Related
Ok guys, so I was trying to flash the software on my Sprint HTC One with a custom one, while drunk. Needless to say it didn't work. I suspect that chrome f*cked up downloading the rom, because it was only 800mb, and should have been about 1gb. Now, the phone isn't working. When I try to turn it on it shows the htc logo and then boots up in fastboot. Fastboot still receives cmd commands, but I still havent found a way to flash an RUU on it. Tryed with twrp as a recovery- cant mount to computer. Tryed sending the file to phone through cmd- some error about not working radio came through. I'm cutting corners explayning all the methods I tryed to make it work, but there were a lot of them and I dont remember all. I have flashed the boot and the recovery back to the stock ones, bootloader IS unlocked. Phone vertion (as shown in the bootloader screen):
***TAMPERED***
***UNLOCKED***
M7_WLS PVT SHIP S-ON RH
HBOOT- 1.44.0000
OpenDSP-v31.120.274.0617
eMMC- boot
Jul 5 2013,17:19:22:-1
My question is how do I return it to stock condition (or unlocked to all networks if possible)? Please, I've been trying to fix it on my own for over a week now, and am getting desperate. If possible please give links to step-by-step tutorials and/or files I'll need. Thank you in advance.
PS.: Also, for some reason my computer does fails to install the HTC MTP device driver. Could it be from that, and if it is- will using a different computer solve the problem (tryed a million times to fix that as well- no luck)?
drobalqk said:
Ok guys, so I was trying to flash the software on my Sprint HTC One with a custom one, while drunk. Needless to say it didn't work. I suspect that chrome f*cked up downloading the rom, because it was only 800mb, and should have been about 1gb. Now, the phone isn't working. When I try to turn it on it shows the htc logo and then boots up in fastboot. Fastboot still receives cmd commands, but I still havent found a way to flash an RUU on it. Tryed with twrp as a recovery- cant mount to computer. Tryed sending the file to phone through cmd- some error about not working radio came through. I'm cutting corners explayning all the methods I tryed to make it work, but there were a lot of them and I dont remember all. I have flashed the boot and the recovery back to the stock ones, bootloader IS unlocked. Phone vertion (as shown in the bootloader screen):
***TAMPERED***
***UNLOCKED***
M7_WLS PVT SHIP S-ON RH
HBOOT- 1.44.0000
OpenDSP-v31.120.274.0617
eMMC- boot
Jul 5 2013,17:19:22:-1
My question is how do I return it to stock condition (or unlocked to all networks if possible)? Please, I've been trying to fix it on my own for over a week now, and am getting desperate. If possible please give links to step-by-step tutorials and/or files I'll need. Thank you in advance.
Click to expand...
Click to collapse
It sounds like you have the same problem that a lot of people are getting into around here, myself included. You tried to flash a non-cdma compatible rom onto your phone.
There are numerous postings about how to fix this, however, it depends on the condition of your phone which step you take.
If you have recovery installed and you have access to recovery you will take different steps than if you only have access to fastboot.
You need to have a recovery installed and you need to relock your phone to fastboot ruu. Once that is done you basically start from scratch and unlick your phone again and then you can reinstall the recovery and then flash the correct cdma compatible roms.
MrFixit007 said:
It sounds like you have the same problem that a lot of people are getting into around here, myself included. You tried to flash a non-cdma compatible rom onto your phone.
There are numerous postings about how to fix this, however, it depends on the condition of your phone which step you take.
If you have recovery installed and you have access to recovery you will take different steps than if you only have access to fastboot.
You need to have a recovery installed and you need to relock your phone to fastboot ruu. Once that is done you basically start from scratch and unlick your phone again and then you can reinstall the recovery and then flash the correct cdma compatible roms.
Click to expand...
Click to collapse
The recovery I can install in a matter of seconds, same with relocking. I have the lastest vertions on both TWRP and Clockwork. Which one do I install and how do I proceed after? Thank you
drobalqk said:
The recovery I can install in a matter of seconds, same with relocking. I have the lastest vertions on both TWRP and Clockwork. Which one do I install and how do I proceed after? Thank you
Click to expand...
Click to collapse
do you have adb access? or only fastboot access?
MrFixit007 said:
do you have adb access? or only fastboot access?
Click to expand...
Click to collapse
adb- Im not sure. How do I check? Fastboot- I think so. It accepts my cmd commands for flashing recovery and rom (although when I tryed to flash rom it failed).
drobalqk said:
adb- Im not sure. How do I check? Fastboot- I think so. It accepts my cmd commands for flashing recovery and rom (although when I tryed to flash rom it failed).
Click to expand...
Click to collapse
In your command window in the same directory you run fastboot from, you should be able to run adb.
The easiest way to check is to type: adb devices
this should return a value if you are booted into recovery.
it will give you nothing if you aren't in recovery.
if you cannot get into recovery then you need to make sure your phone is unlocked and then fastboot a recovery onto your phone.
MrFixit007 said:
In your command window in the same directory you run fastboot from, you should be able to run adb.
The easiest way to check is to type: adb devices
this should return a value if you are booted into recovery.
it will give you nothing if you aren't in recovery.
if you cannot get into recovery then you need to make sure your phone is unlocked and then fastboot a recovery onto your phone.
