Related
Hi,
I have an Atrix HD with an unlocked bootloader and root access running on Bell Canada. Before getting my AHD, I was using an HTC HD7 running Deepshining Rom 7.8.
When driving around in my car with the phone connected to my handfree BT speakerphone, I would sometimes get a message that I have no cell service on my AHD. I tend to drive the same routes and this never happened with my HTC. I have this issue with all custom 4.2.2 roms I have tried. The baseband version is MB886_BP_100740.071.6561P.
Anyone else experience this issue?
Any information would be appreciated.
Thanks
audit13 said:
Hi,
I have an Atrix HD with an unlocked bootloader and root access running on Bell Canada. Before getting my AHD, I was using an HTC HD7 running Deepshining Rom 7.8.
When driving around in my car with the phone connected to my handfree BT speakerphone, I would sometimes get a message that I have no cell service on my AHD. I tend to drive the same routes and this never happened with my HTC. I have this issue with all custom 4.2.2 roms I have tried. The baseband version is MB886_BP_100740.071.6561P.
Anyone else experience this issue?
Any information would be appreciated.
Thanks
Click to expand...
Click to collapse
this is because of signal changing from 3g to lte or vice versa,, if you dont want that you can change prefrance to only lte or only hspa+ on *#*#4636#*#*
audit13 said:
Hi,
I have an Atrix HD with an unlocked bootloader and root access running on Bell Canada. Before getting my AHD, I was using an HTC HD7 running Deepshining Rom 7.8.
When driving around in my car with the phone connected to my handfree BT speakerphone, I would sometimes get a message that I have no cell service on my AHD. I tend to drive the same routes and this never happened with my HTC. I have this issue with all custom 4.2.2 roms I have tried. The baseband version is MB886_BP_100740.071.6561P.
Anyone else experience this issue?
Any information would be appreciated.
Thanks
Click to expand...
Click to collapse
Try the Mex Retail baseband -- is version QINARA_BP_100740.081.65.05p. I have great service with it (better than Stock AT&T JB actually).
//Due to my paranoia, I take different routes all the time. I just don't like the police seeing me take the same route over and over again....
Aingaran said:
this is because of signal changing from 3g to lte or vice versa,, if you dont want that you can change prefrance to only lte or only hspa+ on *#*#4636#*#*
Click to expand...
Click to collapse
Hi,
Would this be the same as changing option under mobile network or should I use your option to make it stick?
Thanks for your help.
skeevydude said:
Try the Mex Retail baseband -- is version QINARA_BP_100740.081.65.05p. I have great service with it (better than Stock AT&T JB actually).
Click to expand...
Click to collapse
Hi,
Is that the rom under your stock AHD rom thread? If it is, can I just flash it using cwm like I did with the untested Bell rom?
Edit: I should mention that I disable my data connection unless I'm checking my email or surfing the WWW.
audit13 said:
Hi,
Would this be the same as changing option under mobile network or should I use your option to make it stick?
Thanks for your help.
Hi,
Is that the rom under your stock AHD rom thread? If it is, can I just flash it using cwm like I did with the untested Bell rom?
Click to expand...
Click to collapse
ya, nearly same.... but once rebooted, it goes back to default, should change at every reboot.. and stock MR is available in that same thread and it is not CWM flashable.. you need to flash it through fastboot..
Aingaran said:
ya, nearly same.... but once rebooted, it goes back to default, should change at every reboot.. and stock MR is available in that same thread and it is not CWM flashable.. you need to flash it through fastboot..
Click to expand...
Click to collapse
Thanks. I'll try changing the preferred network using the hidden menu.
audit13 said:
Hi,
Would this be the same as changing option under mobile network or should I use your option to make it stick?
Thanks for your help.
Hi,
Is that the rom under your stock AHD rom thread? If it is, can I just flash it using cwm like I did with the untested Bell rom?
Edit: I should mention that I disable my data connection unless I'm checking my email or surfing the WWW.
Click to expand...
Click to collapse
Yes, but that rom only contains the MR system and is/was made for the stock AT&T kernel.
Download the fastboot and manually flash just the radio. No wipe required that way.
skeevydude said:
Yes, but that rom only contains the MR system and is/was made for the stock AT&T kernel.
Download the fastboot and manually flash just the radio. No wipe required that way.
Click to expand...
