Database Develop

Mi5 dead! please some ideas!

Hi all,
I going to tell you the complete story and any ideas orsuggestions will be appreciated.
I bought my mi5 in July. It came with a fake ROM but Ichanged it to OFFICAL GLOBAL STABLE .
Since then, I used the device perfectly fine, and follow theMIUI forum regularly.
Then in November I applied for betatesting Team and theyaccepted me. As my bootloader was still locked, I tried option one from abovetutorial, so I directly downloaded in my phone the GLOBAL DEV ROM and Ichoosing the package I started using Nougat for about a month, more or less.
Then, the tragedy happened. I was in a bar, having my phonein my trousers back pocket, and I set down that way. One minute, no more. Thephone´s battery was around 70%. When I realized I quickly took it but it wasnot able to turn on… Nothing pressing power volume + or any combination… I came home and let it charging all night (wallcharger) and nothing the morning after.
I tried to connect it to my PC but nothing happened in the screen,but pressing Power Volume+ the Windowsdevice Manager recognized it as “Android phone”, so after reading some threads about bootloader issues I decidesto flash it. I requested permission and then flashed it with the latest CHINADEV version. The flashing was completed, but the phone still not turningon. NEXT STEP: Local Technical Service.
They had my phone during a week. They tried to change thescreen, nothing, the battery nothing, and I don’t know which other tests theyperformed but they called me back to tell they were not able of doing nothing.
Having the phone back at home, now I was not able to get thePC seeing it as Android phone again. Nothin. Desperate me, I continued to read in internet and found in XDA a video where basically, you open the phone (remove back, and some screws),short two pins, and the PC is able to see it through the Qualcomm USB driversin EDL mode. Then flashing IS POSSIBLE. That is true. I am able to flashing,and I have tried CHINAs, GLOBAL, older ROMs about a dozen. Always the flash processsucceed, but the phone still not turning on.
After flashing I let the phone the whole night plugged inthe PC usb. Nothing
Now is plugged again to the wall charger, but nothing.
There are many threads with different solutions, so guys,please, anyone with a good idea to try??
Many Many thanks in advanced

https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Read this and
Use only the versions mentioned

this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .

I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!

xmmn said:
this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .
Click to expand...
Click to collapse
Which 7.2.4 please??

[email protected] said:
Which 7.2.4 please??
Click to expand...
Click to collapse
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google

xmmn said:
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google
Click to expand...
Click to collapse
not worked

Nbkdnssr said:
I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!
Click to expand...
Click to collapse
im not able to find the rom... could you help me?

[email protected] said:
im not able to find the rom... could you help me?
Click to expand...
Click to collapse
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/

Nbkdnssr said:
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/
Click to expand...
Click to collapse
Thanka for your hel but finally not worked...

Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.

JJeamy said:
Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.
Click to expand...
Click to collapse
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?

[email protected] said:
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?
Click to expand...
Click to collapse
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..

JJeamy said:
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..
Click to expand...
Click to collapse
Can you help me to find a correct ROM to try?

[email protected] said:
Can you help me to find a correct ROM to try?
Click to expand...
Click to collapse
You can try this official global stable fastboot rom that's still based android 6.0 here
If above direct link doesn't work..just visit this link , then choose "Xiaomi Mi5 Global Stable or China Stable Version Fastboot File Download..
If getting error while flashing..just put extracted folder of fastboot rom in the root of your system..ie C:\[folder_fasboot_rom]

Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!

[email protected] said:
Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!
Click to expand...
Click to collapse
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?

[email protected] said:
not worked
Click to expand...
Click to collapse
Did you test it?
Keyvannn said:
Solved with this way
Originally Posted by adwinp
1: if you're detecting it as qcom 9008, there's a good chance it's in EDL mode, which is good news
2: download MiFlash from here: https://www.androidfilehost.com/?fid=24521665358595574
3: download the latest dev rom from here: http://update.miui.com/updates/v1/fu...ni&b=X&r=cn&n=
4: Extract the files to C:\
5: Open MiFlash & point the folder to the root ROM folder, example: C:\gemini_foo_bar, NOT C:\gemini_foo_bar\images
6: connect your phone & select flash all (1st option from the left, bottom of MiFlash tool)
This might take a few tries (example - you might receive "missed hello packets)
Once you're done, you can stay with the China Dev, unlock the bootloader & flash a xiaomi.eu rom, or CM.
Good luck.
Click to expand...
Click to collapse
------
I do this way several time but with updated miflash and fastboot rom and nothing happen.
But with this mi flash and global stable 7.2.4 and only selected #all flash#
My phone flashed
Im very happy
Thanks alot
Sorry for my bad english
Click to expand...
Click to collapse

Keyvannn said:
Did you test it?
Click to expand...
Click to collapse
I tried this and not worked for me...

