Hi, XDA members,
I recently rooted my gadget Samsung Galaxy Tab 3 Lite SM-T1100 using ODIN software to flash a custom recovery which is the ClockWorkMod. The flashing went well and after that, I boot to custom recovery to make a flash of the file "android-armeabi-universal-root-signed" and reboot the system. After rebooting, my device has already been rooted. But for a reason I did not understand I tend to restore my device to it's factory default settings thru the tablet settings, after that, it only boot to the custom recovery and did not boot again to homescreen. I know this is because of the deleted OS on my tablet due to factory reset that I've done. Please help me bring back my gadget to life since I already searched for =different kinds of Stock Firmware to recover its deleted OS and bring back to it's original form. Your help will be much appreciated since I really badly need this gadget back to work. I need a step by step instructions and all the links that I'll be needing to bring back my tablet to life again. Thank you very much guys!
Condition: Every time I open my tablet all it does is to flash its name SAMSUNG GALAXY TAB 3 LITE SM-T1100 and after that it will boot to my custom recovery which is ClockWorkMod and there is nothing to do.
What I've done before the incident: I rooted it and the rooting process went well. But after that I preferred making a factory reset and poof! There is the PROBLEM
CRITICAL FILES: No, I don't have any files to be backed up and yes. I did not make a Back up or what they called Nandroid...
This is the original galaxy tab forum. Try the tab 3 forum to get your answers.
Sent from my GT-N5100 using XDA Free mobile app
Related
Hi guys.
I was planning to install CM 7.2 on my Galaxy Ace for quite a long time and decided to do it today. I have rooted my phone and installed CWM on it, following steps described on the forum. I have made some backups with CWM and My Backup Root. Everything was fine, I have turned my phone off and back on without any problems. However, after doing the factory reset and clearing cache partition via CWM I cannot get past the bootloop animation, it keeps showing my network logo and Samsung logo. After about 5 minutes I have pulled the battery out and restored the CWM backup, but it didn't help. Any idea of what to do to bring my phone back to life?
Thanks,
Draggy
I have flashed my phone with the latest Samsung Galaxy Ace firmware using Odin, but it didn't help - instead of O2 logo there is only the Samsung animation now. I really don't know what to do.
Try a FULL Odin package, and make sure your phone model is the exact one of the rom you are flashing (5830/5830i etc)
Sent from my Ace on Apocalypse Rom
After flashing the new software I had to take the battery out and then go to the recovery mode and do the factory reset again. I think I now need to root my phone again and install CWM, as I've got the stock recovery now. Thanks for help.
Draggy28 said:
After flashing the new software I had to take the battery out and then go to the recovery mode and do the factory reset again. I think I now need to root my phone again and install CWM, as I've got the stock recovery now. Thanks for help.
Click to expand...
Click to collapse
Be careful next time
Sent from my GT-S5830 using xda app-developers app
The problem is that I haven't done anything wrong. I followed the steps from the forum and I would have never thought that the bootloop may happen because of factory resetting the phone. Anyway, I'll try and get the CM working tonight. :silly:
Greetings !
Ok, lets start this here
Since i got my new Samsung GALAXY MINI (GT-S5570) i had a bad stock on it, with wi-fi errors, auto restarts, and other problems i was facing with... So i decided to flash and root my phone.
I followed some of the tutorials given by members here on this forum, and i successfully managed to root my phone, and install a new rom onto it !
- I used this rom to flash my Samsung Galaxy Mini (GT-S5570) GINGERSLEEK, was working fine and other, i was satisfied with it, but after some time it got boring and i decided to flash a new rom into the phone. This is where i fcked up... After i found a new rom i waned to flash, i did all the steps i am supposed to do ?
I found this rom VOID ROM and followed his steps how to flash, after i done all of that, and installed the new ROM, my phone didnt want to boot, it got stuck on the " A N D R O I D" boot logo... So after trying to go back to GINGERSLEEK, i couldnt, i installed it, and nothing happens, again stuck on the "ANDROID" boot logo...
So i tried to flash my phone to a stock rom, i had so many problems with ODIN to flash it to stock rom . When i flashed with odin i had a error, it couldnt flash, i was disappointed ... So i used google to find a solution, i was lucky and i landed on some forum where they said i have to flash "arm11boot"... It was kinda weird, why should i do that, but after i did it, everything started to work on ODIN and i could FLASH my phone to the STOCK ROM of Samsung Galaxy Mini!
