I'd like to return to stock directly to 4.4.2, and found this, but apparently the link for AHD is down. Anyone know if there's a mirror for it?
I currently have Blisspop installed. No ADB detection (adb turned on, phone says connected but PC doesn't see it), and fastboot isn't being detected. Anyone able to help?
Silly me, forgot to install Moto USB drivers on new Windows install.
Lmao bro, good to see you back buddy. So did you get it work?
TecknoFreak said:
Lmao bro, good to see you back buddy. So did you get it work?
Click to expand...
Click to collapse
I did after a bit of re-learning. Was on LGG2 for a while but it broke so I'm back on the HD. Turns out there is no official KitKat for the HD, that page is misleading and I've been spamming "System updates" on stock for half an hour.
Back on stock now (obviously) and can't manage to get CWM or PhilZ working, manually or through Myth. Just the stupid broken android. It's midnight here, so that's probably playing a factor in it. More tinkering tomorrow...
Try rooting with saferoot, then use mythtools or flashify for recovery.
Sent from my LG-D850 using XDA Free mobile app
bmatney said:
Try rooting with saferoot, then use mythtools or flashify for recovery.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
What exactly is Saferoot? Never heard of it and Motochopper is the standard for this gen of Moto devices.
Some people have had issues if they are on the newest firmware with motochopper.
Sent from my LG-D850 using XDA Free mobile app
TecknoFreak said:
Lmao bro, good to see you back buddy. So did you get it work?
Click to expand...
Click to collapse
bmatney said:
Some people have had issues if they are on the newest firmware with motochopper.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, well I done did it this time. Got up to stock ATT 4.1.1, then when I learned 4.4.2 isn't actually available yet, flashed Blisspop, which ran terribly, trying to go back to stock again with same fxz, trying to update to 4.1.1, the update gives me invalid GPT, stuck in fastboot, and apparently my bootloader got re-locked.
Any attempt to flash anything through fastboot returns a remote failure. Think I may be ****ed here.
penser said:
Okay, well I done did it this time. Got up to stock ATT 4.1.1, then when I learned 4.4.2 isn't actually available yet, flashed Blisspop, which ran terribly, trying to go back to stock again with same fxz, trying to update to 4.1.1, the update gives me invalid GPT, stuck in fastboot, and apparently my bootloader got re-locked.
Any attempt to flash anything through fastboot returns a remote failure. Think I may be ****ed here.
Click to expand...
Click to collapse
Your bootloader is not re-locked, just your gpt partition has been made invalid by gpt downgrade done by OTA (and because of that, the lock status can't be correctly determined by bootloader anymore).
All you have to do to fix it is to extract the gpt partition from the latest att OTA update and flash it via fastboot.
(I assume that you've been on the second aka latest 4.1.1 update from att [98.5.38], then downgraded to 4.0.4 by fxz while skipping gpt and tz flash, then took ota to the first 4.1.1 att update [98.4.20], resulting in downgraded gpt, because the actual gpt on your device before you took the ota was the newer one from the second 4.1.1 att ota [98.5.38].)
EDIT:
The latest att ota is attached to this post: http://forum.xda-developers.com/showpost.php?p=52657363&postcount=13
Extract gpt_main0.bin from the zip and flash it:
Code:
fastboot flash partition gpt_main0.bin
kabaldan said:
Your bootloader is not re-locked, just your gpt partition has been made invalid by gpt downgrade done by OTA (and because of that, the lock status can't be correctly determined by bootloader anymore).
All you have to do to fix it is to extract the gpt partition from the latest att OTA update and flash it via fastboot.
(I assume that you've been on the second aka latest 4.1.1 update from att [98.5.38], then downgraded to 4.0.4 by fxz while skipping gpt and tz flash, then took ota to the first 4.1.1 att update [98.4.20], resulting in downgraded gpt, because the actual gpt on your device before you took the ota was the newer one from the second 4.1.1 att ota [98.5.38].)
EDIT:
The latest att ota is attached to this post: http://forum.xda-developers.com/showpost.php?p=52657363&postcount=13
Extract gpt_main0.bin from the zip and flash it:
Code:
fastboot flash partition gpt_main0.bin
Click to expand...
Click to collapse
Thank you, you're a life saver! Re-learning everything about the AHD, got it for another 2 years.
Related
I noticed on an unlocked bootloader, I can't downgrade the bootloader or gpt.bin (these are the only ones i checked once i read in another post about this). Can anyone explain why or how to do this? What is gpt.bin???
Kind of related - if the AT&T and Verizon locked BL 4.4 versions can downgrade, why can't I with an unlocked BL? It makes me feel cheated.. unless I'm not understanding something correctly...
mohlsen8 said:
I noticed on an unlocked bootloader, I can't downgrade the bootloader or gpt.bin (these are the only ones i checked once i read in another post about this). Can anyone explain why or how to do this? What is gpt.bin???
Kind of related - if the AT&T and Verizon locked BL 4.4 versions can downgrade, why can't I with an unlocked BL? It makes me feel cheated.. unless I'm not understanding something correctly...
Click to expand...
Click to collapse
actually, after playing with it for a while now, i was able to downgrade from 4.4 to 4.2 (camera update) using RSD Lite and the leaked firmware. using fastboot commands themselves doesn't work. it's weird.
i'd still love to know why we can't downgrade the bootloader and some other files on unlocked dev editions.
mohlsen8 said:
actually, after playing with it for a while now, i was able to downgrade from 4.4 to 4.2 (camera update) using RSD Lite and the leaked firmware. using fastboot commands themselves doesn't work. it's weird.
i'd still love to know why we can't downgrade the bootloader and some other files on unlocked dev editions.
Click to expand...
Click to collapse
you can. end of story. don't know what you read or what you are personally doing wrong that isn't allowing you to downgrade your device. but you most definitely can do this. there is nothing that you can't do with an unlocked bootloader.
jayboyyyy said:
you can. end of story. don't know what you read or what you are personally doing wrong that isn't allowing you to downgrade your device. but you most definitely can do this. there is nothing that you can't do with an unlocked bootloader.
Click to expand...
Click to collapse
This is absolutely correct!
jayboyyyy said:
you can. end of story. don't know what you read or what you are personally doing wrong that isn't allowing you to downgrade your device. but you most definitely can do this. there is nothing that you can't do with an unlocked bootloader.
Click to expand...
