Related
I am trying to get MMS working on the touch but I can not find the APN settings anywhere for USCC. THey have android devices but they will not give you the settings unless you have an "offical" android device Anyone have an idea of where to look
crackeyes said:
I am trying to get MMS working on the touch but I can not find the APN settings anywhere for USCC. THey have android devices but they will not give you the settings unless you have an "offical" android device Anyone have an idea of where to look
Click to expand...
Click to collapse
I'm gonna try out some setting that I've come across. Otherwise, I'll probably wait till they a Samsung Acclaim in the store and just sneak a peak at what they set. I'll let you know if I have any success.
EDIT: It didn't work. I'll have to find someone with an acclaim and find out their settings.
heavymetalmage said:
I'm gonna try out some setting that I've come across. Otherwise, I'll probably wait till they a Samsung Acclaim in the store and just sneak a peak at what they set. I'll let you know if I have any success.
EDIT: It didn't work. I'll have to find someone with an acclaim and find out their settings.
Click to expand...
Click to collapse
for the better part of a year, the USCC settings automatically load up (at least they always do for me) granted it takes about 15 minutes but they always get themselves in.
in-case you find yourself in the situation where it wont set itself,
a prime question i have- are you using Haret or NAND?
I have it on NAND. My internet works just the MMS is not. I know its not fully supported yet but I would at least like to know how to send them. I could care less about getting the, ( i get a ton of lame ones).
crackeyes said:
I have it on NAND. My internet works just the MMS is not. I know its not fully supported yet but I would at least like to know how to send them. I could care less about getting the, ( i get a ton of lame ones).
Click to expand...
Click to collapse
odd: i have been on NAND for almost a month i think and have not had an issue with MMS
when i was first playing around with android and Haret, there was plenty on PPC geeks here http://forum.ppcgeeks.com/showthread.php?t=113441&page=3
i find this extremely weird. since the newer kernel builds, i have not had a problem. i used to have to configure the APN all the time but havent needed for a while.
when you go into wireless settings does it say t-mobile? or what are your current settings?
I've found some settings but I am unable to set my MCC and MCN (I'm using Haret.)
http://www.androidonhtc.com/wiki/Carrier_network_settings#US_Cellular
and
http://forum.ppcgeeks.com/showpost.php?p=1746229&postcount=159
That seems to flush out the settings for the most part. I went to a US Cellular store to see if I could view the APN for the their recently released Android phone but you can't view it.
Just for info
I am on Incbus 2.2 rsl10 with DZO 8-7-2010 240x320 nbh
when i look at my APN it is showing T-Mobile US
crackeyes said:
Just for info
I am on Incbus 2.2 rsl10 with DZO 8-7-2010 240x320 nbh
when i look at my APN it is showing T-Mobile US
Click to expand...
Click to collapse
this is seriously odd... i have the same thing and no problems..... itll take some looking- ill get back
By default viewing the APN settings it locked out of the new Samsung Acclaim, but I'll dig deeper and try to let you know tomorrow.
360discgolf said:
By default viewing the APN settings it locked out of the new Samsung Acclaim, but I'll dig deeper and try to let you know tomorrow.
Click to expand...
Click to collapse
If you have one can you dump it that way i can dig around in it to find some APKs that i would like. Like the contacts backup
I got a system dump from the Acclaim and here is the here is the apns-conf.xml file. It has the APN data in there.
thanks for that Can i get the dump you host it somewhere so i can download it
crackeyes said:
thanks for that Can i get the dump you host it somewhere so i can download it
Click to expand...
Click to collapse
http://www.mediafire.com/?sharekey=...459af3dd29e584acfc74fb262737b13fe3b588d4beb93
I'm using zenexp 9.7 rom. Works perfect but I decided to try something different so I downloaded the cm7. Full 8 cyanogen and I loved it but certain mms won't download it tells me download unsuccessful so I went back to Zenexp no issues there wit mms so my question is am I doing something wrong why can't I get certain mms to download?
intermittent mms is a known issue for CM roms, but I would say that the goodies you get with CM7 gingerbread specifically, it's worth not getting a few mms IMO.
