My moto x xt1058 retail Brazil don't enter fastboot mode. BlankFlash process complete and I didn't get any error message, but it continues "Qualcomm HS-USB QDLoader 9008 (COM10)" on device MGR. I have another moto x and use it to recharge the battery 100%. No luck! Any help? I've tried to download another blankflash and use another computer(WinXP,Win7 x86). No luck again!!! There's another way to flash the blankflash files? I've tried RSDLite too, It recognize my phone with model "QSHUSB_DLOAD" and port type "USB". After start the "MSM8960_blankflash.xml" it goes till 99% and the status change to "sending go command" then an error occurs: "Failed flashing process". Someone can help me?
Related
last night my moto x 2013 xt1053 with unlocked bootloader, cyanogenmod 12.1 and twrp ran out of battery, when i started recharging it, it went directly to ap fastboot with a error message ''load kernel (boot) failed", every option (only barcodes work) gives me that.
the phone wont recharge, it freezes when i take the charger off
i have tried using fastboot to erase cache, it just stays in "waiting device"
when i type "fastboot devices" it gives me nothing
i use ubuntu so i cant use rsd lite, only fastboot.
i REALLY need to use this phone, every help is appreciated.
and sorry for any english errors, its not my native language.
thanks!
Hello, I have a problem with a motorola moto Z3 play of 128gb, as they tell me I was updating and ran out of battery and now starts in red letters that say the following:
Your device didin't start up succesfully
if this a Verizon device, use the Software Repair Asistant on computer to repair your device.
connect your device to your computer, to get the Software Repair Assistant.
if this is not a Verizon device, or Software Repair Assistant did not help for any reason, please contact your customer care center for further asistant.
AP Fastboot Flah Mode (Secure)
SSM: abl csv roll back 0.7
Not bootable A / B slot
Failed to boot Linux, Failling back to fastboot
Fastboot reason: Fail-trough from normal boot mode
when I want to connect it to flash it, the computer does not recognize me fastboot mode, nor adb, I put the commands "fastboot devices" or "ADB devices" and obviously it does not let me do anything, someone to help me out of that state or guide me a little to revive it, please !! ...
Sorry for my bad english.
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Well mine works as follows
Turn off device
Hold vol down and power button, this should take to recovery menu
Select recovery - it will take to a no command screen
Hit power and up once.
That's how I hard reset my g9
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Download the rescue software from the official Lenovo page, it will guide you, maybe you can recover your device, use fastboot to try to put it in mode, good luck
Your phone is bootloader bricked, try blankflashing it. It is already in EDL mode since you got the qualcomm HS Usb
Hi, mrsiri. There isn't any blank flashes available as far as I'm aware.
That's too bad. From my understanding the "Qualcomm HS-USB Loader 9008" showing up means your bootloader is corrupted. That's why you can't get into fastboot and nothing shows up on your screen. By applying a blankflash you could reflash your bootloader, but since there isn't any blankflash available yet you'll have to wait for one.
my Motorola G9 Plus has also been bricked and the only vital sign is that when I connect it to PC it shows that a usb device is connected (lsusb command execution result: Qualcomm, Inc. Gobi Wireless Modem (QDL mode) ) and nothing else appears, i.e. the phone screen is off and in black state and it enters neither recovery nor fastboot mode.
can anyone help to recover the device?!
mohammad_d said:
my Motorola G9 Plus also has been bricked and the only vital sign is that when I connect it to PC it shows that a usb device is connected (lsusb command execution result: Qualcomm, Inc. Gobi Wireless Modem (QDL mode) ) and nothing else appears, i.e. the phone screen is off and in black state and it enters neither recovery nor fastboot mode.
can anyone help to recover the device?!
Click to expand...
Click to collapse
It doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
mrsiri said:
It doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
Click to expand...
Click to collapse
Can I use it's warranty in Motorola warranty dealers and revive the device or provide any bootloader from another same device or any other way?
mohammad_d said:
Can I use it's warranty in Motorola warranty dealers and revive the device or provide any bootloader from another same device or any other way?
Click to expand...
Click to collapse
I don't know of any other method than Blankflashing that could revive your phone in this state. Your warranty was voided right after you unlocked your bootloader, so I don't think they would accept fixing it. The Problem is you can't simply reflash another bootloader, because in this state (QCOM EDL) can only be recognized and flashed with Qfil which uses the primary bootloader to flash to the secondary bootloader. This process needs the blankflash which has the files to correctly flash it. Yes the Android has another bootloader that is less user friendly to boot the other bootloader and then your ROM.
mrsiri said:
I don't know of any other method than Blankflashing that could revive your phone in this state. Your warranty was voided right after you unlocked your bootloader, so I don't think they would accept fixing it. The Problem is you can't simply reflash another bootloader, because in this state (QCOM EDL) can only be recognized and flashed with Qfil which uses the primary bootloader to flash to the secondary bootloader. This process needs the blankflash which has the files to correctly flash it. Yes the Android has another bootloader that is less user friendly to boot the other bootloader and then your ROM.
Click to expand...
Click to collapse
Hello guys hope you all are well. I have also same problem with my moto g9 plus. So do have any luck to find blank flash file for Moto g9 plus?
count me in guys...i hard bricked my device too......if anyone finds a solution should ping me here
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Yes same problem my moto g9 plus is Qualcomm edle mode please upload blank flash file
Please send blank flash file moto g9 plus Odessa xt2087-2
Yeah there is no blankflash files I have been able to get. So I just got a new device.