Click to collapse
there's a couple places i've seen this. and my bootloader is unlocked, and i can't downgrade, for instance, to the bootloader from the original t-mobile software (4.2.2 pre-camera) - this file, just to clarify (from sbf droid developers): TMO_XT1053_4.2.2-13.9.0Q2.X-116-X-17-6_CFC.xml.zip. i take the motoboot.img out and use "fastboot flash motoboot motoboot.img". i get:
(bootloader) Preflash validation failed
phone display says:
Failed to hab check for tz: 0x4e
?
while we're discussing, motorola says these can be relocked. in all of my screwing around this morning i was trying this too. i followed all directions and still cannot lock the phone. i use "fastboot oem lock" and it tells me:
(bootloader) FAIL: Please run fastboot oem lock begin first!
ok, so i use "fastboot oem lock begin". now it gives me:
(bootloader) Ready to flash signed images
ok, try "fastboot oem lock" again and then it gives me:
(bootloader) Re-Lock Failure. See Display
display says "No valid PIV block in SP for system piv validation failed (system) Re-lock failure".
i've tried many times to flash all stock files back to the phone using fastboot, as well as RDS Lite, and it's been successful each time, but it won't re-lock. i've also tried "fastboot oem lock begin" then flashing all the stock files, then "fastboot oem lock". still, no dice. what's up with this?
The updated bootloader isn't let you flash older files. If you flash a full package it will downgrade the bootloader first and then you can flash the other older files. If you use a program such as rsdlite it will handle it all for you.
Steve-x said:
The updated bootloader isn't let you flash older files. If you flash a full package it will downgrade the bootloader first and then you can flash the other older files. If you use a program such as rsdlite it will handle it all for you.
Click to expand...
Click to collapse
so if i flashed the entire 4.2.2 pre-camera file through RSD Lite, it would downgrade the bootloader as part of that? why am i not allowed to do this in fastboot manually?
mohlsen8 said:
so if i flashed the entire 4.2.2 pre-camera file through RSD Lite, it would downgrade the bootloader as part of that? why am i not allowed to do this in fastboot manually?
Click to expand...
Click to collapse
Yes, it would downgrade the bootloader.
You can do it with fastboot manually but you need to do it in the proper sequence is all.
Steve-x said:
Yes, it would downgrade the bootloader.
You can do it with fastboot manually but you need to do it in the proper sequence is all.
Click to expand...
Click to collapse
really? i had no idea that sequence mattered. why would that matter if i have an unlocked bootloader and want to flash an older one onto the device?
i just tried running the 4.2.2 pre-camera file through rsd lite (after removing the getvar line as usual) and it fails on 2/16 (flashing gpt.bin). screen says "downgraded security version. update gpt_main version failed. preflash validation failed for GPT".
i don't understand why it won't work for me and i really would love to understand all of this.
mohlsen8 said:
really? i had no idea that sequence mattered.
i just tried running the 4.2.2 pre-camera file through rsd lite (after removing the getvar line as usual) and it fails on 2/16 (flashing gpt.bin). screen says "downgraded security version. update gpt_main version failed. preflash validation failed for GPT".
i don't understand why it won't work for me and i really would love to understand all of this.
Click to expand...
Click to collapse
to me happens the same, shouls we first downgrade bootloader and recovery before using GPT, maybe our version of RSD lite is not the same?
beelzebu said:
to me happens the same, shouls we first downgrade bootloader and recovery before using GPT, maybe our version of RSD lite is not the same?
Click to expand...
Click to collapse
i have 6.14. going to install 6.15 now and try.
edit: 6.15 does the same thing. won't flash 4.2.2 pre-camera through RSD Lite because of the downgraded security error on GPT.bin.
mohlsen8 said:
i have 6.14. going to install 6.15 now and try.
edit: 6.15 does the same thing. won't flash 4.2.2 pre-camera through RSD Lite because of the downgraded security error on GPT.bin.
Click to expand...
Click to collapse
Had the same issue with downgrading from the camera ota to the pre camera sbf file, rsdlite wouldn't flash got.bin failed, I think it possibly the ota that prevents downgrading, but if you flash from one sbf file and downgrade you're OK, I haven't tried it, just a thought
Sent on my Moto X
flashallthetime said:
Had the same issue with downgrading from the camera ota to the pre camera sbf file, rsdlite wouldn't flash got.bin failed, I think it possibly the ota that prevents downgrading, but if you flash from one sbf file and downgrade you're OK, I haven't tried it, just a thought
Sent on my Moto X
Click to expand...
Click to collapse
Are you saying you were able to flash the pre-camera sbf? edit: sorry - didn't read you right at first. i have tried it through rsd lite and no go.
I don't actually want to go back to that.. just want to know what the deal is with my "unlocked" bootloader. what i think is that the bootloader cannot be downgraded (and then gpt.bin and stuff subsequently cannot be). Someone pulled an oopsie with the 4.4 update because even the AT&T/Verizon versions can downgrade, so we can downgrade that but not to the pre-camera one.
I'm just used to nexuses where i can fastboot flash whatever i want whenever i want. i would just love clarification just to know what the deal is.
mohlsen8 said:
Are you saying you were able to flash the pre-camera sbf? edit: sorry - see you said you didn't try this. i have tried it through rsd lite and no go.
I don't actually want to go back to that.. just want to know what the deal is with my "unlocked" bootloader. what i think is that the bootloader cannot be downgraded (and then gpt.bin and stuff subsequently cannot be). Someone pulled an oopsie with the 4.4 update because even the AT&T/Verizon versions can downgrade, so we can downgrade that but not to the pre-camera one.
I'm just used to nexuses where i can fastboot flash whatever i want whenever i want. i would just love clarification just to know what the deal is.
Click to expand...
Click to collapse
No I couldn't flash the pre camera sbf firmware after accepting the camera fix through ota, I believe flashing the ota flashes something that's prevents you from downgrading. You could try inserting the camera fix gpt.bin file into the pre camera sbf file and see if it flashes ?don't know if it will work
Sent on my Moto X
flashallthetime said:
No I couldn't flash the pre camera sbf firmware after accepting the camera fix through ota, I believe flashing the ota flashes something that's prevents you from downgrading. You could try inserting the camera fix gpt.bin file into the pre camera sbf file and see if it flashes ?don't know if it will work
Sent on my Moto X
Click to expand...