Click to expand...
Click to collapse
I currently have the stock recovery flashed on it. Is that one going to work or should I flash TWRP/ Clockwork?
drobalqk said:
I currently have the stock recovery flashed on it. Is that one going to work or should I flash TWRP/ Clockwork?
Click to expand...
Click to collapse
as long as you can boot into recovery, it should work. i personally favor twrp, but any recovery should work.
try out some adb commands and see.
adb sevices
adb shell
if you get anywhere with those while booted into recovery you should be ok.
MrFixit007 said:
as long as you can boot into recovery, it should work. i personally favor twrp, but any recovery should work.
try out some adb commands and see.
adb sevices
adb shell
if you get anywhere with those while booted into recovery you should be ok.
Click to expand...
Click to collapse
adb devices returns no values
adb services returns big list of commands
adb shell returns error device not found.
I'm into TWRP v.2.6.1.0 start screen.
drobalqk said:
adb devices returns no values
adb services returns big list of commands
adb shell returns error device not found.
I'm into TWRP v.2.6.1.0 start screen.
Click to expand...
Click to collapse
did those adb errors or no devices found occur while your phone was showing the twrp start screen?
if yes, then we need to reboot into the bootloader-- to fastboot.
if no then try adb shell again while showing the twrp start screen.
MrFixit007 said:
did those adb errors or no devices found occur while your phone was showing the twrp start screen?
if yes, then we need to reboot into the bootloader-- to fastboot.
if no then try adb shell again while showing the twrp start screen.
Click to expand...
Click to collapse
Yes, I was IN TWRP recovery home screen. I'll try the commands in fastboot as soon as I come back from work. Thank you for the time you spend trying to help me, I do very much apreciate it.
drobalqk said:
Yes, I was IN TWRP recovery home screen. I'll try the commands in fastboot as soon as I come back from work. Thank you for the time you spend trying to help me, I do very much apreciate it.
Click to expand...
Click to collapse
It seems like you need to fastboot flash recovery onto your phone again.
Here are the steps as I think they should work to get you back up and running.
**Make sure your phone is unlocked. (it should display ***UNLOCKED*** at the top of the bootloader screen)
if you ARE unlocked do the following(+++see below if you are NOT unlocked+++)
1. from bootloader select fastboot - connect phone to computer. fastboot should change to fastboot usb when you have a good connection.
on your computer:
2. open a command window and navigate to the folder where adb and fastboot are located
3. type in "fastboot flash recovery xxxxxxxx.zip" where xxxxxxxx.zip is the name of recovery zip file without quotes. Make sure you download a good copy appropriate for your phone. I would use this one: http://techerrata.com/file/twrp2/m7wls/openrecovery-twrp-2.6.1.0-m7wls.img
4. type fastboot reboot
on your phone:
5. once it is rebooted and in bootloader select recovery and boot into recovery.
on your computer:
6. once your phone shows recovery main screen then typeat the command prompt: adb shell
7. no matter what the prompt looks like type: echo "1.29.651.10" | dd of=/dev/block/mmcblk0p19 bs=1 seek=160
8. no matter if it errors or not type: adb reboot bootloader
9. type: fastboot oem lock
10. type: fastboot oem rebootRUU
11. type fastboot flash zip xxxxxxxxxxxxx.zip where xxxxxxxxxxxxx.zip is the name of the ruu.zip file. i would use this one: http://www.androidfilehost.com/?fid=22926241640219526
12 reboot your phone once that is successful!! If you get the "flush image again immideately" error message then repeat step 11. then reboot your phone.
you should now be running a stock sprint phone.
you can now unlock your phone again and reinstall a recovery.
to unlock your phone the second time:
13. boot your phone into bootloader then go to fastboot - make sure the phone is connected to the computer
14. on your computer type in: fastboot flash unlocktoken Unlock_code.bin
15. on your phone select unlock with volume rocker and press power once unlock is selected
16. on computer type: fastboot flash recovery xxxxxxxxx.zip where xxxxxxxxxx.zip is the same recovery zip file we used above in step 3
17. reboot your phone and you are now unlocked and you have a custom recovery installed and you can download a CDMA compatible rom to your phone and install it with the recovery like normal. or you can continue to run stock.
MAKE SURE YOU ONLY DOWNLOAD CDMA COMPATIBLE ROMS FROM THE SPRINT HTC ONE FORUMS.
enjoii!!
+++if you are NOT unlocked+++
try the following:
step 13
step 14
step 15
step 16
step 4
step 5
step 6-17
make sure you complete all the way through 17 after you do step 6. good luck and let me know what your results are.
MrFixit007 said:
It seems like you need to fastboot flash recovery onto your phone again.
Here are the steps as I think they should work to get you back up and running.