JJeamy said:
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?
Click to expand...
Click to collapse
I havent tried yet QFIL, but I will and let you know... Thanks so much!

Mi9 Global - Accidentally locked bootloader and stock in recovery/fastboot

Hi,
Recently purchased a Mi 9 Global version, got the OTA update to MIUI 11, and everything was well. It is a superb phone, but I like to have root on my phones (mostly for Adblocking and System2, better control overall). I tried to install TWRP (custom version for Mi9) because I wanted to install Magisk/Root or try a different rom eventually. Anyway... I made a huge mistake. After trying to reboot, I noticed things had gone wrong, and was stuck in a boot loop. I guess I panicked and tried to flash the phone back to the latest global MIUI rom (Version 11, Android 10, from official site), using the Xiaomi Flash App but I did not uncheck the "clean and lock bootloader" checkbox on the bottom right of the app, which is somehow enabled by default. The flash failed at that time, for unknown reason, but it seems like it succeeded in locking my bootloader, with an empty partition, except for fastboot access and Mi Recovery module. I have to admit I've always been pretty lucky with all my previous flashes on other devices, and I guess I got a little careless. That was pretty stupid of me, in retrospect.
Since then, I am stuck in either Mi Recovery or Fastboot, and it seems that my originally Global Mi 9 with unlock bootloader has now a locked bootloader. Any attempt at either using the Xiaomi Flash utility gives me an error message ("Erase boot error"), and if I boot into Fastboot and try to flash TWRP, I get the "Remote:Erase is not allowed in Lock State" error.
From what I understand, my options are pretty limited now. The phone is still powered on, stuck in Recovery mode and rebooting every 5 or 10 minutes by itself (probably a way to avoid screen burn-in?), but I can't seem to be able to shut it down in anyway, as there are no fastboot commands to send a shutdown signal. And no matter what button combination I press, the phone always ends up rebooting.
I tried the Xiaomi Unlocker utility, but it needs the phone to be out of recovery to check the credentials binding the phone to my account. All data on the phone has been wiped already, so that's not an option. Two options I have seen :
1. Open the battery cover (required a heat gun and risky), to short some pins and try to flash while there is a short to circumvent the security. I'm not that brave yet, and since the phone is still running and has probably about 80% battery, I don't want to use a heat gun on the device.
2. Shady stuff involving paying 30 or 40 Euros to a random guy who can somehow make everything work magically by remotely logging in on my computer via Teamviewer (Not happening in a million years).
I'm wondering if there is an alternative, other than bringing the device to an official Xiaomi store (I'm in Bangkok and they do have one official shop at Fortune Town), but even then, I don't know if they'll just tell me I got myself an expensive paperweight.
Any help/insight regarding this issue would be much, much appreciated!

Have you tried to press and hold power+vol down when your device reboots? Just before it turns on.

g_seva said:
Have you tried to press and hold power+vol down when your device reboots? Just before it turns on.
Click to expand...
Click to collapse
Every possible combination on reboot will either bring me to Fastboot or Mi Recovery. I have wiped the data partition, there is no OS on the phone as of now.

Twomby said:
Every possible combination on reboot will either bring me to Fastboot or Mi Recovery. I have wiped the data partition, there is no OS on the phone as of now.
Click to expand...
Click to collapse
So xiaomi unlock utility can't unlock bootloader in fastboot?
May be try to use xiaomitool v2.

g_seva said:
So xiaomi unlock utility can't unlock bootloader in fastboot?
May be try to use xiaomitool v2.
Click to expand...
Click to collapse
Xiaomitool V2 is completely useless. The "My phone is bricked" option is not implemented, and I cannot boot into the OS, unfortunately.

To enter fastboot mode, long press the volume down key and the power key. Then unlock bootloader with Xiaomi app.

zahdekar said:
To enter fastboot mode, long press the volume down key and the power key. Then flash stock rom.
Click to expand...
Click to collapse
I have managed to enter fastboot mode, as described in my initial post. The problem is that when I try to flash, I get the following error: "Flashing not allowed in lock state".

