Related
Basically, I tried to flash the latest 5.1 image but unsuccessfully as the system.img wasn't extracted. For some reason I locked the bootloader and now I can't boot into a working system, and I can't reflash anything as the bootloader is locked. When attempting to unlock, it is telling me to go into dev settings to allow unlock.
Is there anything I can do?
Few threads about this today. Seems a regular user error. Can't think of a fix right now..
rootSU said:
Few threads about this today. Seems a regular user error. Can't think of a fix right now..
Click to expand...
Click to collapse
Hmm, thanks anyway. I think this means I'm bricked. Moto E time I think.
boot to bootloader, fastboot oem unlock from fastboot command console on computer.
TheAmazingDave said:
boot to bootloader, fastboot oem unlock from fastboot command console on computer.
Click to expand...
Click to collapse
Can't be done.
Have the same problem and try to solve it with Motorola. No luck at the moment.
lee.jarratt said:
Basically, I tried to flash the latest 5.1 image but unsuccessfully as the system.img wasn't extracted. For some reason I locked the bootloader and now I can't boot into a working system, and I can't reflash anything as the bootloader is locked. When attempting to unlock, it is telling me to go into dev settings to allow unlock.
Is there anything I can do?
Click to expand...
Click to collapse
try flashing the factory img via your bootloader/fastboot
simms22 said:
try flashing the factory img via your bootloader/fastboot
Click to expand...
Click to collapse
Can't. Boot loader is locked and requires a setting in android to be changed but android can't boot. Catch 22
rootSU said:
Can't. Boot loader is locked and requires a setting in android to be changed but android can't boot. Catch 22
Click to expand...
Click to collapse
Are you positive? I just flashed a Nexus 7 from 5.0.2 to 4.4.4 with fastboot. fastboot oem unlock worked without checking that box.
TheAmazingDave said:
Are you positive? I just flashed a Nexus 7 from 5.0.2 to 4.4.4 with fastboot. fastboot oem unlock worked without checking that box.
Click to expand...
Click to collapse
That's what all the threads about this today are saying... Including the op of this thread.
rootSU said:
That's what all the threads about this today are saying... Including the op of this thread.
Click to expand...
Click to collapse
Damn, that's really lame...
Wow this craps really ticking me off with this update and all. I have been rooting modding for years and every damn time I get a device that uses fastboot I get nothing but trouble. I hard bricked three devices in the past with fastboot and it seems over the years fastboot hasn't gotten any better or easier. What a shame I love the nexus 6 but I'm seriously starting to reconsider and going back to the good old Odin devices.
I'm an idiot.
I made the mistake of trying to update my Nexus 6 (Stock 5.0 encrypted, rooted, Xposed) while talking to AT&T customer service on my other phone. Distracted flashing is a bad idea. I am sure I made SEVERAL mistakes.
I too was trying to flash the new 5.1 image and got an error when running ./flash-all.sh (I'm on a Macbook). Friend suggested I try to do it by flashing the boot.img recovery.img and then system.img manually. Got the boot to flash. Recovery flashed. System failed. Unfortunately I have closed the terminal windows and don't have the errors anymore. When it failed it said something about insufficient space. So (I'm assuming this is where I f**ked up) I hit start from the boot loader screen to boot into the system and delete some things even though I had plenty of space (over 20gb). It booted fine. When I went to reboot into bootloader, I accidentally selected recovery. It booted back into TWRP which confused me. I thought best bet would be to wipe the device and start over fresh. I wiped everything and booted back into bootloader... blackness. Now I have no response from the device at all. Nothing. No response from the power button. Nothing when I plug to a charger. Just blackness. Just a pretty, 2 day old Nexus 6 (warranty replacement from T-Mobile on Tuesday).
You wiped the boot partition too? Ouch...
Last time I did that, it was with my Nook Color. Thankfully that was able to boot from SD cards...
I have a similar problem with another Nexus 7 right now. Flash went corrupt, won't boot at all. No bootloader, no Google logo, nothing.
My only hope is that the device still talks to the computer, it shows up as a Qualcomm device under Ports in Windows Dev Manager. QPST picks it up and says it's in download mode. If I can source the hex files to flash, I think I can bring it back. I'm only sharing that because it might be your only hope too. Godspeed, sir.
beachbum40 said:
Wow this craps really ticking me off with this update and all. I have been rooting modding for years and every damn time I get a device that uses fastboot I get nothing but trouble. I hard bricked three devices in the past with fastboot and it seems over the years fastboot hasn't gotten any better or easier. What a shame I love the nexus 6 but I'm seriously starting to reconsider and going back to the good old Odin devices.