**Make sure your phone is unlocked. (it should display ***UNLOCKED*** at the top of the bootloader screen)
if you ARE unlocked do the following(+++see below if you are NOT unlocked+++)
1. from bootloader select fastboot - connect phone to computer. fastboot should change to fastboot usb when you have a good connection.
on your computer:
2. open a command window and navigate to the folder where adb and fastboot are located
3. type in "fastboot flash recovery xxxxxxxx.zip" where xxxxxxxx.zip is the name of recovery zip file without quotes. Make sure you download a good copy appropriate for your phone. I would use this one: http://techerrata.com/file/twrp2/m7wls/openrecovery-twrp-2.6.1.0-m7wls.img
4. type fastboot reboot
on your phone:
5. once it is rebooted and in bootloader select recovery and boot into recovery.
on your computer:
6. once your phone shows recovery main screen then typeat the command prompt: adb shell
7. no matter what the prompt looks like type: echo "1.29.651.10" | dd of=/dev/block/mmcblk0p19 bs=1 seek=160
8. no matter if it errors or not type: adb reboot bootloader
9. type: fastboot oem lock
10. type: fastboot oem rebootRUU
11. type fastboot flash zip xxxxxxxxxxxxx.zip where xxxxxxxxxxxxx.zip is the name of the ruu.zip file. i would use this one: http://www.androidfilehost.com/?fid=22926241640219526
12 reboot your phone once that is successful!! If you get the "flush image again immideately" error message then repeat step 11. then reboot your phone.
you should now be running a stock sprint phone.
you can now unlock your phone again and reinstall a recovery.
to unlock your phone the second time:
13. boot your phone into bootloader then go to fastboot - make sure the phone is connected to the computer
14. on your computer type in: fastboot flash unlocktoken Unlock_code.bin
15. on your phone select unlock with volume rocker and press power once unlock is selected
16. on computer type: fastboot flash recovery xxxxxxxxx.zip where xxxxxxxxxx.zip is the same recovery zip file we used above in step 3
17. reboot your phone and you are now unlocked and you have a custom recovery installed and you can download a CDMA compatible rom to your phone and install it with the recovery like normal. or you can continue to run stock.
MAKE SURE YOU ONLY DOWNLOAD CDMA COMPATIBLE ROMS FROM THE SPRINT HTC ONE FORUMS.
enjoii!!
+++if you are NOT unlocked+++
try the following:
step 13
step 14
step 15
step 16
step 4
step 5
step 6-17
make sure you complete all the way through 17 after you do step 6. good luck and let me know what your results are.
Click to expand...
Click to collapse
Nope, adb still doesn't work. Could it be something wrong with the drivers my computer installs? Because when I'm in recovery my computer detects the device in "Other Devices" as "M7WLS", and I don't have a driver for that and neither does microsoft update. Any suggestions?
drobalqk said:
Nope, adb still doesn't work. Could it be something wrong with the drivers my computer installs? Because when I'm in recovery my computer detects the device in "Other Devices" as "M7WLS", and I don't have a driver for that and neither does microsoft update. Any suggestions?
Click to expand...
Click to collapse
Did you install HTC Sync or did you install the naked drivers from here?
Otherwise, where in the process did you get stopped?
EDIT: You can always PM me your teamviewer info and I can work on it.
I flashed an OTA update from this thread, http://forum.xda-developers.com/showthread.php?t=2368907, using CWTM and now my phone just sits at the HTC quite brilliant logo. I can access the bootloader but I can't get into recovery. Tried reflashing recovery to no avail. I'd like to know what I did wrong and how to fix it so if I screw up in the future I won't have to come here. Help is much appreciated and thanks in advanced.
xXMichelleXx said:
I flashed an OTA update from this thread, http://forum.xda-developers.com/showthread.php?t=2368907, using CWTM and now my phone just sits at the HTC quite brilliant logo. I can access the bootloader but I can get into recovery. Tried reflashing recovery to no avail. I'd like to know what I did wrong and how to fix it so if I screw up in the future I won't have to come here. Help is much appreciated and thanks in advanced.
Click to expand...
Click to collapse
Were you already s-off before you flashed the OTA? What rom were you using prior to the flash?
I'm guessing you will need to go back to 1.29 ruu to go back to stock before you continue on.
What was your reason for flashing the 1.31 OTA?
Yes I was s-off, I had the stock rom, I was experiencing some weird issues with any rom I was using and it continued when I restored my nan so I thought maybe upgrading to the latest OTA would resolve them.
xXMichelleXx said:
Yes I was s-off, I had the stock rom, I was experiencing some weird issues with any rom I was using and it continued when I restored my nan so I thought maybe upgrading to the latest OTA would resolve them.
Click to expand...
Click to collapse
Without knowing what you have done since you unlocked your phone, it is real hard to say what caused the weirdness. The only way, as far as I know, for you to get back up and running is:
to access fastboot,
make sure your phone is unlocked,
flash a recovery,
boot into the recovery,
run adb commands to set your ruu to 1.29
fastboot lock your phone again
run the RUU
reboot
unlock your phone again
reinstall a recovery
keep stock rom or flash a CDMA rom - one from this sprint htc one forum only!
That should set you up again and get you working.
I'm sorry i can't explain why things went wonky... it all really depends.
I already tried to reflash my recovery before I originally posted, all it does is say its going to recovery then it reboots. Without access to recovery IDK if I can RUU.
