Database Develop

[HELP] Finding Product ID of Che1-L04

My Phone is currently in a boot-loop. I can't boot it into recovery mode and fastboot is locked. I need the product ID for unlocking. Please help me.

christythomas said:
My Phone is currently in a boot-loop. I can't boot it into recovery mode and fastboot is locked. I need the product ID for unlocking. Please help me.
IMEI 1 : 866..........................
IMEI 2 : 866..........................
S/N : A6T4C15612015088
Click to expand...
Click to collapse
How did it got bootloop ? Plz elaborate

gopinaidu77 said:
How did it got bootloop ? Plz elaborate
Click to expand...
Click to collapse
I don't know how this happened. One day my phone just got off and when i turned on the LED was blinking, i thought power was low. So i charged the phone . Then i tried to turn it on then it is showing the Fastboot mode and nothing more. I was terrified by that, it was to sudden and i didn't unlock the phone. I have a RedMi Note 4G and i know the flashing and other stuffs. Now i need the Unlock code but to get that i have to give the product ID. There is no way to get that without through the phone Dialer. I am totally screwed without the unlock code there phone is same as a Brick. PLEASE HELP ME...

christythomas said:
I don't know how this happened. One day my phone just got off and when i turned on the LED was blinking, i thought power was low. So i charged the phone . Then i tried to turn it on then it is showing the Fastboot mode and nothing more. I was terrified by that, it was to sudden and i didn't unlock the phone. I have a RedMi Note 4G and i know the flashing and other stuffs. Now i need the Unlock code but to get that i have to give the product ID. There is no way to get that without through the phone Dialer. I am totally screwed without the unlock code there phone is same as a Brick. PLEASE HELP ME...
Click to expand...
Click to collapse
Oh. That's hard. I think it's best that you bring it to a service center. There is now way to get that product ID besides the dialer.

christythomas said:
My Phone is currently in a boot-loop. I can't boot it into recovery mode and fastboot is locked. I need the product ID for unlocking. Please help me.
IMEI 1 : 866................
IMEI 2 : 8669.................
S/N : A6T4C...........8
Click to expand...
Click to collapse
there is huawei product id finder tool search on xda you will get it and give try with it.

OP , i found something for you.
https://forum.xda-developers.com/p8lite/help/product-id-using-fastboot-t3316722

gopinaidu77 said:
OP , i found something for you.
https://forum.xda-developers.com/p8lite/help/product-id-using-fastboot-t3316722
Click to expand...
Click to collapse
Already tried, but no luck..

christythomas said:
Already tried, but no luck..
Click to expand...
Click to collapse
Phone still in bootloop?

Yes it is

did you try to boot into erecovery and format your phone or download latest firmware it may solve the problem of bootloop

miststudent2011 said:
did you try to boot into erecovery and format your phone or download latest firmware it may solve the problem of bootloop
Click to expand...
Click to collapse
If the phone can boot into recovery then i can solve the problem. But currently the Fastboot mode is only booting.

christythomas said:
If the phone can boot into recovery then i can solve the problem. But currently the Fastboot mode is only booting.
Click to expand...
Click to collapse
Connect to PC with usb and restart your phone by pressing vol+ and power button it will take you to recovery

He said already he can't boot to erecovery.

He might or might not tried this procedure to boot in erecovery let him reply to the post.

miststudent2011 said:
He might or might not tried this procedure to boot in erecovery let him reply to the post.
Click to expand...
Click to collapse
It booted into Fastboot. :crying:

christythomas said:
It booted into Fastboot. :crying:
Click to expand...
Click to collapse
keep on pressing vol+ button it will take you to erecovery menu.

Volume up button on warning logo . Else u can try adb reboot recovery2 or adb reboot erecovery. One among those to takes u to erecovery

If following volume press method make sure that you disconnect your device from pc.

Oh well , if not disconnected it shows charging. Thanks for making me remember this.

Yes learnt it hard way so can't forget them that easily.

bootloop or bricked?

yesterday im trying to unroot my gr3 2017/p8 lite 2017 and i successfully unroot it using a flashable zip file i dont remember
that thread here in xda also.. after unrooting my phone i decided to relocked it using my flash oem relock unlock codes
after entering that codes it prompts saying would you like to relocked blah blah and i tick yes and boom it relocks after booting bam my phone stock in eRecovery i tried everything volume up plus power button all ways of button tricks and still im stock in eRECOVERY EMUI please somebody help me i think my OS also disappear even my twrp disappear.. please help me

arthro1987 said:
yesterday im trying to unroot my gr3 2017/p8 lite 2017 and i successfully unroot it using a flashable zip file i dont remember
that thread here in xda also.. after unrooting my phone i decided to relocked it using my flash oem relock unlock codes
after entering that codes it prompts saying would you like to relocked blah blah and i tick yes and boom it relocks after booting bam my phone stock in eRecovery i tried everything volume up plus power button all ways of button tricks and still im stock in eRECOVERY EMUI please somebody help me i think my OS also disappear even my twrp disappear.. please help me
Click to expand...
Click to collapse
Relock your phone again. Flash now the stock recovery. Then it's alright.

i think you didnt understand what im saying bro. i unroot and relocked already after relocking my phone got stock in eRecovery and i cant get out even unlocking again etc. still im stock

To complete your initial operation, you need the recovery. From your description, I see you had TWRP before. That will not do. Flashing in the bootloader you can only unlock with OEM. So, relock, recovery flash and then lock again.