Twomby said:
Xiaomitool V2 is completely useless. The "My phone is bricked" option is not implemented, and I cannot boot into the OS, unfortunately.
Click to expand...
Click to collapse
Yep, but it has unlock option in the normal mode and it use scripts made by tool developer, so it worth to try.

g_seva said:
Yep, but it has unlock option in the normal mode and it use scripts made by tool developer, so it worth to try.
Click to expand...
Click to collapse
From what I understand, the "normal mode" needs the tool to be able to access the OS while it's running. I don't have an OS. I will give it a shot tomorrow (3 AM here, exhausted, and don't want to boot into Windows again!), but my hopes are not so high. Anyway, thanks for the help, much appreciated! Will let you know what happens! Cheers!

https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966/amp/
maybe it will help

zahdekar said:
https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966/amp/
maybe it will help
Click to expand...
Click to collapse
I've stumbled upon this link earlier today. But it's 404 on my end. Can you access it from where you are? Thanks!

http://c.mi.com/thread-2251372-1-1.html
This is on page 4

zahdekar said:
http://c.mi.com/thread-2251372-1-1.html
This is on page 4
Click to expand...
Click to collapse
Thanks. Tried it, but using these commands only cause a reboot, to recovery mode again. Thanks again for your kind help!

Twomby said:
Thanks. Tried it, but using these commands only cause a reboot, to recovery mode again. Thanks again for your kind help!
Click to expand...
Click to collapse
I have the same problem! "The system has been destroyed" (((
And mi unlock tool not work abount 2 days (authorization not passes)

https://forum.xda-developers.com/Mi-9/help/help-bricked-mi-9-t3921980/page2
The old version of miunlock is working ti unlock bootloader.

zahdekar said:
https://forum.xda-developers.com/Mi-9/help/help-bricked-mi-9-t3921980/page2
The old version of miunlock is working ti unlock bootloader.
Click to expand...
Click to collapse
Unfortunately, this is not true. I have downloaded an old version of Mi Unlock (2.2.406.5), which is supposed to work with Fastboot mode. The result is "Couldn't unlock --> Please download the latest version". And the latest version needs to access the OS to verify the Mi account credentials. I don't have an OS installed. So this won't work. Thanks for the suggestion though!

Twomby said:
Unfortunately, this is not true. I have downloaded an old version of Mi Unlock (2.2.406.5), which is supposed to work with Fastboot mode. The result is "Couldn't unlock --> Please download the latest version". And the latest version needs to access the OS to verify the Mi account credentials. I don't have an OS installed. So this won't work. Thanks for the suggestion though!
Click to expand...
Click to collapse
Hello @Twomby did you managed to get it working it the end?

Same issue here
Hi,
I am encouraging the same issue. Does someone found a solution to this?

tago4ever said:
Hi,
I am encouraging the same issue. Does someone found a solution to this?
Click to expand...
Click to collapse
I came across this Mi8 thread, not sure if it's possible on the Mi9, but he seems to have been able to flash it through EDL mode, you might ask him the question: https://xiaomi.eu/community/threads/mi-8-bricked-from-nowhere.55723/#post-543605
There's also this Mi9 thread: https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966

Question stuck in black screen after trying to flash Global Rom "PLEASE need Help"

hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!

Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?

LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick

Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
thank you for reaching out to me, however, i tried the combo you suggested, but its stuck on the Black screen. but it does connect to the computer. i also tried the miflash tools, and im getting the red Bar.

Kenora_I said:
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
Click to expand...
Click to collapse
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!

LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)

LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
i also spent Hours trying to flash it back with the miflash tool and continue to get HELLO POCKET Error plus a few other things it keep saying. Basically getting red bar error. and the coms plus drivers are downloaded correctly. i also tried all my ports. SMH.

skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happened to have his info?

skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happend to have his info? and thanks for your reply and Help brother

LowaEastSide said:
would you happend to have his info? and thanks for your reply and Help brother
Click to expand...
Click to collapse
so you was stuck in a black screen as well?

LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
yeah let me grab his details (he's on telegram) and yeah i was stuck on a black screen too. he was able to remote onto my computer and fix the hello packet error or write error i was getting and was able to get the edl mode flash and my phone booted up afterwards

LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.

Yeah, I wouldn't endorse it but you can only get someone like that to fix it. Also, try paying half at the start and rest in the end cause ya don't wanna get scammed

LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=V8xiNoWz-Yw Tried this ? This is for global but grab a chinese version and follow the install guide

skyler13 said:
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Click to expand...
Click to collapse
Listen, I would like to thank you for helping me out Brother. I was able to reach out to the person you recommend, however he took a few hours to respond back to be. By the time he did I already had some I found on YouTube do for me remotely as well. Only chargers me $40 US. Im pretty sure I would have been able to haggle him down but figured it was a fare price. He also was kind enough to flash the globle 12.5 ROM as well. On that note, would you know if I'll be able to receive OTA updates? Or will I have to install TWRP RECOVERY and flash the new updates when they come out.? Thanks again for your help brother.

LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
Problem Fixes, thanks to
Ganga -->>> [email protected]> Thanks my Brother, very honest and Knowledgeable with the Xioami Mi 11. I was VERY happy that I did have to remove the back Glass and find the 2 copper prongs like other people were forced to do. Bless.

Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
There's no such thing as "bricked" in 2021... even if you have to flash it via EDL, still not bricked.

LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
I had same situation on Redmi K20 Pro. You'll need to flash it using Mi Flash with a dev account via EDL.
And after flashing global rom, never neeever NEVER lock it back when not having chinese rom on a chinese phone.

You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharing​i reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.

Pikaone41 said:
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharing​i reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Click to expand...
Click to collapse
Thanks you for the EDL firmware. I will download it and just in case I'll ever need it in the future. Plus I'll keep you in mind if ever I need help in the future. Honestly, I never had such a hard time reflashing a device stuck in bootloop. I've flashed so many devices in my life time but never came across such a difficult device to repair. More thank likely I'll be sticking to OnePlus. Much easier.

Question Hard brick

PLEASE HELP!!
I just hard bricked my wife's new Redmi Note 10 Pro!
I bought the Chinese version and got the bootloader unlocked, and then tried to replace it with the global Rom from the official website.
In the process I kept receiving an error: "Mismatching Image and device error ".
I followed a couple of tutorials and this particular seem popular, where I had to delete some lines in the .bat file.
After that the flashing process started but halfway an error appeared again. After several attempts I decided to restart from Fastboot mode, and this was when I realized it had bricked.
Now I can't go to Fastboot mode and I keep getting Vibrations but a dead screen.
PLEASE HELP

swarzB said:
PLEASE HELP!!
I just hard bricked my wife's new Redmi Note 10 Pro!
I bought the Chinese version and got the bootloader unlocked, and then tried to replace it with the global Rom from the official website.
In the process I kept receiving an error: "Mismatching Image and device error ".
I followed a couple of tutorials and this particular seem popular, where I had to delete some lines in the .bat file.
After that the flashing process started but halfway an error appeared again. After several attempts I decided to restart from Fastboot mode, and this was when I realized it had bricked.
Now I can't go to Fastboot mode and I keep getting Vibrations but a dead screen.
PLEASE HELP
Click to expand...
Click to collapse
Download the chinese version
So open google translate and translate" Redmi Note 10 Pro stock firmware China "
copy and paste in google the translated text once you fing one you can download try that one but only flash the partition you need other wise your phone will be in chinese

flairepathos.info said:
Download the chinese version
So open google translate and translate" Redmi Note 10 Pro stock firmware China "
copy and paste in google the translated text once you fing one you can download try that one but only flash the partition you need other wise your phone will be in chinese
Click to expand...
Click to collapse
The problem currently is that I can not boot into Recovery or Fastboot

swarzB said:
The problem currently is that I can not boot into Recovery or Fastboot
Click to expand...
Click to collapse
Check if the oem option in developer locked again

flairepathos.info said:
Check if the oem option in developer locked again
Click to expand...
Click to collapse
I unlocked it before i started

swarzB said:
I unlocked it before i started
Click to expand...
Click to collapse
When you flash things (usually boot.img) it will lock it again
just check and confirm if its still unlocked
plug in your device and do adb reboot bootloader

flairepathos.info said:
When you flash things (usually boot.img) it will lock it again
just check and confirm if its still unlocked
plug in your device and do adb reboot bootloader
Click to expand...
Click to collapse
unfortunately for me my screen wont come on

Usually Its just stuck in engineer/ edl mode
So not to worry but try flashing using sp tools
Put your phone on charger for now
Then
If your phone not getting recognised by pc, unplug and wait for a 6-10 seconds and plugin again or plug in and hold Power+ Volume down or up button till pc recognises it, this will be handy later
here's a guide to flash via SP tools, or you can follow a youtube video to guide you along step by step
How to Flash Xiaomi Redmi Note 10 Pro Android phone - Easy and Working methods [2022]
Flashing Xiaomi Redmi Note 10 Pro Android phone can be difficult task! But not anymore, flash ROMs on your Xiaomi Redmi Note 10 Pro phone easily with this
flashifyit.com

Question Please help! Device stuck on "DM-Verity Corruption" @ Redmi Note 10S Indian Version

I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....