I was able to get into recovery but when I tried to install the RUU and it says it was good but when I reboot it is still just sitting at the HTC logo.
xXMichelleXx said:
I was able to get into recovery but when I tried to install the RUU and it says it was good but when I reboot it is still just sitting at the HTC logo.
Click to expand...
Click to collapse
I will provide you with some steps to take, however; with out seeing things hands on I am just guessing. I am willing to use teamviewer to help you out this evening if you cannot get this working.
Here are the steps as I think they should work to get you back up and running.
**Make sure your phone is unlocked. (it should display ***UNLOCKED*** at the top of the bootloader screen)
if you ARE unlocked do the following: (+++see below if you are NOT unlocked+++)
1. from bootloader select fastboot - connect phone to computer. fastboot should change to fastboot usb when you have a good connection.
on your computer:
2. open a command window and navigate to the folder where adb and fastboot are located
3. type in "fastboot flash recovery xxxxxxxx.zip" where xxxxxxxx.zip is the name of recovery zip file without quotes. Make sure you download a good copy appropriate for your phone. I would use this one: http://techerrata.com/file/twrp2/m7w....1.0-m7wls.img
4. type fastboot reboot
on your phone:
5. once it is rebooted and in bootloader select recovery and boot into recovery.
on your computer:
6. once your phone shows recovery main screen, then on your computer at the command prompt type: adb shell
7. no matter what the resulting prompt looks like type: echo "1.29.651.10" | dd of=/dev/block/mmcblk0p19 bs=1 seek=160
8. no matter if it errors or not type: adb reboot bootloader
9. type: fastboot oem lock
10. type: fastboot oem rebootRUU
11. type fastboot flash zip xxxxxxxxxxxxx.zip where xxxxxxxxxxxxx.zip is the name of the ruu.zip file. i would use this one: http://www.androidfilehost.com/?fid=22926241640219526
12 reboot your phone once that is successful!! If you get the "flush image again immideately" error message then repeat step 11. then reboot your phone.
you should now be running a stock sprint phone.
you can now unlock your phone again and reinstall a recovery.
to unlock your phone the second time:
13. boot your phone into bootloader then go to fastboot - make sure the phone is connected to the computer
14. on your computer type in: fastboot flash unlocktoken Unlock_code.bin - (if you get an error or this doesn't work go to HTC DEV to unlock again once you are unlocked make sure you are on the bootloader>>fastboot screen with fastboot usb showing then go to step 16).
15. on your phone select unlock with volume rocker and press power once unlock is selected
16. on computer type: fastboot flash recovery xxxxxxxxx.zip where xxxxxxxxxx.zip is the same recovery zip file we used above in step 3
17. reboot your phone and you are now unlocked and you have a custom recovery installed and you can download a CDMA compatible rom to your phone and install it with the recovery like normal. or you can continue to run stock.
MAKE SURE YOU ONLY DOWNLOAD CDMA COMPATIBLE ROMS FROM THE SPRINT HTC ONE FORUMS.
enjoii!!
+++if you are NOT unlocked+++
try the following:
step 13
step 14
step 15
step 16
step 4
step 5
step 6-17
make sure you complete all the way through 17 after you do step 6. good luck and let me know what your results are.
Again, if this does not work for you, then I am happy to teamviewer with you to fix your problem.
MrFixit007 said:
I will provide you with some steps to take, however; with out seeing things hands on I am just guessing. I am willing to use teamviewer to help you out this evening if you cannot get this working.
Here are the steps as I think they should work to get you back up and running.
**Make sure your phone is unlocked. (it should display ***UNLOCKED*** at the top of the bootloader screen)
if you ARE unlocked do the following: (+++see below if you are NOT unlocked+++)
1. from bootloader select fastboot - connect phone to computer. fastboot should change to fastboot usb when you have a good connection.
on your computer:
2. open a command window and navigate to the folder where adb and fastboot are located
3. type in "fastboot flash recovery xxxxxxxx.zip" where xxxxxxxx.zip is the name of recovery zip file without quotes. Make sure you download a good copy appropriate for your phone.
4. type fastboot reboot
on your phone:
5. once it is rebooted and in bootloader select recovery and boot into recovery.
on your computer:
6. once your phone shows recovery main screen, then on your computer at the command prompt type: adb shell
7. no matter what the resulting prompt looks like type: echo "1.29.651.10" | dd of=/dev/block/mmcblk0p19 bs=1 seek=160
8. no matter if it errors or not type: adb reboot bootloader
9. type: fastboot oem lock
10. type: fastboot oem rebootRUU
11. type fastboot flash zip xxxxxxxxxxxxx.zip where xxxxxxxxxxxxx.zip is the name of the ruu.zip file.
12 reboot your phone once that is successful!! If you get the "flush image again immideately" error message then repeat step 11. then reboot your phone.
you should now be running a stock sprint phone.
you can now unlock your phone again and reinstall a recovery.
to unlock your phone the second time:
13. boot your phone into bootloader then go to fastboot - make sure the phone is connected to the computer
14. on your computer type in: fastboot flash unlocktoken Unlock_code.bin
15. on your phone select unlock with volume rocker and press power once unlock is selected
16. on computer type: fastboot flash recovery xxxxxxxxx.zip where xxxxxxxxxx.zip is the same recovery zip file we used above in step 3
17. reboot your phone and you are now unlocked and you have a custom recovery installed and you can download a CDMA compatible rom to your phone and install it with the recovery like normal. or you can continue to run stock.