Click to expand...
Click to collapse
lol, whats so hard with fastboot? fastboot oem unlock is rocket science? how about fastboot flash recovery recname.img? only way to hardbrick with fastboot is to flaah something to your device that doesnt belong there, or flash something into the wrong partition. how did you "hard brick" with fastboot???
simms22 said:
lol, whats so hard with fastboot? fastboot oem unlock is rocket science? how about fastboot flash recovery recname.img? only way to hardbrick with fastboot is to flaah something to your device that doesnt belong there, or flash something into the wrong partition. how did you "hard brick" with fastboot???
Click to expand...
Click to collapse
The problem is that bootloader got relocked, and the OP is unable to get to the setting to enable oem unlock. Fastboot is errors out saying to Check "Allow OEM unlock", and FAILED (remote failure).
I would find it hard to believe that there is no solution to this. With all the bright minds here on XDA, I'm sure it can be figured out. The unlock setting must be stored somewhere, and it should be accessible.
When I first got my Nexus 6, I booted into the bootloader right after taking it out of the box (i.e., without booting into Android), and I was able to unlock the bootloader without having checked "Allow OEM unlock" in developer options. This could mean that the setting could potentially be located in /data somewhere.
OP, have you tried a factory reset in recovery? Have you tried playing around with the other bootloader menu items (e.g., "Factory", etc.)?
efrant said:
I would find it hard to believe that there is no solution to this. With all the bright minds here on XDA, I'm sure it can be figured out. The unlock setting must be stored somewhere, and it should be accessible.
When I first got my Nexus 6, I booted into the bootloader right after taking it out of the box (i.e., without booting into Android), and I was able to unlock the bootloader without having checked "Allow OEM unlock" in developer options. This could mean that the setting could potentially be located in /data somewhere.
OP, have you tried a factory reset in recovery? Have you tried playing around with the other bootloader menu items (e.g., "Factory", etc.)?
Click to expand...
Click to collapse
Thank you for taking a look at my post. I have tried all the options in the bootloader menu with no dice. Things aren't looking promising for me...
You're all using the newest fastboot?
flash the factory img
edit.. nevermind, i see ive already said that
I have a rather odd issue. I've been using the M preview, and after I rooted it, it restarted on me randomly. Anyway, I now have a fresh update to 5.1.1 from stock 5.1. My bootloader is re-locked, the bootloader version is matched to the proper system version, the stock recovery is in place. There is just one problem. Whenever I try to turn off the phone, restart it, enter recovery from android, connect it to a pc, or any other task that takes me out of android, it always boots to the bootloader and I have to choose it from there. There doesn't seem to be any issue getting to anything, it's just I can't change anything about the bootloader no matter what I do. I've been there and back again with unlocking, re-flashing and even now taking a full stock ota from a locked BL. I'm really stuck and could use some help. In the meantime, I'll keep trying and update if I can get anywhere with it. Thanks for reading!
Perhaps something is going on with your volume rocker. Does your volume rocker function normally? Maybe you have a case that could put some pressure on the volume rocker?
Actually, my problem was that the fb_mode_set was enabled, which will always boot into it. It's a stock precaution for updates. The solution was to enable fb_mode_clear, which returned the phone to booting normally. I hope if anyone gets into this situation down the road, this helps them out.
-Mike
kibmikey1 said:
Actually, my problem was that the fb_mode_set was enabled, which will always boot into it. It's a stock precaution for updates. The solution was to enable fb_mode_clear, which returned the phone to booting normally. I hope if anyone gets into this situation down the road, this helps them out.
-Mike
Click to expand...
Click to collapse
You might want to explain to them how to do it
danarama said:
You might want to explain to them how to do it
Click to expand...
Click to collapse
+1 yes please.
Sure. I clean flashed M and rooted it. It randomly rebooted twice on me when I tried to get a script to access root. After that, it was a bootloop at the regular startup screen. So, I entered into TWRP next, it started flashing. The only thing to do was to get into bootloader and reflash via fastboot, so that's what I did. I knew that I could downgrade the BL because it's a preview, but that wasn't my intention at the time. I took the google image of LYZ28E and flashed that, including the bootloader, fresh. Everything worked fine, except that the bootloader was now the first startup screen no matter what I did. I even downgraded to .08, which is as far back as you can go on 5.1! It didn't matter. BL was always the first screen up. So today, I started looking at the configuration of the BL. It seems that there is a safety protocol built into the BL that switches on when an unexpected error occurs, or when the BL is downgraded. It's there for things like firmware updates, etc. so that you don't end up with mismatches, which could potentially brick the phone. It makes sense, actually. Since I rolled back, it just switched on. I just wish there had been a little more literature on fastboot oem commands and their uses, it would have made for quite an easier time with this. Anyway, if you find yourself always starting up at the BL, try fastboot oem fb_mode_clear, which will disable the safety loop, and it should boot regularly. Again, I hope this helps, and if anyone has any questions, feel free to shoot me a message.
