[Q] 3G signal full but calls on emergency only. - Sprint HTC One (M8)

Hello, I got a HTC M8 HK unlocked from the following post http://forum.xda-developers.com/showthread.php?t=2718150 3 months ago the phone was working without any issue, then sunddenly the signal went gone and I place the phone on airplane mode then I deactivated it. The signal recovered pretty fine.
Then a couple of days ago the phone refused to receive/send calls only 3G is working, emergency calls are working so I assumed that the GSM antenna is working fine since I was able to place a emergency call.
Im still using the stock ROM 4.4.2 recently I updated the software to 5.0.1 to see if the problem can be fixed but nope... The issue stills there.
So if any one was able to replicate or is having the same issue can guide me in order to recover this.
I'm going to flash the following radio to re-attempt the unlock procedure again.
1.12.651.17 Original Stock ROM
Thanks for reading!
Cheers!

I would run the RUU for the 5.0.1 update to make sure your firmware is up to date. If you only updated your software but not your firmware you're going to have issues. If this doesn't fix your issue I'd try ##72786# from the dialer and do a reset from the menu once it comes up, and, if all else fails, run ##3282# from the dialer and then reset from there. You'll need your MSL code for that last one. You can get your MSL code from Sprint or by using the MSL reader app from the Play store. RUU's can be found in OMJ's RUU thread in the development section.

Hey thanks! I will do that when I arrive home!
The problem will be that I need to get back to 4.4.2 to perform the unlock again, since this is the Harman Kardon edition from the Sprint.
Another thing that is kind of funny that I have full 3G connectivity downloading at 3MB/s
HBOOT: 3.16.0.0000
RADIO: 1.08.20.0610
OS: 1.54.654.15

Magnum_Enforcer said:
I would run the RUU for the 5.0.1 update to make sure your firmware is up to date. If you only updated your software but not your firmware you're going to have issues. If this doesn't fix your issue I'd try ##72786# from the dialer and do a reset from the menu once it comes up, and, if all else fails, run ##3282# from the dialer and then reset from there. You'll need your MSL code for that last one. You can get your MSL code from Sprint or by using the MSL reader app from the Play store. RUU's can be found in OMJ's RUU thread in the development section.
Click to expand...
Click to collapse
Well my friend it didn't work sadly
Now I'm going to try to convert my HK to a simple Sprint M8 to check if the radio versions interfere, I was watching a lot of comments when you change the radio it affects everything, since Sprint only wants to keep them running on their network the modify this one as well. So I will use another version to see what happens.
Regards

akomecr said:
Well my friend it didn't work sadly
Now I'm going to try to convert my HK to a simple Sprint M8 to check if the radio versions interfere, I was watching a lot of comments when you change the radio it affects everything, since Sprint only wants to keep them running on their network the modify this one as well. So I will use another version to see what happens.
Regards
Click to expand...
Click to collapse
Not sure why you'd want to change versions, as the only difference is the ADSP firmware. The radios are the same.

Magnum_Enforcer said:
Not sure why you'd want to change versions, as the only difference is the ADSP firmware. The radios are the same.
Click to expand...
Click to collapse
Well to be honest I'm a noob on this topics, well I converted the device to M8 directly from sprint and the same history only 3G data but no calls, also I modified the settings of the bands with QSPT same result as well. I'm going to migrate to 5.0.1 and follow this: http://forum.xda-developers.com/showpost.php?p=59462305&postcount=4293 to check what happens. I already also changed the nano SIM to the same operator... But it's really curious to me... Why he's able to deliver a emergency call on the GSM network... If the antenna is damaged it should allow this type of calls at all...

Magnum_Enforcer said:
Not sure why you'd want to change versions, as the only difference is the ADSP firmware. The radios are the same.
Click to expand...
Click to collapse
And at the end nothing worked... Only Data is active... No GSM calls... I gave up... XD
Sadly... This phone was only 3 months with me...
Thanks for the help dude!