MAKE SURE YOU ONLY DOWNLOAD CDMA COMPATIBLE ROMS FROM THE SPRINT HTC ONE FORUMS.
enjoii!!
+++if you are NOT unlocked+++
try the following:
step 13
step 14
step 15
step 16
step 4
step 5
step 6-17
make sure you complete all the way through 17 after you do step 6. good luck and let me know what your results are.
Again, if this does not work for you, then I am happy to teamviewer with you to fix your problem.
Click to expand...
Click to collapse
Thanks MrFixit for the help, I was able to RUU and am now in the clear. What do you think happened when I tried to install the OTA zip?
xXMichelleXx said:
Thanks MrFixit for the help, I was able to RUU and am now in the clear. What do you think happened when I tried to install the OTA zip?
Click to expand...
Click to collapse
The only thing I can think of is that it might have been a bad download. Did you check the md5?
xXMichelleXx said:
Thanks MrFixit for the help, I was able to RUU and am now in the clear. What do you think happened when I tried to install the OTA zip?
Click to expand...
Click to collapse
Instuctions from the link you supplied
OTA Package (Not flashable in TWRP):
Install stock recovery, make sure system is completely stock, and then install off of phone storage in stock android recovery
Click to expand...
Click to collapse
bigdaddy619 said:
Instuctions from the link you supplied
Click to expand...
Click to collapse
or that....
Okay, first thing first. (INFO ON PHONE) I have a HTC One (M7wls) Sprint 36GB phone. Phone is ROOTED.
bootloader:
*** TAMPERED ***
*** UNLOCKED ***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.55.0000
OpenDSP-v32.120.274.0909
OS-3.05.651.6
eMMC boot 2048MB
What can I access:
Fastboot
ADB Sideload
Recovery - I am using custom recovery - openrecovery-twrp-2.6.3.0-m7wls
Now the problem is:
When I install a ROM. Every ROM that I use didn't fully complete installing. When it boot up, can't access home screen, like i can't even do nothing, If I'm not making any sense what I'm trying, basically I don't have no OS-install. And when I install a ROM and do the ADB sideload and install em I just can't get to the home screen , farthest I can go is the lockscreen, but then that don't even act right, as in either it don't want to slide up (by the way my screen work and digitizer) or its blank/black and I can even slide it up, or as i should say froze for about few sec, AND when i can slide up the lockscreen it goes to the white HTC logo screen and stays there about 45-60sec and Reboot over and over, until i go into either recovery or bootloader and power it down.
ROMs that I've downloaded and install but don't completely works:
- Android_Revolution_HD-One_51.0
- One_4.19.401.8_odexed
- Sprint_HTC_One_1.29.651.10_Stock_Odexed_05.17.13
- Sprint_HTC_One_Stock_Rooted_Odexed_3.05.651.6
- viperROM_One_v1.0.4
What I'm saying is that, for example of What I do to install:
-Boot in Recovery
-Format Data (so i can mount data)
-Erase cache
-Reboot recovery (so the updating partition data can refresh)
-Access ADB Sideload
-Install a ROM (once complete) i reboot the phone
-After all the boot up LOGOs, WHEN I get to the lockscreen it either , 1. don't want to slide up, 2. when do slide up goes to white HTC logo screen get stays about 60sec, then Reboot itself , and 3. Just done want to boot up
Also have Tried RUUs: and Yes I unzip to run the Ruu.exe
- Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip
- Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
Also and Yes I re-lock my bootloader to run the RUU , still doesn't happen
I'm not sure which one have this problem, but one of em, Do go through the process and once I get to the part to update Image (I realized my phone image is newer than the RUU image) so i proceed anyways, then it comes to a screen where it say ERROR find the latest Update for RUU. THE second one of em , once i run the program and pop-up screen comes where you accept the terms & conditions, once I do accept it; It closes OUT by itself.
I'VE DONE THE BEST I CAN DO , and I'm very frustrated right now. I've look and look and research, But nothing solve my problem, and I APOLOGIZE FOR THIS LONG ARTICLE/QUESTION. But I'm asking for anyone help who can help me get back this phone back on its feet and I will very appreciate for your help !
P.S. I can't get S-OFF , I want to use my AT&T sim card in it.
ilovetechnology123 said:
Okay, first thing first. (INFO ON PHONE) I have a HTC One (M7wls) Sprint 36GB phone. Phone is ROOTED.
bootloader:
*** TAMPERED ***
*** UNLOCKED ***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.55.0000
OpenDSP-v32.120.274.0909
OS-3.05.651.6
eMMC boot 2048MB
What can I access:
Fastboot
ADB Sideload
Recovery - I am using custom recovery - openrecovery-twrp-2.6.3.0-m7wls
Now the problem is:
When I install a ROM. Every ROM that I use didn't fully complete installing. When it boot up, can't access home screen, like i can't even do nothing, If I'm not making any sense what I'm trying, basically I don't have no OS-install. And when I install a ROM and do the ADB sideload and install em I just can't get to the home screen , farthest I can go is the lockscreen, but then that don't even act right, as in either it don't want to slide up (by the way my screen work and digitizer) or its blank/black and I can even slide it up, or as i should say froze for about few sec, AND when i can slide up the lockscreen it goes to the white HTC logo screen and stays there about 45-60sec and Reboot over and over, until i go into either recovery or bootloader and power it down.