Edit: The entire process (TL;DR version)
1. Enter fastboot mode (if it's not already up)
2. Connect your phone to your pc
3. Open terminal
4. Type "fastboot oem fb_mode_clear"
5. Restart phone. It should now boot regularly.
-Mike
kibmikey1 said:
Sure. I clean flashed M and rooted it. It randomly rebooted twice on me when I tried to get a script to access root. After that, it was a bootloop at the regular startup screen. So, I entered into TWRP next, it started flashing. The only thing to do was to get into bootloader and reflash via fastboot, so that's what I did. I knew that I could downgrade the BL because it's a preview, but that wasn't my intention at the time. I took the google image of LYZ28E and flashed that, including the bootloader, fresh. Everything worked fine, except that the bootloader was now the first startup screen no matter what I did. I even downgraded to .08, which is as far back as you can go on 5.1! It didn't matter. BL was always the first screen up. So today, I started looking at the configuration of the BL. It seems that there is a safety protocol built into the BL that switches on when an unexpected error occurs, or when the BL is downgraded. It's there for things like firmware updates, etc. so that you don't end up with mismatches, which could potentially brick the phone. It makes sense, actually. Since I rolled back, it just switched on. I just wish there had been a little more literature on fastboot oem commands and their uses, it would have made for quite an easier time with this. Anyway, if you find yourself always starting up at the BL, try fastboot oem fb_mode_clear, which will disable the safety loop, and it should boot regularly. Again, I hope this helps, and if anyone has any questions, feel free to shoot me a message.
Edit: The entire process (TL;DR version)
1. Enter fastboot mode (if it's not already up)
2. Connect your phone to your pc
3. Open terminal
4. Type "fastboot oem fb_mode_clear"
5. Restart phone. It should now boot regularly.
-Mike
Click to expand...
Click to collapse
Hi! I know I am a bit late to reply but for me the "fastboot oem fb_mode_clear" did not do the trick.
I started to play around with the commands and I finally got the alternative. This one did fix the issue for me, and for anyone whose phone did not get fixed by Mike's method, try this--
do steps 1,2,3 for Mike's method and on the 4th step use "fastboot oem fb_mode_clear system" instead of just "fastboot oem fb_mode_clear".
-Sakuta
Hope I had been of help to at least one person. : )
Here's the story. Got Google Fi package and Nexus 6 today. Decided I'd load Android M preview on Nexus 6. did all the fastboot stuff to get the developer preview installed, then while still in fastboot mode I installed TWRP, then locked fastboot, then rebooted into TWRP. Pushed ROM zip to /sdcard through adb, tried wiping everything failed. Tried flashing zip, everything failed. Decided to reboot. TWRP asked me if I wanted to install SuperSU, i chose to because I thought I might need it to get TWRP working. After rebooting got message "Your device has failed verification and may not work properly" then it powers off. I can boot into fastboot/recovery, but in recovery the touchscreen doesn't work so I can't do anything. Booting normally gives the failed verification message. Tried fastboot format userdata, which I believe is what caused the touchscreen to cease registering in TWRP.
Is there any way for me to recover this thing? Back when I had a Galaxy Nexus, and even with my S5, there's nothing really that can be done that would completely brick the thing. I'm pretty dumbfounded that a Nexus device would be so easily bricked...it's not like I don't have experience with this stuff, I've been rooting and developing Android apps for years.
I have a feeling I have to return the thing, but Amazon has no more stock, and if I buy directly from Google or Motorola I'll have to pay sales tax.
Any help is greatly appreciated.
claytonjn said:
Here's the story. Got Google Fi package and Nexus 6 today. Decided I'd load Android M preview on Nexus 6. did all the fastboot stuff to get the developer preview installed, then while still in fastboot mode I installed TWRP, then locked fastboot, then rebooted into TWRP. Pushed ROM zip to /sdcard through adb, tried wiping everything failed. Tried flashing zip, everything failed. Decided to reboot. TWRP asked me if I wanted to install SuperSU, i chose to because I thought I might need it to get TWRP working. After rebooting got message "Your device has failed verification and may not work properly" then it powers off. I can boot into fastboot/recovery, but in recovery the touchscreen doesn't work so I can't do anything. Booting normally gives the failed verification message. Tried fastboot format userdata, which I believe is what caused the touchscreen to cease registering in TWRP.
