Database Develop

Bricked Mi3 - Showing QHUSUB Bulk in PC

I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.

Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.

I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no

partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone

murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm

I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g

@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol

you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt

If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .

and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))

Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!

From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?

Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!

coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?

回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4

coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then

Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking

coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?

Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583

Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..

Mi5 dead! please some ideas!

Hi all,
I going to tell you the complete story and any ideas orsuggestions will be appreciated.
I bought my mi5 in July. It came with a fake ROM but Ichanged it to OFFICAL GLOBAL STABLE .
Since then, I used the device perfectly fine, and follow theMIUI forum regularly.
Then in November I applied for betatesting Team and theyaccepted me. As my bootloader was still locked, I tried option one from abovetutorial, so I directly downloaded in my phone the GLOBAL DEV ROM and Ichoosing the package I started using Nougat for about a month, more or less.
Then, the tragedy happened. I was in a bar, having my phonein my trousers back pocket, and I set down that way. One minute, no more. Thephone´s battery was around 70%. When I realized I quickly took it but it wasnot able to turn on… Nothing pressing power volume + or any combination… I came home and let it charging all night (wallcharger) and nothing the morning after.
I tried to connect it to my PC but nothing happened in the screen,but pressing Power Volume+ the Windowsdevice Manager recognized it as “Android phone”, so after reading some threads about bootloader issues I decidesto flash it. I requested permission and then flashed it with the latest CHINADEV version. The flashing was completed, but the phone still not turningon. NEXT STEP: Local Technical Service.
They had my phone during a week. They tried to change thescreen, nothing, the battery nothing, and I don’t know which other tests theyperformed but they called me back to tell they were not able of doing nothing.
Having the phone back at home, now I was not able to get thePC seeing it as Android phone again. Nothin. Desperate me, I continued to read in internet and found in XDA a video where basically, you open the phone (remove back, and some screws),short two pins, and the PC is able to see it through the Qualcomm USB driversin EDL mode. Then flashing IS POSSIBLE. That is true. I am able to flashing,and I have tried CHINAs, GLOBAL, older ROMs about a dozen. Always the flash processsucceed, but the phone still not turning on.
After flashing I let the phone the whole night plugged inthe PC usb. Nothing
Now is plugged again to the wall charger, but nothing.
There are many threads with different solutions, so guys,please, anyone with a good idea to try??
Many Many thanks in advanced

https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Read this and
Use only the versions mentioned

this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .

I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!

xmmn said:
this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .
Click to expand...
Click to collapse
Which 7.2.4 please??

[email protected] said:
Which 7.2.4 please??
Click to expand...
Click to collapse
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google

xmmn said:
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google
Click to expand...
Click to collapse
not worked

Nbkdnssr said:
I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!
Click to expand...
Click to collapse
im not able to find the rom... could you help me?

[email protected] said:
im not able to find the rom... could you help me?
Click to expand...
Click to collapse
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/

Nbkdnssr said:
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/
Click to expand...
Click to collapse
Thanka for your hel but finally not worked...

Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.

JJeamy said:
Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.
Click to expand...
Click to collapse
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?

[email protected] said:
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?
Click to expand...
Click to collapse
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..

JJeamy said:
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..
Click to expand...
Click to collapse
Can you help me to find a correct ROM to try?

[email protected] said:
Can you help me to find a correct ROM to try?
Click to expand...
Click to collapse
You can try this official global stable fastboot rom that's still based android 6.0 here
If above direct link doesn't work..just visit this link , then choose "Xiaomi Mi5 Global Stable or China Stable Version Fastboot File Download..
If getting error while flashing..just put extracted folder of fastboot rom in the root of your system..ie C:\[folder_fasboot_rom]

Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!

[email protected] said:
Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!
Click to expand...
Click to collapse
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?

[email protected] said:
not worked
Click to expand...
Click to collapse
Did you test it?
Keyvannn said:
Solved with this way
Originally Posted by adwinp
1: if you're detecting it as qcom 9008, there's a good chance it's in EDL mode, which is good news
2: download MiFlash from here: https://www.androidfilehost.com/?fid=24521665358595574
3: download the latest dev rom from here: http://update.miui.com/updates/v1/fu...ni&b=X&r=cn&n=
4: Extract the files to C:\
5: Open MiFlash & point the folder to the root ROM folder, example: C:\gemini_foo_bar, NOT C:\gemini_foo_bar\images
6: connect your phone & select flash all (1st option from the left, bottom of MiFlash tool)
This might take a few tries (example - you might receive "missed hello packets)
Once you're done, you can stay with the China Dev, unlock the bootloader & flash a xiaomi.eu rom, or CM.
Good luck.
Click to expand...
Click to collapse
------
I do this way several time but with updated miflash and fastboot rom and nothing happen.
But with this mi flash and global stable 7.2.4 and only selected #all flash#
My phone flashed
Im very happy
Thanks alot
Sorry for my bad english
Click to expand...
Click to collapse

Keyvannn said:
Did you test it?
Click to expand...
Click to collapse
I tried this and not worked for me...