ROMs that I've downloaded and install but don't completely works:
- Android_Revolution_HD-One_51.0
- One_4.19.401.8_odexed
- Sprint_HTC_One_1.29.651.10_Stock_Odexed_05.17.13
- Sprint_HTC_One_Stock_Rooted_Odexed_3.05.651.6
- viperROM_One_v1.0.4
What I'm saying is that, for example of What I do to install:
-Boot in Recovery
-Format Data (so i can mount data)
-Erase cache
-Reboot recovery (so the updating partition data can refresh)
-Access ADB Sideload
-Install a ROM (once complete) i reboot the phone
-After all the boot up LOGOs, WHEN I get to the lockscreen it either , 1. don't want to slide up, 2. when do slide up goes to white HTC logo screen get stays about 60sec, then Reboot itself , and 3. Just done want to boot up
Also have Tried RUUs: and Yes I unzip to run the Ruu.exe
- Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip
- Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
Also and Yes I re-lock my bootloader to run the RUU , still doesn't happen
I'm not sure which one have this problem, but one of em, Do go through the process and once I get to the part to update Image (I realized my phone image is newer than the RUU image) so i proceed anyways, then it comes to a screen where it say ERROR find the latest Update for RUU. THE second one of em , once i run the program and pop-up screen comes where you accept the terms & conditions, once I do accept it; It closes OUT by itself.
I'VE DONE THE BEST I CAN DO , and I'm very frustrated right now. I've look and look and research, But nothing solve my problem, and I APOLOGIZE FOR THIS LONG ARTICLE/QUESTION. But I'm asking for anyone help who can help me get back this phone back on its feet and I will very appreciate for your help !
P.S. I can't get S-OFF , I want to use my AT&T sim card in it.
Click to expand...
Click to collapse
I had a similar problem. Turned out to be a firmware issue.
Boot into fastboot and connect to your computer.
run "fastboot getvar all"
See what firmware you are running.
Pull the firmware from post #3 on Bad Boyz thread
http://forum.xda-developers.com/showthread.php?t=2635051
and run.. the flash is there twice, make sure and do it twice.. it's not a typo.
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Fastboot flash zip firmware.zip
Fastboot reboot-bootloader
If you still have trouble, try flashing an older firmware from here..
http://forum.xda-developers.com/showthread.php?t=2503646
In my situation, I flashed to 3.05.651.6 and it would boot, but once I connected to the PC and tried to access the storage on the phone, it would reboot the phone.
Flashing to 4.06.651.4 fixed everything.
Look HERE for the 3.05.651.6 RUU or you can go thru the steps to fix your phone.
From now on stay in the Sprint section to find roms
Puff1911 said:
I had a similar problem. Turned out to be a firmware issue.
Boot into fastboot and connect to your computer.
run "fastboot getvar all"
See what firmware you are running.
Pull the firmware from post #3 on Bad Boyz thread
http://forum.xda-developers.com/showthread.php?t=2635051
and run.. the flash is there twice, make sure and do it twice.. it's not a typo.
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Fastboot flash zip firmware.zip
Fastboot reboot-bootloader
If you still have trouble, try flashing an older firmware from here..
http://forum.xda-developers.com/showthread.php?t=2503646
In my situation, I flashed to 3.05.651.6 and it would boot, but once I connected to the PC and tried to access the storage on the phone, it would reboot the phone.
Flashing to 4.06.651.4 fixed everything.
Click to expand...
Click to collapse
Do I need a RUU
Puff1911 said:
I had a similar problem. Turned out to be a firmware issue.
Boot into fastboot and connect to your computer.
run "fastboot getvar all"
See what firmware you are running.
Pull the firmware from post #3 on Bad Boyz thread
http://forum.xda-developers.com/showthread.php?t=2635051
and run.. the flash is there twice, make sure and do it twice.. it's not a typo.
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Fastboot flash zip firmware.zip
Fastboot reboot-bootloader
If you still have trouble, try flashing an older firmware from here..
http://forum.xda-developers.com/showthread.php?t=2503646
In my situation, I flashed to 3.05.651.6 and it would boot, but once I connected to the PC and tried to access the storage on the phone, it would reboot the phone.
Flashing to 4.06.651.4 fixed everything.
Click to expand...
Click to collapse
When doing the fastboot commands, it gives me error twice when doing the firmware and YES I renamed it to "firmware.zip"
gives me error message saying "cannot open" and also re-type in command again , same error
hmm.. let me try to duplicate my error later today on one of my test phones and i'll get back to you.
What ROM are you trying to install?
ilovetechnology123 said:
When doing the fastboot commands, it gives me error twice when doing the firmware and YES I renamed it to "firmware.zip"
gives me error message saying "cannot open" and also re-type in command again , same error
Click to expand...