Related

HTC Vivid Radio/Baseband issue

Hello,
I have searched multiple forums for hours today and have figured out what is going on with my HTC Vivid. (It has been upgraded to AT&T Official ICS.)
It was working fine up until yesterday where it was not receiving a signal from the mobile network and the signal icon has an X through it. The SIM card is properly inserted and another SIM card has been tried as well. Looking through other threads it seems like the Radio RIL files may be missing or corrupt. The IMEI number and *#06# code does not show an IMEI number either. The baseband version says unknown. I am not sure what happened as I have never loaded any other ROM on it.
I downloaded the Official RUU ICS upgrade ROM today and tried reflashing it, with no luck.
What is interesting (and the other person who had the radio problem) is that when I left the phone sit off overnight and then turned it on in the morning, the phone connected to the mobile network and I had a signal. When I restarted the phone, hours later, the phone lost connection to the mobile network and that is when I started digging and found the problem with the baseband version being unknown.
Is there anything anyone can suggest? Can I reflash the baseband files or copy them from someone somehow using ADB? It seems like there is where my problem lays. I've searched for ways on how to downgrade from ICS to the official GB stock rom, but it doesn't seem like it can be accomplished.
(I tried downloading the Holiday Cingular version of the GB stock rom but the update failed. I read about the ICS HBOOT version being different and not allowing it.)
Thank you in advance for helping and any suggestions.
Have you gotten a new sim card yet? That needs to be your first step. My captivate did the same thing and turned out the sim went bad
Sent from my HTC PH39100 using Tapatalk 2
Cor-master said:
Have you gotten a new sim card yet? That needs to be your first step. My captivate did the same thing and turned out the sim went bad
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
Yes I have tried a different sim card. I don't believe thats the issue though being that it worked with the same sim after I let the phone sit overnight. From reading about others experience, it doesn't seem that the sim is the issue but more the baseband version and imei information missing.
centro7710 said:
Hello,
I have searched multiple forums for hours today and have figured out what is going on with my HTC Vivid. (It has been upgraded to AT&T Official ICS.)
It was working fine up until yesterday where it was not receiving a signal from the mobile network and the signal icon has an X through it. The SIM card is properly inserted and another SIM card has been tried as well. Looking through other threads it seems like the Radio RIL files may be missing or corrupt. The IMEI number and *#06# code does not show an IMEI number either. The baseband version says unknown. I am not sure what happened as I have never loaded any other ROM on it.
I downloaded the Official RUU ICS upgrade ROM today and tried reflashing it, with no luck.
What is interesting (and the other person who had the radio problem) is that when I left the phone sit off overnight and then turned it on in the morning, the phone connected to the mobile network and I had a signal. When I restarted the phone, hours later, the phone lost connection to the mobile network and that is when I started digging and found the problem with the baseband version being unknown.
Is there anything anyone can suggest? Can I reflash the baseband files or copy them from someone somehow using ADB? It seems like there is where my problem lays. I've searched for ways on how to downgrade from ICS to the official GB stock rom, but it doesn't seem like it can be accomplished.
(I tried downloading the Holiday Cingular version of the GB stock rom but the update failed. I read about the ICS HBOOT version being different and not allowing it.)
Thank you in advance for helping and any suggestions.
Click to expand...
Click to collapse
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
You can get HBOOTS for both GB and ICS via Hasoons AIO kit
Flash the HBOOT, Flash the Image from Cingular GB RUU and I wish you luck!!!
ayulatins said:
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
You can get HBOOTS for both GB and ICS via Hasoons AIO kit
Flash the HBOOT, Flash the Image from Cingular GB RUU and I wish you luck!!!
Click to expand...
Click to collapse
I found the download link, but the website says they're updating their drives, so who knows how much longer that will take.
Also, are you saying I should just use the tools within the kit to flash the HBOOT back to the previous version compatible with GB and then flash the RUU GB image after? Can I do that with the phone connected via USB or does it have to be flashed from the SD card? If it has to be flashed from the SD card, how do I go about doing that? If it can be done from the phone via USB, does the phone have to be in recovery mode?
I have tried reflashing the ICS RUU multiple times w/ version 3.26.502.52 and 3.26.502.56, both do not fix the issue. Do the baseband and or radio files NOT get flashed within these updates?
Thanks for the response!
centro7710 said:
I tried finding a download link for the AIO kit on the link provided, but I must be blind?
Also, are you saying I should just use the tools within the kit to flash the HBOOT back to the previous version compatible with GB and then flash the RUU GB image after? Can I do that with the phone connected via USB or does it have to be flashed from the SD card? If it has to be flashed from the SD card, how do I go about doing that? If it can be done from the phone via USB, does the phone have to be in recovery mode?
I have tried reflashing the ICS RUU multiple times w/ version 3.26.502.52 and 3.26.502.56, both do not fix the issue. Do the baseband and or radio files NOT get flashed within these updates?
Thanks for the response!
Click to expand...
Click to collapse
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
ayulatins said:
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
Click to expand...
Click to collapse
Thanks for the quick reply.
Your thread was the one I saw earlier with the simliar problem that I am having, only I have not loaded any custom ROMS. The phone just stopped receiving the signal the other day. I am still waiting for the download website to become available to use the tool to perform the flash of HBOOT, however, once I do that, will that erase the ICS rom from my phone? If so, what steps do I have to perform to get it in a "download mode" to accept the AT&T GB RUU? I'm a little confused on that part.
I read your first thread and I am a bit confused on exactly how you were able to correct the baseband/RIL issue (which I am assuming is the root of my issue). Do I have to extract some files from the RUU executable? Are the commands you provided to be used in ADB? I am confused as to what to do with [setprop ro.baseband 3.26.5XXX (<--- mainver: in android-info.txt in RUU.zip)] from your post. If that command is copying a file or just setting information (almost like as a registry setting within Windows) to point to the file or set a version number. Also if the XXX needs to have a certain number.
I thank you for your time and am trying my hardest to understand what to do to accomplish these steps.
