Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Hold power and volume down til reboot into "bootloader" mode, plug usb-c cable to PC, then reflash later stock rom
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
You have to go to the service center.
Hey msobarzoe13, I am using moto g6 and from India. When android p soak test was leaked as everyone out there, I tried it. It was good except for some network issues. So I decided to revert back to the stock firmware. I downloaded the OS and flashed it and faced the same issue. I tried several times but no luck. I was not even able to unlock the bootloader because I didn't turn on OEM unlock under settings. So I took it to the service center. The best part is by installing Beta your warranty is void. So I did it through the service center. They told Moto G6 series is very secured so flashing it with a leaked software is prevented. I don't know why. So don't take a further risk, take it to the service center.
Omar04 said:
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
Click to expand...
Click to collapse
What you mean with "OG firmware" and what if the motorola is totally hardbricked? I mean not able to go to bootloader or recovery or even fastboot because he didnt turn on android debugging oem?
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
If your bootloader is still locked just take it to a moto service centre, I also tried downgrading and took it to service centre they fixed it
I have also hard bricked my moto g6 while updating. There was an OTA update and i started update without noticing my battery percentage. Now i have hard bricked dead moto g6. There is no response at all. Only life in my device is that it is detected as Qualcomm HS-USB QLoader 9008 in pc.
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Jefersonrr said:
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Click to expand...
Click to collapse
Same problem with me also. It may be detected as qualcomm hs-usb qloader 9008 while you connect in pc. If that is the problem than we need blank flash file which is not available right now. Either we have to send our device to service center for motherboard replacement or we need to wait for blank flash file which is not possible to come because these files are sensitive to motorola. another solution is if some one provide me mmcblk0.img of moto g6 than i might be able to boot it from sd card and may revive it again.
My Moto G6 Ali got hardbricked also plzzz help anyone solved it or have blankflash HE
Do anyone got any solution regarding this then plzzz help
:crying::crying::crying::crying::crying::crying:
Or email me at
??
[email protected]
Please help
Related
Hi, i have tried to remove my root and unlocked bootloader as I didnt think they were correctly installed in the first place. Also I wanted to install a new oem update that it keep reminding me of in the background. So now after doing alot of things found in forums and youtube I have come to an end point were the phone just comes to the bootscreen, "your devise has been unlocked and cant be trusted." from here it is just stuck with the "your devise is now booting..." then nothing happens so I realy need help now, otherwise I will have to buy a new phone within the next days.. I cant still get into the twrp and format/wipe data etc, so is it something in here I need to fix then?
Anyone that can please help me out a bit?
Regards Kristoffer
I'm having the same issue. I am unable to flash a custom rom or an official rom. One issue I am having is that I can not relock the bootloader as I get an command not allowed. Please can someone help with this issue.
Thanks
Sent from my SM-G928F using Tapatalk
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Luigi Ra said:
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Click to expand...
Click to collapse
But I cant get into the twrp anymore, only the fastboot and recue mode and the huawei erecovery mode, and in this the wifi just gives me failed to download the package or something like that.... ://
I managed to get in recovery by running the oem unlock. The problem I have is that I am unable to lock the bootloader again.
I really want to get the phone working again. I don't want to have to send the device to a Huawei Service Centre since the bootloader has been unlocked.
I really hope someone can help us all get the device back to stock firmware.
Thanks
How did you get to the recovery mode? I cant get to the twrp anymore, i think i did something wrong and wiped data or formated it so now i can only se bootup screen, or huawei logo or get to fastboot and rescue mode. There it says phone unlocked and frp (or something) in green letters lock....? And also the huawei erecovery which i cant do anything in...
I run fastboot oem unlock and flashed twrp using fastboot.
I have managed to flash update.app, Default_hw.app, Default_normal.app and Default_eu.app using an app called DC Phoenix, but now when the phone boots it goes in to eRecovery and the touchscreen doesn't work. Even when I flash twrp again the touchscreen still doesn't work.
Please can someone advise what to do to get the touchscreen and the other phone back to normal.
Thanks
Were i find a link for step by step rooting my huawei p9 lite. I have company from amateurs pretty good ones. So i cant make mistakes. Thnx for the help...rock the world wild and free whopppaaa
Hello folks,
so a friend of mine is a complete noob and have this problem with his p9 plus.
The phone keeps rebooting itself in an endless loop, i can't access recovery and only when plugged in to the PC i can access fast-boot.
Phone is locked, FRP Lock.
With getvar command i managed to get this info:
rescue_phoneinfo: VIE-L09C113B170
seems that there is no full zip of this rom anywhere just partial ota (found those with firmware finder) but even with that when i try to flash recovery i get command not allowed.
On the fastboot screen of the phone i have this reboot reason AP_S_PANIC
anyone knows a how to get the phone out of this? (i was thinking that maybe unlocking the bootloader could be of any use, but in the request page it's needed the Product_ID and i don't have it. (can't *#*#1357946#*#*)
I don't know if it does work in a locked bootloader.
I have my P9+ for a week and maybe if you download a firmware compatible with your version and try to 'hard' update the phone, using a SD card with a update file on a dload folder and restarting the phone pressing VolUp + VolDown +Pwr, you can restore your friend's phone.
