Hi all. I'm an idiot. I updated to the 5.0 rom, and tried to downgrade to 4.4.3. It went well, until my device tried to update to 4.4.4. Now I'm stuck with a bootloader (xt1053 30.B7) that says it's locked, says it can't be unlocked, and says
Code:
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup:0x35
CID read failure
Invalid CID status 0x69
CustomerID error. Contact dealer: 0xdead
no SP partition found
Please, is there any way to bring my device back to life? I've tried flashing pretty much anything I can get my hands on, but it always fails because the bootloader is locked. I tried unlocking it with the code I got from motorola a while back, but that's not working either. Again, please help if possible.
I'm a jackass. I'm trying the RSD with the newest SBF now.
Hopefully the 4.4.4 will fix you up.
thehanutedtubby said:
Hi all. I'm an idiot. I updated to the 5.0 rom, and tried to downgrade to 4.4.3. It went well, until my device tried to update to 4.4.4. Now I'm stuck with a bootloader (xt1053 30.B7) that says it's locked, says it can't be unlocked, and says
Code:
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup:0x35
CID read failure
Invalid CID status 0x69
CustomerID error. Contact dealer: 0xdead
no SP partition found
Please, is there any way to bring my device back to life? I've tried flashing pretty much anything I can get my hands on, but it always fails because the bootloader is locked. I tried unlocking it with the code I got from motorola a while back, but that's not working either. Again, please help if possible.
Click to expand...
Click to collapse
I am not very familiar with how Moto's phone's do their stuff. But, have you tried flashing the stock image for your device? One thing though, if you used the leaked soak test to upgrade your device, your screwed until the official lollipop image for your device comes up.
thehanutedtubby said:
Hi all. I'm an idiot. I updated to the 5.0 rom, and tried to downgrade to 4.4.3. It went well, until my device tried to update to 4.4.4. Now I'm stuck with a bootloader (xt1053 30.B7) that says it's locked, says it can't be unlocked, and says
Code:
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup:0x35
CID read failure
Invalid CID status 0x69
CustomerID error. Contact dealer: 0xdead
no SP partition found
Please, is there any way to bring my device back to life? I've tried flashing pretty much anything I can get my hands on, but it always fails because the bootloader is locked. I tried unlocking it with the code I got from motorola a while back, but that's not working either. Again, please help if possible.
Click to expand...
Click to collapse
IF you updated to one of the 5.02 leaks (or soaks as they were called), and got this message when trying to downgrade by flashing an OLDER Moto SBF (like 4.4.4), then you will likely be stuck until a 5.02 SBF leaks.
GPT.BIN doesn't like being downgraded, or attempted to be downgraded.
However, if your bootloader still says 30.B7, I would try flashing the stock Moto Xt1053 4.4.4 SBF using mfastboot by following option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html
So the bootloader does say it's 30.b7, but it also says it's locked. And when I try to unlock it, it says fastboot oem unlock disabled. I have tried flashing back to 4.4.4, but I think the updated gpt from 5.0.2 is messing it up.
As a few of us have tried to warn people, and just like the mad rush to flash kit Kat when it came out.... You will likely need to wait for the SBF of 5.0.2 for your device. Not much else you can do at this point.
Sorry for your unfortunate situation.
I managed to get it running again by flashing the gpt of the lollipop files. I'm doing my best to go to the 1053 lollipop build to avert another brick. Thanks all for the help!
And I'm successfully on the XT1053 lollipop build. Let it be known that I'm only on lollipop to avoid incompatibilities due to the new GPT I had to flash. Sorry Motorola. Trust me, I wish I had waited.
thehanutedtubby said:
And I'm successfully on the XT1053 lollipop build. Let it be known that I'm only on lollipop to avoid incompatibilities due to the new GPT I had to flash. Sorry Motorola. Trust me, I wish I had waited.
Click to expand...
Click to collapse
I did the same thing with my moto x and now I dont know what to do with it, can you help me?
Does yours say exactly what mine does? If so, flash the gpt.bin from the 5.0.2 zip's root directory, and reflash 4.4.4 completely. Then update using the zip from the other thread.
thehanutedtubby said:
Does yours say exactly what mine does? If so, flash the gpt.bin from the 5.0.2 zip's root directory, and reflash 4.4.4 completely. Then update using the zip from the other thread.