So i wonder now, since my phone is back to a stock ROM am i able to FLASH it to THIS ROM (VOID) and root it without any problems, and if it is possible if some one could copy/paste me the steps how to flash it and how to root it successfully !
Thank you very much for your help ! :angel:
torQ7u said:
Greetings !
Ok, lets start this here
Since i got my new Samsung GALAXY MINI (GT-S5570) i had a bad stock on it, with wi-fi errors, auto restarts, and other problems i was facing with... So i decided to flash and root my phone.
I followed some of the tutorials given by members here on this forum, and i successfully managed to root my phone, and install a new rom onto it !
- I used this rom to flash my Samsung Galaxy Mini (GT-S5570) GINGERSLEEK, was working fine and other, i was satisfied with it, but after some time it got boring and i decided to flash a new rom into the phone. This is where i fcked up... After i found a new rom i waned to flash, i did all the steps i am supposed to do ?
I found this rom VOID ROM and followed his steps how to flash, after i done all of that, and installed the new ROM, my phone didnt want to boot, it got stuck on the " A N D R O I D" boot logo... So after trying to go back to GINGERSLEEK, i couldnt, i installed it, and nothing happens, again stuck on the "ANDROID" boot logo...
So i tried to flash my phone to a stock rom, i had so many problems with ODIN to flash it to stock rom . When i flashed with odin i had a error, it couldnt flash, i was disappointed ... So i used google to find a solution, i was lucky and i landed on some forum where they said i have to flash "arm11boot"... It was kinda weird, why should i do that, but after i did it, everything started to work on ODIN and i could FLASH my phone to the STOCK ROM of Samsung Galaxy Mini!
So i wonder now, since my phone is back to a stock ROM am i able to FLASH it to THIS ROM (VOID) and root it without any problems, and if it is possible if some one could copy/paste me the steps how to flash it and how to root it successfully !
Thank you very much for your help ! :angel:
Click to expand...
Click to collapse
Follow this:
1. Make sure you have got gingerbread installed on your galaxy mini/pop s5570.
2. Get root.zip for stock gb(search for that root zip here in galaxy mini section) and flash it via stock recovery.
3. Download this file " update-CWM-5.2.0.8-Touch2-squadzone.zip"(again check galaxy mini section for this zip, don't flash any other phone's recovery, otherwise it'll hard brick your phone, be careful in choosing recovery, it has to be tass compatible recovery) and flash it via stock recovery and restart recovery.
4. Make wipes as recommended by void rom thread and install it. You are good to go after that.
Sent from my GT-S5570 using XDA Free mobile app
Venkatesh said:
Follow this:
1. Make sure you have got gingerbread installed on your galaxy mini/pop s5570.
2. Get root.zip for stock gb(search for that root zip here in galaxy mini section) and flash it via stock recovery.
3. Download this file " update-CWM-5.2.0.8-Touch2-squadzone.zip"(again check galaxy mini section for this zip, don't flash any other phone's recovery, otherwise it'll hard brick your phone, be careful in choosing recovery, it has to be tass compatible recovery) and flash it via stock recovery and restart recovery.
4. Make wipes as recommended by void rom thread and install it. You are good to go after that.
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
Apparently i don't have stock recovery on my phone, its not even flashed or rooted, it's just stock rom 2.3.6
if someone could provide me with some links how to flash/root my phone, because i really would like to install that VOID rom.. its looks so awesome !
torQ7u said:
Apparently i don't have stock recovery on my phone, its not even flashed or rooted, it's just stock rom 2.3.6
if someone could provide me with some links how to flash/root my phone, because i really would like to install that VOID rom.. its looks so awesome !
Click to expand...
Click to collapse
Every phone has a default recovery which we call it "stock recovery".
You should look at sticky threads in galaxy mini android development section.