Click to collapse
at that point i could easily just flash everything other than gpt.bin and motoboot. i was hopping around on some of them today just to check it out. it's those two that are the issue.
mohlsen8 said:
at that point i could easily just flash everything other than gpt.bin and motoboot. i was hopping around on some of them today just to check it out. it's those two that are the issue.
Click to expand...
Click to collapse
now that's interesting. figured i'd try it anyway, so in the pre-camera SBF file i replaced gpt.bin with the post-camera gpt.bin and it flashes fine through rsd lite, motoboot and all. what the hell.
I think you can downgrade to any version. Check out the xml file for the order of operations. You will see some of them flash a few parts, then reboot the phone, and then continue with the flashing process. Others flash everything one partition after the other. I believe that reboot is vital for certain downgrades.
Steve-x said:
I think you can downgrade to any version. Check out the xml file for the order of operations. You will see some of them flash a few parts, then reboot the phone, and then continue with the flashing process. Others flash everything one partition after the other. I believe that reboot is vital for certain downgrades.
Click to expand...
Click to collapse
i thought that as well and compared the two 4.2.2 xml's and did not find any real differences like that. not to mention gpt.bin is the first thing flashed and it fails when it tries to flash it. i'd like to know if anyone is or was able to directly flash 4.2.2 pre-camera without replacing the gpt.bin or motoboot.
mohlsen8 said:
i thought that as well and compared the two 4.2.2 xml's and did not find any real differences like that. not to mention gpt.bin is the first thing flashed and it fails when it tries to flash it. i'd like to know if anyone is or was able to directly flash 4.2.2 pre-camera without replacing the gpt.bin or motoboot.
Click to expand...
Click to collapse
i would assume that your issue is coming from flashing OTAs that are not specific for dev phones (don't even know if dev phone OTAs are available). Im not certain of all of this, but when you flash the same OTA that a non-dev phone uses, it will still impliment the security checks to not let you downgrade even though your bootlader is unlocked. Perhaps you may need to unlock the bootloader again (even though it says it is unlocked). Again, i don't actually know this to be true, but I would assume that there is an error somewhere in some code that is relocking (or something like that) a dev phone that flashes the OTAs that are coming out. A nexus wouldn't ahve this problem because none of their OTAs are ever locked anyway (i believe). So the problem is probably with Verizon not releasing a different OTA for unlocked dev phones as opposed to consumer editions.
Im just speculating. Im sure you can find the answer on google if you read up about what unlocking the bootloader actually means.
jayboyyyy said:
i would assume that your issue is coming from flashing OTAs that are not specific for dev phones (don't even know if dev phone OTAs are available). Im not certain of all of this, but when you flash the same OTA that a non-dev phone uses, it will still impliment the security checks to not let you downgrade even though your bootlader is unlocked. Perhaps you may need to unlock the bootloader again (even though it says it is unlocked). Again, i don't actually know this to be true, but I would assume that there is an error somewhere in some code that is relocking (or something like that) a dev phone that flashes the OTAs that are coming out. A nexus wouldn't ahve this problem because none of their OTAs are ever locked anyway (i believe). So the problem is probably with Verizon not releasing a different OTA for unlocked dev phones as opposed to consumer editions.
Im just speculating. Im sure you can find the answer on google if you read up about what unlocking the bootloader actually means.
Click to expand...
Click to collapse
is that a dig? you don't have to be a jerk. i'm not some idiot pressing buttons over here. just asking if anyone knows why this is.
this is for t-mobile. but i have a gsm dev edition, same model as t-mobile etc. even the official firmware files for the GSM Developer Edition, that i downloaded directly from Motorola themselves, are labeled "T-MOBILE RETAIL..". i don't think the dev edition ever had the pre-camera version (it shipped with the update applied). so maybe you're right about that. i dunno. i'm not the only one who's reporting this. i was just really curious to know why this is.
Hello,
It had the original rom 4.4 on my XT1058 with root and unlocked bootloader, but was not getting running with 4.4.2 update for the original recovery. So I was going to be able to update and run fasthall.bat back to 4.2.2, but I opened the file and rebooted the machine to backup and forgot that it was open. Result: ****ed me.
I believe I have lost my bootloader, but following the tutorial of Gundabolu SC, unable to enter fastboot again, however, I can not run the sbf or RSD by flashall.bat.
I noticed that my phone with this LOCKED status, though I unlocked it.
To start the fastboot I run the code the tutorial I mentioned above, then it displays the following screen
Code:
[COLOR="Red"]Failed to hab check for gpt_main: 0x4e
CID Read Failure
Invalid CID Status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP Partition found[/COLOR]
[COLOR="DarkOrange"]Fastboot Reason: Invalid CID[/COLOR]
For both methods to recovery, it becomes part of gpt.bin and when arrives at motoboot, of the following error message:
Code:
[COLOR="DarkOrange"]getvar max-download-size
downloading 32768 bytes
done
getvar max-download-size
downloading 1643008 bytes[/COLOR]
[COLOR="Red"]downgraded security version
update aboot version failed[/COLOR]
Can anyone help me?
------------
Problem solved thanks to XDA's amazing users!
feelknOck said:
Hello,
It had the original rom 4.4 on my XT1058 with root and unlocked bootloader, but was not getting running with 4.4.2 update for the original recovery. So I was going to be able to update and run fasthall.bat back to 4.2.2, but I opened the file and rebooted the machine to backup and forgot that it was open. Result: ****ed me.
I believe I have lost my bootloader, but following the tutorial of Gundabolu SC, unable to enter fastboot again, however, I can not run the sbf or RSD by flashall.bat.
For both methods, it becomes part of gpt.bin and when arrives at motoboot, of the following error message:
Code:
downgraded security version
aboot version update failed
Can anyone help me?
Click to expand...
Click to collapse
You can try go to this link Hope it helps
http://forums.androidcentral.com/mo...7371-unroot-unbrick-your-phone-using-sbf.html
---------- Post added at 04:31 PM ---------- Previous post was at 04:18 PM ----------
Did it worked??S i am too not quite sure about this??
manav113 said:
You can try go to this link Hope it helps
http://forums.androidcentral.com/mo...7371-unroot-unbrick-your-phone-using-sbf.html
Click to expand...
Click to collapse
I tried to recover via RSD several times, both with 4.4, as 4.2.2, but both have the same error.