Click to expand...
Click to collapse
Can you explain what you did after flashing 4.4.4 with the gpt.bin from 5.0.2. I'm about to do that but am not sure what update in another thread you are referencing.
thanks.
thank you bro, i was really desperate! this must be stickie!
A sticky on how to possibly brick your device with one false move?
Related
I'm on a Republic Wireless Moto X. After rooting and killing W/P with MotoWPNoMo, I went on to use slapmymoto. I then installed the kit kat update and now I'm unable to get out of fastboot. The message on the screen is as follows:
downgraded security version
update gpt_main version failed
failed to hab check for gpt_backup: 0x35
CID Read Failure
Invalid CID status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP partition found
Fastboot Reason: Invalid CID
Any info would be appreciated. Thank You.
douttit said:
I'm on a Republic Wireless Moto X. After rooting and killing W/P with MotoWPNoMo, I went on to use slapmymoto. I then installed the kit kat update and now I'm unable to get out of fastboot. The message on the screen is as follows:
downgraded security version
update gpt_main version failed
failed to hab check for gpt_backup: 0x35
CID Read Failure
Invalid CID status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP partition found
Fastboot Reason: Invalid CID
Any info would be appreciated. Thank You.
Click to expand...
Click to collapse
Try this. Worked for me when I bricked a few weeks ago.
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
If you plan on updating to KK I suggest going to safestrap route and not the official OTA. This will leave your bootloader untouched and write protection off. Also, make sure you don't skip to 4.4.2, go to 4.4 first. Good luck!
If your CID partition is corrupted I don't think you can fix the phone.
sent via tapatalk
1ad_m12 said:
Try this. Worked for me when I bricked a few weeks ago.
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
If you plan on updating to KK I suggest going to safestrap route and not the official OTA. This will leave your bootloader untouched and write protection off. Also, make sure you don't skip to 4.4.2, go to 4.4 first. Good luck!
Click to expand...
Click to collapse
Republic Wireless does not have a 4.4 ROM. They went straight from 4.2.2 to 4.4.2
Anyways, let us know if you get it working.
I do not advise that anyone attempt to downgrade back to jelly bean 4.2.2 after upgrading to KiKat. I used this guide to try to maintain root : http://forum.xda-developers.com/moto-x/development/rom-stock-rooted-republic-wireless-165-t2738275/post52349180 The thing that I think went wrong is that I used the leaked update.zip for Repuplic Wireless to install KitKat rather than taking the OTA update. My phone booted to 4.4.2 just fine but without root, oh no! I thought. In a panic I tried to flash jelly bean using RSD. I was bricked from then on. The phone would not get past fastboot. It gave the error :
downgraded security version
update gpt_main version failed
failed to hab check for gpt_backup: 0x35
CID Read Failure
Invalid CID status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP partition found
Fastboot Reason: Invalid CID
I used a few fastboot commands and then flashed the 4.4.2 stock rom using RSD to get everything working again. It sucked and I am now on KitKt without root
Seems I found a way to completely erase all data on my phone, with fastboot being the only thing I can get into. Every option in fastboot errors out. There are no partitions. Bootloader got locked somehow and I can't unlock it anymore. I have tried flashing 4.4 and 4.4.2 with RSDLite - errors. My IMEI and SKU are both zero'd out according to the barcodes fastboot menu. Only my serial# remains. It's a big ol' mess
Here's the bootloader https://drive.google.com/file/d/0BzDChv5WgeeDSTc2VFYzTTNXaWp4MkR4d0dKcXQzdkxRNlJn/view?usp=sharing
It says:
Code:
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup: 0x35
CID Read Failure
Invalid CID status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP partition found
Fastboot Reason: Invalid CID
I think this thread is the closest to my problem: http://forum.xda-developers.com/moto-x/moto-x-qa/fastboot-reasoninvalid-cidsolved-t2632386
Can anyone help?
edit:
Figured it out! It was a downgrade issue I think.
I got the official GSM DEV 4.4.4 file from motorola here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images (i had to request the download, took about 6 hrs to get "approved") and flashed that using their own flash.bat in the zip. I also had to use mfastboot.exe and rename it to fastboot.exe so the batch file would work.
