Related
i tried flashing the stock firmware on my moto e4 plus and now it wont turn on or charge
is there any way to fix this?? getting it repaired is not an option
Replacement
yes
lbxda said:
i tried flashing the stock firmware on my moto e4 plus and now it wont turn on or charge
is there any way to fix this?? getting it repaired is not an option
Click to expand...
Click to collapse
Using SP Flash tool. Download the stock rom and u can. There are many tutorials in the net. but it will be a problem to fix your imei. That will be lost. So you will need a nvram backup to flash after.
I bricked my phone, but could get it back. With different imei, after many efforts and researchs.
alegmx said:
Using SP Flash tool. Download the stock rom and u can. There are many tutorials in the net. but it will be a problem to fix your imei. That will be lost. So you will need a nvram backup to flash after.
I bricked my phone, but could get it back. With different imei, after many efforts and researchs.
Click to expand...
Click to collapse
:An assumption:
I don't think that flash tool will work on that device without being able to boot into Bootloader/Fastboot mode.. If I'm wrong, then plz explain for the rest of us? Does it allow bootloader access? (Hold pwr + vol down when booting
bcrichster said:
:An assumption:
I don't think that flash tool will work on that device without being able to boot into Bootloader/Fastboot mode.. If I'm wrong, then plz explain for the rest of us? Does it allow bootloader access? (Hold pwr + vol down when booting
Click to expand...
Click to collapse
If he has a Mediatek Variant, using Mriacle tool + dongle can fix this type of brick.
lbxda said:
i tried flashing the stock firmware on my moto e4 plus and now it wont turn on or charge
is there any way to fix this?? getting it repaired is not an option
Click to expand...
Click to collapse
Which e4 plus device, Nicklaus (mediatek) or Owens (Qualcomm)?
Sent from my Moto E (4) Plus using Tapatalk
try this
I'M NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE. FOR MTK DEVICES ONLY
0 for all these the device must have minimum 30% battery
1 download your stock firmware
2 format device using sp flash tool>load the scatter file>select format tab>click start>connect usb cable by pressing and holding both volume down and power button until your phone detected. if detected release both buttons. some times it helps to recover
3 flash the firmware if the device detected & successfully formatted. note it may remove your nvram.
4 check https://forum.xda-developers.com/moto-e4-plus/how-to/fixed-moto-e4-plus-xt1771-unknown-t3831831 for how to recover imei and nvram
Can someone please help me? I also have the Moto e4 Plus (XT1776) Qualcomm variant and I bricked mine also... it won't turn on or anything... but windows 10 detects it as QUALCOMM device. Someone please? Anything will be greatly appreciated.
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Hold power and volume down til reboot into "bootloader" mode, plug usb-c cable to PC, then reflash later stock rom
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
You have to go to the service center.
Hey msobarzoe13, I am using moto g6 and from India. When android p soak test was leaked as everyone out there, I tried it. It was good except for some network issues. So I decided to revert back to the stock firmware. I downloaded the OS and flashed it and faced the same issue. I tried several times but no luck. I was not even able to unlock the bootloader because I didn't turn on OEM unlock under settings. So I took it to the service center. The best part is by installing Beta your warranty is void. So I did it through the service center. They told Moto G6 series is very secured so flashing it with a leaked software is prevented. I don't know why. So don't take a further risk, take it to the service center.
Omar04 said:
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
Click to expand...
Click to collapse
What you mean with "OG firmware" and what if the motorola is totally hardbricked? I mean not able to go to bootloader or recovery or even fastboot because he didnt turn on android debugging oem?
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
If your bootloader is still locked just take it to a moto service centre, I also tried downgrading and took it to service centre they fixed it
I have also hard bricked my moto g6 while updating. There was an OTA update and i started update without noticing my battery percentage. Now i have hard bricked dead moto g6. There is no response at all. Only life in my device is that it is detected as Qualcomm HS-USB QLoader 9008 in pc.
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Jefersonrr said:
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Click to expand...
Click to collapse
Same problem with me also. It may be detected as qualcomm hs-usb qloader 9008 while you connect in pc. If that is the problem than we need blank flash file which is not available right now. Either we have to send our device to service center for motherboard replacement or we need to wait for blank flash file which is not possible to come because these files are sensitive to motorola. another solution is if some one provide me mmcblk0.img of moto g6 than i might be able to boot it from sd card and may revive it again.
My Moto G6 Ali got hardbricked also plzzz help anyone solved it or have blankflash HE
Do anyone got any solution regarding this then plzzz help
:crying::crying::crying::crying::crying::crying:
Or email me at
??
[email protected]
Please help
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Well mine works as follows
Turn off device
Hold vol down and power button, this should take to recovery menu
Select recovery - it will take to a no command screen
Hit power and up once.
That's how I hard reset my g9
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Download the rescue software from the official Lenovo page, it will guide you, maybe you can recover your device, use fastboot to try to put it in mode, good luck
Your phone is bootloader bricked, try blankflashing it. It is already in EDL mode since you got the qualcomm HS Usb
Hi, mrsiri. There isn't any blank flashes available as far as I'm aware.
That's too bad. From my understanding the "Qualcomm HS-USB Loader 9008" showing up means your bootloader is corrupted. That's why you can't get into fastboot and nothing shows up on your screen. By applying a blankflash you could reflash your bootloader, but since there isn't any blankflash available yet you'll have to wait for one.
my Motorola G9 Plus has also been bricked and the only vital sign is that when I connect it to PC it shows that a usb device is connected (lsusb command execution result: Qualcomm, Inc. Gobi Wireless Modem (QDL mode) ) and nothing else appears, i.e. the phone screen is off and in black state and it enters neither recovery nor fastboot mode.
can anyone help to recover the device?!
mohammad_d said:
my Motorola G9 Plus also has been bricked and the only vital sign is that when I connect it to PC it shows that a usb device is connected (lsusb command execution result: Qualcomm, Inc. Gobi Wireless Modem (QDL mode) ) and nothing else appears, i.e. the phone screen is off and in black state and it enters neither recovery nor fastboot mode.
can anyone help to recover the device?!