Click to collapse
Just downloaded the Mexico rom from Goo. Took quite a while. I'll have to do some research to figure out how to flash the radio. Thanks for your help.
audit13 said:
Just downloaded the Mexico rom from Goo. Took quite a while. I'll have to do some research to figure out how to flash the radio. Thanks for your help.
Click to expand...
Click to collapse
Extract the fastboot
Download the snapdragon fastboots (linked in fastboot guide)
Place the appropriate one in the folder with the fastboot's files
fastboot flash modem NON-HLOS.bin
skeevydude said:
Extract the fastboot
Download the snapdragon fastboots (linked in fastboot guide)
Place the appropriate one in the folder with the fastboot's files
fastboot flash modem NON-HLOS.bin
Click to expand...
Click to collapse
Okay, I have the NON-HLOS.bin file from the Mexico retail. I assume I have to do the following on my Windows machine:
1) install the adb/fastboot files to a single directory on my computer;
2) place the NON-HLOS.bin file in the adb/fastboot directory from step 1;
3) open a command prompt window as an administrator;
4) install the Motorola USB drivers and connect my booted phone with USB debugging enabled;
5) from the command line, type "adb reboot bootloader" and press the enter key to get my phone into AP Fastboot Flash mode;
6) from the command line, type "fastboot flash modem NON-HLOS.bin" and press enter; and
7) reboot the phone and check to made sure my baseband now says "QUINARA_BP_100740.081.65.05P".
If I want to flash back to the stock Bell baseband, I assume I would substitute the Mexico NON-HLOS.bin file for the Bell file.
Pardon my noobness. It's just that I don't want to screw up my phone. It's barely 3 months old.
audit13 said:
Okay, I have the NON-HLOS.bin file from the Mexico retail. I assume I have to do the following on my Windows machine:
1) install the adb/fastboot files to a single directory on my computer;
2) place the NON-HLOS.bin file in the adb/fastboot directory from step 1;
3) open a command prompt window as an administrator;
4) install the Motorola USB drivers and connect my booted phone with USB debugging enabled;
5) from the command line, type "adb reboot bootloader" and press the enter key to get my phone into AP Fastboot Flash mode;
6) from the command line, type "fastboot flash modem NON-HLOS.bin" and press enter; and
7) reboot the phone and check to made sure my baseband now says "QUINARA_BP_100740.081.65.05P".
If I want to flash back to the stock Bell baseband, I assume I would substitute the Mexico NON-HLOS.bin file for the Bell file.
Pardon my noobness. It's just that I don't want to screw up my phone. It's barely 3 months old.
Click to expand...
Click to collapse
Yes to all, but with step 6, make damn sure you're using the fastboot from the guide. Using the SDK fastboot is the cause of 99% of the fastboot questions we answer.
LoL @ 3 Months. Flashed my first android rom (2.5 years ago) within 4 hours of having my Bravo -- and I had never even used an Android Phone before that. Found XDA during the initial charge, read up on my phone, learned a bit, and flashed away. Luckily I'm a quick studier and learner. Didn't even join XDA till 6 months later. Saw some questions I could answer, joined, and answered them....now I compile roms and am learning Java. XDA is a great place if you use it properly.
skeevydude said:
Yes to all, but with step 6, make damn sure you're using the fastboot from the guide. Using the SDK fastboot is the cause of 99% of the fastboot questions we answer.
LoL @ 3 Months. Flashed my first android rom (2.5 years ago) within 4 hours of having my Bravo -- and I had never even used an Android Phone before that. Found XDA during the initial charge, read up on my phone, learned a bit, and flashed away. Luckily I'm a quick studier and learner. Didn't even join XDA till 6 months later. Saw some questions I could answer, joined, and answered them....now I compile roms and am learning Java. XDA is a great place if you use it properly.
Click to expand...
Click to collapse
Thanks for the confirmation. I just finished flashing the radio and it's all good so far. I used the fastboot files from the Myth Tools and they worked without any issues. Maybe I got lucky:fingers-crossed:
I've rooted some Samsung and HTC phones using the great guides on this forum and a helping hand from users like yourself.
Could I compile roms? I doubt it. I don't think I'm anywhere close to being that competent.
audit13 said:
Thanks for the confirmation. I just finished flashing the radio and it's all good so far. I used the fastboot files from the Myth Tools and they worked without any issues. Maybe I got lucky:fingers-crossed:
I've rooted some Samsung and HTC phones using the great guides on this forum and a helping hand from users like yourself.