Sent from my GT-S5570 using XDA Free mobile app
Hello. I am completely new to xda and I need help. I recently began tinkering with android. I have a rooted Samsung Galaxy Centura through Tracfone. It was rooted using the poot method with SuperSU running as a system app and running stock rom, no custom recovery. All was well until I tried to install xposed. The installer would crash so I used ES explorer to move the xposed apk into the system apps. I changed the permission to rw r r, rebooted, and am now stuck in a boot loop. I tried going into recovery, factory reset, taking the battery out, still nothing. Could someone please help! I have no knowledge of cwm or odin, etc. and have never flashed anything. PLEASE give a STEP BY STEP guide on how to get back to normal!!! Thanks!
game360 said:
Hello. I am completely new to xda and I need help. I recently began tinkering with android. I have a rooted Samsung Galaxy Centura through Tracfone. It was rooted using the poot method with SuperSU running as a system app and running stock rom, no custom recovery. All was well until I tried to install xposed. The installer would crash so I used ES explorer to move the xposed apk into the system apps. I changed the permission to rw r r, rebooted, and am now stuck in a boot loop. I tried going into recovery, factory reset, taking the battery out, still nothing. Could someone please help! I have no knowledge of cwm or odin, etc. and have never flashed anything. PLEASE give a STEP BY STEP guide on how to get back to normal!!! Thanks!
Click to expand...
Click to collapse
Try to get your hands on the official firmware of your device. The forums specific to your device is a good place to start.
When you installed Xposed it should have created a .zip file on your sdcard called
Xposed-disabler-recovery.zip
Flash it.
EDIT: No custom recovery = do what above poster said.
Sent from my HUAWEI Y536A1 using XDA Free mobile app
Firstly Close the Phone (Plug out battery and Plug in)
And Search Google for "(yourphone) recovery mode"
After You Started Your Phone With Recovery mode Do a Factory Reset
When it finish reboot your phone
Sorry for bad english
Do we keep all content when we flash the recovery?
JazzROM For Samsung Galaxy Tab S2/SM-T713 Nougat 7.0
A custom ROM based on official firmware Samsung Galaxy Tab S2/SM-T713 Nougat 7.0 (XAR- USA version)
[Deodexed, Deknoxed, Rooted, Internal Encryption off, Init.d, Su.d, etc..etc..all good stuff you will find in pretty much every good custom ROMs..]
Nobody is allowed to take stuff from my rom without asking me! Thank you.
A fair warning before you jump on and flash this ROM: Installing this Rom will void warranty. Installing TWRP will trip knox to 0x1! Secure folder will be unusable.
Prerequisites / What you need:
1 - No brainier that flashing custom ROMs requires a custom recovery, we use TWRP 3.1.0-1 - look here @ashyx thread download for your device.
2 - If you are still on official firmware and never rooted, maybe it is time to get into custom recovery! - so get that one going..have question about TWRP, please ask @ashyx thread, not here.
3 - Now that you have fully working TWRP installed, it is good time to do full nandroid backup and save that to your microSD card and your computer (in case all goes wrong, you can restore it)
4 - Keep in mind that we developer always assume you know what you are doing since you are here and interested flashing custom ROMs!
5- Remember that do not set read-only mode system in TWRP
6- Are we good up to this point? if yes, then proceed to installation step!
Installation:
-- Of course, do full nandroid backup!!!!!, dont blame ROM developer if something goes awfully wrong..so do full backup!!
1 - Then, first download JazzROM-SM-T713.NOUGAT.7.0.DEODEX.V1.zip copy it to your tablet's internal sdcard or microSD card.
2 - Reboot in to TWRP, and do Data Format [Wipe]/[FormatData], type "yes", and once it done, go back to main screen
3 - In TWRP main screen, -->Wipe-->Advanced Wipe, and check only; "System", "Data", "Cache", and "Dalvik/Art cache" - do NOT select any other options!, once it done, go back to main screen.
4- In TWRP main screen, select Install, and Select Storage where you saved JazzROM-SM-T713.NOUGAT.7.0.DEODEX.V1.zip in first step above, and select "JazzROM-SM-T713.NOUGAT.7.0.DEODEX.V1.zip" then swipe to confirm flash and wait until it finishes...
5- Reboot to System, don't be alarmed, you may get couple boot-loops (for me it happened 2 times) with SuperSU-v2.82, this is normal.
6- Now, while your tablet is rebooting, go get coffee or read a short book or watch something, it is going to take several minutes (5 to 15 min.)