centro7710 said:
Thanks for the quick reply.
Your thread was the one I saw earlier with the simliar problem that I am having, only I have not loaded any custom ROMS. The phone just stopped receiving the signal the other day. I am still waiting for the download website to become available to use the tool to perform the flash of HBOOT, however, once I do that, will that erase the ICS rom from my phone? If so, what steps do I have to perform to get it in a "download mode" to accept the AT&T GB RUU? I'm a little confused on that part.
I read your first thread and I am a bit confused on exactly how you were able to correct the baseband/RIL issue (which I am assuming is the root of my issue). Do I have to extract some files from the RUU executable? Are the commands you provided to be used in ADB? I am confused as to what to do with [setprop ro.baseband 3.26.5XXX (<--- mainver: in android-info.txt in RUU.zip)] from your post. If that command is copying a file or just setting information (almost like as a registry setting within Windows) to point to the file or set a version number. Also if the XXX needs to have a certain number.
I thank you for your time and am trying my hardest to understand what to do to accomplish these steps.
Click to expand...
Click to collapse
I did find the extracted files within the RUU executable and found the rom.zip which included the .img files among other files I assume needed as sources to flash the phone. I see a radio.img file would I be able to do anything with that?
Thank you.
centro7710 said:
I did find the extracted files within the RUU executable and found the rom.zip which included the .img files among other files I assume needed as sources to flash the phone. I see a radio.img file would I be able to do anything with that?
Thank you.
Click to expand...
Click to collapse
And I have a question, if the radio/baseband files are included in the RUU flash, what is happening as to why it is not being reflashed, or if it is being reflashed, why it is disabling the mobile network and providing an Unknown version to Baseband and clearing the IMEI number?
ayulatins said:
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
Click to expand...
Click to collapse
Here's where I am:
I successfully unlocked my bootloader, downgraded to GB, rooted. Tried to gain root access through adb terminal but it was not working properly.
I relocked my bootloader. Installed the ICS RUU AT&T ROM update. Unlocked my bootloader, rooted.
I see the commands you ran in your previous post. I am also receiving the same message of N/A when running the getprop ro.baseband
I tried the second command setprop ro.baseband 3.26.5XXX and then restarted the phone. I have tried it as posted, and also with swapping out the version that is located in my android-info.txt file: 3.26.502.56
Still no luck with setting the baseband version. IMEI still is cleared out.
Am I doing something wrong?
ayulatins said:
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
Click to expand...
Click to collapse
Please see my initial quotes above...
All the previous steps I took were only a coincidence (not proven to work)!!!
We may need to contact AT&T to be sure its not a lock IMEI (and I'm wondering why it would be) or an experienced Dev
ayulatins said:
Please see my initial quotes above...
All the previous steps I took were only a coincidence (not proven to work)!!!
We may need to contact AT&T to be sure its not a lock IMEI (and I'm wondering why it would be) or an experienced Dev
Click to expand...
Click to collapse
Hey thanks for all of your suggestions. I contacted AT&T the day everything happened to see if it was on the block list. They said no. I tried multiple things including trying to re-flash the radio, but I was getting a signature failed error that I could not get around. I really think that's what the problem is. I gave up and ended up selling it.
centro7710 said:
Hey thanks for all of your suggestions. I contacted AT&T the day everything happened to see if it was on the block list. They said no. I tried multiple things including trying to re-flash the radio, but I was getting a signature failed error that I could not get around. I really think that's what the problem is. I gave up and ended up selling it, as is, on ebay instead to get a few bucks out of it and getting a new phone.
Click to expand...
Click to collapse
I really wouldn't mind selling mine too if I get a buyer. I'm just tired of all the troubles and no dev is willing to help.
ayulatins said:
I really wouldn't mind selling mine too if I get a buyer. I'm just tired of all the troubles and no dev is willing to help.
Click to expand...
Click to collapse
Exactly. It was my sister's phone. The sh*tty thing is we bought two off of ebay at the same time, 1 for me, 1 for her. Well, her phone was not in the box (either never shipped or stolen) so I had to file a claim through eBay which took 3 weeks to get the money back. Meanwhile, I gave her my phone (which is the phone in reference) to use instead. I bought her an iPhone instead now, along with purchasing one myself. I loved Android, but the bugs and fragmentation is getting too much for me to handle.
Dude, if you don't have an IMEI showing up, something is WAY wrong. That goes beyone the RIL not working... The RIL is probably fine. If your phone doesn't have an IMEI somehow, the cell towers are NOT, NO WAY, NEVER EVER going to register your phone on their network. You can put a billion SIM cards in there, or flash a billion stock ROMS, and if you don't have an IMEI, you will never be able to connect.
Something is probably corrupt or broken in your firmware or the hardware itself. I think your device is probably screwed.
My advice, is follow the steps to put your phone back to stock (including changing the bootloader message back to **LOCKED** and S-ON), and get it back to the phone company. They will be able to tell something is boned on the phone right away since it isn't displaying an IMEI.
Sorry to be the bearer of bad news and for your many wasted hours... But on the plus side, you now know a LOT about flashing and how your phone works now
Good luck with everything man! Hope they get you up and running soon!
I have the same problem as the OP but I have a IMEI showing up and a Basehand But won't connect to AT&T or anything they resent me a Signal & everything it shows a X with no bars it happened after I did a Factory Reset
anyone got the Radio.img?
inick73376 said:
I have the same problem as the OP but I have a IMEI showing up and a Basehand But won't connect to AT&T or anything they resent me a Signal & everything it shows a X with no bars it happened after I did a Factory Reset
Click to expand...
Click to collapse
That's weird..you try creating the apns again? I don't see how a factory reset would do that. Try toggling airplane mode too
Sent from my De-Sensed HTC Vivid using xda premium
I am currently having the same issues right now, it works if i leave the phone off for 1 hr it will work until i reboot then its down again, tried every thing possible, airplane mode will crash, reflashing the radios from gb and ics does nothing, setprop does nothing really. from this point it feels like a hardware issue.
sorry to revive an old thread, i just wanted to know if anyone came across this issue and had it fixed
i will get a log to see if there is errors showing up
Return it.
Sent from my HTC Holiday using Tapatalk 2