ChinHon said:
To complete your initial operation, you need the recovery. From your description, I see you had TWRP before. That will not do. Flashing in the bootloader you can only unlock with OEM. So, relock, recovery flash and then lock again.
Click to expand...
Click to collapse
yes your right after relocking my phone i lost my twrp.. thats the time im stock in eRecovery... did you mean that i will unlock it again? not relock cause it is already relocked sir.. i will unlock it again to flash and then lock it again? the question is how? i already put my code to unlock my phone again but it doesn't work anymore cause i cant flash using adb fastboot anymore.. adb fastboot cant read my phone since i relocked.. sorr for my bad english.. i hope you understand what im saying..

My English is also not better. I understand you. Have you ever tried the device with key combi in the recovery to start, without usb cable? Separated from pc and charger?

ChinHon said:
My English is also not better. I understand you. Have you ever tried the device with key combi in the recovery to start, without usb cable? Separated from pc and charger?
Click to expand...
Click to collapse
how sir? i dont get what you mean... can you please show me a tutorial?

So I wrote it in my root tutorial:
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA is separated, only from the PC is not sufficient.

ChinHon said:
So I wrote it in my root tutorial:
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA is separated, only from the PC is not sufficient.
Click to expand...
Click to collapse
i tried it all sir fastboot mode is working but cant read my phone in adb fastboot tool
vol. up plus power button is the same it still stock on eRecovery when booting.. is my phone dead already??

With the PC program "DC Phönix" you can save it again. Unfortunately I do not know about it. Google knows more.

ChinHon said:
With the PC program "DC Phönix" you can save it again. Unfortunately I do not know about it. Google knows more.
Click to expand...
Click to collapse
i hope someone will help me with that... thanks bro for your help

i need your help here guys please help me recover my phone

Unlock again from bootloader and flash a TWRP Backup from xda thread
'

Moto e4 plus TWRP bootloop

hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.

swapnil-15 said:
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
Click to expand...
Click to collapse
Sounds like ya accidentally flashed the recovery to boot partition

I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .

swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed

bcrichster said:
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
Click to expand...
Click to collapse
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:

swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
I dunno about any SP flash tool, I used the minimal ADB fastboot..
Running some Xper!meπts from my Moto E (4) Plus

swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441

same happened here looking for a solution .. worked 2 times and on both got stuck on "editing partition details"while wiping data.. first time worked and pressing holding the power button restarted and flashed again twrp and worked. 2nd time it went in twrp boot loop. :/
any solutions to our same problem ??????

I have also the same problem with my device Bluboo-S1 and TWRP v3.2.1 without solution

Use TWRP v3.1.1-0 for wiping encryption, upgrade TWRP after ya get your ROM booting. Some ppl are reporting success via booting from TWRP to bootloader, then hitting START.. Not all devices are doing this tho, you may have that rare one which requires it..

koop1955 said:
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
Click to expand...
Click to collapse
The link you have given is for Owens not for Nicklaus.
Mine is Moto e4 plus (xt1770). So the main point is can i use this method for Nicklaus (xt1770)
Please help me I'm stucked in twrp boot loop :crying::crying:

How did u solve the problem? coz the same thing happened with me right now, if you have any solution then plz tell me.

my moto e4 plus is stuck on orange screen after flashing twrp
my moto e4 stuck on orange state showing message "orange state device cannot be trusted ,you device will boot in 5 sec" and it stuck on boot loop.
this problem occured when i flashed twrp into my phone.i reboot the device then it goes to orange state.after that i cant able to boot the boot loader.
i cant able to boot into bootloader or fastboot mode..
please help me.

How did you resolve this problem.

swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
did you found any way to unbrick your phone? actually me too has this problem.

Doogee X5 bricked

Hello, anyone knows a solution for a X5 bricked. It's not my phone, someone gave it to me because a bootloop, I try hard reset without luck, after I download original rom from doogee, but there was a problem, two version B and not B, I didn't know wich to flash, I enter recovery mode and it says 6.0, I guess was B version and flash it with sp tool ( with everything ticked even preeloader) after sucessful flash phone doesn't turn on, when I connected to usb with volumen up instead of MTK preloader port it says only MTK Port, I read on some forums that is because flash wrong preloader, is possible a solution? Thank you.

same
same here i dont know what to do

ItsMeLuka said:
same here i dont know what to do
Click to expand...
Click to collapse
If you're still wondering about I hardbricked my x5 pro. Got it going again

verified boot
edbell420 said:
If you're still wondering about I hardbricked my x5 pro. Got it going again
Click to expand...
Click to collapse
I am wondering if you were able to flash the boot image using sp flash tool. I keep getting an error telling me to disable verified boot. please help

Phone in Hard Brick mode

I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?

You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room

Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0

when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?

It worked, but how did you know all this? Just spot on :good:

I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!

Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress

Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?

Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9

dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!

htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?

I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.

Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc

Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs

Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.

Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?