Could I compile roms? I doubt it. I don't think I'm anywhere close to being that competent.
Click to expand...
Click to collapse
The files with Myth are the proper ones. I think most Myth Tools issues are from when/if whomever followed an SDK Install Guide that had whomever add the SDK fastboot to the system's $PATH. If you've never installed the SDK or only use Myth, you'll be fine.
Thanks. Remember back when rooting was as simple as installing an APK from the market? Good times back then.
You probably could compile them, its fixing it when the compile breaks that's the actual hard part (or waiting on upstream to fix it that's the really hard part ....waiting sucks )
downloaded the mexico retail from goo.im and extracted the .zip, but where is the NON-HLOS.bin file?
?
davwman said:
downloaded the mexico retail from goo.im and extracted the .zip, but where is the NON-HLOS.bin file?
?
Click to expand...
Click to collapse
Try here: http://sbf.droid-developers.org/dinara/list.php
I'm currently rooted and am running only Xposed Mods with a few root apps. How can I unroot my phone and get the stock recovery back onto my Moto X so that I can take OTA's again without wiping all of my data? What files do I need to download/flash and how do I do it? I've searched around, but it just got me even more confused.
bd1212 said:
I'm currently rooted and am running only Xposed Mods with a few root apps. How can I unroot my phone and get the stock recovery back onto my Moto X so that I can take OTA's again without wiping all of my data? What files do I need to download/flash and how do I do it? I've searched around, but it just got me even more confused.
Click to expand...
Click to collapse
Someone correct me if I'm wrong, but I believe that flashing the stock system will remove all the changes you've made with root/xposed modules, and flashing the stock recovery should essentially get rid of root (I think).
I don't know precisely where to get all the files, but if you find them around, you can push them using ADB.
If you're like me and are okay with losing everything on the phone, go ahead and use RSDLite (it requires ADB). It's easy-ish to use, and there's even a video tutorial that covers everything after installation of all the files.
You need to use fastboot to push system.img and recovery.img from the version of the OS you're currently running. See here for a list of OS images:
http://sbf.droid-developers.org/ghost_rcica/list.php
See this thread for a link to a fastboot.exe that'll work:
http://forum.xda-developers.com/showthread.php?t=2527287
See this thread for a quick overview and link to more detailed info:
http://forum.xda-developers.com/showthread.php?t=2525495&page=4
jonnythan said:
You need to use fastboot to push system.img and recovery.img from the version of the OS you're currently running. See here for a list of OS images:
http://sbf.droid-developers.org/ghost_rcica/list.php
See this thread for a link to a fastboot.exe that'll work:
http://forum.xda-developers.com/showthread.php?t=2527287
See this thread for a quick overview and link to more detailed info:
http://forum.xda-developers.com/showthread.php?t=2525495&page=4
Click to expand...
Click to collapse
Thanks for the info and links. I'm currently downloading the OS that I'm currently running (VZW OTA update in my case), but I have one question: How do I use fastboot? When I double click that .exe nothing happens.
bd1212 said:
Thanks for the info and links. I'm currently downloading the OS that I'm currently running (VZW OTA update in my case), but I have one question: How do I use fastboot? When I double click that .exe nothing happens.
Click to expand...
Click to collapse
You need to install the Android SDK and the platform tools, then boot your phone into fastboot mode. You need to run a command line to flash the IMGs. It's explained in the links.
meant2live218 said:
Someone correct me if I'm wrong, but I believe that flashing the stock system will remove all the changes you've made with root/xposed modules, and flashing the stock recovery should essentially get rid of root (I think).
I don't know precisely where to get all the files, but if you find them around, you can push them using ADB.
If you're like me and are okay with losing everything on the phone, go ahead and use RSDLite (it requires ADB). It's easy-ish to use, and there's even a video tutorial that covers everything after installation of all the files.
Click to expand...
Click to collapse
I was under the impression that we cannot do a factory reset or we won't get the soak test OTA pushed to our phones. That's what the soak test post said atleast. Something along the lines of "DO NOT FACTORY RESET or you will not receive the OTA"... don't want to quote it directly since I'm under an NDA, but it was something like that. Did I misunderstand? If I use the Moto X toolkit or RSDLite to revert back to stock is that different than a factory reset?
jonnythan said:
You need to install the Android SDK and the platform tools, then boot your phone into fastboot mode. You need to run a command line to flash the IMGs. It's explained in the links.
Click to expand...
