Hi all,
I going to tell you the complete story and any ideas orsuggestions will be appreciated.
I bought my mi5 in July. It came with a fake ROM but Ichanged it to OFFICAL GLOBAL STABLE .
Since then, I used the device perfectly fine, and follow theMIUI forum regularly.
Then in November I applied for betatesting Team and theyaccepted me. As my bootloader was still locked, I tried option one from abovetutorial, so I directly downloaded in my phone the GLOBAL DEV ROM and Ichoosing the package I started using Nougat for about a month, more or less.
Then, the tragedy happened. I was in a bar, having my phonein my trousers back pocket, and I set down that way. One minute, no more. Thephone´s battery was around 70%. When I realized I quickly took it but it wasnot able to turn on… Nothing pressing power volume + or any combination… I came home and let it charging all night (wallcharger) and nothing the morning after.
I tried to connect it to my PC but nothing happened in the screen,but pressing Power Volume+ the Windowsdevice Manager recognized it as “Android phone”, so after reading some threads about bootloader issues I decidesto flash it. I requested permission and then flashed it with the latest CHINADEV version. The flashing was completed, but the phone still not turningon. NEXT STEP: Local Technical Service.
They had my phone during a week. They tried to change thescreen, nothing, the battery nothing, and I don’t know which other tests theyperformed but they called me back to tell they were not able of doing nothing.
Having the phone back at home, now I was not able to get thePC seeing it as Android phone again. Nothin. Desperate me, I continued to read in internet and found in XDA a video where basically, you open the phone (remove back, and some screws),short two pins, and the PC is able to see it through the Qualcomm USB driversin EDL mode. Then flashing IS POSSIBLE. That is true. I am able to flashing,and I have tried CHINAs, GLOBAL, older ROMs about a dozen. Always the flash processsucceed, but the phone still not turning on.
After flashing I let the phone the whole night plugged inthe PC usb. Nothing
Now is plugged again to the wall charger, but nothing.
There are many threads with different solutions, so guys,please, anyone with a good idea to try??
Many Many thanks in advanced
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Read this and
Use only the versions mentioned
this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .
I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!
xmmn said:
this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .
Click to expand...
Click to collapse
Which 7.2.4 please??
[email protected] said:
Which 7.2.4 please??
Click to expand...
Click to collapse
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google
xmmn said:
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google
Click to expand...
Click to collapse
not worked
Nbkdnssr said:
I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!
Click to expand...
Click to collapse
im not able to find the rom... could you help me?
[email protected] said:
im not able to find the rom... could you help me?
Click to expand...
Click to collapse
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/
Nbkdnssr said:
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/
Click to expand...
Click to collapse
Thanka for your hel but finally not worked...
Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.
JJeamy said:
Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.
Click to expand...
Click to collapse
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?
[email protected] said:
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?
Click to expand...
Click to collapse
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..
JJeamy said:
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..
Click to expand...
Click to collapse
Can you help me to find a correct ROM to try?
[email protected] said:
Can you help me to find a correct ROM to try?
Click to expand...
Click to collapse
You can try this official global stable fastboot rom that's still based android 6.0 here
If above direct link doesn't work..just visit this link , then choose "Xiaomi Mi5 Global Stable or China Stable Version Fastboot File Download..
If getting error while flashing..just put extracted folder of fastboot rom in the root of your system..ie C:\[folder_fasboot_rom]
Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!
[email protected] said:
Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!
Click to expand...
Click to collapse
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?
[email protected] said:
not worked
Click to expand...
Click to collapse
Did you test it?
Keyvannn said:
Solved with this way
Originally Posted by adwinp
1: if you're detecting it as qcom 9008, there's a good chance it's in EDL mode, which is good news
2: download MiFlash from here: https://www.androidfilehost.com/?fid=24521665358595574
3: download the latest dev rom from here: http://update.miui.com/updates/v1/fu...ni&b=X&r=cn&n=
4: Extract the files to C:\
5: Open MiFlash & point the folder to the root ROM folder, example: C:\gemini_foo_bar, NOT C:\gemini_foo_bar\images
6: connect your phone & select flash all (1st option from the left, bottom of MiFlash tool)
This might take a few tries (example - you might receive "missed hello packets)
Once you're done, you can stay with the China Dev, unlock the bootloader & flash a xiaomi.eu rom, or CM.
