: http://www.cyanogenmods.org/forums/topic/unlock-bootloader-android-phone-using-fastboot/
OR
Relock bootloader (boot), then unlock bootloader (boot the device)
Cheers,
Dr. Lamda
Ok man thanks for your help! I am really surprised that someone gave me the solution! Well, i think i repaired my device! I don't know exactly what i did was correct or wrong few days before i installed a universal adb driver that repaired the driver in pc although there was an existing adb driver! And then i installed an old adb setup because i found that new adb not works sometime! And then through flashtool ver 0.9.23. something , i flashed the twrp 3.0.3 img by fastboot mode it installed successfully! And then i just flashed a rr nougat rom through recovery. I seen so many errors while wiping and flashing rom and gapps! But phone rebooted successfully! After that i see that selinux is set to enforcing rr nougat rom and i can't go to recovery mode so i same flashed twrp img through flashtool but it only rebooting to twrp i pulled off battery and booted again it was successfully booted to ROM!
Hey! Can i flash customised 5.1.1 through recovery ?! as now i am in nougat !
sandeepxperia said:
Ok man thanks for your help! I am really surprised that someone gave me the solution! Well, i think i repaired my device! I don't know exactly what i did was correct or wrong few days before i installed a universal adb driver that repaired the driver in pc although there was an existing adb driver! And then i installed an old adb setup because i found that new adb not works sometime! And then through flashtool ver 0.9.23. something , i flashed the twrp 3.0.3 img by fastboot mode it installed successfully! And then i just flashed a rr nougat rom through recovery. I seen so many errors while wiping and flashing rom and gapps! But phone rebooted successfully! After that i see that selinux is set to enforcing rr nougat rom and i can't go to recovery mode so i same flashed twrp img through flashtool but it only rebooting to twrp i pulled off battery and booted again it was successfully booted to ROM!
Hey! Can i flash customised 5.1.1 through recovery ?! as now i am in nougat !
Click to expand...
Click to collapse
Yes! you can go back to 5.1.1 by the above procudure
If you want to revert back from RR - N to stock firmware then use flashtool-0.9.18.4 and first flash stock 4.4.4 firmware/ boot then flash stock 5.1.1 firmware.
Lλmdα said:
Yes! you can go back to 5.1.1 by the above procudure
Click to expand...
Click to collapse
so i can flash the customised 5.1.1 rom by chippa through twrp recovery, right?
moly.maji , i love u brooooooo with your help what i did was i downloaded a jelly bean 4.1.2 rom and flashed through twrp 3.0.3 recovery by converting the ftf file to zip file (thanks to my other bro xda member robin for telling the info about prf creator pc software tool that converts ftf to zip) and it was successfully booted to jellybean stock rom !
and i am saying to whoever facing to flash the stock rom after updating the device to custom roms to prevent any errors to return to stock 5.1.1 firmware while flashing through flashtool it may be driver related errors in pc or any error just use the flashtool for flashing the twrp img! only by going to fastboot mode and then select flash the kernel option through that select the twrp img that's it within seconds the twrp will be installed in your phone and through twrp recovery flash the jellybean 4.1.2 rom ! i tested flashing kitkat but failed! so flash only jellybean rom!! that's it your phone will boot to jb rom and then if u have backup of drm keys restore and update the os through xperia companion or flash the 5.1.1 rom through recovery that's it !!
my device cant be detected and refused to go into fastboot or Recovery mode
is there any way?

Categories

Resources