Click to collapse
I've got the Android SDK install and ADB is setup. I'm pretty familiar with ADB. I moved the motorola fastboot.exe into platform-tools and I know how to put the phone into fastboot mode. What I don't understand is what I need to do once I've got the system.img file and the recovery.img file. I'm still reading all of the links so I might not have gotten to the part where it explains what to do, so forgive me for that.
bd1212 said:
I've got the Android SDK install and ADB is setup. I'm pretty familiar with ADB. I moved the motorola fastboot.exe into platform-tools and I know how to put the phone into fastboot mode. What I don't understand is what I need to do once I've got the system.img file and the recovery.img file.
Click to expand...
Click to collapse
Right from my third link:
Next, you need to put the phone into "fastboot mode" as described above, also make sure usb debugging is enabled in the developer menu settings. Then download the FW for your phone found (follow what i said in regards to the other persons post below), then unzip that, put the system and recovery image in the same directory that your fastboot and adb is in, then run these commands from the cmd prompt
fastboot flash system system.img
fastboot flash recovery recovery.img
then your done, you can type
fastboot reboot
Click to expand...
Click to collapse
jonnythan said:
Right from my third link:
Click to expand...
Click to collapse
Yep, just got to that part lol. Having some trouble downloading the VZW file. My current download just stopped with a network error and the website that is hosting the files keeps saying service unavailable and to contact the website administrator. Weird. I'm blaming it on my college's ****ty wireless network.
Edit: Yup, for some reason the wifi at the school decided it need me to input my credentials to re-login for the 6th time today to verify who I am and allow me internet access.
Edit 2: The things I'd do to have a stable connection... Once again, the download failed halfway through because the damn connection at this college sucks. This is infuriating.
jonnythan said:
Right from my third link:
Click to expand...
Click to collapse
Is there anyway you (or someone else) could upload the VZW OTA update file to Google Drive or Dropbox for me? This download is going way to slow to the point where I can't even finish it before my connection craps out. Or can you (or someone else) just upload the system.img and recovery.img files for me?
bd1212 said:
Is there anyway you (or someone else) could upload the VZW OTA update file to Google Drive or Dropbox for me? This download is going way to slow to the point where I can't even finish it before my connection craps out. Or can you (or someone else) just upload the system.img and recovery.img files for me?
Click to expand...
Click to collapse
Uploading now, but it'll take a bit. Big file.
jonnythan said:
Uploading now, but it'll take a bit. Big file.
Click to expand...
Click to collapse
Thanks man. You don't even know how much I appreciate this.
Which one of the two is the camera update for vzw?
Where do you get stock recovery?
EDIT: Sorry, Nevermind. I probably extract it from the zip.
Sent from my XT1060 using xda app-developers app
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
The emergency utility was able to get me out of my soft brick. Thank you sir!
xt925
Does it works on xt925 ?
Thanks.
morcego.surf said:
Does it works on xt925 ?
Thanks.
Click to expand...
Click to collapse
It does, the emergency will flash an XT926 firmware, might have to change internal files I guess. It did got me out of a flash failure then could get back into fastboot and then flash my Telcel firmware for my XT925.
Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?
andreluigo said:
Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?
Click to expand...
Click to collapse
i have seen some lazy people, but i must say you take the cake.
this thread was 4 hole post long before you posted. 2 of which, asked and answered your exact first question.
no self respecting person is going to help you, when you cant even read a 4 post long thread before asking a question in it.
open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Just wanted to thank you for creating this tool, man. The Emergency Fix really saved my skin from a soft brick.
Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?
Nice to know it.
open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Hello,
Could you please write in big red letters in the beginning of your post : "ONLY FOR XT926, Do not use it for XT925" ?
Thank you
yoderz said:
Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?
Click to expand...
Click to collapse
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US
150kwh said:
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US
Click to expand...
Click to collapse
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
Thanks, worked for me now. Super happy to luck out on timing so I could get unlocked & root, wish I had seen this earlier.
..Now, if only their forum would validate me. (Maybe a week timeout??)
yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
so you have XT925 and this link helped you fix the install, and you're now on the official KK? does LTE and GSM work for you?
Hello everyone,
I have a XT1079 and I made the mistake of flashing 1069´s ROM. Now I can´t install a custom rom and adb does not recognize my device (it is listed as 1069 with a question mark on the icon in device manager).
Any ideas for help me will be appreciated, thanks a lot.