Good luck.
Click to expand...
Click to collapse
------
I do this way several time but with updated miflash and fastboot rom and nothing happen.
But with this mi flash and global stable 7.2.4 and only selected #all flash#
My phone flashed
Im very happy
Thanks alot
Sorry for my bad english
Click to expand...
Click to collapse
Keyvannn said:
Did you test it?
Click to expand...
Click to collapse
I tried this and not worked for me...
JJeamy said:
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?
Click to expand...
Click to collapse
I havent tried yet QFIL, but I will and let you know... Thanks so much!
Related
So, I just got a brand new Xiaomi Mi A2 and it went well during one week.
Last Saturday, during an OTA official update the phone asked to reboot and never came back to life. It is stuck in the android logo.
I read some info online that said it can be flashed using fastboot and MI flashing tool. I tried to do it with the official rom, but once bootloader is locked, I was unable to do so.... Found other people saying that I could flash it using test point, but it required that I opened my phone...I don't want to lose my warranty and I'm not sure if that it will work either...
Please help me.
Ecd18 said:
...Last Saturday, during an OTA official update the phone asked to reboot and never came back to life. It is stuck in the android logo.
I read some info online that said it can be flashed using fastboot and MI flashing tool. I tried to do it with the official rom, but once bootloader is locked, I was unable to do so.... Found other people saying that I could flash it using test point, but it required that I opened my phone...I don't want to lose my warranty and I'm not sure if that it will work either...Please help me.
Click to expand...
Click to collapse
Why don't you use your warranty bringing this brick to official dealer?
As you have not unlocked phone, the only 2 variants you have: official service or test point (opening back cover and so on////)
I though that the A/B partition thing was making the phone unbrickable from system update...
Aerobatic said:
Why don't you use your warranty bringing this brick to official dealer?
As you have not unlocked phone, the only 2 variants you have: official service or test point (opening back cover and so on////)
Click to expand...
Click to collapse
Once I have bought it from a Chinese website, I would have to send it back to China and wait for their decision....Which would cost me a lot (shipping it from Portugal to China) and would make me wait about one month for the problem to be solved...
If I was 100% sure that test point method would work, I would rather do that. Solving the problem in one day.
Unlock the bootloader via Fastboot the instructions are on this site then your be able to flash the stock rom.
vuittion said:
Unlock the bootloader via Fastboot the instructions are on this site then your be able to flash the stock rom.
Click to expand...
Click to collapse
I have already tried using "fastboot flashing unlock_critical", but I just obtained an error... Is that what you are talking about?
Thank you in advance.
Ecd18 said:
I have already tried using "fastboot flashing unlock_critical", but I just obtained an error... Is that what you are talking about?
Thank you in advance.
Click to expand...
Click to collapse
fastboot oem unlock
fastboot oem unlock_critical
But first you need to enable oem unlocking from developer options. I have no idea how you can do that without a working system.
onbeskarakterli said:
fastboot oem unlock
fastboot oem unlock_critical
But first you need to enable oem unlocking from developer options. I have no idea how you can do that without a working system.
Click to expand...
Click to collapse
Yeah, I have tried "fastboot oem unlock_critical" too, same result.... How the hell can Xiaomi sent out an update that bricks their phones? If I open up the phone I will lose warranty for sure, but if I don't I'm just gonna be stuck with a brick for one month...
Also, I'm not 100% sure that test point method will work out well
Gokh said:
I though that the A/B partition thing was making the phone unbrickable from system update...
Click to expand...
Click to collapse
I missed your response earlier...
Do you know about the efficiency of test point method?
Did you have oem unlock and usb debugging enabled before you did the update
vuittion said:
Did you have oem unlock and usb debugging enabled before you did the update
Click to expand...