JJeamy said:
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?
Click to expand...
Click to collapse
I havent tried yet QFIL, but I will and let you know... Thanks so much!

Moto e4 plus TWRP bootloop

hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.

swapnil-15 said:
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
Click to expand...
Click to collapse
Sounds like ya accidentally flashed the recovery to boot partition

I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .

swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed

bcrichster said:
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
Click to expand...
Click to collapse
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:

swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
I dunno about any SP flash tool, I used the minimal ADB fastboot..
Running some Xper!meπts from my Moto E (4) Plus

swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441

same happened here looking for a solution .. worked 2 times and on both got stuck on "editing partition details"while wiping data.. first time worked and pressing holding the power button restarted and flashed again twrp and worked. 2nd time it went in twrp boot loop. :/
any solutions to our same problem ??????

I have also the same problem with my device Bluboo-S1 and TWRP v3.2.1 without solution

Use TWRP v3.1.1-0 for wiping encryption, upgrade TWRP after ya get your ROM booting. Some ppl are reporting success via booting from TWRP to bootloader, then hitting START.. Not all devices are doing this tho, you may have that rare one which requires it..

koop1955 said:
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
Click to expand...
Click to collapse
The link you have given is for Owens not for Nicklaus.
Mine is Moto e4 plus (xt1770). So the main point is can i use this method for Nicklaus (xt1770)
Please help me I'm stucked in twrp boot loop :crying::crying:

How did u solve the problem? coz the same thing happened with me right now, if you have any solution then plz tell me.

my moto e4 plus is stuck on orange screen after flashing twrp
my moto e4 stuck on orange state showing message "orange state device cannot be trusted ,you device will boot in 5 sec" and it stuck on boot loop.
this problem occured when i flashed twrp into my phone.i reboot the device then it goes to orange state.after that i cant able to boot the boot loader.
i cant able to boot into bootloader or fastboot mode..
please help me.

How did you resolve this problem.

swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
did you found any way to unbrick your phone? actually me too has this problem.

Soft Bricked Redmi 4X Global, Can't find solution, please help me :(

Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits

try booting recovery from fastboot "fastboot boot *twrp image*.img"

Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.

Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it

Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped

Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.

Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse

chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz​With miflash-20220218 in edl mode .

ASUS ROG2 SOFT BRICK

Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.

KnowThyPro said:
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
Click to expand...
Click to collapse
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.

reg66 said:
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
Click to expand...
Click to collapse
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.

KnowThyPro said:
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
Click to expand...
Click to collapse
Any news?

reg66 said:
Any news?
Click to expand...
Click to collapse
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.

KnowThyPro said:
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
Click to expand...
Click to collapse
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?

reg66 said:
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
Click to expand...
Click to collapse
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?

KnowThyPro said:
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
Click to expand...
Click to collapse
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest

reg66 said:
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
Click to expand...
Click to collapse
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.

KnowThyPro said:
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
Click to expand...
Click to collapse
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?

reg66 said:
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
Click to expand...
Click to collapse
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...

KnowThyPro said:
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
Click to expand...
Click to collapse
I've been googling for you dude but no joy yet.... will have another look tomorrow

reg66 said:
I've been googling for you dude but no joy yet.... will have another look tomorrow
Click to expand...
Click to collapse
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/

was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?

Sorry bud, really not sure what's going on with your phone or know much more. Good luck with it tho

KnowThyPro said:
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Click to expand...
Click to collapse
Actually, if you now have recovery, what about booting into twrp and flashing lastest 2012.65 zip from asus website, twice - both slots. see if that fixes your wifi issue
As you said using the QFIL approach worked to boot into system and recovery is back - boot to twrp from that state

KnowThyPro said:
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
Click to expand...
Click to collapse
I think my i messed my phone like yours. Can you provide me step by step? I have tried those step one by one but still stuck at rog logo