Is there any way for me to recover this thing? Back when I had a Galaxy Nexus, and even with my S5, there's nothing really that can be done that would completely brick the thing. I'm pretty dumbfounded that a Nexus device would be so easily bricked...it's not like I don't have experience with this stuff, I've been rooting and developing Android apps for years.
I have a feeling I have to return the thing, but Amazon has no more stock, and if I buy directly from Google or Motorola I'll have to pay sales tax.
Any help is greatly appreciated.
Click to expand...
Click to collapse
Did you lock the bootloader just to be clear?
bricked? no, you just didnt read up in information properly. you relocked your bootloader. as of android 5.0, you have to enable unlocking the bootloader after you boot up in the developer section. since you relocked your bootloader before you checked if your device will boot, you can not unlick your bootloader again, which means you can not use twrp either. what you can try is using fastboot to wipe your cache and data. if that doesnt work, id try to get an rma.
gee2012 said:
Did you lock the bootloader just to be clear?
Click to expand...
Click to collapse
Yes. I still remembered all of the flashboot commands from my Galaxy Nexus. It didn't even occur to me to look anything up.
simms22 said:
bricked? no, you just didnt read up in information properly. you relocked your bootloader. as of android 5.0, you have to enable unlocking the bootloader after you boot up in the developer section. since you relocked your bootloader before you checked if your device will boot, you can not unlick your bootloader again, which means you can not use twrp either. what you can try is using fastboot to wipe your cache and data. if that doesnt work, id try to get an rma.
Click to expand...
Click to collapse
If a device is unusable, without any way to recover it, it's essentially a paperweight, or bricked. So if my only option is an RMA, then it is bricked. I don't mean to sound rude or argumentative by the way... I appreciate your help. Just clarifying the semantics.
Debt from my Developer Edition Galaxy S5 using Tapatalk
have you tried fastboot oem unlock again ?
uicnren said:
have you tried fastboot oem unlock again ?
Click to expand...
Click to collapse
Yes, it says it needs to be enabled in developer options
Sent from my Developer Edition Galaxy S5 using Tapatalk
when you get the failed verification message, what happens after that?
does it ever make it to the M preview?
Also if you wait a little while after that message, you may be able to use adb commands again.
I had the same thing happen with M and TWRP and was able to recover it.
uicnren said:
when you get the failed verification message, what happens after that?
does it ever make it to the M preview?
Also if you wait a little while after that message, you may be able to use adb commands again.
I had the same thing happen with M and TWRP and was able to recover it.
Click to expand...
Click to collapse
It says it will reboot in 5 seconds, but after 5 seconds the screen just goes blank. It appears the device is off, but maybe not.
Do you know what adb commands I would need to use to recover from this state?
Sent from my Developer Edition Galaxy S5 using Tapatalk
claytonjn said:
Yes. I still remembered all of the flashboot commands from my Galaxy Nexus. It didn't even occur to me to look anything up.
If a device is unusable, without any way to recover it, it's essentially a paperweight, or bricked. So if my only option is an RMA, then it is bricked. I don't mean to sound rude or argumentative by the way... I appreciate your help. Just clarifying the semantics.
Debt from my Developer Edition Galaxy S5 using Tapatalk
Click to expand...
Click to collapse
technically, its not bricked, not yet anyways. as many people have fixed this issue using fastboot to wipe cache and data.
well, let it sit for a few minutes after the message, it may just boot normally. That verification message appears with M preview for many users.
you may also see HERE for another possible solution.
if adb is working, chances are pretty good its booting into android, in which case you wont need to do anything else, but let it boot (be patient, it can take several minutes), then retick the selection to allow oem unlock.
simms22 said:
technically, its not bricked, not yet anyways. as many people have fixed this issue using fastboot to wipe cache and data.
Click to expand...
Click to collapse
Unfortunately that is not working for me (Not allowed in locked state!)
uicnren said:
well, let it sit for a few minutes after the message, it may just boot normally. That verification message appears with M preview for many users.
you may also see HERE for another possible solution.
if adb is working, chances are pretty good its booting into android, in which case you wont need to do anything else, but let it boot (be patient, it can take several minutes), then retick the selection to allow oem unlock.
Click to expand...