If your phone is able to go into recovery , you just flash the stock firmware again or flash flashable zip of the stock ROM ( or may be some custom ROM (i'm not sure though)). This will kind of reset your phone and it will work again. But as you said, You have downgraded your phone, you need to check out which one to flash ...i mean whether to flash kitkat or lollipop version.
Custom ROM
andromuks said:
If your phone is able to go into recovery , you just flash the stock firmware again or flash flashable zip of the stock ROM ( or may be some custom ROM (i'm not sure though)). This will kind of reset your phone and it will work again. But as you said, You have downgraded your phone, you need to check out which one to flash ...i mean whether to flash kitkat or lollipop version.
Click to expand...
Click to collapse
Problem is that the stock rom does not come in a zip file and I receive downgrade error msg when I try to flash via mfastboot. But I want to use Cyanogenmod ROM. Thanks again.
GeekMaga said:
Hello everyone,
I have a XT1079 and I made the mistake of flashing 1069´s ROM. Now I can´t install a custom rom and adb does not recognize my device (it is listed as 1069 with a question mark on the icon in device manager).
Any ideas for help me will be appreciated, thanks a lot.
Click to expand...
Click to collapse
install motorola device manager 2.5.4 .exe for fastboot drivers for all motorola's and see if ADB recognises it then?
GeekMaga said:
Hello everyone,
I have a XT1079 and I made the mistake of flashing 1069´s ROM. Now I can´t install a custom rom and adb does not recognize my device (it is listed as 1069 with a question mark on the icon in device manager).
Any ideas for help me will be appreciated, thanks a lot.
Click to expand...
Click to collapse
If you flashed XT1069 motoboot.img then you're simply screwed as you won't be able to connect to mobile network.
One more try
LuK1337 said:
If you flashed XT1069 motoboot.img then you're simply screwed as you won't be able to connect to mobile network.
Click to expand...
Click to collapse
I sent to a technician to restore stock firmware and I will follow the tutorial here in the forum for the right model. Closing thread.
Solved for now
reefuge said:
install motorola device manager 2.5.4 .exe for fastboot drivers for all motorola's and see if ADB recognises it then?
Click to expand...
Click to collapse
Too late but thanks anyway I sent it to a local cell phone repair shop. After that I will follow the tutorial here to install rom and google apps thank you very much.
Man it´s never too late for android
I solved the first part. I was using titan files and for XT1078 the correct one is thea. Problem now is that none of the sim cards are recognized by the firmware. Any ideas guys
I used twrp (mfastboot flash recovery <file_name>. and it´s interface it is pretty friendly. Also installed google apps zips. It is amazing how much you can customize with this ROM.
GeekMaga said:
I solved the first part. I was using titan files and for XT1078 the correct one is thea. Problem now is that none of the sim cards are recognized by the firmware. Any ideas guys
Click to expand...
Click to collapse
you have a xt1079 right? stop flashing WRONG files until you get correct xt1079 firmware - please tell us what you originally had on phone and we will try to find it for you.
I cant seem to find any brazil xt1079 firmwares - yet - you have no signal due to incorrect radio/modem files - only can find xt1079 retcn files this modem / radio combo will be wrong - yours will become available but may take months to appear.....
THIS is why we backup our stock roms with TRWP to include the PDS area
I was trying to install Lineage 16.0 OS and Magisk Root my android but in the process I got some trouble when tried to install TWRP on IT (TWRP works fine when I flashboot it from pc but not when I try to install it, causes slot issues). After that I performed a total wipe to "clear" the phone system (I never know when is needed to wipe but I wanted to have the cleanest setup) and installed just the Lineage, then It worked fine besides it got no way to connect to the internet. The wi-fi just doesn't turn on and the SIM Cards aren't detected.
After that I found out that my phone wasn't registered with any IMEI and I tried two other Stock ROMs trying to get my internet back but neither seemed to work. All I wanna know is how do I got my Moto X4 with Lineage 16.0 OS working fine? I think register the IMEI's I got here would solve the problem, but I don't find anywhere how do I repair the IMEI on a X4 Cortex-A53 (Qualcomm). The other solutions I found here on the forum consist of trying to flash some Stock ROMs until it works xD.
I wonder if there's a way to replace back my IMEI and still keep the Lineage OS
Obs 1: Before I flashed my phone, It had a up to date 9.0 android here in Brazil and I was using a SIM Card from TIM.