Click to collapse
No, it was an OTA update... I did not expected that to happen...
Ecd18 said:
No, it was an OTA update... I did not expected that to happen...
Click to expand...
Click to collapse
I had listen about a button combination 4 changing slot but I haven't try it, u can try it you don't loose nothing. U have to enter at fastboot with power button and volume - button, when u r at fastboot try the combination power button with volume + button and restart. If it will work tell me to know 4 future use.
vagsvag said:
I had listen about a button combination 4 changing slot but I haven't try it, u can try it you don't loose nothing. U have to enter at fastboot with power button and volume - button, when u r at fastboot try the combination power button with volume + button and restart. If it will work tell me to know 4 future use.
Click to expand...
Click to collapse
How long should I press "volume + button and restart"? Till the android logo appears?
Thank you in advance
Ecd18 said:
How long should I press "volume + button and restart"? Till the android logo appears?
Thank you in advance
Click to expand...
Click to collapse
It is not working i tried it.
vagsvag said:
It is not working i tried it.
Click to expand...
Click to collapse
Do you think Xiaomi will release a tool to recovery these phones?
Ecd18 said:
Do you think Xiaomi will release a tool to recovery these phones?
Click to expand...
Click to collapse
I think that xiaomi has lost the game about android one. Maybe you try a factory reset via recovery, if you don't know how to do this push power button and volume + button until you go to an empty screen with a died android and u push again power button and volume + button once to enter recovery, then wipe data and factory reset.
I've the same issue here with the phone from a firend. Never had such a nightmare with another phone (just something similar with sony)
I don't understand why they making such a "running circle"... Phone won't start after a normal OTA update, now i want to reflash the stock--> bootloader unlock required --> cannot be unocked because OEM unlock was not enabled.... OMG what a stupid system...
So gentleman, i think there is no solution for that and he have to return th phone to the seller, right?
vagsvag said:
I think that xiaomi has lost the game about android one. Maybe you try a factory reset via recovery, if you don't know how to do this push power button and volume + button until you go to an empty screen with a died android and u push again power button and volume + button once to enter recovery, then wipe data and factory reset.
Click to expand...
Click to collapse
The problem is that the phone go to recovery mode...just fastboot. Which is uselees because I haven´t enable oem unlock...
Makavelli- said:
I've the same issue here with the phone from a firend. Never had such a nightmare with another phone (just something similar with sony)
I don't understand why they making such a "running circle"... Phone won't start after a normal OTA update, now i want to reflash the stock--> bootloader unlock required --> cannot be unocked because OEM unlock was not enabled.... OMG what a stupid system...
So gentleman, i think there is no solution for that and he have to return th phone to the seller, right?
Click to expand...
Click to collapse
Some local store is charging me €35 to open up the phone and recover it through test point method... I think I'm gonna do it.
Better lose my warranty and have my phone within a day, than wait a hole month for the sellers solution...
Could you try this:
https://www.htcmania.com/showthread.php?t=1472420
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
thank you for reaching out to me, however, i tried the combo you suggested, but its stuck on the Black screen. but it does connect to the computer. i also tried the miflash tools, and im getting the red Bar.
Kenora_I said:
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
Click to expand...
Click to collapse
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
i also spent Hours trying to flash it back with the miflash tool and continue to get HELLO POCKET Error plus a few other things it keep saying. Basically getting red bar error. and the coms plus drivers are downloaded correctly. i also tried all my ports. SMH.
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happened to have his info?
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happend to have his info? and thanks for your reply and Help brother
LowaEastSide said:
would you happend to have his info? and thanks for your reply and Help brother
Click to expand...
Click to collapse
so you was stuck in a black screen as well?
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
yeah let me grab his details (he's on telegram) and yeah i was stuck on a black screen too. he was able to remote onto my computer and fix the hello packet error or write error i was getting and was able to get the edl mode flash and my phone booted up afterwards
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Yeah, I wouldn't endorse it but you can only get someone like that to fix it. Also, try paying half at the start and rest in the end cause ya don't wanna get scammed
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=V8xiNoWz-Yw Tried this ? This is for global but grab a chinese version and follow the install guide
skyler13 said:
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Click to expand...