In the RSD panel the following error message:
Code:
Failed flash process. 2/13 flash mootboot "motoboot.img" -> Phone returned FAIL.
quite a different error.NEVER heard of it>Wait let me ask my friends about it..
manav113 said:
quite a different error.NEVER heard of it>Wait let me ask my friends about it..
Click to expand...
Click to collapse
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
dray_jr said:
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
Click to expand...
Click to collapse
I'm downloading and post the result. 202 KB/s
Thank you!
-
dray_jr said:
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
Click to expand...
Click to collapse
Sorry for double post there.
I remember that my device is the XT1058, but Brazil.
I downloaded the sbf, removed the max-download-size and run the RSD, but he brought me the same errors.
Sounds like you need to wait for the full 4.4.2 Brazil image to be posted for download to recover the phone.
Steve-x said:
Sounds like you need to wait for the full 4.4.2 Brazil image to be posted for download to recover the phone.
Click to expand...
Click to collapse
Excuse me, but why do you think?
I did not get to install 4.4.2, I started to run the script flashall.bat 4.2.2 and thinking it would give time, it ended up damaging the bootloader.
Tried the firm indicated that dray_jr and 2 BR's, but it did not work.
I am very worried.
Did you try this, sounds like your trying to flash 4.2.2 firmware over 4.4.2 which won't work http://forum.xda-developers.com/showthread.php?t=2628940
Sent on my Gummy running Lenoto X
Do you get the "downgraded security version" error when trying to flash 4.2.2 and 4.4 ?
flashallthetime said:
Did you try this, sounds like your trying to flash 4.2.2 firmware over 4.4.2 which won't work http://forum.xda-developers.com/showthread.php?t=2628940
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
I was going to try and probably would work (I've done this several times and has no secret), but it was not to start. I opened flashall.bat script but forgot to close it, because it was going back up yet, but the script detected the fastboot and started the process.
With seconds I removed the cable, barely gave it to start the first stage (before I left without turning back) and corrupted my bootloader.
I had the Original ROM 4.4 installed with root and unlocked bootloader, but even trying the 4.4 firmware I get the errors I described above.
Would have something to do with the tutorial I follow to start the fastboot?
I am Brazilian and even translating and reading what little I understand, I can not identify a problem as well. I'm scouring all here and trying something, but like I said, I am a layman and do not understand how the bootloader and related work.
Steve-x said:
Do you get the "downgraded security version" error when trying to flash 4.2.2 and 4.4 ?
Click to expand...
Click to collapse
With 2 firmwares I get the same error.
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
dray_jr said:
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
Click to expand...
Click to collapse
He removed the cable as it was flashing, can you get to the fastboot screen?
Sent on my Gummy running Lenoto X
dray_jr said:
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
Click to expand...
Click to collapse
1. Yes, I was running 4.4 with unlocked bootloader and rooted
2. I installed the original recovery to try the OTA update for version 4.4.2, but he returned me error halfway through the update, because my ROM was modified. That's when I thought of going back to 4.2.2 without changes and run the 4.4.2.
3. My device is the XT1058 Retail Brazil.
flashallthetime said:
He removed the cable as it was flashing, can you get to the fastboot screen?
Click to expand...
Click to collapse
Yes, I can start the fastboot via script "qflash.exe with (PORT NUMBER)-ramload MPRG8960.hex-mbn 33 MSM8960_bootloader_singleimage.bin-v-o" with a blank bootloader.
feelknOck said:
1. Yes, I was running 4.4 and unlocked bootloader routed.
2. I installed the original recovery to try the OTA update for version 4.4.2, but he returned me error halfway through the update, because my ROM was modified. That's when I thought of going back to 4.2.2 without changes and run the 4.4.2.
3. My device is the XT1058 Retail Brazil.
Yes, I can start the fastboot via script "qflash.exe with (PORT NUMBER)-ramload MPRG8960.hex-mbn 33 MSM8960_bootloader_singleimage.bin-v-o" with a blank bootloader.
Click to expand...
Click to collapse
ok if i remember well first flash recovery from 4.4 firmware
mfastboot flash recovery recovery.img
after then u ll be able to flash entire image of 4.4.2
could it be that even thou the 4.4.2 update failed that it still installed the new bootloader and that is why nothing else will install.
but either way he could flash the 4.4 firmware without the gpt file and then take the OTA and everything should be fine.
danger2u said:
ok if i remember well first flash recovery from 4.4 firmware
mfastboot flash recovery recovery.img
after then u ll be able to flash entire image of 4.4.2
Click to expand...
Click to collapse
Before having this problem I tried all that.
I installed the original recovery and tried to upgrade to 4.4.2 but it gave error in the middle of the update and restarted the phone saying that the software update was not completed.
dray_jr said:
could it be that even thou the 4.4.2 update failed that it still installed the new bootloader and that is why nothing else will install.
but either way he could flash the 4.4 firmware without the gpt file and then take the OTA and everything should be fine.
Click to expand...
Click to collapse
I will remove the line from gpt and try again.
Earlier I was testing at work and now I'm home. The 4.4 firmware download this lingering: (
you really can't cause anymore problems so this is what i would try because from what i have read if you try to install 4.2.2 or 4.4 you the a gpt.bin verification error. which means that neither 4.2.2 or 4.4 are the right bootloader.
That leaves us with some how the 4.4.2 bootloader got installed because it is the only bootloader that can't go to 4.4 so with that being said.
I would download the correct 4.4 firmware for your phone.
extract it
and use the below adb commands to install it but leave out the gpt.bin flash command
Code:
*leave this one out*fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
i think everything should install fine and your phone should boot up and from what i have read you should still be able to take the 4.4.2 OTA without bricking your phone
Hi
I have been playing around with my Atrix HD for quite a while now, installing almost all custom roms out there for MB866 (Found Gummy and Carbon to be the best, batakang and holoblur never worked for me).
Restored back to stock using RSD Lite many times (after editing the xml file, no problems)
The bootloader was of course unlocked during "all that".
Now here is the problem. After restoring to stock 4.1.1 (98.4.20.MB886.ATT.en.US) using RSD Lite, I updated to 98.5.38.MB886.ATT.en.US (small 6.2 MB Update recently released).Worked fine till here.