Click to collapse
ADB works when I boot to TWRP, but when I try to boot normally, after the device will boot in 5 seconds message, the screen goes blank and adb does not work. I let it sit like that for more than 30 minutes. Curiously, when the screen goes blank my PC does chime indicating hardware has been attached.
Can you still get into twrp? If so just move a ROM over to it and flash that, enable OEM unlock restart and unlock boot loader...
claytonjn said:
Unfortunately that is not working for me (Not allowed in locked state!)
ADB works when I boot to TWRP, but when I try to boot normally, after the device will boot in 5 seconds message, the screen goes blank and adb does not work. I let it sit like that for more than 30 minutes. Curiously, when the screen goes blank my PC does chime indicating hardware has been attached.
Click to expand...
Click to collapse
If you have TWRP, boot to bootloader and use the following fastboot commands:
fastboot format userdata
fastboot format cache
Then boot to TWRP, connect to PC. Download a ROM to your PC and drag and drop in the root of internal storage. Then flash the ROM from TWRP, boot up, enable OEM unlock. Then boot back to bootloader and:
fastboot oem unlock
You should be good after that.
holeindalip said:
Can you still get into twrp? If so just move a ROM over to it and flash that, enable OEM unlock restart and unlock boot loader...
Click to expand...
Click to collapse
I can boot into TWRP. At first it was "working" but it couldn't mount /data so I couldn't really do anything (that was the first thing I tried.) Now however when I boot to TWRP it doesn't respond to touch at all... I can get into a shell with adb, but I haven't figured out anything to do from there.
claytonjn said:
I can boot into TWRP. At first it was "working" but it couldn't mount /data so I couldn't really do anything (that was the first thing I tried.) Now however when I boot to TWRP it doesn't respond to touch at all... I can get into a shell with adb, but I haven't figured out anything to do from there.
Click to expand...
Click to collapse
Follow my instructions listed above.
Evolution_Tech said:
Follow my instructions listed above.
Click to expand...
Click to collapse
II'm attempting that now.but fastboot format userdata and fastboot format cache fail. after booting into twrp the Nexus shows up in My Computer, but internal storage does not. I can push a ROM zip to the device with adb, but haven't figured out how to flash it yet because touch doesn't work...
SUCCESS! I was able to flash the ROM .zip using ADB in TRWP using
Code:
ADB push ROM.zip /sdcard/.
ADB shell
twrp install /sdcard/ROM.zip
THANK YOU EVERYONE!
claytonjn said:
SUCCESS! I was able to flash the ROM .zip using ADB in TRWP using
Code:
ADB push ROM.zip /sdcard/.
ADB shell
twrp install /sdcard/ROM.zip
THANK YOU EVERYONE!
Click to expand...
Click to collapse
glad you got it back, persistence pays off.
Lesson learned today? QUIT RE-LOCKING YOUR BOOTLOADER!
You can lock boot loader, you just have to make sure your phone boots first before locking it
I was trying to fix an issue with my phone the other day, and saw that re-locking the bootloader might fix it. Nobody mentioned anything about it completely wiping the phone, including the internal SD card. I set most of the stuff back up again but realized that it was suffering from the bug on the old radio version that causes it to lose LTE randomly.
I went and rebooted into TWRP to try and flash it, and TWRP showed a completely empty sdcard partition and said it could not mount '/data'. I enabled "require pattern to boot," thinking it may not have known to decrypt the partition without that, and now I can't get into TWRP at all. I tried disabling the "require pattern to boot" option again but no luck. It shows the "Google" logo for about 5 seconds, then the blue "TEAMWIN" logo for about 3 seconds, then reboots to the "Google" logo and proceeds to boot normally. I should note that I have CM12.1 installed, and the latest TWRP. I've tried reflashing TWRP and that didn't help; I also did "fastboot format cache" and then "fastboot flash cache cache.img" using the stock factory cache.img. I got the radio flashed using fastboot, but I'd really like to have a working recovery.
briman0094 said:
I was trying to fix an issue with my phone the other day, and saw that re-locking the bootloader might fix it. Nobody mentioned anything about it completely wiping the phone, including the internal SD card. I set most of the stuff back up again but realized that it was suffering from the bug on the old radio version that causes it to lose LTE randomly.
