So I have a Nokia Lumia 810 and i decided to update it over night while the charger was not plugged in. Well I guess the battery ran out during the update and now all Im getting is the Nokia and T-mobile logo appearing over and over! I done the Hard reset where it shows the 2 cogs but nothing! Im so lost Anyone know how to solve this??
Related
hi,
I have a ipaq 6510 that was not use for a while. I put it to recharge a whole night, but what I get is just a blinking startup screen (that one with the hp logo and the 1.40 somethign version ...)- it's coming on for 1-2 seconds, and going off again ...
I've tried now just with the charger, without the battery, and it's showing me that the device has power, but I can't start it up.
I also tried soft/hard reset.
can anyone help ?
- I got it in bootloader mode, and after that somehow it started up
I will come back later with details if everything is working fine
If the battery voltage drops below 3.2V it will not be possible to charg the device.
go to a gsm repair shop and ask them to charge your battery.
Hey all,
I got a problem with my x10
My phone was charching at night
The next morning it wouldnt start
Now it still wont start or boot or even connect to my pc or something so i bought a new battery in case of problem with the battery but no results.
Does somebody know a solution or maybe a program to boot it by pc
I thinks its the software because my led will blink red a few times
My battery is fully charched
Thx in advance
Wrong forum
John-K said:
Hey all,
I got a problem with my x10
My phone was charching at night
The next morning it wouldnt start
Now it still wont start or boot or even connect to my pc or something so i bought a new battery in case of problem with the battery but no results.
Does somebody know a solution or maybe a program to boot it by pc
I thinks its the software because my led will blink red a few times
My battery is fully charched
Thx in advance
Click to expand...
Click to collapse
You had entered to wrong forum my friend. This is X1 forum, not X10.
Nokia Lumia 620 have a completely discharged him after a while I put it on the charger to charge again so that it loads the nokia name does not appear after the battery symbol and then the phone restarts and does the same thing. any solution?
I have a Lumia 625 running Windows Phone 8.1 Dev Preview and it worked great until my phone run out of battery and closed itself.
Now when I plug it in the charger nothing appears.
I have the phone from 1 week and everything was okey.
What can I do? Pls help me !
newbie_l5 said:
I have a Lumia 625 running Windows Phone 8.1 Dev Preview and it worked great until my phone run out of battery and closed itself.
Now when I plug it in the charger nothing appears.
I have the phone from 1 week and everything was okey.
What can I do? Pls help me !
Click to expand...
Click to collapse
did you try another charger ?
try charging over night , if it didn't boot up then sent it RMA
yeahhh..i did that...and then i soft reset it...and it's working ...
What a nightmare. A friend asked if I could try to fix the a T813 which was stuck on the Samsung logo. The reason it ended up like that wasn't clear but I now believe it must have corrupted the firmware because of a battery issue. I am not sure.
Anyway I assumed a reflash would solve everything, but I encountered a number of problems and now I believed it's nearly bricked.
The battery initially charged but the tablet would not turn off. So it ended up staying stuck on the Samsung logo till it discharged. I tried to charge it again when I was going to begin flashing and it wouldn't. I thought maybe the battery had died so I replaced it.
The battery came with 50% charge and seemed fine. I tried to begin flashing and it had some issues to begin with, stuck on initialisation, then it got half way through and decided to fail. Nightmare
Now it comes up with the blue screen saying software failed blah blah blah use Smart Switch to repair and I was able to get into download mode.
However Smart Switch doesn't recognise the device.
I wanted to attempt more firmware flashes but the battery died. Now it will not charge.
It loads the screen and turns off. I have no way of knowing if its charging at all.
Does the battery need software to charge? Or do I have a charger problem? I know if the battery had charge it would only be soft bricked and I could continue to try and fix it, but until I can work out why it won't charge. It essentially bricked.
It might be important to add that the only thing I have to charge this tablet is a s9 phone cable and charger brick which is 5v 2a I think. Is that enough? Because of this the tablet turns on the screen and uses the power its gained showing me the blue screen. I am wondering if I am fighting a battle between drain and charge. Anyone got any advice on what I can do?