Then I downgraded to ICS and it also worked fine. What made things worse was when I checked for updates via About Phone--> System Updates and it prompted for an Update 98.4.20.MB886.ATT.en.US (the same i used to flash via RSD). But when the download finished, the phone is permanently stuck in fastboot mode with the following message:
----------------------------------------------
AP Fastboot Flash Mode (s)
10.9B(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code:0
Battery OK
Transfer Mode: USB Connected
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID Status 0x69
No SP Partition found
Fastboot Reason: Invalid GPT
----------------------------------------------
You can see the phone is locked and RSD Lite doesent work at all giving "phone returmed fail" or " invalid partition error (battery is charged atleast 70%).
Any help in restoring the phone to "something" will be highly appreciated.
One of the problem is that i cannot find stock files for the latest 98.5.38.MB886.ATT.en.US update anywhere
Secondly is there any way to unlock Bootloader in fastboot?
capricorn85 said:
Hi
I have been playing around with my Atrix HD for quite a while now, installing almost all custom roms out there for MB866 (Found Gummy and Carbon to be the best, batakang and holoblur never worked for me).
Restored back to stock using RSD Lite many times (after editing the xml file, no problems)
The bootloader was of course unlocked during "all that".
Now here is the problem. After restoring to stock 4.1.1 (98.4.20.MB886.ATT.en.US) using RSD Lite, I updated to 98.5.38.MB886.ATT.en.US (small 6.2 MB Update recently released).Worked fine till here.
Then I downgraded to ICS and it also worked fine. What made things worse was when I checked for updates via About Phone--> System Updates and it prompted for an Update 98.4.20.MB886.ATT.en.US (the same i used to flash via RSD). But when the download finished, the phone is permanently stuck in fastboot mode with the following message:
----------------------------------------------
AP Fastboot Flash Mode (s)
10.9B(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code:0
Battery OK
Transfer Mode: USB Connected
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID Status 0x69
No SP Partition found
Fastboot Reason: Invalid GPT
----------------------------------------------
You can see the phone is locked and RSD Lite doesent work at all giving "phone returmed fail" or " invalid partition error (battery is charged atleast 70%).
Any help in restoring the phone to "something" will be highly appreciated.
One of the problem is that i cannot find stock files for the latest 98.5.38.MB886.ATT.en.US update anywhere
Secondly is there any way to unlock Bootloader in fastboot?
Click to expand...
Click to collapse
"fastboot oem fb_mode_clear" should get it to stop booting into fastboot mode
The problem is the gpt partition is security locked and one of the fastboot commands thrown is to lock the phone into fastboot mode for every boot until the flashes are done. The command above is the one used to revert the first one (fastboot oem fb_mode_set if you're curious). Your bootloader isn't, or shouldn't I should say, locked again. The RAZR HD does the same thing if you directly flash a fastboot without removing the bad partitions and commands for unlocked phones flashing non-stock fastboots. The bad ones are the gpt partition and the oem fb* commands....there are a lot of guides that explain this and Mythtools (in AHD Developer forums) will do it all for you.
skeevydude said:
"fastboot oem fb_mode_clear" should get it to stop booting into fastboot mode
The problem is the gpt partition is security locked and one of the fastboot commands thrown is to lock the phone into fastboot mode for every boot until the flashes are done. The command above is the one used to revert the first one (fastboot oem fb_mode_set if you're curious). Your bootloader isn't, or shouldn't I should say, locked again. The RAZR HD does the same thing if you directly flash a fastboot without removing the bad partitions and commands for unlocked phones flashing non-stock fastboots. The bad ones are the gpt partition and the oem fb* commands....there are a lot of guides that explain this and Mythtools (in AHD Developer forums) will do it all for you.
Click to expand...
Click to collapse
fastboot oem fb_mode_clear doesnt work, i tried it before as well, mythtools also cannt help as device status is locked and if rsd cannt flash it i believe myth also cannt.and the reason i say its locked is because it does not respond to any oem command.
it probably got locked after the ota which failed
if i could find fxz for 98.5.38.MB886.ATT.en.US, it may be restored otherwise is there any way around to unlock bootloder from fastboot??
these are the only two options i can think of amoungst which later is has the least probability.......
capricorn85 said:
fastboot oem fb_mode_clear doesnt work, i tried it before as well, mythtools also cannt help as device status is locked and if rsd cannt flash it i believe myth also cannt.and the reason i say its locked is because it does not respond to any oem command.
it probably got locked after the ota which failed
if i could find fxz for 98.5.38.MB886.ATT.en.US, it may be restored otherwise is there any way around to unlock bootloder from fastboot??
these are the only two options i can think of amoungst which later is has the least probability.......
Click to expand...
Click to collapse
There isn't an fxz for that update yet. The one I would be able to make wouldn't include the correct gpt partition because I've flashed the Nextel fxz and none of the other gpt partitions from our stock fxz's will flash on my phone (there's a security lock on that partition). Though I know that between two or three of us here on xda, an fxz could be made with all the correct partitions from the update.
If you're positive that you were unlocked then just flash the Bell or Nextel 4.1.2 fxz's. They're not vulnerable to the heartbleed exploit which is the main reason that AT&T released the 98.5 update to begin with.
Have you tried "fastboot continue"? You might get lucky and the phone will at least boot up. And tried booting to recovery? Boot menu?
You can only unlock the bootloader from a rooted, running phone with ADB enabled. Can't do it in recovery or fastboot mode (unless you have a developer edition).
skeevydude said:
There isn't an fxz for that update yet. The one I would be able to make wouldn't include the correct gpt partition because I've flashed the Nextel fxz and none of the other gpt partitions from our stock fxz's will flash on my phone (there's a security lock on that partition). Though I know that between two or three of us here on xda, an fxz could be made with all the correct partitions from the update.
If you're positive that you were unlocked then just flash the Bell or Nextel 4.1.2 fxz's. They're not vulnerable to the heartbleed exploit which is the main reason that AT&T released the 98.5 update to begin with.
Have you tried "fastboot continue"? You might get lucky and the phone will at least boot up. And tried booting to recovery? Boot menu?
You can only unlock the bootloader from a rooted, running phone with ADB enabled. Can't do it in recovery or fastboot mode (unless you have a developer edition).
Click to expand...
Click to collapse
i tried bell's 4.1.2 earlier thinking the same as you said,but didnt work either, wont boot to recovery or boot menu.....
fastboot continue also takes to the old prompt...
capricorn85 said:
i tried bell's 4.1.2 earlier thinking the same as you said,but didnt work either, wont boot to recovery or boot menu.....
fastboot continue also takes to the old prompt...