Yeah, I get that too. He's right though. Maybe one day it'll get fixed.
I've actually had this problem with froyo too, not just GB. That's why I'm back on a sense ROM. It's outdated but everything I need works, as I get and send a ton of picture mail for work. Unfortunately sacrifices sometimes need to be made. Sigh...
Sent from my HERO200 using XDA App
il Duce said:
intermittent mms is a known issue for CM roms, but I would say that the goodies you get with CM7 gingerbread specifically, it's worth not getting a few mms IMO.
Click to expand...
Click to collapse
I think I've read something about how Sprint uses an "uncommon" method for handling mms, and therefore its not 100% compatible with AOSP/non-Sprint ROMS.
A workaround may be available though. This is just a thought, and I don't send/rcv many mms so I cannot easily test it. Just throwing it out there and maybe someone can provide results.
I know you can access your mms via your profile on Sprint's website. I assume that all mms still go to your account, regardless of whether or not you can view them traditionally on the phone. Based on that assumption, I would think that you could bookmark a link to the webpage and view the missed mms from the browser in CM7.
Any thoughts?
Sent from my HTC Hero CDMA using XDA App
Hey guys.
So...I've gotten this error in the browser depending on what Rom I'm using. What I've noticed is if I get this message in the browser then my email doesn't work either.
Now, I only get it when I use the data connection ... If I'm on wifi, I'm good.
The only articles I fine on this say that its something AT&T...but I don't get it with the stock Rom...so I'm not convinced. its obviously something with the Rom I flash.
Well... I just flashed GR-1.2...and I really like it! Gingerbread. And the netflix app!!!
So...any ideas how to resolve this? I won't always have wifi...and I need access to my exchange email for work at all times. unless someone knows of a decent convened (free) email app that supports exchange....but I really like the one that comes with the Rom.
Any help is much appreciated. I can't be the only one with this issue...or can I? :'(
I am having the same problem but only with particular browsers such as Skyfire. Works fine on wifi but won't do anything on wireless connection.
Yeah...like Opera mini will work fine because it uses a proxy. But Dolphin I get the same error...and the built in browser...really...I just want me exchange to work...and I'm sure if I just download another email app iy will work...but I can't find a free one that supports exchange.
No ideas at all?
=(
Why don't you post the link so we can all try it?
try reflashing or clearing your cache. other than that if your phone is paid for buy your company they often have browsing restrictions
A link to the ROM? Well...the link to GR-12 is http://forum.xda-developers.com/showthread.php?t=1055622.
Firefly (an older version anyways) has the same issue. (http://forum.xda-developers.com/showthread.php?t=914284)
Axura (http://forum.xda-developers.com/showthread.php?t=872784) (like your ROM Adam) did NOT have this issue. All the email and browsers worked mint!
Thanks!
mrevankyle said:
try reflashing or clearing your cache. other than that if your phone is paid for buy your company they often have browsing restrictions
Click to expand...
Click to collapse
Yeah...I'm not convinced it is a carrier restriction because it seems to be ROM based...it works fine on stock ROM...my post above shows some other ROMs where this has happened to me.
SOLVED!
Ok...I thought for sure I've tried this before but I guess not.
It's the APN settings!!!! I went in and created a new APN with just the title 'AT&T' with the settings found here and it worked! It looks like the URL and Proxy are supposed to be blank and have to set the username and password. Those are the only differences but it works!
Now my email works mint on the data connection along with Dolphin!
Thanks Adam for looking! Sorry I didn't think of this sooner.
thank you so much
my problem got solved.
WAP settings
Yes, basically on the mobile networks you're going through a proxy server set up by the carrier. That's why the WAP settings matter
iceman198 said:
Ok...I thought for sure I've tried this before but I guess not.
It's the APN settings!!!! I went in and created a new APN with just the title 'AT&T' with the settings found here and it worked! It looks like the URL and Proxy are supposed to be blank and have to set the username and password. Those are the only differences but it works!
