hey. does anyone have a pure copy of this? my watch is currently bricked and doesn't do anything.
I'm in the same position. I installed TWRP--which prevented my Gear Live from booting. I tried flashing a stock boot.img and system.img but couldn't connect to my smartphone when it booted. I'm assuming it is because I have the lollipop baseband. What can we do?
Related
When TWRP was first released for the Live I borked my watch by not following the installation instructions properly.
After much, much messing around trying to reflash, factory reset etc I finally got my watch working using the custom ROM Octamod by octathorp with stock recovery.
I was never able to get a the watch to boot using Adams system.img
I have tried many time since and the only way I'm ever able to get the watch to boot is using Octamod.
So I was just wondering, has anyone successfully flashed it?
Flashed Yes, Still Staring at the boot animation >.>
You guys need to also flash a kernel typically a boot.Img file for the watch to boot the new system.img you flashed.
hello,i have a moto g 2014(guess you already knew that),but i had philztouch 6 and the touchscreen didnt work properly so instead of doing a factory reset,which i clicked,it wiped my phone so it has no os,to make sure it never happened again,i managed to put twrp 2.8.6.0,and managed to fix the"couldnt connect to drive E:" problem by formatting everything,but now when i flash a file,it says an error,"E:Error executing updater binary in zip "/usb-otg/cm-12.1(and so on).zip,and i know its trying to search for my build.prop i think,but i dont have one,someone help me
What's your phone model?
I'm guessing you tried to update from KitKat to lollipop without updating your bootloader which is causing the error when flashing cm12.1
Install stock lollipop then install cm12.1
Hello, I have a LG G4 T Mobile Variant 10N. I had a custom rom with twrp. Now with Marshmallow being out I wanted to go back to stock to update to MM then get a MM based rom. I did a complete wipe on TWRP OS was removed also. I tried using the LG Flash Tool, Have Installed LG Drivers and am using the correct KDZ. My phone goes into download mode without a problem the problem is my phone always stops at 82% during the flash process then I receive a error in LG Flash Tool saying "Error update cannot be done make sure phone is connected and try again" Iv'e tried several times to flash and it always stops at 82% What can I do? My phone has no OS installed. Only bootloops and download mode are achievable. Can I just flash the Marshmallow KDZ or will that brick my phone? No rude comments please. Ive done this before with no OS also but my phone never got stuck during the flashing process. HELP PLEASE P.S Recovery mode works as well but only the factory reset option is there. Ive tried the factory reset option phone just goes into download mode.
VileTemptation said:
Hello, I have a LG G4 T Mobile Variant 10N. I had a custom rom with twrp. Now with Marshmallow being out I wanted to go back to stock to update to MM then get a MM based rom. I did a complete wipe on TWRP OS was removed also. I tried using the LG Flash Tool, Have Installed LG Drivers and am using the correct KDZ. My phone goes into download mode without a problem the problem is my phone always stops at 82% during the flash process then I receive a error in LG Flash Tool saying "Error update cannot be done make sure phone is connected and try again" Iv'e tried several times to flash and it always stops at 82% What can I do? My phone has no OS installed. Only bootloops and download mode are achievable. Can I just flash the Marshmallow KDZ or will that brick my phone? No rude comments please. Ive done this before with no OS also but my phone never got stuck during the flashing process. HELP PLEASE P.S Recovery mode works as well but only the factory reset option is there. Ive tried the factory reset option phone just goes into download mode.
Click to expand...
Click to collapse
It sounds like you have a corrupted file or you're trying to flash lower than 10n when you've already upgraded to 10N. Did you try to re-download? If you flash 10n or 20i, you can't flash below the 10n.
Rapunzl said:
It sounds like you have a corrupted file or you're trying to flash lower than 10n when you've already upgraded to 10N. Did you try to re-download? If you flash 10n or 20i, you can't flash below the 10n.
Click to expand...
Click to collapse
Thank you. I am not sure what it was but I got it fixed now. I tried it on another computer and it worked now I have updated to Marshmallow.
So my Moto X was working fine. I decided to go and flash the stock firmware onto it. I dont know what happened but my moto x wont start and will cause a bootloop. I know that it starts and then tries to get into the recovery but fails and then reboots. I tried going to the recovery and found out that it shows the android logo and reboots. Meaning the recovery is broken or something. I can still flash files. So i flashed the same and different firmwares but none seem to work. So I decided to flash twrp. TWRP boots up and works no problem. Just think something messed my Moto X up. Any suggestions on what i can do?
Did you flash a related stock kernel (boot.img) with stock firmware too?
A bootloop after android logo at startup is often caused by (wrong) kernel!
I have bricked my phone after Magisk install fail.
I first unlocked bootloader succesfully
then i installed twrp succesfully
then i flashed magisk using twrp - this failed and sent device to erecovery. (which won't find package)
i used twrp to wipe data, now i was able to boot, and it installed like a fresh EMUI. However, almost all apps were broken- could not download themes/camera shut down etc.
To fix this, i wanted to restore to stock and did the following: download update package for my VTR-L09 of EMUI b175 (I was on b162 before), used Huawei Update Extractor to extract files and flashed BOOT.IMG, SYSTEM.IMG and RECOVERY.IMG. This was done without error.
Now my phone won't boot at all. I am stuck at the 'your device can't be trusted' screen. I cannot go into recovery. When I connect via USB, I hear the chime in Windows but I can't seem to connect with ADB.
What to do now?? Am I hard-bricked? I hope that anyone knows how to deal with my phone bricked like this. Please help me to solve this issue.
Best of wishes.
Edit: I am able to enter forced recovery, however updates fail at 5%.
I am also able to fastboot with USB, however I am unsure what to do next.
I unbricked my phone! Many thanks to who ah way and his solution found here: https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
:victory:
why are you doing it when you dont understand it?
You cannot flash part of B175 firmwar eover B162 firmware.. OMG.
use the HWOTa to go back to stock and please stop playing with the device without propper knowledge