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Same problem Motorola G9 plus Odessa hardbrick bootloader doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
Motorola G9 plus Odessa hardbrick doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
(Moto g9 plus Odessa xt2087-2)
asimali2243 said:
count me in guys...i hard bricked my device too......if anyone finds a solution should ping me here
Click to expand...
Click to collapse
Yes same i waiting for blank flash file Moto g9 plus Odessa xt2087-2 qpas 30 firmware
Not response my problem...?
?
hello guyes my phone is dead any solution
I can appreciate some help I bought a Motorola edge s pro from AliExpress with the bootloader unlocked and global rom installed and then flashed it with the current retail version rras31.q3-19-86-4 which went good until I enabled "ram boost" under system->performance followed by restarting the device but now the device won't power back on holding that button nor can I enter into fastboot/recovery modes with power+vol down shortcuts, is this device hard bricked, soft bricked with the ram boost on and bootloader unlocked?
I get the qdloader 9008 active under my ports and the led light flashing when I hold the power on a few seconds. I tested blankflash from pstar and everything completed but still no bootloader shows after I ran that process. do I need another blankflash version that matches the stock firmware on this model? anybody brick theirs turning ram boost on?
I tried this blankflash retail from lolinet blankflash_pstar_RRA31.Q3-19-50 since I can't find the latest Q3-19-86-4 retail blank flash, any input would be much appreciated. thanks
Motorola Blankflash
Request blankflash by giving device informations
t.me
kevin2025 said:
I tried this blankflash retail from lolinet blankflash_pstar_RRA31.Q3-19-50 since I can't find the latest Q3-19-86-4 retail blank flash, any input would be much appreciated. thanks
Click to expand...
Click to collapse
i can find the blankflash but no hope for my device @
I'll look into this, thank you, does the blank flash need to match the current firmware version installed?
i managed to recover the fastboot using a Motorola g100 blank flash.
blankflash_nio_retca_RRTS31.Q1-84-24-3-6
You have to run blankflash when your phone is disconected with computer. Next, you must put usb cable in. It's already worked for my Motorola 20 PRO.
kevin2025 said:
i managed to recover the fastboot using a Motorola g100 blank flash.
blankflash_nio_retca_RRTS31.Q1-84-24-3-6
Click to expand...
Click to collapse
A new version pstar_cmcc_user_12_S1RAA32.54-36_8e137-74e54_release-keys_cmcc_CN found on telegram Motorola blankflash group. It bring my phone back
Hey guys,
maybe I'm just dumb, maybe it's just horror. Let's start the journey of my problems. My Android version is 10, with security update from 1. December 2020. Software version "V30e-EUR-xx", Kernel 4.9.193. Model is LM-V405EBW. First, I tried following this guide:
[GUIDE] Unlock your LG V40 via 9008 mode (Every Variant except T-Mobile)
This Guide will explain how to unlock your LG V40 (Every variant except T-Mobile) Unlock Prerequisites: Make sure you have "Enable OEM Unlock" enabled in developer options, along with adb debugging. Very important. You'll be stuck with the red...
forum.xda-developers.com
After finally getting the drivers to work and the phone being recognized as "Qualcomm HS-USB QDLoader 9008" under "Kedacom USB Device" in the device manager in EDL mode, storage was set to ufs, the prog_ufs_firehose_Sdm845_lge.elf was selected, I loaded the v35eng.img onto the abl_a and every step seemed to work just as intended, until I entered the bootloader menu. When I try to set the command "fastboot oem unlock", it said:
FAILED (remote: unknown command)
finished. total time: 0.002s
Under fastboot devices, my device says:
LMV405EBW80f37c1d
Isn't it supposed to say something like "LMV350..."? According to a YT video, it does (for me, makes sense with v35eng being flashed as well). And then I realized this guide was only supposed to work with Android Oreo. So I first tried to unlock the bootloader the official way, just to realize that LG has completely terminated the dev program and the ":fastboot flash unlock unlock.bin" command won't bring be anywhere, since I'll not be able to get the unlock.bin from LG. So I went on and tried to crossflash it back to Oreo... well...
Since the driver in the device manager said "LGE Mobile USB Serial Port" in download mode (while still saying "Qualcomm HS-USB QDLoader 9008" in EDL mode), I tried to flash an old Oreo .kdz for my exact device, first using LGUP, using this guide:
[GUIDE] LGUP for all (no root needed)
Greetings everyone, i go by the name Ainz Ooal Gown. Here i bring you the Official Guide on LGUP to fix a Brick of your device or to simply Cross flash/Upgrade your device from Windows. First things first if you try this and end up with a brick...
forum.xda-developers.com
... stuck at error message. LGUp says:
Error: 0x6004, CrossDL
judypn_lao_eea>@judypn_la (can't read the rest)
Then I tried LG Flash Tool... again, stuck at error message, it says:
Please install CSMG B2C Client Tool
Select Tool -> B2C Client Setup Menu
Trying to get Flash Tool to work, I downloaded LG Mobile Support Tool, since it's supposed to have that B2C Client Tool (and not a single source of B2C Client Tool was online anymore), but that doesn't install at all, probably because LG terminated that as well.
Am I just THAT lost or is it really THAT hard to unlock a simple bootloader? Never experienced something even remotely as frustrating as that right here. Neither with the LG G3, nor G5, nor V30. Thinking about giving up... I mean, it still boots...
If you have the solution, I'd be very thankful of your help.
Edit: Found out myself. Not only abl_a.bin needs to be flashed via QFIL, but abl_b as well. When in fastboot mode, also just flash both backup .bins to the device and then restart.