Now my email works mint on the data connection along with Dolphin!
Thanks Adam for looking! Sorry I didn't think of this sooner.
Click to expand...
Click to collapse
Thanks, it worked for me. i use a custom rom(BlissDOrid by pvteam) on my inspire 4G.
thanks!!!!
thanks. this helped me
Ive been running the O3D 10j firmware for a couple days now, havent upgraded to 10k yet but heres something to help out with mms/4g and how I got them working.
MMS is as simple as changing the apn. For whatever reason trying to change the default apn has been spotty for me, so what I do is just create a new apn with the following information:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Now save that and select it as your default. mms should now be working. For whatever reason that is the only ATT apn info I could get to work with mms. If I try to use any other configuration for ATT I lose mms functionality. Which was frustrating because I kept copying the apn off my other ATT phones and mms would not work. Neither my Aria nor my Captivate need the password but apparently this phone NEEDS that password to get mms on P920 roms...
4G is a little more complicated and, at the moment, has a trade-off. So from here you have to make a decision, because I have as of yet been able to fix this issue. But you have to choose to either have 4G and use a 3rd party dialer/contacts app OR you can keep the default apps and not have 4g. You're call but here how its done. Go into /system/etc/flex/flex.xml and change it to read like this:
<?xml version="1.0" encoding="utf-8"?>
<Flexinfo>
<Flexinfo
FLEX_COUNTRY_CODE="US"
FLEX_OPERATOR_CODE="ATT"
FLEX_MCC_CODE="310"
FLEX_MNC_CODE="410"
FLEX_REGION_CODE="0"
FLEX_SIMLOCK_ON="0"
FLEX_MODEL_CODE="0" />
</Flexinfo>
Now you should be getting the H+ symbol in the notification bar AND the up/down arrows. If you dont have the arrows then your apn is set incorrectly. If you dont have the H+ then you messed up in the flex.xml file.
Some notes:
Ive tried replacing the default Phone.apk/Contacts.apk with their equivalents from aosp roms, O3D roms, and Thrill roms. None of them have any affect on the issue. And trying to change the TelephonyProvider.apk has only resulted in frequent FC's. I can only assume its a framework issue but since I use a 3rd party dialer anyways Im not inclined to look into it.
I removed the default Contacts.apk because I got the occasional FC when ending a phone call. Removing it has no effect on anything since you cant use the default contacts app with the above 4G method. You have to keep the stock Phone.apk or you will lose the ability to make changes to your apn. It does not however affect your ability to make/receive calls with a 3rd party app. ContactsProvider.apk is also required or you wont be able to sync contacts to your phone.
Speaking of 3rd party dialers, Ive tested GoContacts and DialerOne so far and both work with no issues what so ever and have built in contacts functionality. Im going to assume there are many more that work as well.
So now theres really no excuse not to dive into the wide world of O3D roms!
EDIT: Just remembered that the time will be wrong after this too. Im trying to remember what I did to fix that. In the mean time you can go to menu>settings>Date & Time> and manually set the time. Its just that the GMT is being calculated incorrectly for each timezone so it gets the hour wrong so you need to set it manually. The minutes are correct though, you dont need to mess with those.
That's awesome news callmearia! Much appreciation for all the hard work you put in to get this working. Ill try this out 2nite when i get home. Thanks again
Sent from my LG-P925 using XDA App
Wait, you're telling me that I can run O3D roms on my Thrill? Sorry if this is a dumb question but I just picked one of these up a few days ago and still learning more about it.
formuk said:
Wait, you're telling me that I can run O3D roms on my Thrill? Sorry if this is a dumb question but I just picked one of these up a few days ago and still learning more about it.
Click to expand...
Click to collapse
Yes you can (cuz its essentially the same device) but up till now you lost the 4g and MMS with an o3d rom.