Click to expand...
Click to collapse
It doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
mrsiri said:
It doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
Click to expand...
Click to collapse
Can I use it's warranty in Motorola warranty dealers and revive the device or provide any bootloader from another same device or any other way?
mohammad_d said:
Can I use it's warranty in Motorola warranty dealers and revive the device or provide any bootloader from another same device or any other way?
Click to expand...
Click to collapse
I don't know of any other method than Blankflashing that could revive your phone in this state. Your warranty was voided right after you unlocked your bootloader, so I don't think they would accept fixing it. The Problem is you can't simply reflash another bootloader, because in this state (QCOM EDL) can only be recognized and flashed with Qfil which uses the primary bootloader to flash to the secondary bootloader. This process needs the blankflash which has the files to correctly flash it. Yes the Android has another bootloader that is less user friendly to boot the other bootloader and then your ROM.
mrsiri said:
I don't know of any other method than Blankflashing that could revive your phone in this state. Your warranty was voided right after you unlocked your bootloader, so I don't think they would accept fixing it. The Problem is you can't simply reflash another bootloader, because in this state (QCOM EDL) can only be recognized and flashed with Qfil which uses the primary bootloader to flash to the secondary bootloader. This process needs the blankflash which has the files to correctly flash it. Yes the Android has another bootloader that is less user friendly to boot the other bootloader and then your ROM.
Click to expand...
Click to collapse
Hello guys hope you all are well. I have also same problem with my moto g9 plus. So do have any luck to find blank flash file for Moto g9 plus?
count me in guys...i hard bricked my device too......if anyone finds a solution should ping me here
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Yes same problem my moto g9 plus is Qualcomm edle mode please upload blank flash file
Please send blank flash file moto g9 plus Odessa xt2087-2
Yeah there is no blankflash files I have been able to get. So I just got a new device.
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Same problem Motorola G9 plus Odessa hardbrick bootloader doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
Motorola G9 plus Odessa hardbrick doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
(Moto g9 plus Odessa xt2087-2)
asimali2243 said:
count me in guys...i hard bricked my device too......if anyone finds a solution should ping me here
Click to expand...
Click to collapse
Yes same i waiting for blank flash file Moto g9 plus Odessa xt2087-2 qpas 30 firmware
Not response my problem...?
?
hello guyes my phone is dead any solution
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Update: If someone would be able to extract a scatter file from their own OnePlus Ace too, I think that may help me
Sorry that you've ran into this, but thanks for confirming bootloader can be unlocked, and root is possible.
Getting the 10R over the Realme GT 2 (sad situation of bootloader unlock not possible). Hope you get an extract soon
Made some progress!
Got my hands on the Ace's firmware files, which included the scatter file. Redownloaded the newest 6.2 version of SP Flash Tool and loaded the scatter and auth files successfully. Clicked download, connected USB to phone while holding Vol + and Vol - and finally! Sp Flash Tool connected to the phone! However, now I've run into another problem: SP Flash Tool will show a red progress bar at the bottom saying 'Download DA', it will reach 100% quickly then throw me a very vague error simply saying 'error_msg'. And that's it. Tried unchecking different boxes, reinstalled drivers but it will always throw back this error.
Any ideas to figure out what the error is and fix it would be amazing
hello, im here to show support. My ace also bricked because i want to change from color os to oxygen. I used fastboot enhanced, might have missed a step and bricked. Mine also import, but the shop i bought offers 1 year warranty. Shop says have to wait for msm download tools to reflash or i have to pay $60 to send back to China because my own fault. Man, it is going to be a long wait for msm tools. haha
KeepingKeyes said:
saying 'error_msg'.
Click to expand...
Click to collapse
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
DimRim said:
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
Click to expand...
Click to collapse
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
KeepingKeyes said:
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
Click to expand...
Click to collapse
maybe this is because of the new chip and there is no support for bypassing it.I thought the method would work.also a tip-edit the scatter file, namely partition_name: super or system,changing the value is_download: false to is_download: true.hopefully help
And thank you for sharing the files
I too am stuck with Brick.
Is there a Bypass for the Demesity 8100 being developed?
This device is mostly Oppo, but there is no Oppo flash Tool?
There is very little information available.
KeepingKeyes said:
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
Still stuck or were you able to find any solution?
yashaswee1708 said:
Still stuck or were you able to find any solution?
Click to expand...
Click to collapse
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
KeepingKeyes said:
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
Click to expand...
Click to collapse
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
yashaswee1708 said:
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
Click to expand...
Click to collapse
I seem to have made fastboot inaccessible on my device, so I've been unable to use Fastboot enhance or utilise any ways to flash using fastboot
Damn!! I hope you find some way to fix your device. Good luck.
关于一加ACE如何优雅的刷入氧OS12.1这件事 来自 天伞桜 - 酷安
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
GTAstar said:
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
Click to expand...
Click to collapse
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
hamsteer said:
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
Click to expand...
Click to collapse
Are you still able to boot to Fastboot?
yashaswee1708 said:
Are you still able to boot to Fastboot?
Click to expand...
Click to collapse
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
hamsteer said:
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
Click to expand...
Click to collapse
So you are not able to boot right?
If not, you can try flashing the partitions manually from fastboot. (If you are willing to try I can provide the steps. This works for other OnePlus devices.)