Click to collapse
Listen, I would like to thank you for helping me out Brother. I was able to reach out to the person you recommend, however he took a few hours to respond back to be. By the time he did I already had some I found on YouTube do for me remotely as well. Only chargers me $40 US. Im pretty sure I would have been able to haggle him down but figured it was a fare price. He also was kind enough to flash the globle 12.5 ROM as well. On that note, would you know if I'll be able to receive OTA updates? Or will I have to install TWRP RECOVERY and flash the new updates when they come out.? Thanks again for your help brother.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
Problem Fixes, thanks to
Ganga -->>> [email protected]> Thanks my Brother, very honest and Knowledgeable with the Xioami Mi 11. I was VERY happy that I did have to remove the back Glass and find the 2 copper prongs like other people were forced to do. Bless.
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
There's no such thing as "bricked" in 2021... even if you have to flash it via EDL, still not bricked.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
I had same situation on Redmi K20 Pro. You'll need to flash it using Mi Flash with a dev account via EDL.
And after flashing global rom, never neeever NEVER lock it back when not having chinese rom on a chinese phone.
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Pikaone41 said:
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Click to expand...
Click to collapse
Thanks you for the EDL firmware. I will download it and just in case I'll ever need it in the future. Plus I'll keep you in mind if ever I need help in the future. Honestly, I never had such a hard time reflashing a device stuck in bootloop. I've flashed so many devices in my life time but never came across such a difficult device to repair. More thank likely I'll be sticking to OnePlus. Much easier.
Hello,
I don't know if this is right forum. If this is wrong forum, please suggest me the right one.
I have a Redmi Note 10 5G bought at China. There are all Chinese apps and No Google apps. I didn't like it so, decided to flash it into Global ROM. I have done this kind of thing many times before, but never in this device and never got this error. I downloaded the latest Global ROM which was MIUI 12.0.7.0. I extracted it and flashed using Xiaomi ADB and Fastboot tools. Everything was alright. When the device rebooted, I got:
dm-verity corruption.
Your device is corrupted.
It cannot be trusted and may not work properly.
Press power button to continue.
Or, your device will power off in 5s.
I pressed the power button and it got stuck on redmi logo forever.
Then i downloaded MIUI 12.0.6.0 Global. Then flashed it, got the same error? I tried all tricks on internet, nothing worked.
I thought Nothing is working, lets just install Chinese ROM and use it anyway. I flashed Chinese ROM and got the same error ! What is going on? What is problem?? I haven't locked bootloader
I am now hopeless. Can anyone tell me how to fix this? Should I take to somewhere to repair, or there is a trick? Any answer will be thanked!
My device:
Redmi Note 10 5G (6GB RAM 128GB ROM)
My PC:
Dell Inspiron 15 3567 (Windows 10 21H1 Latest)
Thank YOU!!!
My guess is you've re-locked phone's bootloader after flashing the ROMs in question.
No I did not Re-Lock the Bootloader
jwoegerbauer said:
My guess is you've re-locked phone's bootloader after flashing the ROMs in question.
Click to expand...
Click to collapse
no,
while for you "un known" why don't you check my post "root gained" you'll get rid of that dm-verity corruption
simika said:
no,
while for you "un known" why don't you check my post "root gained" you'll get rid of that dm-verity corruption
Click to expand...
Click to collapse
Hello, Thank you for replying. I already tried that. I wont get the error, but my phone is stuck on Redmi Logo. I don't want to fix that error. I just want to get out of bootloop. Even after I press power button, I got stuck on Redmi Logo
Un KnOwN said:
Hello, Thank you for replying. I already tried that. I wont get the error, but my phone is stuck on Redmi Logo. I don't want to fix that error. I just want to get out of bootloop. Even after I press power button, I got stuck on Redmi Logo
Click to expand...