Click to collapse
Make sure it's firmware.zip and not firmware.zip.zip
Window hides extentions as least on my machine it does.
So rename it just firmware and see if that helps
BD619 said:
Make sure it's firmware.zip and not firmware.zip.zip
Window hides extentions as least on my machine it does.
So rename it just firmware and see if that helps
Click to expand...
Click to collapse
That was my mistake, but rename it to "firmware" . now its working. Phone is back up on its feet. lol.
Just want to say thank you for your support and help. Phone is flawless, Thanks you so much again.
HAVE A BLESSED DAY !
I did the same thing by accident. Flashed the old firmware instead of the new by accident and then kept trying to update with the same problems. Since only the first and last digits of the firmware are different and I had them in the same folder I just grabbed the wrong one. All was fixed as with you when I corrected my firmware.
flashed twrp the other night, didn't realize it was the wrong version... apparently sprint needs a special one.
flashed the right one. somehow have no os now.
ran ruu which failed. now it's stuck on black htc screen with exclamations in all four corners.
tried to run ruu again, just says usb error.... don't know what to do next.
Mud3 said:
flashed twrp the other night, didn't realize it was the wrong version... apparently sprint needs a special one.
flashed the right one. somehow have no os now.
ran ruu which failed. now it's stuck on black htc screen with exclamations in all four corners.
tried to run ruu again, just says usb error.... don't know what to do next.
Click to expand...
Click to collapse
I recently had the same issue, you should be able to fix this by following these steps, keep in mind, continuing this process will unroot your device. Thus, you will loose all of your data on your phone.
first begin by booting into bootloader, then plugging in your device via usb cable to your computer, it should now say "fastbootusb" on the device's screen.
if you don't already have the the fastbooot files required for your computer, you can download them here: ftp.qbking77.(com)/Files/OneDrivers_Fastboot.zip
after that, extract the zip file somewhere on your computer, and open the fastboot folder. Now hold down shift and click on an empty space in the folder and choose open new command window here, or something along those lines.
Now that you've done this, type fastboot oem lock and press enter, this will relock your phones bootloader.
Now, unplug your phone from usb, and reboot back into fastboot, and once again, plug the device into the computer. Just as before, your phones screen should now say fastboot usb. You can now flash this file via fastboot by following the instructions below.
androidfilehost.(com)/?fid=23329332407568410
rename the file downlaoded to firmware.zip and copy it to the folder containing your fastboot.exe file
now in the command prompt window, type in Fastboot oem rebootRUU
you should now see a black screen with the HTC logo, type Fastboot flash zip firmware.zip,
once that is complete, type fastboot reboot and once more, reboot into fastboot
you can now download this RUU file from the following link: androidfilehost.(com)/?fid=23329332407573774
extract the zip folder somewhere on your computer
boot into bootloader, and once again choose fastboot,
plug in your usb cable to your phone and computer, and the phone should once again say fastboot usb.
now open the folder you extracted and run ARUWizard.exe, this will unroot your device and return you to stock.
now, if you wish, you may re root your device.
Hope this works, if none of this makes sense, mention it. I typed this up in a bit of a rush.
also, you will have to copy and paste the links, as I have not made 10 general posts, so I can't add direct links to my post. Sorry mate.
have issue with the first step there... can't boot into bootloader, i'm stuck on the black screen with silver htc letters in the middle, exclamation on all four corners. i'm able to turn off the phone using the flashlight trick, but when i boot back up it's to that screen every time. it's stuck there from a failed ruu, just don't know how to get un stuck...
okay, some more info here. I was running hboot 1.57 ( i did relock) trying to run ruu 5_03_651_3 i'm not even positive this is the ruu i should be trying to use. now when I try to run the ruu it starts going but every time eventually fails wtih windows bringing up an error that says htc_fastboot.exe has topped working. i hit close program and the rom update utility gives me error [171]: usb connection error
edit: and now after the sixth time of that failing i am able to boot into bootloader again! weird... and it says i have an os now... still wont boot up all the way, but it's no longer blank on the bootloader screen.
second edit: after getting the usb error again and again i remembered glossing over something about flashing roms not liking usb 3.0 or something... switched to a usb 2.0 port and ruu worked perfectly. now to try and get this thing rooted again.
Could anyone please help me? I find when I dont keep up with this forum when I come back im kind of overwhelmed
I just installed ViperOne 8 but its saying I dont have root and also my camera never works (and didnt in V7 either).
At this point I just want to go back to 100% stock, I will likely be getting a M9 or G4 so I will have to sell this guy (such a nice phone, will be missed).
What I have (about section of the phone)
ViperOne 8.0.0
Sense 6
Android 5.0.2
SDK 6.55
Baseband 1.01.20.0904_2
If anyone could please help me I would be very appreciative
bob2300nx said:
Could anyone please help me? I find when I dont keep up with this forum when I come back im kind of overwhelmed
I just installed ViperOne 8 but its saying I dont have root and also my camera never works (and didnt in V7 either).
At this point I just want to go back to 100% stock, I will likely be getting a M9 or G4 so I will have to sell this guy (such a nice phone, will be missed).