Sent from my LG-P925 using XDA App
03d??
any word of getting a 3d coverter for movies?? or where i can find 3d movies at for our phones??? please reply thxs
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
By the way this firmware works awsome appreciate it
no problems so far
when i do this mod, my google voice stops working...any ideas? i get the H+ and 4g speeds. is that part of the trade off?
mafiadesi said:
when i do this mod, my google voice stops working...any ideas? i get the H+ and 4g speeds. is that part of the trade off?
Click to expand...
Click to collapse
Ooh i didnt test google voice. Ill look into it tomorrow though.
Sent from my LG-P925 using Tapatalk
Have you tried also doing the telephony.apk? I noticed the Thrill and O3D have different sized telephony.apk sizes by a significant amount. I will try and test myself sometime tomorrow or Monday depending on my schedule.
pjcforpres said:
Have you tried also doing the telephony.apk? I noticed the Thrill and O3D have different sized telephony.apk sizes by a significant amount. I will try and test myself sometime tomorrow or Monday depending on my schedule.
Click to expand...
Click to collapse
Yea if i remember correctly it caused a few issues with fc's. But it couldnt hurt to try it again.
Sent from my LG-P925 using Tapatalk
claro pr
so what if im on another carrier not att but claro puerto rico ? how i fix the 3g?
bubuphonik said:
so what if im on another carrier not att but claro puerto rico ? how i fix the 3g?
Click to expand...
Click to collapse
3g SHOULD just work. But if not then go into your stock rom and copy the contents of /system/etc/flex/flex.xml and oaste them into the same file on your o3d rom. You might also want to get the stock apn settings off your phone to setup an apn on your o3d rom. Just follow the directions from the original post. I would recommend trying to change the apn first an then if that doesnt work go ahead try modifying your flex.xml file necuse the latter can cause issues.
Sent from my LG-P925 using Tapatalk
constant fc
after trying this with my thrill.. all the steps mentioned.. i rebooted and began to recieve FC for com.android.phone and com.lge.android.hime
glad i saved a copy of the old xml before trying this.
geraldf80 said:
after trying this with my thrill.. all the steps mentioned.. i rebooted and began to recieve FC for com.android.phone and com.lge.android.hime
glad i saved a copy of the old xml before trying this.
Click to expand...
Click to collapse
Which rom? So I can look into it.
Sent from my LG-P920 using Tapatalk
claro pr only has h+ which i still have after flashing king rom is that normal ?
CallMeAria said:
Which rom? So I can look into it.
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
[ROM][06/10] ThiaiZO3D V1.5-BaseV10K-Stock,Stable and fast
is the title.. everything else works great... but when i change the flex.xml info it starts all the trouble..
apn works great.. up and down arrows.. but no more than an "h" symbol.. no +
Edit: any ideas?
geraldf80 said:
[ROM][06/10] ThiaiZO3D V1.5-BaseV10K-Stock,Stable and fast
is the title.. everything else works great... but when i change the flex.xml info it starts all the trouble..
apn works great.. up and down arrows.. but no more than an "h" symbol.. no +
Edit: any ideas?
Click to expand...
Click to collapse
The apn wont add the h+. That's where the flex.xml comes in. The apn is just for mms.
I have ThaiZ booted right now but with Franlovs kernel and the only time I get a fc is if I try to use the stock dialer or contacts app. Is that what you're doing or are the fcs happening all the time? This is why the 3rd party dialer/contact app is required.
Sent from my LG-P920 using Tapatalk
bubuphonik said:
claro pr only has h+ which i still have after flashing king rom is that normal ?
Click to expand...
Click to collapse
Is the phone model a P925 or P920? I tried to look into it and Claro does offer 4g, although I couldn't determine on what devices.
Sent from my LG-P925 using Tapatalk
CallMeAria said:
The apn wont add the h+. That's where the flex.xml comes in. The apn is just for mms.
I have ThaiZ booted right now but with Franlovs kernel and the only time I get a fc is if I try to use the stock dialer or contacts app. Is that what you're doing or are the fcs happening all the time? This is why the 3rd party dialer/contact app is required.
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
So your saying i need to remove the phone and contacts apk files completely.. thought i could just not use them..