[Q] Unrooting HTC One running 3.04.651.2 with hboot 1.55

Hi All ,
My apologies if there is a solution to my problem in another thread. I have spent countless hours looking for a way to unroot my Sprint HTC One because the Sprint network can't seem to activate it until I do. Or I need to figure out a way to force the Sprint network to accept my MDN and MSID which can "sometimes" be problematic with rooted devices. It might be easier to just unroot and see if that helps getting the phone to properly activate.
Other than the network connectivity issues, the phone is fully functional. Just cant make calls or send texts.
I am running this ROM based on benny's system dump: http://forum.xda-developers.com/showthread.php?t=2467607 so my device information is:
Android version - 4.3
Sense version - 5.0
Software version - benny's 4.3
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
I've tried everything I can think of to get my device unrooted, but none of the RUUs work due to being on hboot 1.55 s-on or having an older firmware version (1.29.xx or 1.39.xx.)
Is there any method I can use to get completely back to un-rooted stock rom with, relocked boot loader (know how to do that part), stock recovery, etc?
I've looked at so many different threads and google searches and all say you need to be s-off and run RUUs of versions that will either cause my touch screen to not work or worse. If anyone can help me it would be amazing and I would be much obliged.
I am having similar issues. I'm about to try this method - http://forum.xda-developers.com/showthread.php?t=2470569&page=3 Read OP and see post#27
jharre08 said:
I am having similar issues. I'm about to try this method - http://forum.xda-developers.com/showthread.php?t=2470569&page=3 Read OP and see post#27
Click to expand...
Click to collapse
Ah yes! The 3.04 version wasn't available the last time I read that post! I can confirm that the other that using the 1.29 and 1.31 versions caused serious issues for me and my phone. This post is actually what led me to learn about the issues due to different firmware and file structure between new and older versions.
I'm downloading now. Let me know how it goes!
tuckprodigy said:
Ah yes! The 3.04 version wasn't available the last time I read that post! I can confirm that the other that using the 1.29 and 1.31 versions caused serious issues for me and my phone. This post is actually what led me to learn about the issues due to different firmware and file structure between new and older versions.
I'm downloading now. Let me know how it goes!
Click to expand...
Click to collapse
Also, check this out - http://qbking77.com/development/how-to-unrootunbrick-the-htc-one-to-stock-2/
It's a bit dated, but I am going to try this method if I can find a 3.04 RUU. Note, he is doing this to an S-On phone, which is what we have. So it SHOULD work:good:
Nothing against the first method I posted, but I'd much rather do a RUU and get a clean slate...
There is no RUU for 3.04 yet ( that I know of)...
this is your best (and pretty much only) option: http://forum.xda-developers.com/showpost.php?p=46565593&postcount=27
Did you ever find a way to resolve this issue? Also did this start after flashing Cyanogenmod? I have the exact same issue and it seems I have exhausted all available resources. Currently have the following setup:
Android version - 4.3
Sense version - 5.0
Software version - 3.04.651.2
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
Noticed that the phone is unable to update PRL correctly. Version will switch from 00000 to 1 to 55016. I am also unable to commit changes to any EPST settings (which is the first thing sprint tried to do). MDN and MSID both currently say 'no' and I can't update.
I'm having the exact same issue with everything working fine but no calls/texts.
I flashed the Guru reset for 3.04 but still no calls/text.
Any other solutions?
kindabizzie said:
I'm having the exact same issue with everything working fine but no calls/texts.
I flashed the Guru reset for 3.04 but still no calls/text.
Any other solutions?
Click to expand...
Click to collapse
Try the following:
Full wipe. Flash the newest stable CM.
Go into Settings > More... (under Wireless & Networks) > Mobile networks > CDMA subscription:
Confirm the following settings:
Network mode = LTE/CDMA/EvDo
CDMA subscription = NV
After you confirm these settings, switch the network mode to CDMA/EvDo only and then back to LTE/CDMA/EvDO.and give it a minute or so, you should see 3G/Phone availability come back. You can test this by dialing a number. You should be able to make a call, or at least get the default Sprint "device is not activated" recording. After confirming this, you can do another wipe and flash back to a stock ROM. You should now have mobile network connectivity back. You may need to Activate the phone again and update the profile/PRL to get back to 100%.
jjmckaskie said:
Try the following:
Full wipe. Flash the newest stable CM.