Click to expand...
Click to collapse
IIRC, the Nextel (Mex Retail) is the highest version we have unless the new AT&T one supersedes it.
I've only seen this issue one other time over at the RAZR HD forums. With the latest KK OTA they had, his failed and the phone booted to a similar screen you have. Nothing has worked for that guy yet that I'm aware of (haven't checked in about a week now).
Have you tried manually flashing an fxz, not with RSD or Myth (though Myth does flash manually via a script but it skips the gpt partition, IIRC). I'd start with the ATT fxz and if it fails manually then I'd flash the Nextel one...after that I'm out of ideas.
skeevydude said:
IIRC, the Nextel (Mex Retail) is the highest version we have unless the new AT&T one supersedes it.
I've only seen this issue one other time over at the RAZR HD forums. With the latest KK OTA they had, his failed and the phone booted to a similar screen you have. Nothing has worked for that guy yet that I'm aware of (haven't checked in about a week now).
Have you tried manually flashing an fxz, not with RSD or Myth (though Myth does flash manually via a script but it skips the gpt partition, IIRC). I'd start with the ATT fxz and if it fails manually then I'd flash the Nextel one...after that I'm out of ideas.
Click to expand...
Click to collapse
Came here after trying all that
Tried manually flashing but the phone returns FAIL on EVERY command, same with myth tools it executes but nothing really happen in the phone, dont know what went so wrong with the OTA
i am just confused if i should let it be or keep trying until i find a solution
COuld battery charge level be the problem, when it all started it was more than 70 percent and i didnt keep it on for long. it says battery ok but dont know whats the exact battery level as fastboot oem battery-status or voltage level are also restricted
Well, it seems that skeevydude told you all I want to say
Solved: Using Nextel (Mex Retail)
Thanks all for your replies
The device is alive now after restoring to Mexican Retail using RSD (editing the xml file and deleting ONLY the two lines having getvar)
Myth Tools never worked, RSD DID!
BTW the mexican retail is much much better than the ATT version because:
It gets rid of the ATT bloatware
SPecially the att address book
Hotspot is working out of the box
its speedier
android version is upgraded (4.1.2 instead of 4.1.1)
provides an option of manually switching to 2g/3g
and much more
thanks skeevydude, nextel was the last option remaining anyway...........and it automatically fixed the gpr issue
capricorn85 said:
Thanks all for your replies
The device is alive now after restoring to Mexican Retail using RSD (editing the xml file and deleting ONLY the two lines having getvar)
Myth Tools never worked, RSD DID!
BTW the mexican retail is much much better than the ATT version because:
It gets rid of the ATT bloatware
SPecially the att address book
Hotspot is working out of the box
its speedier
android version is upgraded (4.1.2 instead of 4.1.1)
provides an option of manually switching to 2g/3g
and much more
thanks skeevydude, nextel was the last option remaining anyway...........and it automatically fixed the gpr issue
Click to expand...
Click to collapse
Isn't it already stated somewhere that if you are going to downgrade or change versions, you need to delete those lines anyways?
palmbeach05 said:
Isn't it already stated somewhere that if you are going to downgrade or change versions, you need to delete those lines anyways?
Click to expand...
Click to collapse
Yes it is, but thats only for upgrade, if downgrading the gpt line also need to be deleted, as i was not downgrading, only those two were required to be deleted which need to be specifically mentioned to avoid confusion
capricorn85 said:
Yes it is, but thats only for upgrade, if downgrading the gpt line also need to be deleted, as i was not downgrading, only those two were required to be deleted which need to be specifically mentioned to avoid confusion
Click to expand...
Click to collapse
I told ya Mex Retail would work....
skeevydude said:
I told ya Mex Retail would work....
Click to expand...
Click to collapse
It is worth a shot for me too!
I have RSDLite and attempted to flash. It gives me error about unknown <getvar>. Deleted those line(s) according to another post I found.
Then everything passes but I am stuck on the Fastboot Flash Mode?
God I will be happy when uncle same gets through with my son so he can help is ole man, lol.
---------- Post added at 06:14 PM ---------- Previous post was at 05:55 PM ----------
PROGRESS! I recalled skeevydude saying to stay alway from front USB ports and moved to back one and I now also have the Mex Retail version working. What a relief.
Now the bearing question is should I move on to another version like carbon or holoblur?
If ok to stay with this version, meaning will NOT get busted out by AT&T by using hotspot?
What do you recommend skeevydude?
Thank you so so so much.
Woody
Mexico Retail link
can someone provide me any link of Mexico Retail stock rom? Please.
ErickST18 said:
can someone provide me any link of Mexico Retail stock rom? Please.
Click to expand...
Click to collapse
http://sbf.droid-developers.org/phone.php?device=7
quasihellfish said:
http://sbf.droid-developers.org/phone.php?device=7
Click to expand...
Click to collapse
Thanks man
Pleas hlep me for alive my set thanks advance
dear i have a working phone MB886 with jellybean 4.1.1 unfortunately i flash the custom ROM of kitkat but set is dead i tired to alive the phone with myth tools rsd lite but no success my phone boot-loader locked i try to unlock the boot loader but nothing please anybody send ma working link of flash file Mexican or any other which are flash with rsd lite easily i am very thankful of that plzzzzzzzzzzz customer on my neck sorry for my bad English
shamshadhashmi said:
dear i have a working phone MB886 with jellybean 4.1.1 unfortunately i flash the custom ROM of kitkat but set is dead i tired to alive the phone with myth tools rsd lite but no success my phone boot-loader locked i try to unlock the boot loader but nothing please anybody send ma working link of flash file Mexican or any other which are flash with rsd lite easily i am very thankful of that plzzzzzzzzzzz customer on my neck sorry for my bad English
Click to expand...
Click to collapse
Please stop whining and being pathetic and actually search for moto sbf files. A new site popped up and comes up very easily. No need to make us die of laughter at someone begging for an sbf like a guy begging to get with a girl b/c he's thirsty. Smh lol
Sent from my ATRIX HD using XDA Free mobile app
need working link of file
i search everywhere but no file found i need file if anybody have so please share with me or upload thanks
quasihellfish said:
http://sbf.droid-developers.org/phone.php?device=7
Click to expand...