I'm sorry if I didn't help, I am myself stucked trying to rollback my version to MM and have the NFC and the Bluetooth working again...
myself also got this problem..please anyone..
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Well mine works as follows
Turn off device
Hold vol down and power button, this should take to recovery menu
Select recovery - it will take to a no command screen
Hit power and up once.
That's how I hard reset my g9
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Download the rescue software from the official Lenovo page, it will guide you, maybe you can recover your device, use fastboot to try to put it in mode, good luck
Your phone is bootloader bricked, try blankflashing it. It is already in EDL mode since you got the qualcomm HS Usb
Hi, mrsiri. There isn't any blank flashes available as far as I'm aware.
That's too bad. From my understanding the "Qualcomm HS-USB Loader 9008" showing up means your bootloader is corrupted. That's why you can't get into fastboot and nothing shows up on your screen. By applying a blankflash you could reflash your bootloader, but since there isn't any blankflash available yet you'll have to wait for one.
my Motorola G9 Plus has also been bricked and the only vital sign is that when I connect it to PC it shows that a usb device is connected (lsusb command execution result: Qualcomm, Inc. Gobi Wireless Modem (QDL mode) ) and nothing else appears, i.e. the phone screen is off and in black state and it enters neither recovery nor fastboot mode.
can anyone help to recover the device?!
mohammad_d said:
my Motorola G9 Plus also has been bricked and the only vital sign is that when I connect it to PC it shows that a usb device is connected (lsusb command execution result: Qualcomm, Inc. Gobi Wireless Modem (QDL mode) ) and nothing else appears, i.e. the phone screen is off and in black state and it enters neither recovery nor fastboot mode.
can anyone help to recover the device?!
Click to expand...
Click to collapse
It doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
mrsiri said:
It doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
Click to expand...
Click to collapse
Can I use it's warranty in Motorola warranty dealers and revive the device or provide any bootloader from another same device or any other way?
mohammad_d said:
Can I use it's warranty in Motorola warranty dealers and revive the device or provide any bootloader from another same device or any other way?
Click to expand...
Click to collapse
I don't know of any other method than Blankflashing that could revive your phone in this state. Your warranty was voided right after you unlocked your bootloader, so I don't think they would accept fixing it. The Problem is you can't simply reflash another bootloader, because in this state (QCOM EDL) can only be recognized and flashed with Qfil which uses the primary bootloader to flash to the secondary bootloader. This process needs the blankflash which has the files to correctly flash it. Yes the Android has another bootloader that is less user friendly to boot the other bootloader and then your ROM.
mrsiri said:
I don't know of any other method than Blankflashing that could revive your phone in this state. Your warranty was voided right after you unlocked your bootloader, so I don't think they would accept fixing it. The Problem is you can't simply reflash another bootloader, because in this state (QCOM EDL) can only be recognized and flashed with Qfil which uses the primary bootloader to flash to the secondary bootloader. This process needs the blankflash which has the files to correctly flash it. Yes the Android has another bootloader that is less user friendly to boot the other bootloader and then your ROM.
Click to expand...
Click to collapse
Hello guys hope you all are well. I have also same problem with my moto g9 plus. So do have any luck to find blank flash file for Moto g9 plus?
count me in guys...i hard bricked my device too......if anyone finds a solution should ping me here
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Yes same problem my moto g9 plus is Qualcomm edle mode please upload blank flash file
Please send blank flash file moto g9 plus Odessa xt2087-2
Yeah there is no blankflash files I have been able to get. So I just got a new device.
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Same problem Motorola G9 plus Odessa hardbrick bootloader doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
Motorola G9 plus Odessa hardbrick doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
(Moto g9 plus Odessa xt2087-2)
asimali2243 said:
count me in guys...i hard bricked my device too......if anyone finds a solution should ping me here
Click to expand...
Click to collapse
Yes same i waiting for blank flash file Moto g9 plus Odessa xt2087-2 qpas 30 firmware
Not response my problem...?
?
hello guyes my phone is dead any solution
so yeah dsu loader plop No valid system found. cant unlock bootloader, recovery not booting. nothing
I'm in the same, no recovery, no system and bootloader blocked, already tried flashing different stock roms which are supossed to be signed by Moto and nothing works, can't wipe userdata, can't unlock bootloader, can boot imgs. I think the only solution would be to to a blanflash but I can't find a way to boot the device into EDL mode neither, did you find any solution?
Ar-Dinthalion said:
I'm in the same, no recovery, no system and bootloader blocked, already tried flashing different stock roms which are supossed to be signed by Moto and nothing works, can't wipe userdata, can't unlock bootloader, can boot imgs. I think the only solution would be to to a blanflash but I can't find a way to boot the device into EDL mode neither, did you find any solution?
Click to expand...
Click to collapse
[SOLVED] Recover Moto G50 from hardbrick state (stuck in EDL)
Hallo Moto Users😃 Last few days, it was a nightmare to find some ready and working solution on hardbricked Motorola. After 5 or 6 days finally bootloader screen appeared😎 Just to mention - until one week ago I was just and only Samsung user for...
forum.xda-developers.com
Check this out. U may only need to start from booting into edl mode