What I have (about section of the phone)
ViperOne 8.0.0
Sense 6
Android 5.0.2
SDK 6.55
Baseband 1.01.20.0904_2
If anyone could please help me I would be very appreciative
Click to expand...
Click to collapse
Look for a RUU. They also have the RUU for the new lollipop version that was recently released. After u run the RUU u should be completely stock *note it will delete everything so you will be ready to sell. Locking the hboot if unlocked will be up to u and the other person.
Can anyone confirm that I just need to flash this in fastboot?
http://forum.xda-developers.com/spr...t/official-ruu-android-5-0-2-sense-6-t3023374
Getting an error when I try to do this. God this is so frustrating
bob2300nx said:
Can anyone confirm that I just need to flash this in fastboot?
http://forum.xda-developers.com/spr...t/official-ruu-android-5-0-2-sense-6-t3023374
Getting an error when I try to do this. God this is so frustrating
Click to expand...
Click to collapse
Download this
https://www.dropbox.com/s/v5h84hsysxvhm7g/6.16.651.2_firmware.zip?dl=0
reboot bootloader, make sure it says fastboot usb
Run these comands in CMD (copy/past)
If you are s-on
Code:
fastboot oem lock
PRESS ENTER
If you are s-off it don't matter.
Code:
fastboot reboot bootloader
PRESS ENTER
Code:
fastboot oem rebootRUU
PRESS ENTER
Code:
fastboot flash zip 6.16.651.2_firmware.zip
PRESS ENTER
Download this
https://www.dropbox.com/s/j4n7tlvvj...PCS_4.38_003_release_414036_signed_2.exe?dl=0
Run it.
S-on will delete device, s-off won't, so if you plan on getting rid of device, and it is s-off, after reboot, select restore device and select delete internal storage (if you don't want others to see those selfies of you eating banana split in PJ's with your cat)
jpwhre said:
Download this
Link removed
reboot bootloader, make sure it says fastboot usb
Run these comands in CMD (copy/past)
If you are s-on
Code:
fastboot oem lock
PRESS ENTER
If you are s-off it don't matter.
Code:
fastboot reboot bootloader
PRESS ENTER
Code:
fastboot oem rebootRUU
PRESS ENTER
Code:
fastboot flash zip 6.16.651.2_firmware.zip
PRESS ENTER
Download this
Link removed
Run it.
S-on will delete device, s-off won't, so if you plan on getting rid of device, and it is s-off, after reboot, select restore device and select delete internal storage (if you don't want others to see those selfies of you eating banana split in PJ's with your cat)
Click to expand...
Click to collapse
Thank you so much you have no idea how appreciative I am. It crashed mid way during RUU!!! I was freaking out. I had fastboot but no recovery or ROM. Just successfully flashed firmware. Now about to run RUU again.
THANK YOU THANK YOU THANK YOU!
bob2300nx said:
Thank you so much you have no idea how appreciative I am. It crashed mid way during RUU!!! I was freaking out. I had fastboot but no recovery or ROM. Just successfully flashed firmware. Now about to run RUU again.
THANK YOU THANK YOU THANK YOU!
Click to expand...
Click to collapse
Let me know when done and i can pull links from dropbox
jpwhre said:
Let me know when done and i can pull links from dropbox
Click to expand...
Click to collapse
I am on 3/6 never got past 1/6 so I think we have a winner!
jpwhre said:
Let me know when done and i can pull links from dropbox
Click to expand...
Click to collapse
Thank you buddy. Booting up now
jpwhre said:
Download this
https://www.dropbox.com/s/v5h84hsysxvhm7g/6.16.651.2_firmware.zip?dl=0
reboot bootloader, make sure it says fastboot usb
Run these comands in CMD (copy/past)
If you are s-on
Code:
fastboot oem lock
PRESS ENTER
If you are s-off it don't matter.
Code:
fastboot reboot bootloader
PRESS ENTER
Code:
fastboot oem rebootRUU
PRESS ENTER
Code:
fastboot flash zip 6.16.651.2_firmware.zip
PRESS ENTER
Download this
https://www.dropbox.com/s/j4n7tlvvj...PCS_4.38_003_release_414036_signed_2.exe?dl=0
Run it.
S-on will delete device, s-off won't, so if you plan on getting rid of device, and it is s-off, after reboot, select restore device and select delete internal storage (if you don't want others to see those selfies of you eating banana split in PJ's with your cat)
Click to expand...
Click to collapse
Hey jpwhre! I made a thread a couple days ago and was following a tip on flashing the RUU. http://forum.xda-developers.com/sprint-htc-one/help/gifted-one-broken-help-t3049802
Then I saw this thread and your reply. Thank you for the step by step guide!
I'm running into issues though with the last step from flashing the RUU.exe update utility. The flash keeps freezing at "Updating (1/6) sending..." I was stuck there for over an hour and decided to pull the plug. I redid all your step, but instead of using the RUU.exe, I downloaded the encrypted RUU rom.zip and tried to flash via flashboot cmd promt. That ALSO failed with a "signature verify fail." What am I doing wrong? I'm *LOCKED* and S-ON.