Go into Settings > More... (under Wireless & Networks) > Mobile networks > CDMA subscription:
Confirm the following settings:
Network mode = LTE/CDMA/EvDo
CDMA subscription = NV
After you confirm these settings, switch the network mode to CDMA/EvDo only and then back to LTE/CDMA/EvDO.and give it a minute or so, you should see 3G/Phone availability come back. You can test this by dialing a number. You should be able to make a call, or at least get the default Sprint "device is not activated" recording. After confirming this, you can do another wipe and flash back to a stock ROM. You should now have mobile network connectivity back. You may need to Activate the phone again and update the profile/PRL to get back to 100%.
Click to expand...
Click to collapse
Didn't work man, thanks though. My data is fine, I just can't call/txt...it's really bizarre...
kindabizzie said:
Didn't work man, thanks though. My data is fine, I just can't call/txt...it's really bizarre...
Click to expand...
Click to collapse
Hmm. That's pretty much the issue that I had except 4G/Wifi was working and 3G/Call/Text didnt seem to be. You might try switching the CDMA mode to SIM and then back to NV to make sure the setting takes. I know CM can be really finicky with network changes.
tuckprodigy said:
Hi All ,
My apologies if there is a solution to my problem in another thread. I have spent countless hours looking for a way to unroot my Sprint HTC One because the Sprint network can't seem to activate it until I do. Or I need to figure out a way to force the Sprint network to accept my MDN and MSID which can "sometimes" be problematic with rooted devices. It might be easier to just unroot and see if that helps getting the phone to properly activate.
Other than the network connectivity issues, the phone is fully functional. Just cant make calls or send texts.
I am running this ROM based on benny's system dump: http://forum.xda-developers.com/showthread.php?t=2467607 so my device information is:
Android version - 4.3
Sense version - 5.0
Software version - benny's 4.3
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
I've tried everything I can think of to get my device unrooted, but none of the RUUs work due to being on hboot 1.55 s-on or having an older firmware version (1.29.xx or 1.39.xx.)
Is there any method I can use to get completely back to un-rooted stock rom with, relocked boot loader (know how to do that part), stock recovery, etc?
I've looked at so many different threads and google searches and all say you need to be s-off and run RUUs of versions that will either cause my touch screen to not work or worse. If anyone can help me it would be amazing and I would be much obliged.
Click to expand...
Click to collapse
You may need to flash a stock rom and manually enter you MDN and MSID using the epst menu
no luck
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
tuckprodigy said:
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
Click to expand...
Click to collapse
Dang, and I was gonna go to a Sprint store after work. *Sigh* guess I have NO CHOICE but to get a Nexus 5 now, lololol
kindabizzie said:
Dang, and I was gonna go to a Sprint store after work. *Sigh* guess I have NO CHOICE but to get a Nexus 5 now, lololol
Click to expand...
Click to collapse
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
jjmckaskie said:
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
Click to expand...
Click to collapse
I still took it to Sprint just to see and they fixed it. Downside is my GPS and LTE is messed up again (Me trying to fix those things is the reason all this happened in the first place) but I'd rather not have GPS than not have phone capabilities on my phone (And LTE in Los Angeles is garbage anyway). I think I'm gonna leave my phone alone for a while tho, lol.
jjmckaskie said:
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
Click to expand...
Click to collapse
Looks like I am going to go this route. I hit ##72786# and it takes me to SCRTN screen. I'm guessing I just hit menu in the top right, then reset? Then it will prompt me for my MSL code?
jharre08 said:
Looks like I am going to go this route. I hit ##72786# and it takes me to SCRTN screen. I'm guessing I just hit menu in the top right, then reset? Then it will prompt me for my MSL code?
Click to expand...
Click to collapse
Yup. I actually dont remember if it does a full wipe, or just forces an activation/profile/PRL update. But either way it's worth a shot.
tuckprodigy said:
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
Click to expand...
Click to collapse
Sounds like you solved your issue, but for anyone else having trouble....
I re-tried GURU's reset and it worked. The first time I downloaded it over the 4G network. I also downloaded the OTA over the 4G network. My radio has been giving me fits ever since. Finally, I downloaded GURU's reset over WIFI, then made sure the OTA downloaded over WIFI, and my phone is like new again! No radio issues, everything is perfect. Hope this helps some people...