Yes. Im getting constant fc's when i have the modified flex.xml..
unless im wrong.. im gonna try deleting the phone.apk and contacts.apk files.. um.. later..
could you save a tired guy the trouble of sifting through search results and lemme know the filepath for said apk files?
Sent from my LG-P920 using xda premium
geraldf80 said:
So your saying i need to remove the phone and contacts apk files completely.. thought i could just not use them..
Yes. Im getting constant fc's when i have the modified flex.xml..
unless im wrong.. im gonna try deleting the phone.apk and contacts.apk files.. um.. later..
could you save a tired guy the trouble of sifting through search results and lemme know the filepath for said apk files?
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Don't remove phone.apk. Too many things dependant on it. Contacts.apk is in /system/app/Contacts.apk
Have you messed with anything telephony related? That's when I started getting a lot of fc's.
Sent from my LG-P920 using Tapatalk
Hey folks,
Since no one else has done so, I just checkout CM7 sources from GitHub and made a fresh build. It seems to be working pretty well on my VZW Droid3, except for the camera which doesn't work at all. Anyway, I thought I'd share in case anyone else wants to test.
It's just stock CM7.2 + Hashcode, if you want other tweaks like OC you'll have to port them from other roms. I'd like to get the camera working but don't expect much as I don't have a lot of free time.
File: cm-7-20120708-UNOFFICIAL-solana.zip
MD5: 38b6adfd675786dd04fd11c2fae5cd6c
Mirrors:
http://www.MegaShare.com/4374349
http://uploadhero.com/dl/Wj3lsp2b
http://speedy.sh/SFNPj/cm-7-20120708-UNOFFICIAL-solana.zip
http://depositfiles.com/files/o0gdxy8nm
reserved
Thanks! Nice to see attention on CM 7.2 again, especially with the old build's links down. Have there been any changes/updates since the Hash build last year (August?)?
Sent from my DROID3 using xda app-developers app
I'm assuming you tried the CM9 camera fix on CM7? Seems overly obvious, but I love CM7 on my DX and that's why I'm using it as my DD over the D3.
DrWowe said:
Hey folks,
Since no one else has done so, I just checkout CM7 sources from GitHub and made a fresh build. It seems to be working pretty well on my VZW Droid3, except for the camera which doesn't work at all. Anyway, I thought I'd share in case anyone else wants to test.
It's just stock CM7.2 + Hashcode, if you want other tweaks like OC you'll have to port them from other roms. I'd like to get the camera working but don't expect much as I don't have a lot of free time.
Click to expand...
Click to collapse
Very nice!
Can't download now, but someone test to see if a 3rd party camera app works. That was the case in the last version of CM7 I used on the D3, stock camera didn't work but others did (Camera Zoom FX for example).
I'll be flashing this ROM fairly soon (soon as in, tonight) and I'll give a third party camera app a try. I'll get back to you as to the results.
UPDATE 1: Just tried a third party camera app, no dice. Same black screen as the stock camera.
UPDATE 2: Notification LED is stuck on. Poking around the settings to see if I can get it to turn off...
same as Hashcode CM7.2 ver
- no 3G data in GSM
- no possible to save new APN
+ The camera360 app. functioning perfectly
This patch here did the trick:
GSM Patch:
http://www.2shared.com/file/ilFRwlr1/GSM_PATCH_1116_WithData.html
It's basically the GSM patch from an older thread about CM7. It works fine for 3G and calling and whatnot, and I haven't seen anything go horribly wrong with it. Obviously, I'll report back if anything does.
And my previous statement about a 3rd party app not working, I have to retract that statement, I just installed FxCamera and it works just fine. Barcode scanner seems to be in working order too.
Still testing, will report back if I encounter any other bugs.