Click to collapse
bootloop also is NOT a real one.. if you read ( or see the screenshot i previously posted in another thread , you need to press POWER button.. press it even 2 times and be sure it's going to load your phone properly !
i was in the same situation at begin and it's not a real bootloop
( and if you load vbmeta you won't even get that message/bootloop at all ! )
simika said:
bootloop also is NOT a real one.. if you read ( or see the screenshot i previously posted in another thread , you need to press POWER button.. press it even 2 times and be sure it's going to load your phone properly !
i was in the same situation at begin and it's not a real bootloop
( and if you load vbmeta you won't even get that message/bootloop at all ! )
Click to expand...
Click to collapse
WELL i tried everything you said. i even waited overnight. nothing happened only redmi logo. I took my phone to repair, so lets close this
Hat ihr Telefon schon repariert? Wieviel wurden Sie bezahlen? Mein Telefon ist wie Ihr Telefon defekt.
Has your phone been repaired yet? How much would you pay? My phone is broken like your phone.
Un KnOwN said:
Hello,
I don't know if this is right forum. If this is wrong forum, please suggest me the right one.
I have a Redmi Note 10 5G bought at China. There are all Chinese apps and No Google apps. I didn't like it so, decided to flash it into Global ROM. I have done this kind of thing many times before, but never in this device and never got this error. I downloaded the latest Global ROM which was MIUI 12.0.7.0. I extracted it and flashed using Xiaomi ADB and Fastboot tools. Everything was alright. When the device rebooted, I got:
dm-verity corruption.
Your device is corrupted.
It cannot be trusted and may not work properly.
Press power button to continue.
Or, your device will power off in 5s.
I pressed the power button and it got stuck on redmi logo forever.
Then i downloaded MIUI 12.0.6.0 Global. Then flashed it, got the same error? I tried all tricks on internet, nothing worked.
I thought Nothing is working, lets just install Chinese ROM and use it anyway. I flashed Chinese ROM and got the same error ! What is going on? What is problem?? I haven't locked bootloader
I am now hopeless. Can anyone tell me how to fix this? Should I take to somewhere to repair, or there is a trick? Any answer will be thanked!
My device:
Redmi Note 10 5G (6GB RAM 128GB ROM)
My PC:
Dell Inspiron 15 3567 (Windows 10 21H1 Latest)
Thank YOU!!!
Click to expand...
Click to collapse
1. power on phone insert usb cable mobile show dm-verity corruption option then quick click 3 time volume up and down
your mobile skip restarting
2. after phone on. go setting developer option oem on and mobile go to update option and update your phone .
Free Solution in this video
Free Software X said:
1. power on phone insert usb cable mobile show dm-verity corruption option then quick click 3 time volume up and down
your mobile skip restarting
2. after phone on. go setting developer option oem on and mobile go to update option and update your phone .
Click to expand...
Click to collapse
nice tip!
boot to fastboot and issue command " fastboot oem cdms "
will fix the dm verity issue
chopwell20 said:
boot to fastboot and issue command " fastboot oem cdms "
will fix the dm verity issue
Click to expand...
Click to collapse
how to do this pls?
heyika26 said:
how to do this pls?
Click to expand...
Click to collapse
You must have Minimal ADB and Fastboot installed in your PC.
After installing it, open it.
Write exactly the command line above.
Connect you phone via USB while is in FastBoot Mode*, with your PC.
* For FastBoot Mode on your phone, Turn OFF your phone.
Press VOL Down & Power Button for some secs together.
** Not sure if this is necessary ,but before doing all these, you have turned ON Developer Options on your phone. (search google how to enable Developer Options)
OEM Unlocking Checked & USB Debugging Checked.
Press Enter and you're done.
For me it worked!
I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....
GAGANKXDA said:
I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....Firs
Click to expand...
Click to collapse
GAGANKXDA said:
I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....
Click to expand...
Click to collapse
First of all It had happened with me several times 5 days back. It is the issue of some of the fastboot roms .I also flashed my redmi note 10S to 12.5.5 global because it was too much buggy in miui13 India version.