SimLock Solution For All 4.3 users

Hello to you all
I would like to show all of you 4.3 users the solution "elvisypi" gave me in my private mail and finally i succeed to unlock my device.
So all of us know that sprint or google changed the way HtcOMADM works and we can't use the original system for unlocking our device.
So here is the solution that "elvisypi" gave me :
1. Download the "Stock with goodies 4.3 ROM". Don't flash it wet. (link : http://www.mediafire.com/?9y21d2wlszh6d6c )
2, With an archive viewer like winzip open the ROM.zip and go to /system/app
3. replace 2 apps which I have attached: HtcOMADM_SettingsPlugin_SPCS.apk and HtcOMADM_SPCS.apk. Just drag and drop and replace.
4. Finally flash the ROM.
5. Install the HTCOneSIMUnlockHelper and follow the onscreen instructions.
This system works 100% and this way you can be on 4.3 rom and still have an unlock GSM sprint device.
again , many thanks to "elvisypi" for his great support
sim unlock
Hope it does
downloading....
Would this work with other ROMs like insercoin?
phatmanxxl said:
Would this work with other ROMs like insercoin?
Click to expand...
Click to collapse
You must use a stock rom for this to work
Hey, are you using this with Tmobile or another service?
syedinsane said:
Hey, are you using this with Tmobile or another service?
Click to expand...
Click to collapse
I'm not using t-mobile , I'm not from the US but it should work with any GSM sim after the unlock is done
james341 said:
I'm not using t-mobile , I'm not from the US but it should work with any GSM sim after the unlock is done
Click to expand...
Click to collapse
I've followed your directions, using the ROM you provided (only difference being flashing the root-fix) and I get vDM errors every time I boot and the app says it's unlocked but my Tmobile SIM gets no signal. Is there any other way i can check if my phone's unlocked?
syedinsane said:
I've followed your directions, using the ROM you provided (only difference being flashing the root-fix) and I get vDM errors every time I boot and the app says it's unlocked but my Tmobile SIM gets no signal. Is there any other way i can check if my phone's unlocked?
Click to expand...
Click to collapse
Did you changed the phone in settings to GSM/UMTS?
james341 said:
Did you changed the phone in settings to GSM/UMTS?
Click to expand...
Click to collapse
Yes I have, it says preparing SIM card but I never get any bars. I read in another thread that I need to be on an older radio in order for Tmobile to work. And for that I'll need s-off which I can't. Sigh.
syedinsane said:
Yes I have, it says preparing SIM card but I never get any bars. I read in another thread that I need to be on an older radio in order for Tmobile to work. And for that I'll need s-off which I can't. Sigh.
Click to expand...
Click to collapse
Flash the release radio and let us know, I'm interested in using an At&t card for when I need a good data connection.
[/COLOR]Delete
Sent from my HTCONE using XDA Premium 4 mobile app[/QUOTE]
Sent from my HTCONE using XDA Premium 4 mobile app
It didnt work for me?
I did exactly what you said an When the phone starts up it says unfortunately ui has stop working an it keeps popping up an i cant do anything with my phone
Thank you for this already pressed the Thank you button also
i was getting annoyed that i couldnt find the files before i found this thread
HTC ONE
I did everthing s-off....flashed to the old radio baseband....tried everything still havent got any signal....who know what a problem?
The only thing is that I've flashed my sprint htc one to the Straight talk. Could it cause a problem?
I am also trying to unlock for T-Mobile. Running into the same issues as others. I was reading a thread where someone was apparently using it on T-Mobile, and PMed them on how exactly they did it but never got a response.
Would love to hear if anyone has it working on T-Mobile
This works. :victory:
Only need to extract, modify and zip again.
Flash with TWRP.
And everything is working normally, no need to reinstall or root, or whatever.
The only problem is that every time I turn on the phone, I get the error message VDM, but it disappears instantly, without stopping or forcing any application.
I live outside the U.S., and continues to operate all perfect with SIMUnlockerHelper. :fingers-crossed:
My device: Sprint Htc one = Unlockboot, TWRP, SIMUnlocker Helper, Root, and the rom on the top of the post. (benny's 4.3 LOL)
it actually works, but if you're using a sense rom I think you only need to download the apps in the op and replacing in system/app
I did this with insertcoin 6.0-4, the unlock helper app didn't recognize the rom, but with the terminal emulator method it worked just fine, tried with a sim and all fine ... then put again the original apks and you don't have to deal with any error popups
Interesting. I was under the impression that our version of this device did not support domestic (only international) GSM bands, hardware wise.
Is this version of sim unlocking different than what you would get if you asked Sprint? (they do allow you to unlock it if you meet certain criteria, like good account standing)
cbburtraw said:
Interesting. I was under the impression that our version of this device did not support domestic (only international) GSM bands, hardware wise.
Is this version of sim unlocking different than what you would get if you asked Sprint? (they do allow you to unlock it if you meet certain criteria, like good account standing)
Click to expand...
Click to collapse
it supports the bands, but all the radios except the original one block domestic gsm carriers. if you still unlock and use that radio, it'll work.
Not working
I tried everything mentioned above, ( Unlock bootloader, S-OFF, Root) also changed the 2 apps in the system for the 4.3 ROM Stock rooted deodexed and then used the SIM unlock helper.
Then Got the same result : No GSM signal, and the SPRINT logo still on the top when I make a call, the same answer comes: " Error number 16 script 3."
I'm using Straight Talk Sim by ATT.

After SIM Unlocked, the phone recognize the SIM, but o Signal

Hi everybody
Actually I am not fresh or new to this kind of unlocking, i made many successful processes, but now i am facing a very strange situation, i had an HTC One for sprint updated to the latest sense 6 , i performed all the unlocking steps successfully, and i get it unlocked.
the problem starts when i inserted the local SIM card, it recognize it and ask me for the network setting, and when i am trying to do the last step (changing the network to GSM) it refuse !! and keep put the network to Automatic mode and tell me no network available!!
i tried almost everything, downgrade to previous Viber ROM ( sense 5.5) S-off , update firmware, etc.. with no hope
maybe i pressed something is the API menu by mistake which caused me all this problem,
any thoughts or ideas will be highly appreciated
today I made the same thing with m8 , same situation, any help pls
Sent from my 831C using xda premium
sim recognized but no signal in my htc one m7
I have sprint htc one m7 unlocked mobile, after updating to android 4.4.2 with htc sense 6, Im facing with a prblm when Iam inserting the sim, sim is recognizeing but no signal, Plz help me if any buddy knows
the same has happened to me, seems to happen randomly since I have unlocked 10+ like this and they work, but with a couple ones I haven't been able to...
have the same issue with HTC One M7 Sprint
[[ Cold ]] said:
the same has happened to me, seems to happen randomly since I have unlocked 10+ like this and they work, but with a couple ones I haven't been able to...
Click to expand...
Click to collapse
you are a recognized developer, please try to help us here
abudraih said:
you are a recognized developer, please try to help us here
Click to expand...
Click to collapse
Honestly.. I'm thinking it has to do with the firmware. Try method #3 here. If that still doesn't work, try it again for good measure.
I had same issue. My phone is s-off. The way it works for me was going back to 4.3 and i did the method with sim unlock helper. After that i restored my 4.4.2 sense 6 stock rom and unlock works but no mms o data (data 3g and H symbols shows!) I went back to 4.3 and used google to search how to fix gsm connection. You will find a tutorial from here. (Xda) I used cdma tool. Btw...you need to find your MSL code ....that tutorial show you how to do it. Good luck!
To going back to 4.3 i just flashed a 4.3 rom from reckvery. Look in development threads.
Sent from my HTCONE using XDA Free mobile app

neither can make or recieve call when my network is set to GSM/WCDMA/LTE auto mode