So I guess once you upgrade, no more flashing official images that are a downgrade!
eleazar6 said:
So I guess once you upgrade, no more flashing official images that are a downgrade!
Click to expand...
Click to collapse
Correct. This has been posted about MANY TIMES.... Once you have upgraded to 4.4.2 or above... NEVER attempt to downgrade. If you downgrade you will immediately brick, or set yourself up to brick on the next OTA.
In fact, the only time it was "safe" to downgrade is when meeting the pre-reqs and following the SlapMyMoto process (i.e. 4.4.0 to 4.2.2 w/camera update).
Same problem but after Lollipop OTA update
I have the same problem with a botched install of the recent ghost lollipop OTA update on the Moto X 1056. The only difference is that the boot error message is missing the "No SP partition found" line. Any ideas where I can get the ghost stock ROM to try the fix presented here? I did manage to save the OTA Blur_Version.212.144.2.ghost_sprint.Sprint.en.US.z ip, but I don't know how to us that with fastboot.
Any suggestions greatly appreciated.
Problem SOLVED! Android 5.1 stock ROM revived it! Thank you, Motorola and XDA!
Sorry, not sure if it's proper to repeat my cry here. But I'm having a quite similar situation to this post: [SOLVED]Bootloader bricked, recovered, but fail when running firmware
Mine is a XT1058 from CA Rogers. I unlocked the bootloader and played with Brazil stock roms, a CM11 snapshot rom, having no problems.
After I tried RETAIL-GB_GHOST_KLA20.16-2.16_cid7_CFC_1FF_v2.xml (4.4.2, i guess), things went wrong. No signal as I expected, but I screwed up with OTA 4.4.4 installed so I got the same stuck at Fastboot mode:
Code:
BL version: 30.B7
Device is LOCKED.
downgraded security version
update gpt_main version failded
Failed to hab check for gpt_backup: 0x35
CID Read Failure
Invalid CID Status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP Partition found
Fastboot Reason: Invalid CID
I've tried mflash and RSD with 4.4.4 stock roms, but none of them worked, and all failed to write into the phone at Step 2 <step operation="flash" partition="partition" filename="gpt.bin":
XT1058_RCI-CA_4.4.4_KXA21.12-L1.26_59_cid14_CFC_1FF
XT1052_RETAIL-GB_4.4.4_KXA21.12-L1.26_56_cid7_CFC_1FF
XT1052_RETAIL-EU_4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF
ATT_XT1058_4.4.4-KXA21.12-L1.26_CFC_1FF
Editing XML to skip the step with error didn't work. It failed to flash at every step. Any help will be appreciated!
Try and flash tz and gpt from 4.4.4
mk1129 said:
Sorry, not sure if it's proper to repeat my cry here. But I'm having a quite similar situation to this post: [SOLVED]Bootloader bricked, recovered, but fail when running firmware
Mine is a XT1058 from CA Rogers. I unlocked the bootloader and played with Brazil stock roms, a CM11 snapshot rom, having no problems.
After I tried RETAIL-GB_GHOST_KLA20.16-2.16_cid7_CFC_1FF_v2.xml (4.4.2, i guess), things went wrong. No signal as I expected, but I screwed up with OTA 4.4.4 installed so I got the same stuck at Fastboot mode:
Code:
BL version: 30.B7
Device is LOCKED.
downgraded security version
update gpt_main version failded
Failed to hab check for gpt_backup: 0x35
CID Read Failure
Invalid CID Status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP Partition found
Fastboot Reason: Invalid CID
I've tried mflash and RSD with 4.4.4 stock roms, but none of them worked, and all failed to write into the phone at Step 2 <step operation="flash" partition="partition" filename="gpt.bin":
XT1058_RCI-CA_4.4.4_KXA21.12-L1.26_59_cid14_CFC_1FF
XT1052_RETAIL-GB_4.4.4_KXA21.12-L1.26_56_cid7_CFC_1FF
XT1052_RETAIL-EU_4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF
ATT_XT1058_4.4.4-KXA21.12-L1.26_CFC_1FF
Editing XML to skip the step with error didn't work. It failed to flash at every step. Any help will be appreciated!
Click to expand...