All you have to do is :-
{If your bootloader is unlocked
you may skip this steps}
1. unlock bootloader instantly from MTK tool using a pc .Watch videos from yt
2. Download 12.5.9 fastboot global rom It is error free { I am on this rom }
Then flash it using miflash tool
Then you may update to miui 13 from OTA itself
Himanshu98010 said:
First of all It had happened with me several times 5 days back. It is the issue of some of the fastboot roms .I also flashed my redmi note 10S to 12.5.5 global because it was too much buggy in miui13 India version.
All you have to do is :-
{If your bootloader is unlocked
you may skip this steps}
1. unlock bootloader instantly from MTK tool using a pc .Watch videos from yt
2. Download 12.5.9 fastboot global rom It is error free { I am on this rom }
Then flash it using miflash tool
Then you may update to miui 13 from OTA itself
Click to expand...
Click to collapse
Thanks but to update 12.5.9 via miflash tool i need to boot phone into fastboot mode which is not happening either..... it keeps restarting with "DM-Verity Corruption" error.. please help if you can..
And, my bootloader is already unlocked..
GAGANKXDA said:
Thanks but to update 12.5.9 via miflash tool i need to boot phone into fastboot mode which is not happening either..... it keeps restarting with "DM-Verity Corruption" error.. please help if you can..
And, my bootloader is already unlocked..
Click to expand...
Click to collapse
LET the phone be completely poweroff
press and hold powerbutton and volume down key simultaneously
Fastboot Logo appears*
Himanshu98010 said:
LET the phone be completely poweroff
press and hold powerbutton and volume down key simultaneously
Fastboot Logo appears*
Click to expand...
Click to collapse
Trust me Himanshu bhai, i have been trying this since yesterday..... it seems to an end to me now.. phone not letting it into fastboot or either into stock recovery..
I think You dont have an unlocked bootloader .
Does it continuosly restarts without any instructions given to it ??
Do you have a PC available ?
And yes one more thing That Dm verity error goes off when you press power button and the system boots to your miui rom ( if your flashing was successful
Himanshu98010 said:
I think You dont have an unlocked bootloader .
Does it continuosly restarts without any instructions given to it ??
Do you have a PC available ?
Click to expand...
Click to collapse
yes, indeed it is unlocked.. it gives a sign on unlocked lock at the top while auto reboot.. please see the attached picture & sorry for the background noise in the video..
I'm on PC itself now, trying to figure out solution....
Himanshu98010 said:
And yes one more thing That Dm verity error goes off when you press power button and the system boots to your miui rom ( if your flashing was successful
Click to expand...
Click to collapse
unfortunately i'm not able to boot into fastboot so i'm out of question for flashing any rom till this sorted out :'(
GAGANKXDA said:
unfortunately i'm not able to boot into fastboot so i'm out of question for flashing any rom till this sorted out :'(
Click to expand...
Click to collapse
Please try this method once and see if it works
Is it charged ??
Himanshu98010 said:
Is it charged ??
GAGANKXDA said:
yes, indeed it is unlocked.. it gives a sign on unlocked lock at the top while auto reboot.. please see the attached picture & sorry for the background noise in the video..
I'm on PC itself now, trying to figure out solution....
Click to expand...
Click to collapse
Press the power button once or twice when the error or The unlocked symbol pops up
Click to expand...
Click to collapse
Himanshu98010 said:
Is it charged ??
Click to expand...
Click to collapse
Come on man it is charged... btw complete message says as follows:
=================
dm-verity corruption
Your device is corrupt.
It can't be trusted and may not work properly.
Press power button to continue.
Or, device will power off in 5s
=================
This is the problem, no matter what i press it reboots & continue to flash this message as shown in previous video, whether or not i press power button..
however, i have observed that PC is deducting phone merely for some seconds when screen goes completely off while auto reboot.... highlighted in picture
You must press and hold power button and volume down quicky as soon as the screen goes off while auto reboot.
My problem was not this fatal . Still I was scared as I was doing it for the first time .