I have a LG G Flex model LG-D958. I have this weird problem with making or receiving phone call. If I set the network mode to only GSM mode, then I can make call out and receive incoming phone call. Other than this setting, example when set to GSM/WCDMA/LTE auto mode, I could only access the internet network in WCDMA or LTE or EDGE mode for DATA access BUT could not receive or make phone call. If I make a call out, it will cut off after several seconds. When I tried calling to my this mobile number from another phone, I could only hear the annouced voicecall telling me that it could not be reached at the moment. Then, when I set it back to GSM only mode..then making or receiving call is back to normal.
My ANdroid version is 4.4.2. Can someone advise me what I can do to get my Flex works again? Thank you
This is an L23? Where are you located? Its to my understanding those are sold gsm Sim unlocked.
Is this a new Sim card? Is it a GSM network Sim?
Have you changed the software at all?
Call problems under different network mode
Supertacomonkeyexplosion said:
This is an L23? Where are you located? Its to my understanding those are sold gsm Sim unlocked.
Is this a new Sim card? Is it a GSM network Sim?
Have you changed the software at all?
Click to expand...
Click to collapse
My model is LG-D958. I am not too sure what you meant L23?
I am from Thailand but currently in Malaysia.
Yes, this model is sold in THailand with open sim.
Yes, it is a new Sim card with GSM network that include 3G/4G network access.
THe software I see from the phone setting is D95820d-IND-XX; Android version is 4.4.2
appreciate your help..thanks
I'm not sure why you would have to change these radio settings at all. It should work right out of the box, except for your carriers specific APN settings.
Have you tried a factory reset? Start from scratch? Have you made any software changes?
Supertacomonkeyexplosion said:
I'm not sure why you would have to change these radio settings at all. It should work right out of the box, except for your carriers specific APN settings.
Have you tried a factory reset? Start from scratch? Have you made any software changes?
Click to expand...
Click to collapse
Yes, it supposed to be.. I mean it works for everything except cannot make call if I set it to GSM/3G/4G auto mode. I have done a hard reset but the problem still persists. I was given this phone by my cousin and I am not sure whether any softwares was changed BUT I understand that the original Android version should be 4.2.2 - but now it is 4.4.2, do you think this could be the reason that is the cause of this weird problem?
Maybe it is good to totally unflash and reflash it back to its original software version. Can you guide me to doing this?
THank you
Or is there any way that i can run a diagnostic test from within the phone itself? Please advise too, thank you
davidmok555 said:
Or is there any way that i can run a diagnostic test from within the phone itself? Please advise too, thank you
Click to expand...
Click to collapse
According to the lg website it should only be on 4.2.2.
http://m.lg.com/au/smartphones/lg-G-Flex-D958
I think a fresh start using the lg flash tool would be best.
Make sure you get the right firmware/tot, for your model.
Can you ask ,whomever you got the phone from what and why he changed the software?
Supertacomonkeyexplosion said:
According to the lg website it should only be on 4.2.2.
http://m.lg.com/au/smartphones/lg-G-Flex-D958
I think a fresh start using the lg flash tool would be best.
Make sure you get the right firmware/tot, for your model.
Can you ask ,whomever you got the phone from what and why he changed the software?
Click to expand...
Click to collapse
Yes, I have tried flash already but that only update the phone firmware BUT the Android version could not be changed? Any guide as to how I can flash the entire phone to its original firmware that comes with Android Version 4.2.2.? Thanks
Anyone can help advise me how I could downgrade android version 4.4.2 to 4.2.2. in my LG Flex Model LG-D958?
davidmok555 said:
Yes, I have tried flash already but that only update the phone firmware BUT the Android version could not be changed? Any guide as to how I can flash the entire phone to its original firmware that comes with Android Version 4.2.2.? Thanks
Click to expand...
Click to collapse
Hi..can you advise? Thanks
davidmok555 said:
Hi..can you advise? Thanks
Click to expand...
Click to collapse
On the LG website, or ask someone on the L23 section. Someone may have posted it already.
Can anyone help? Where can I find the necessary steps to do a re-flash?

Categories

Resources