Click to collapse
Need 4.1.1..where can I find it? Tyvm
Hello,
Please help me get any OS back to my XT1053 for now. Here's what happened:
1) I unlocked the bootloader, rooted my XT1053, stock recovery. Then last week I tried updating it to 5.1 official version via OTA. It failed due to files mismatch (maybe due to using apps that need root like Adaway). So I downloaded 4.4.4 STOCK version from Moto website, flashed boot.img, system.img and followed all the steps given here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
Once the phone booted properly into 4.4.4, I tried 5.1 OTA and it worked fine. Then I flashed TWRP and SU to get root (I lost root when I flashed STOCK 4.4.4).
2) Everything was fine except that whenever I rebooted, my phone would Optimize ALL the apps. I Googled a lot and apparently this happened to many folks and there was no solution.
3) Today, I thought I will try and fix it by sideloading the 5.1 OTA zip (I thought the regular OTA style installation that I did of 5.1 over mfastboot style installation of 4.4.4 had something to do with it. I know, this was stupid of me!)
4) So, today I went to TWRP and tried to flash 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip'. I am 100% certain that this was the file that I copied from /cache after OTA had downloaded the file last week and I had saved it locally on PC and in SD on phone. However, this flashing gave me an error saying that it expected either 4.4.4 KXA or 5.1 but that my system was 4.4?? So the flashing failed and my OS is gone. How can I get ANY OS back? Here are the things that I tried so far:
1) Installed RSD Lite and I am downloading XT1053_TMO_RETAIL-US_4.4.4_KXA21.12-L1.29.1_2_cid9_CFC_1FF.xml.zip file from http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1 as I type this out now. HOWEVER, I think I shouldn't use it as I read KidJoe saying not to downgrade. (KidJoe's comments are here http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347)
2) THEREFORE, I was wondering if I could simply flash a higher or equivalent version of ROM. Since we don't have an official 5.1 flashable zip right now, can I use 5.1.1 by CM? It's present here: http://primehowto.com/install-andro...le-moto-x-xt1053-2013-via-cm12-1-nightly-rom/
3) If yes to point# 2 above, I have a small problem. My phone is not detected by 'adb devices; in TWRP recovery mode. My battery is 11%. Could that be the issue?
I KNOW THIS WAS A LONG POST. I JUST WANTED TO GIVE ALL THE INFO. PLEASE HELP ME GET ANY OS ONTO THE PHONE AND THEN I WILL WAIT FOR THE 5.1 SBF TO BE AVAILABLE. THANKS A LOT IN ADVANCE....
here [Official] XT1058_GHOST_RETBR_5.1 FXZ/SBF (Full Rom)uploaded by our fellow user GARUXA
https://doc-10-ak-docs.googleuserco...359/*/0BwcadIv25aK8Tng3SUk2b1k5aVE?e=download
http://forum.xda-developers.com/mot...t1058ghostretbr5-1-fxz-sbf-rom-t3144161/page2
hbenz2008 said:
here [Official] XT1058_GHOST_RETBR_5.1 FXZ/SBF (Full Rom)uploaded by our fellow user GARUXA
https://doc-10-ak-docs.googleuserco...359/*/0BwcadIv25aK8Tng3SUk2b1k5aVE?e=download
http://forum.xda-developers.com/mot...t1058ghostretbr5-1-fxz-sbf-rom-t3144161/page2
Click to expand...
Click to collapse
Thanks for quick response. But I have XT1053.. Can I still use the one that you gave?
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
hbenz2008 said:
Not recommended, hold on a bit. Did try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
No, I didn't try mfastboot of 'gpt' from 5.1 update file 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip'. I don't see an 'mboot' or 'boot' file in it though. I do see 'gpt'. Also, in fastboot mode it says "Charger connected" instead of "USB connected". I think that's due to the low battery too?
hbenz2008 said:
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
Would you know if 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip' file is the OTA 5.1 file? I think that's how the naming convention goes i.e. the name is set to the system version on which it is going to be updated NOT the system version that it will be updated to. I don't know why this flash failed though. I can give you the exact error that I get when I try flashing this if that helps? Thanks!
Shoot the error. If it's security downgrade, again flash gpt and mboot from Ota 5.1.
I will have to verify the name of Ota as its critical info.
hbenz2008 said:
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
When I tried flashing "Blur_Version.213.44.1.ghost_row.Retail.en.US.zip" file (which I still think is the OTA 5.1 zip), I get this error:
Package expects build fingerprint of mototola/ghost_retail/ghost:4.4.4/KXA21.12-L1.29.1/2:user/release-keys or motorola/ghost_retail/ghost:5.1/LPA23.12-15/15:user/release-keys; this device has motorola/ghost_retail/ghost:4.4/13.11.1Q2.X-69-3/51:user/release-keys
This is where I got burned today. The above error wiped out my OS. I was on 5.1, I don't know why it says I have 4.4....
Prolly system mismatch, try only gpt and mboot. What error do u get?
---------- Post added at 09:27 PM ---------- Previous post was at 09:17 PM ----------
BTW your post provided good info. So Ota think u on 4.4.
You flashed only syst and boot to get on 4.4 ,could be where the prob is.
Need to know where img/rom info reside.
Double check the 4.4 files you flashed.
Just thinking out loud..
hbenz2008 said:
Prolly system mismatch, try only gpt and mboot. What error do u get?
---------- Post added at 09:27 PM ---------- Previous post was at 09:17 PM ----------
BTW your post provided good info. So Ota think u on 4.4.
You flashed only syst and boot to get on 4.4 ,could be where the prob is.
Need to know where img/rom info reside.
Double check the 4.4 files you flashed.
Just thinking out loud..
Click to expand...
Click to collapse
What's 'mboot'. There's no such file in the extracted folder of 'blur.....' file that I mentioned earlier. there is 'gpt'. My phone is detected via fastboot now so I can flash but don't know where the 'mboot' is
Hitdroid said:
What's 'mboot'. There's no such file in the extracted folder of 'blur.....' file that I mentioned earlier. there is 'gpt'. My phone is detected via fastboot now so I can flash but don't know where the 'mboot' is
Click to expand...
Click to collapse
Okay, so I fixed it. At least got an OS for now .. This is what I did.. I took a chance and went ahead with these steps:
1) Extracted files from Stock TMO 4.4.4 file 'TMO_RETAIL_XT1053_4.4.4_213.44.1.ghost_row.Retail.en.US_MR4_CFC.tgz' got from Moto website.