Obs 2: The Stock ROM's I tried to flash it back were "XT1900-6_PAYTON_RETBR_9.0_PPWS29.69-26-6_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml" and the other one that I've alredy deleted I think it was a RETAIL one.
Please help, guys
Does you created full backup via TWRP before install LineageOS? If "yes" please restore EFS partition, and all will be fine, I hope.
Lennon_ said:
I was trying to install Lineage 16.0 OS and Magisk Root my android but in the process I got some trouble when tried to install TWRP on IT (TWRP works fine when I flashboot it from pc but not when I try to install it, causes slot issues). After that I performed a total wipe to "clear" the phone system (I never know when is needed to wipe but I wanted to have the cleanest setup) and installed just the Lineage, then It worked fine besides it got no way to connect to the internet. The wi-fi just doesn't turn on and the SIM Cards aren't detected.
After that I found out that my phone wasn't registered with any IMEI and I tried two other Stock ROMs trying to get my internet back but neither seemed to work. All I wanna know is how do I got my Moto X4 with Lineage 16.0 OS working fine? I think register the IMEI's I got here would solve the problem, but I don't find anywhere how do I repair the IMEI on a X4 Cortex-A53 (Qualcomm). The other solutions I found here on the forum consist of trying to flash some Stock ROMs until it works xD.
I wonder if there's a way to replace back my IMEI and still keep the Lineage OS
Obs 1: Before I flashed my phone, It had a up to date 9.0 android here in Brazil and I was using a SIM Card from TIM.
Obs 2: The Stock ROM's I tried to flash it back were "XT1900-6_PAYTON_RETBR_9.0_PPWS29.69-26-6_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml" and the other one that I've alredy deleted I think it was a RETAIL one.
Please help, guys
Click to expand...
Click to collapse
I had this problem days ago and the TWRP EFS restore did not fix it. I just had a "0" as an IMEI.
Someone over in the dev section told me to flash 8.1 in fastboot, boot and then flash the latest 9.0 it worked perfect and all my info is back.
@johnjingle Which version of 8.1 did you use? I'm having the same issue even with the 8.1 I flashed.
crazyramen said:
@johnjingle Which version of 8.1 did you use? I'm having the same issue even with the 8.1 I flashed.
Click to expand...
Click to collapse
The first release of 8.1. Nothing worked at all until I flashed the latest 9.0 update.
johnjingle said:
The first release of 8.1. Nothing worked at all until I flashed the latest 9.0 update.
Click to expand...
Click to collapse
I do not have the rules and i don't need to get kicked posting a link, I went to lolinet and used the 46-13 update which made the imei, esn, etc null. then flashing 9.0 fixed the radio/modem etc.
johnjingle said:
I do not have the rules and i don't need to get kicked posting a link, I went to lolinet and used the 46-13 update which made the imei, esn, etc null. then flashing 9.0 fixed the radio/modem etc.
Click to expand...
Click to collapse
Try reflash NON-HLOS.bin and fsg.mbn from ADB, i have the same problem with diferent rom in my X4, find your model (1-2-4-6-7) here and flash those files
HTML:
https://mirrors.lolinet.com/firmware/moto/payton/official/
Datclefxuj said:
Try reflash NON-HLOS.bin and fsg.mbn from ADB, i have the same problem with diferent rom in my X4, find your model (1-2-4-6-7) here and flash those files
HTML:
https://mirrors.lolinet.com/firmware/moto/payton/official/
Click to expand...
Click to collapse
How do I flash just those files? What partitions will they go to?
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
johnjingle said:
I do not have the rules and i don't need to get kicked posting a link, I went to lolinet and used the 46-13 update which made the imei, esn, etc null. then flashing 9.0 fixed the radio/modem etc.
Click to expand...
Click to collapse
Thanks for the help, but I've tried all that and am not getting anything. I have a new moto x4 also, the same model. I tried backing up everything in TWRP and copying it over, but am not getting any luck.
crazyramen said:
How do I flash just those files? What partitions will they go to?
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
Thanks for the help, but I've tried all that and am not getting anything. I have a new moto x4 also, the same model. I tried backing up everything in TWRP and copying it over, but am not getting any luck.
Click to expand...
Click to collapse
Dowload the full stock rom of your model, unzip the rom and find those files, in cmd promt, use abd
Flash modem NON-HLOS. bin
Flash fsg fsg.mbn
Datclefxuj said:
Dowload the full stock rom of your model, unzip the rom and find those files, in cmd promt, use abd
Flash modem NON-HLOS. bin
Flash fsg fsg.mbn
Click to expand...