Click to collapse
Long story short, and if you read that entire thread, and its progression you'll understand the long story, Right now, it would appear the GPT.BIN on your phone is NEWER than the GPT.BIN in any SBF you are trying to flash. Hence your problem.
You will likely have to wait until a newer SBF gets leaked. At this point, it might be after Lollipop SBF's start leaking.
hbenz2008 said:
Try and flash tz and gpt from 4.4.4
Click to expand...
Click to collapse
I tried several 4.4.4 stock ROMs, but no luck at the very beginning on gpt. What's tz, BTW?
Thank you anyway.
KidJoe said:
Long story short, and if you read that entire thread, and its progression you'll understand the long story, Right now, it would appear the GPT.BIN on your phone is NEWER than the GPT.BIN in any SBF you are trying to flash. Hence your problem.
You will likely have to wait until a newer SBF gets leaked. At this point, it might be after Lollipop SBF's start leaking.
Click to expand...
Click to collapse
I guess so... I even want to flash the Moto X 2014 Lollipop stock ROM. But I should be patient wait for my last hope, then.
Thank you!
hbenz2008 said:
Try and flash tz and gpt from 4.4.4
Click to expand...
Click to collapse
It's weird that my reply to your PM cannot be found in my Sent items box and hope you may get my response.
KidJoe said:
Long story short, and if you read that entire thread, and its progression you'll understand the long story, Right now, it would appear the GPT.BIN on your phone is NEWER than the GPT.BIN in any SBF you are trying to flash. Hence your problem.
You will likely have to wait until a newer SBF gets leaked. At this point, it might be after Lollipop SBF's start leaking.
Click to expand...
Click to collapse
How about only flashing the bootloader and partition from RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml.zip? Maybe that's crazy
yeah i wouldnt phuk with her like that, prob is gpt
mk1129 said:
I guess so... I even want to flash the Moto X 2014 Lollipop stock ROM. But I should be patient wait for my last hope, then.
Thank you!
Click to expand...
Click to collapse
mk1129 said:
How about only flashing the bootloader and partition from RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml.zip? Maybe that's crazy
Click to expand...
Click to collapse
THe 2013 and 2014 X do not use the same parts. I would NOT flash any components of the 2014 X on the 2013 X.
KidJoe said:
THe 2013 and 2014 X do not use the same parts. I would NOT flash any components of the 2014 X on the 2013 X.
Click to expand...
Click to collapse
Agree. I'd wait for the Lollipop SBF, then. Thanks!
I suddenly realized that I encrypted the phone when it's on 4.4.2 before playing with various SBFs, and that may be the reason why I cannot write anything any more....
I had the exact same problem with my XT1053. I was able to fix it by flashing the 5.0.2 GPT. If your variant has a leaked zip, it's in the root directory. I wouldn't recommend using anything but your own variant's, but if that's what you want to do so be it.
thehanutedtubby said:
I had the exact same problem with my XT1053. I was able to fix it by flashing the 5.0.2 GPT. If your variant has a leaked zip, it's in the root directory. I wouldn't recommend using anything but your own variant's, but if that's what you want to do so be it.
Click to expand...
Click to collapse
Thanks for the tips! You''re lucky! BTW, Where did you get the 5.02 GPT? from Brazil XT1058 soak test leak?
And yes, I'm really expecting the full lollipop stock rom to have a final try to save mine. I only heard Brazil XT1058 has the soak test for 5.02 and am wondering if I can leverage that...
Problem SOLVED! Android 5.1 stock ROM (XT1058_GHOST_RCICA_5.1_LPA23.12-15_cid14_CFC_xml) revived it!
Thank you, Motorola and XDA!
After attempting to upgrade rom stock KIT KAT 4.4.4 to 5.0.2 Lollipop over the air, I can not start the cell.
It is only on this screen "Fastboot Reason: Invalid CID".
It is not possible to go into bootloader, Flash attempts unsuccessfully by RSD Lite 6.1.5 and mfasboot.
In this case how to proceed.
View attachment 3306441
Looks more like you tried to downgrade which you cannot do
renatomuniz2015 said:
After attempting to upgrade rom stock KIT KAT 4.4.4 to 5.0.2 Lollipop over the air, I can not start the cell.
It is only on this screen "Fastboot Reason: Invalid CID".