I went and rebooted into TWRP to try and flash it, and TWRP showed a completely empty sdcard partition and said it could not mount '/data'. I enabled "require pattern to boot," thinking it may not have known to decrypt the partition without that, and now I can't get into TWRP at all. I tried disabling the "require pattern to boot" option again but no luck. It shows the "Google" logo for about 5 seconds, then the blue "TEAMWIN" logo for about 3 seconds, then reboots to the "Google" logo and proceeds to boot normally. I should note that I have CM12.1 installed, and the latest TWRP. I've tried reflashing TWRP and that didn't help; I also did "fastboot format cache" and then "fastboot flash cache cache.img" using the stock factory cache.img. I got the radio flashed using fastboot, but I'd really like to have a working recovery.
Click to expand...
Click to collapse
no working recovery with a locked bootloader, sorry. if the bootloader is locked, you cant flash anything. its locked. to flash things, you need an unlocked bootloader. its like locking a door, but expecting it to open magically when you walk up to it.
simms22 said:
no working recovery with a locked bootloader, sorry. if the bootloader is locked, you cant flash anything. its locked. to flash things, you need an unlocked bootloader. its like locking a door, but expecting it to open magically when you walk up to it.
Click to expand...
Click to collapse
I forgot to mention that I re-unlocked the bootloader. I can also boot the OS so I'd be able to enable OEM unlock again if needed.
briman0094 said:
I forgot to mention that I re-unlocked the bootloader. I can also boot the OS so I'd be able to enable OEM unlock again if needed.
Click to expand...
Click to collapse
important thing to forget to mention
So what happened when you reflashed the lasted version of twrp for your device after verifying the downloads md5?
simms22 said:
important thing to forget to mention
Click to expand...
Click to collapse
I guess I assumed that when I said "continues to boot normally" people would assume I could re-enable "OEM Unlock" if needed
scryan said:
So what happened when you reflashed the lasted version of twrp for your device after verifying the downloads md5?
Click to expand...
Click to collapse
All the console output indicates success, and it boots to the initial "TEAMWIN" logo for a few seconds and reboots.
No Recovery Similiar issue
briman0094 said:
I was trying to fix an issue with my phone the other day, and saw that re-locking the bootloader might fix it. Nobody mentioned anything about it completely wiping the phone, including the internal SD card. I set most of the stuff back up again but realized that it was suffering from the bug on the old radio version that causes it to lose LTE randomly.
I went and rebooted into TWRP to try and flash it, and TWRP showed a completely empty sdcard partition and said it could not mount '/data'. I enabled "require pattern to boot," thinking it may not have known to decrypt the partition without that, and now I can't get into TWRP at all. I tried disabling the "require pattern to boot" option again but no luck. It shows the "Google" logo for about 5 seconds, then the blue "TEAMWIN" logo for about 3 seconds, then reboots to the "Google" logo and proceeds to boot normally. I should note that I have CM12.1 installed, and the latest TWRP. I've tried reflashing TWRP and that didn't help; I also did "fastboot format cache" and then "fastboot flash cache cache.img" using the stock factory cache.img. I got the radio flashed using fastboot, but I'd really like to have a working recovery.
Click to expand...
Click to collapse
Briman, I seem to have a similar issue on my and wife's Google Nexus 6s. I unlocked and rooted using Wug Tool Kit I used in years past with seamless success. To confirm root CM 12.1 I can get into bootloader, Teamwin. From there I am to flash the Superuser, Busybox and TWRP zips under SD\iReady to Flash\Rootfiles..... Only I am not given an option on the menu? I am struggling with using the command prompt and proper paths from SDK Tools so that is not an option at this moment. I see a File Manager that shows this path but am hesitant to use it as I have READ this could cause damage ( brick) to the system. Watching your thread for answers or possibilities. I know the senior members as Simm22 dislike tool kits and so do I. I am simply trying to grow and learn.
ray6279 said:
Briman, I seem to have a similar issue on my and wife's Google Nexus 6s. I unlocked and rooted using Wug Tool Kit I used in years past with seamless success. To confirm root CM 12.1 I can get into bootloader, Teamwin. From there I am to flash the Superuser, Busybox and TWRP zips under SD\iReady to Flash\Rootfiles..... Only I am not given an option on the menu? I am struggling with using the command prompt and proper paths from SDK Tools so that is not an option at this moment. I see a File Manager that shows this path but am hesitant to use it as I have READ this could cause damage ( brick) to the system. Watching your thread for answers or possibilities. I know the senior members as Simm22 dislike tool kits and so do I. I am simply trying to grow and learn.
Click to expand...
Click to collapse
na, toolkits work fine. sure, they occasionally do mess up, but its not very ofver. i generally like ut when noobies do the rooting the correct way the first time, that way they can learn some basic things about how everything works. then, they can yse toolkits all they
btw, teamwin isnt your bootloader, its your recovery. team win = twrp. now all you need to do is download the latest supersu and flash it via your recovery, and the you can install a busybox app from tbe play store, and use it to unstall .
briman0094 said:
I was trying to fix an issue with my phone the other day, and saw that re-locking the bootloader might fix it.