7- Once reboots, go thru the setup of tablet as you normally do.
8- If all goes fine, you should be running stock base deodexed Nougat 7.0 ROM!
Download Links:
====>DOWNLOAD: JazzROM-SM-T713 V1.0
reserved
just in case
Nice, will try it.
Looking forward to test this as soon as I get a soft bricked Tab S2 that I will try to resuscitate.
Don't pass the bootlogo
Same here, stuck on bootlogo.
Due to complaints about boot logo freeze i haven't tried to test the rom yet. Any feedback from the developer?
RIP OP
JazzROM saved the day
My Galaxy Tab S2 SM-713 Nougat developed a FRP
---------- Post added at 07:36 PM ---------- Previous post was at 07:26 PM ----------
My Galaxy Tab S2 SM-713 Nougat developed a FRP block after rooting which bricked it. I wanted to reflash the original rom but unfortunately I never copied the id number from the tablet
After lots of searching, I found this "generic" JazzRom and downloaded the zip file which I then converted to a tar.md5 file. I then used ODIN to flash my tablet (fortunately the upload mode wasn't bricked).
Flashing proceeded normally and when done, the tablet booted fairly quickly back and everything looked as if it never was bricked.
I know I should probably do a full factory reset ad restore all my apps from my backup but everything is working so smoothly so I'll do that tomorrow.
Thanks for the excellent job.
cannot open the androidfilehost
My Samsung Tab S2 (8.0) SM-T713 Running 7.0 downgrade to 6.0.1
Hi guys! Newbie here.
Just want to ask if it is possible to downgrade my tablet that is running on OS 7.0 to Stock rom or on atleast OS 6.0?
The OS 7.0 was updated using OTA and it really drains my battery just want to roll back again on the stock or on the previous version.
Please help.
Thank you so much.
Help ROM samsung tab s2 8.0 32gb SM-T713
Hi, I need your help.
I would like a free rom for my tablet samsung tab s2 8.0 SM-T713 2015.
I've already put several rom's but none worked.
I need your help urgently, please.
Thanks
Hey there I just bought a Galaxy Tab A8 and have no experience. I tried to do this myself but didn't read replies saying to only patch my Boot.img in odin. Now I'm in a boot loop.
I used a guide that had all the original files already laid out for me. But it said to do the BL. AP, and CSC files on odin. I was only supposed to do AP because it has an empty file that the SM-t200 doesn't like.
Then I used this to try to fix it straight after getting stuck in the boot loop
[RECOVERY][UNOFFICIAL] TWRP 3.7.0 for 2021 Galaxy Tab A8 10.5 [SM-X200]
Notes: What's posted below is a work in progress, but it should suffice to unblock efforts to build custom ROMs for this impressive tablet. This is unofficial and unsupported, so the usual caveats apply. Since we don't flash the bootloader, you...
forum.xda-developers.com
I'm currently stuck at the Teamwin menu on my tablet after power and hold volume up and plugging in tablet.
Is there a way to return to stock and do everything over again? I just bought this yesterday and don't want to have a bricked Tab A8
If you just purchased the tab then yeah do factory reset since you don't have to worry about trying to save any of the data. Just be extra careful and go over the steps again until you are ready to go for a second time.
kevinco1 said:
If you just purchased the tab then yeah do factory reset since you don't have to worry about trying to save any of the data. Just be extra careful and go over the steps again until you are ready to go for a second time.
Click to expand...
Click to collapse
I did factory reset, and now it doesn't boot loop, now its just on the team win recovery project with the 8 options : Install Wipe Backup Restore Moutn Settings Advanced and Reboot. what do I do now? Because I don't know how to start over from 0 if it wont let me go back to 0
zeniey said:
I did factory reset, and now it doesn't boot loop, now its just on the team win recovery project with the 8 options : Install Wipe Backup Restore Moutn Settings Advanced and Reboot. what do I do now? Because I don't know how to start over from 0 if it wont let me go back to 0
Click to expand...
Click to collapse
What is your end goal? Do you want to install a custom ROM or are you just trying to get root with the stock ROM? You obviously have TWRP working so you could install a custom ROM from there. If you want to go back to a stock ROM, there should be an option in TWRP to reboot to download mode.