It is not possible to go into bootloader, Flash attempts unsuccessfully by RSD Lite 6.1.5 and mfasboot.
In this case how to proceed.
View attachment 3306441
Click to expand...
Click to collapse
@WillisD is 100% correct...
Notice the message in the first shot?
Code:
downgraded security version
update gpt_main version failed
preflash vaildation failed for GPT
And the shot showing the top of the AP Fastboot screen shows 30.BC which is the bootloader version for the leaked test/soak 5.02...
You attempted to downgrade, and the phone doesn't like it.
Please see -> http://forum.xda-developers.com/mot..., and the impacts of GPT.BIN and MOTOBOOT.IMG
At this point, if your phone is saying Invalid CID and stops when it tries to boot, you are likely stuck until a 5.1 SBF for your phone/carrier leaks, and you can mfastboot fash it. It is the only SAFE way.
There might be other ways (look in the threads discussing the leaked 5.02), but I wont suggest them as they wont take you back to 100% stock, and also introduce version mismatches on your phone which could cause problems/issues.
You need flash moto boot and bootloader from 5.0.2 ota files and later can flash stock 4.4.4 me too brick my phone ..... And solved
flashed boot and bootloader from 5.0.2 and worked well, thanks makysssdroid
eldar4uk said:
flashed boot and bootloader from 5.0.2 and worked well, thanks makysssdroid
Click to expand...
Click to collapse
Just do NOT take any future OTA's if you're now running a gpt.bin and motoboot.img from a different rom than you are now running on your phone. If history is any indication, you are very likely to brick in this situation.
makysssdroid said:
You need flash moto boot and bootloader from 5.0.2 ota files and later can flash stock 4.4.4 me too brick my phone ..... And solved
Click to expand...
Click to collapse
Bro,
Can you help me?
My phone is XT1056, and i am having the same error as you were,
Can you suggest me what to do?
I was on android 4.4.4, and by mistake i installed the Security Update,
after that my phone was i this state.
KidJoe said:
@WillisD is 100% correct...
Notice the message in the first shot?
Code:
downgraded security version
update gpt_main version failed
preflash vaildation failed for GPT
And the shot showing the top of the AP Fastboot screen shows 30.BC which is the bootloader version for the leaked test/soak 5.02...
You attempted to downgrade, and the phone doesn't like it.
Please see -> http://forum.xda-developers.com/mot..., and the impacts of GPT.BIN and MOTOBOOT.IMG
At this point, if your phone is saying Invalid CID and stops when it tries to boot, you are likely stuck until a 5.1 SBF for your phone/carrier leaks, and you can mfastboot fash it. It is the only SAFE way.
There might be other ways (look in the threads discussing the leaked 5.02), but I wont suggest them as they wont take you back to 100% stock, and also introduce version mismatches on your phone which could cause problems/issues.
Click to expand...
Click to collapse
Hi, please, where can i get the latest gpt.bin and boot for a generic xt1058? cause mine is bricked and gpt.bin from every firmware (i tried LATAM, BR, and AR 21.12-15 and the one that last with .7 and it seems like the gpt.bin in those firms its not the last, i had no problem cause i skipped that part everytime, but atm my phone is bricked and i need to reflash bootloader and i cant cause older gpt.bin in the firmwares :S
Guys, I need a help from you.
I update my Moto X from version 4.4.4 to 5.0.2. I downloaded the file, put it in memory and sent search update. In the end of the process, the unit restarted and does not go more fastboot.
Red is written:
downgrade security version
gpt_mais version update failed
faleid hab to check for gbt_backup: 0x35
CID reader failure
invalid CID status 0x69
customer ID error. contact Deaker: 0xdead
and yellow is written:
Fastboat reason: Invalid CID
I did the procedures to reinstall the 4.4.4, but nothing causes it to be installed, it seems the fastboot was novament blocked.
Please help me out of this, I take a lot of this device.
Thank you!
That doesn't happen when you are stock and take the update, even to the leaked lollipop updates... unless you had tried downgrading, or have mismatched gpt.bin and motoboot.img parts compared to the rest of the rom.
See this thread -> http://forum.xda-developers.com/moto-x/moto-x-qa/help-moto-x-xt1058-unbrickable-t3110480 Its the same situation. Has info and links that MIGHT help you