Click to expand...
Click to collapse
Saw that bit of advice where? I can't think of a single thing re-locking the bootloader would fix.
nhizzat said:
Saw that bit of advice where? I can't think of a single thing re-locking the bootloader would fix.
Click to expand...
Click to collapse
A screenshot of an e-mail from a Google employee regarding Android Pay and SafetyNet.
50% JOY No Fastboot?
simms22 said:
na, toolkits work fine. sure, they occasionally do mess up, but its not very ofver. i generally like ut when noobies do the rooting the correct way the first time, that way they can learn some basic things about how everything works. then, they can yse toolkits all they
btw, teamwin isnt your bootloader, its your recovery. team win = twrp. now all you need to do is download the latest supersu and flash it via your recovery, and the you can install a busybox app from tbe play store, and use it to unstall .
Click to expand...
Click to collapse
I followed your directions while working on my Nexus6 phone. Was able to access bootloader then install iReady files. Worked perfectly and phone loaded SUPERUSER, BUSYBOX & PERM RECOVERY. Not so much on wife's Nexus 6. I get thru UNLOCK & ROOT w/custom recovery on the Wug Fresh Tool Kit. At RECOVERY menu pulls up SD - Up one level. No option is allowed to continue on and load the three mentioned packages. I then able to reboot to system. Does it appear I am bootloading but not fastbooting? Will try and insert images.
ray6279 said:
I followed your directions while working on my Nexus6 phone. Was able to access bootloader then install iReady files. Worked perfectly and phone loaded SUPERUSER, BUSYBOX & PERM RECOVERY. Not so much on wife's Nexus 6. I get thru UNLOCK & ROOT w/custom recovery on the Wug Fresh Tool Kit. At RECOVERY menu pulls up SD - Up one level. No option is allowed to continue on and load the three mentioned packages. I then able to reboot to system. Does it appear I am bootloading but not fastbooting? Will try and insert images.
Click to expand...
Click to collapse
one question.. what is perm recovery?? the only recovery that works on the n6 is twrp recovery.
and when you are in her recovery, is it showing you the right location where the files should be? if nit, you csn change the lication.
Simm & Others. Thank you for your good words and suggestions. It would be easier for me to list what I did not attempt rather than what I did try. . I tried nearly most functions in the Wug Fresh ( by Harold) v2.0.5 after failing to find the correct command prompt to use ADB. What happened is an odditity. Mind you, I've been on these two Nexus 6 phones for 4-6hours a day for about ten days! Day later, Happened to be waiting for wife in parking lot and picked up phone and pressed SuperUser. Viola! It went into TWRP and gave me an RECOVERY option. On impluse, I flashed TWRP and Superuser zips. It took and processed. however, the best part of this is the hands on learning experience of booting, flashing, wiping, language, terms, SDK, Android and more. Once I figure out my path problem on my windows based PC to loading ABD commands I am continuing my self study of Android and App development. How do I get the packages out of the SDK Tool Kit to folders in PC? Thanks all.
ray6279 said:
Simm & Others. Thank you for your good words and suggestions. It would be easier for me to list what I did not attempt rather than what I did try. . I tried nearly most functions in the Wug Fresh ( by Harold) v2.0.5 after failing to find the correct command prompt to use ADB. What happened is an odditity. Mind you, I've been on these two Nexus 6 phones for 4-6hours a day for about ten days! Day later, Happened to be waiting for wife in parking lot and picked up phone and pressed SuperUser. Viola! It went into TWRP and gave me an RECOVERY option. On impluse, I flashed TWRP and Superuser zips. It took and processed. however, the best part of this is the hands on learning experience of booting, flashing, wiping, language, terms, SDK, Android and more. Once I figure out my path problem on my windows based PC to loading ABD commands I am continuing my self study of Android and App development. How do I get the packages out of the SDK Tool Kit to folders in PC? Thanks all.
Click to expand...
Click to collapse
your welcome, but you are still off in one bit of fact. you use fastboot, not adb, to flash a recovery(and system.img)
edit.. you can use apps like flashify to flash recovery, if you have root already.