UPDATE: Front Facing Camera definitely doesn't work. Same deal as on CM9 before, it comes up with nothing but static.
switchblade920 said:
This patch here did the trick:
GSM Patch:
http://www.2shared.com/file/ilFRwlr1/GSM_PATCH_1116_WithData.html
It's basically the GSM patch from an older thread about CM7. It works fine for 3G and calling and whatnot, and I haven't seen anything go horribly wrong with it. Obviously, I'll report back if anything does..
Click to expand...
Click to collapse
it isn't, (first thing i tried that patch)
Well, that's the patch that I used and it's working, but I did have to manually add the APNs in order to get 3G.
EDIT: I just read your signature properly. My phone is an XT862 and yours being an XT860 is probably why the patch isn't working for you. The two phones are somewhat different, but only in really subtle ways. I always hear about GSM patches being incompatible between the two. The patch that I linked seems to be for the XT862 and wont work with the XT860.
switchblade920 said:
Well, that's the patch that I used and it's working, but I did have to manually add the APNs in order to get 3G.
EDIT: I just read your signature properly. My phone is an XT862 and yours being an XT860 is probably why the patch isn't working for you. The two phones are somewhat different, but only in really subtle ways. I always hear about GSM patches being incompatible between the two. The patch that I linked seems to be for the XT862 and wont work with the XT860.
Click to expand...
Click to collapse
thanks for your reply probably you right
the main issue is when try to add new APN, normaley the MCC & MNC values are there, but If they are not (like in that case) it is useless because the APN will not be saved.
I'd love to CM7 running on this phone. Have you tried this fix posted for the DX? I currently run CM 7.1.0 on my DX and it's perfect... But it doesn't have a FFC to figure out.
http://www.droidxforums.com/forum/cyanogenmod/31280-camera-camcorder-fix-cm7.html
Well, if anyone could possibly tell me where to start, I could probably look into the whole FFC issue, see if there was anything I could possibly do (with my limited knowledge).
switchblade920 said:
Well, if anyone could possibly tell me where to start, I could probably look into the whole FFC issue, see if there was anything I could possibly do (with my limited knowledge).
Click to expand...
Click to collapse
you would want to look at ricks2 framework edits for ics i think, cm9 had an identical problem with sim cards not being found, no mcc values etc.
boazal said:
thanks for your reply probably you right
the main issue is when try to add new APN, normaley the MCC & MNC values are there, but If they are not (like in that case) it is useless because the APN will not be saved.
Click to expand...
Click to collapse
u can set them yourself
redsox985 said:
I'd love to CM7 running on this phone. Have you tried this fix posted for the DX? I currently run CM 7.1.0 on my DX and it's perfect... But it doesn't have a FFC to figure out.
http://www.droidxforums.com/forum/cyanogenmod/31280-camera-camcorder-fix-cm7.html
Click to expand...
Click to collapse
I wanna try this which one should I use the newest one? Not sure which nightly this cm7. 2 is based off of but they have different fixes depending on which build ur running
Sent from my DROID3 using Tapatalk
huhu1312 said:
u can set them yourself
Click to expand...
Click to collapse
you actually cant add/edit any apn information since it wont save or even seem to read/load values from the apns-conf.xml unless the sim card is recognized/working. it looks alot like the same problem we xt860 owners had on ics, once the sim card was recognized (thanks to rick2) everything worked.
Willis111 said:
you actually cant add/edit any apn information since it wont save or even seem to read/load values from the apns-conf.xml unless the sim card is recognized/working. it looks alot like the same problem we xt860 owners had on ics, once the sim card was recognized (thanks to rick2) everything worked.
Click to expand...
Click to collapse
can you post Rick#2 link ?
boazal said:
can you post Rick#2 link ?
Click to expand...
Click to collapse
I could but I would have to use the forum search which is available to all... Try "xt860 CM9 Working Data" as your search string, the thread was called something like that.
Willis111 said:
I could but I would have to use the forum search which is available to all... Try "xt860 CM9 Working Data" as your search string, the thread was called something like that.
Click to expand...
Click to collapse
Thanks!
http://forum.xda-developers.com/showthread.php?t=1465297&highlight=xt860+cm9+working+data
(for CM9 NOT CM7)!