Click to collapse
I tried that... still a 0 for IMEI...
I have an XT1900-1, that's retus, right?
crazyramen said:
I tried that... still a 0 for IMEI...
I have an XT1900-1, that's retus, right?
Click to expand...
Click to collapse
Maybe nougat or oreo versión, try with a direfent stock rom (amz, ret, fi), I dont know more options, i try 5-6 stock roms to find one works in my tx1900-4
Dang. Ok I guess I'll just go through all the versions on lolinet. Thanks for all the advice
Hi Guys, thanks for your cooperation on this post, I'm able to recover my phone thanks to you. What I did was flash the fsg and NON-HLOS files from the retail 7.1.1, then upgraded to retail 8.0 and then go to the last retbr 9.0 firmware, cuz, I'm from Brazil, so thank you Guys, you're all awesome.
omegajoey said:
Hi Guys, thanks for your cooperation on this post, I'm able to recover my phone thanks to you. What I did was flash the fsg and NON-HLOS files from the retail 7.1.1, then upgraded to retail 8.0 and then go to the last retbr 9.0 firmware, cuz, I'm from Brazil, so thank you Guys, you're all awesome.
Click to expand...
Click to collapse
Hi man, I'm in a almost identical situation as yours, so I tried to do the same as you said in this post. I have a XT1900-6, using TIM carrier.
I flashed retail 7.1.1 but still got no signal or wifi, I have mac address tho, but anyway, how can I reflash fsg and NON-HLOS? in fastboot?
Thanks in advance
-------------
EDIT:
I've managed to regain mobile data by flashing the the NON-HLOS.bin and erase modemst1 and 2 with XT1900-1_PAYTON_FI_9.0_PPWS29.69-39-2-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip (actually running android 7.1.1) but still I have no wifi
EDIT 2:
After that I decided to flash the whole rom XT1900-1_PAYTON_FI_9.0_PPWS29.69-39-2-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and now my Moto X4 is fully functional with mobile and wifi connections.
mariotullece said:
Hi man, I'm in a almost identical situation as yours, so I tried to do the same as you said in this post. I have a XT1900-6, using TIM carrier.
I flashed retail 7.1.1 but still got no signal or wifi, I have mac address tho, but anyway, how can I reflash fsg and NON-HLOS? in fastboot?
Thanks in advance
-------------
EDIT:
I've managed to regain mobile data by flashing the the NON-HLOS.bin and erase modemst1 and 2 with XT1900-1_PAYTON_FI_9.0_PPWS29.69-39-2-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip (actually running android 7.1.1) but still I have no wifi
EDIT 2:
After that I decided to flash the whole rom XT1900-1_PAYTON_FI_9.0_PPWS29.69-39-2-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and now my Moto X4 is fully functional with mobile and wifi connections.
Click to expand...
Click to collapse
Great!, the principal problem is find the "drivers" of the model, when you find it, you can flash any version compatible (FI, RT, AMZ) and flash only NON-HLOS and fsg (i don´t need erase the modem but isn´t bad idea). My X4 is XT900-4 version, and flash any XT900-6 version and works, be careful if you flash an incompatible version or you have a hardbrick. If you dont want reflash NON-HLOS and fsg, overwrite the files in the same folder on the rom and flash whole version, when reboot de system the sim and wifi are works. The only problem I have is cannot update via OTA, because it isn´t the same version of the chip and firmware
hi guys, i have moto x4 xt1900-2 flashed ppws29.69.26-4 and lost wifi and network signal and shows IMEI is 0. my x4 bootloader was locked during flashing the said stock rom as it contains the cmd as fastboot oem lock but i didnt notice that while flashing that rom. now my moto x4 is not detecting any wifi and signal..not able to flash any rom through flashing as it showing that flashing permission denied..please help me....
thanks in advance
rayudu123 said:
hi guys, i have moto x4 xt1900-2 flashed ppws29.69.26-4 and lost wifi and network signal and shows IMEI is 0. my x4 bootloader was locked during flashing the said stock rom as it contains the cmd as fastboot oem lock but i didnt notice that while flashing that rom. now my moto x4 is not detecting any wifi and signal..not able to flash any rom through flashing as it showing that flashing permission denied..please help me....
thanks in advance
Click to expand...
Click to collapse
fixed ?
علاء