2) Modified 'flash.bat' file to have below commands:
SET mfastboot=mfastboot.exe
%mfastboot% getvar max-download-size
%mfastboot% oem fb_mode_set
%mfastboot% flash partition gpt.bin
%mfastboot% flash motoboot motoboot.img
%mfastboot% reboot-bootloader
%mfastboot% flash logo logo.bin
%mfastboot% flash boot boot.img
%mfastboot% flash recovery recovery.img
%mfastboot% flash system system.img
%mfastboot% flash modem NON-HLOS.bin
%mfastboot% erase modemst1
%mfastboot% erase modemst2
%mfastboot% flash fsg fsg.mbn
%mfastboot% erase cache
%mfastboot% reboot
3) It failed with 'partition', 'motoboot', 'logo'. Everything else was successful.
4) My phone booted into 4.4.4 now.
It's funny but I think I have successfully downgraded from 5.1 to 4.4.4... That means, my main system file was never upgraded to 5.1?? It's late and I want a phone for tomorrow so I won't try 5.1 tonight. But it would be great if experts could pitch in. How did I downgrade from 5.1 to 4.4.4?
Anyway, thanks for your help. Your comment about 'gpt' made me think "maybe my phone won't hard brick if I install 4.4.4 again".. and it didn't!
CHEERS!
You can downgrade Fri 5.1 to 4.4 without flashing gpt and mboot. Wait for full 5.1.
Excellent man. Check your bootloader version, it's probably lollipop. So don't take update yet.
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
to check bootloader BL, restart phone in fastboot read menu.
KidJoe got this better covered here
http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202
Hitdroid said:
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Hitdroid said:
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Many try to skip GPT.BIN and MOTOBOOT.IMG... but when you have a version missmatch (gpt/motoboot from one rom, and rest from another), you increase your chance of bricking should you apply an OTA update zip in the future. And you'll likely end up with features not working or extra "bugs" that wouldn't otherwise appear.
For those who say "its safe to downgrade"... I'll point you to -> http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202 and ask you to view the 7 links near the end of the first post as just a few examples.
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Hitdroid said:
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Hitdroid, do you mind sharing your 5.1 OTA file for xt1053.
I'm in the same situation as you. Got 5.1 OTA a few weeks ago, rooted it and installed TWRP. Then I accidentally installed my 4.4.4 backup which erased my 5.1 install.
I just installed CM 5.1 as a stopgap but i'd like to return to near stock so i'm following this thread.
as I thought, you have a 5.1 BL.
Gotta flash manually when sbf/ROM is available
Hitdroid said:
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Because of your bootloader, the safest way is wait for the 5.1 SBF to be posted (since you have an XT1053, it will be posted on Moto's web site, and you don't have to rely on leaks)... But I have no idea how long that will take.
Now, you could try to take the OTA, but I've seen enough bricks to say.. If it was my phone... I'd wait.
I'm at work so will share the file once I go home. But I think we should wait for 5.1 SBF as @KidJoe and @hbenz2008 have stated.
Sent from my XT1053 using XDA Free mobile app
Is there anywhere around to still get the stock firmware files for this device?
all of the sites to download the firmware I'm finding on every tutorial and on xda seem to down.
movielover76 said:
Is there anywhere around to still get the stock firmware files for this device?
all of the sites to download the firmware I'm finding on every tutorial and on xda seem to down.
Click to expand...
Click to collapse
Havent found that still?
Salik Iqbal said:
Havent found that still?
Click to expand...
Click to collapse
Nope
movielover76 said:
Nope
Click to expand...
Click to collapse
Check inbox
Salik - I'm also looking for this, can you hook me up? Thx!
movielover76 said:
Is there anywhere around to still get the stock firmware files for this device?
all of the sites to download the firmware I'm finding on every tutorial and on xda seem to down.
Click to expand...
Click to collapse
try links in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
First off, thanks! - I tried flashing 5.1 using RSD Lite 6.2.4 after updating the latest drivers and following the instructions here: http://forum.xda-developers.com/showpost.php?p=59348530&postcount=6
I'm still getting flash fails:
- downgraded security version
- upgrade gpt_main version failed
- preflash validation failed for GPT
In other, older firmwares' xml files I found more of the lines you mention removing in the file prior to flashing but in the TMO XT1053 5 .1 Ghost Retail, there's only the one referring to the max download size.
Upon attempt to flash 4.4.4 I was able to get rid of the preflash validation warning but got (downgraded security version & update sbl3 version failed). I further researched this problem and also re-flashed stock recovery but to no avail. (Bootloader is unlocked BTW - at least fastboot & bootscreen say so)
At this point, I'm out of options - any other tips you could give me?
getdealtwith99 said:
First off, thanks! - I tried flashing 5.1 using RSD Lite 6.2.4 after updating the latest drivers and following the instructions here: http://forum.xda-developers.com/showpost.php?p=59348530&postcount=6
I'm still getting flash fails:
- downgraded security version
- upgrade gpt_main version failed
- preflash validation failed for GPT
In other, older firmwares' xml files I found more of the lines you mention removing in the file prior to flashing but in the TMO XT1053 5 .1 Ghost Retail, there's only the one referring to the max download size.
Upon attempt to flash 4.4.4 I was able to get rid of the preflash validation warning but got (downgraded security version & update sbl3 version failed). I further researched this problem and also re-flashed stock recovery but to no avail. (Bootloader is unlocked BTW - at least fastboot & bootscreen say so)
At this point, I'm out of options - any other tips you could give me?
Click to expand...
Click to collapse
you cannot downgrade stock firmware unless bootloader is unlocked
Sent from my XT1080 using XDA Labs
sd_shadow said:
you cannot downgrade stock firmware unless bootloader is unlocked
Sent from my XT1080 using XDA Labs
Click to expand...
Click to collapse
As mentioned, bootloader is unlocked - at least per fastboot & the bootscreen. Are you saying that that might be wrong and that the errors RSD Lite is giving me indicate that the bootloader is locked? Thx
getdealtwith99 said:
As mentioned, bootloader is unlocked - at least per fastboot & the bootscreen. Are you saying that that might be wrong and that the errors RSD Lite is giving me indicate that the bootloader is locked? Thx
Click to expand...
Click to collapse
try mfastboot
Sent from my KFFOWI using XDA Labs