GAGANKXDA said:
I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....Firs
Click to expand...
Click to collapse
GAGANKXDA said:
I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....
Click to expand...
Click to collapse
First of all It had happened with me several times 5 days back. It is the issue of some of the fastboot roms .I also flashed my redmi note 10S to 12.5.5 global because it was too much buggy in miui13 India version.
All you have to do is :-
{If your bootloader is unlocked
you may skip this steps}
1. unlock bootloader instantly from MTK tool using a pc .Watch videos from yt
2. Download 12.5.9 fastboot global rom It is error free { I am on this rom }
Then flash it using miflash tool
Then you may update to miui 13 from OTA itself

Himanshu98010 said:
First of all It had happened with me several times 5 days back. It is the issue of some of the fastboot roms .I also flashed my redmi note 10S to 12.5.5 global because it was too much buggy in miui13 India version.
All you have to do is :-
{If your bootloader is unlocked
you may skip this steps}
1. unlock bootloader instantly from MTK tool using a pc .Watch videos from yt
2. Download 12.5.9 fastboot global rom It is error free { I am on this rom }
Then flash it using miflash tool
Then you may update to miui 13 from OTA itself
Click to expand...
Click to collapse
Thanks but to update 12.5.9 via miflash tool i need to boot phone into fastboot mode which is not happening either..... it keeps restarting with "DM-Verity Corruption" error.. please help if you can..
And, my bootloader is already unlocked..

GAGANKXDA said:
Thanks but to update 12.5.9 via miflash tool i need to boot phone into fastboot mode which is not happening either..... it keeps restarting with "DM-Verity Corruption" error.. please help if you can..
And, my bootloader is already unlocked..
Click to expand...
Click to collapse
LET the phone be completely poweroff
press and hold powerbutton and volume down key simultaneously
Fastboot Logo appears*

Himanshu98010 said:
LET the phone be completely poweroff
press and hold powerbutton and volume down key simultaneously
Fastboot Logo appears*
Click to expand...
Click to collapse
Trust me Himanshu bhai, i have been trying this since yesterday..... it seems to an end to me now.. phone not letting it into fastboot or either into stock recovery..

I think You dont have an unlocked bootloader .
Does it continuosly restarts without any instructions given to it ??
Do you have a PC available ?

And yes one more thing That Dm verity error goes off when you press power button and the system boots to your miui rom ( if your flashing was successful

Himanshu98010 said:
I think You dont have an unlocked bootloader .
Does it continuosly restarts without any instructions given to it ??
Do you have a PC available ?
Click to expand...
Click to collapse
yes, indeed it is unlocked.. it gives a sign on unlocked lock at the top while auto reboot.. please see the attached picture & sorry for the background noise in the video..
I'm on PC itself now, trying to figure out solution....

Himanshu98010 said:
And yes one more thing That Dm verity error goes off when you press power button and the system boots to your miui rom ( if your flashing was successful
Click to expand...
Click to collapse
unfortunately i'm not able to boot into fastboot so i'm out of question for flashing any rom till this sorted out :'(

GAGANKXDA said:
unfortunately i'm not able to boot into fastboot so i'm out of question for flashing any rom till this sorted out :'(
Click to expand...
Click to collapse
Please try this method once and see if it works

Is it charged ??

Himanshu98010 said:
Is it charged ??
GAGANKXDA said:
yes, indeed it is unlocked.. it gives a sign on unlocked lock at the top while auto reboot.. please see the attached picture & sorry for the background noise in the video..
I'm on PC itself now, trying to figure out solution....
Click to expand...
Click to collapse
Press the power button once or twice when the error or The unlocked symbol pops up
Click to expand...
Click to collapse

Himanshu98010 said:
Is it charged ??
Click to expand...
Click to collapse
Come on man it is charged... btw complete message says as follows:
=================
dm-verity corruption
Your device is corrupt.
It can't be trusted and may not work properly.
Press power button to continue.
Or, device will power off in 5s
=================
This is the problem, no matter what i press it reboots & continue to flash this message as shown in previous video, whether or not i press power button..

however, i have observed that PC is deducting phone merely for some seconds when screen goes completely off while auto reboot.... highlighted in picture

You must press and hold power button and volume down quicky as soon as the screen goes off while auto reboot.

My problem was not this fatal . Still I was scared as I was doing it for the first time .