So BOOTLOADER is the USB connection between the device and PC. FASTBOOT is the process via we make changes in the device via the PC. ADB is the device language via which we communicate. So do I still need to flash a system recovery image? Flashify App? I already went thru install>iready to flash> superuser (version)>busybox>flash>reboot>system. I'm going cross eyed from reading. The wiping part worries me as I fear formatting or deleting essential data.
ray6279 said:
So BOOTLOADER is the USB connection between the device and PC. FASTBOOT is the process via we make changes in the device via the PC. ADB is the device language via which we communicate. So do I still need to flash a system recovery image? Flashify App? I already went thru install>iready to flash> superuser (version)>busybox>flash>reboot>system. I'm going cross eyed from reading. The wiping part worries me as I fear formatting or deleting essential data.
Click to expand...
Click to collapse
ok, when wiping, dont do the first option wipe, itll wipe your whole phone clean. you need to select the advanced options and pick what you want wiped. fastboot is the way to unlock your bootloader, or flash a recovery. also, you use it to flash a system.img or any part of it.
adb is a general linux that can be used with android, anywhere but in the bootloader(only fastboot in the bootloader).
bootloader isnt the usb connection between the device and the pc, its part of the phone that boots it and decides if the rom is safe to run. thats why we unlock it. so we can flash roms eithout googles key.
fastboot is the tool that you use to do whatever needs to be fone in the bootloader, adb everywhere else.
a recovery you need if you want to flash custom roms, kernels, supersu, or other mods. you can also wipe different partitions with the recovery, or make a "nandroid' backup. thats a bavkup of everything. its like a complete snapshot of everything during the time you made it. if you ever mess up your phone, you can restore it, and you will be at the exact same place when you made the backup.
anything else?
Hello, XDA forums. I was trying to get Miracast to work on my cousin's Nexus 6 device; doing sone research I found that it was as modifying a value in the build.prop file. Naturally, I was like "Pshh, easy!" (Note that the device was already rooted.)
So I download a build.prop editor and apply the edit, save the file. Superuser request, granted, saved. I noticed that the editor now displayed build.prop as an empty file, but still had the values loaded; okay, whatever.
I rebooted the device to apply the changes. It was stuck at the Google post screen and had not continued to the boot animation.
After waiting a couple minutes I realized there was an issue. Okay, so I would just use the adb interface to replace the build.prop file with the stock file, easy, no issue. Turns out when I rooted the device a while back I never flashed CWM or TWRP, so I had to get into the backup recovery, since attempting to factory reset from the bootloader resulted in the same as a normal boot.
Once I had gotten into the backup recovery I plugged the device in and attempted to update the build.prop file. I couldn't get further than 'adb root', it would result in an error for every command except sideload and USB. I tried for quite a while to resolve that issue.
That wasn't working so I was like "I'll just flash the OS since I have the ability to sideload", so I flashed the stock Nexus 6 ROM and still had the same issue.
Does anybody know of a solution?
@Drasid,
Download the factory image from Google developer site. Extract all the files. Fastboot flash the system, and boot image files from bootloader.
@cam30era,
I can do this with the stock recovery?
I can only secure an adb connection through that; fastboot commands do not work in it.
Drasid said:
@cam30era,
I can do this with the stock recovery?
I can only secure an adb connection through that; fastboot commands do not work in it.
Click to expand...
Click to collapse
No you use fast boot to flash factory images, adb to push a factory ota file
@Holeibdalip, Oh yeah, I was explaining the issue then my friend then realized "Wait, you can't fastboot like that, you fastboot in the bootloader."
It was one of those "Duh" moments.
Drasid said:
@Holeibdalip, Oh yeah, I was explaining the issue then my friend then realized "Wait, you can't fastboot like that, you fastboot in the bootloader."
It was one of those "Duh" moments.
Click to expand...
Click to collapse
And if you reread carefully what I wrote, I said "fastboot flash"....
Drasid said:
@Holeibdalip, Oh yeah, I was explaining the issue then my friend then realized "Wait, you can't fastboot like that, you fastboot in the bootloader."
It was one of those "Duh" moments.
Click to expand...
Click to collapse
Happens to the best of us lol
Alright so I reinstalled Android and it worked. Though on the setup page it said that my cousin couldn't log in and had to wait 24 hours (FRP). So, we waited a day and it persisted. I did some research and found a couple ways to fix it. Using adb I launched the settings app and performed a factory reset in the os. I still got the error afterwards, though I read that would fix it. Then I wiped the partition which is supposed to contain the frp information, that didn't work. I also tried to enable OEM unlocking in the os so I could fastboot OEM unlock and fix it, though the developer options appeared empty. I am unsure what to do next.
Edit: I flashed the system with the google developer image and reinstalled it, I got it to work, thanks for your guys's help.