Hi all,
I am after the value of R536 on the s3 mini, I had a look at the service manual but there is no parts list so I'm unable to check the value that way.
Reason I need the value of R536 is that I changed the usb charger port and noticed that it was missing.
If someone has the parts list or can even measure it with a multimeter I would be most grateful
Regards
Peter
Related
Hi,
I have an xda with pocketpc 2002.
I've been trying to activate both IrDA and serial port (for my GPS) with no success.
I can use only one at a time, changing the Port value in Irsir1 setting.
Is there a way to use both together?
This can be done at the expense of deactivating the USB port as I sync with my IrDA.
Thanks,
Sjack.
Sjack
I think they both use the same COMM port so its one or the other.
You can search this forum as much has been written on this.
Hey everyone, I'm trying to Wire a iGPS-180 for my SX56... the original wiring was for an iPAQ 3100-3700... I've got the pinouts for the SX56 but I was wondering if anyone knew what the pinout for an iPAQ 3100-3700 were? I'm tying to trace these wires so I know which one is which because the color codes given in another post do not match what I have.
Thanks,
MMC
One more thing... when I plug everything in and try to Enable GPS it gives me a communication error and says that in can't open communication port... I'm using OSTIA 3.25, Do I need a higher version?
Go to settings/connections and uncheck "beams" if it is checked you will have no com1 port which is the port the wired gps wants to use, also if you have a keyboard driver present you will need to disable the driver.
You're a frickn' Genius!!!! You just solved 24 hours of head scratching
THANKYOU!!!
hello everyone!
i have big problem now with my htc diamond!
what function is for that cable that i marked in pic? i acidently cut it off! and where can i get spare part of that cable if its posible ?
maybe this will help you
http://forum.xda-developers.com/showthread.php?t=413940
It's the service manual
Hey guys,
Im looking to unbrick my G1 (no bootloader). I have asked some questions previously but haven't had the time to do anything besides that up to now.
I haven't had any luck here in India locating what I need with confidence, but today I happened across a helpful website.
Could anyone tell me if this is what Im looking for?
wiggler-clone
robokits.co.in/shop/index.php?main_page=product_info&cPath=12&products_id=240
pc-serial
robokits.co.in/shop/index.php?main_page=product_info&cPath=6_64&products_id=64
The wiggler look-a-like says its compatible with GCC OCD.
The pc-serial page offers a driver under the name of pl230.
I am hoping to be able to follow the unbrick page here: wiki.cyanogenmod.com/index.php?title=JTAG_for_Dream/Magic
Thanks
The unbrick process originated on this forum and was really moved along by member ezterry. You really ought to read the threads here in the dev section about this. They do tend to be long, but there is every bit of information you could possibly want to know about unbricking a dream.
http://forum.xda-developers.com/showpost.php?p=5911627&postcount=302
http://forum.xda-developers.com/showpost.php?p=5934885&postcount=6
thanks for the links. i am currently working through the multitude of posts.
Hey,
I am learning a lot and have what i think is my last issue before i order some parts. The pc-serial cable should be at 2.8 v but i only have access to converters that give 5 v output.
I first consulted the datasheet for the pl2303hx (link provided above) which states:
"RS-232 VDD. The RS-232 output signals (Pin 1 ~ Pin 3) are
designed for 5V, 3.3V or 3V operation. VDD_232 should be
connected to the same power level of the RS-232 interface.
(The RS-232 input signals are always 5V~3V tolerant.)"
which was a little confusing, so i consulted the vendor:
"It will output 5V if the jumper is shorted or else it will be 0V. But the unit is self powered and can accept 3.3V input and output levels.
which is self contradictory. but, from what i gather, the serial output will be the same as the usb input.
Lastly, from this google group discussion:
groups.google.com/group/android-platform/msg/bf66abf4515132fb
Someone states that they used an lm317 circuit to drop voltage to 2.8, and it seems like this is the route ill take.
Question is, which voltage do i control? I think if i drop usb vcc voltage i should be good?
I think i just going to buy it and see, whats 400 INR anyways (its like 8 bucks)
salsavirdi said:
"RS-232 VDD. The RS-232 output signals (Pin 1 ~ Pin 3) are
designed for 5V, 3.3V or 3V operation. VDD_232 should be
connected to the same power level of the RS-232 interface.
(The RS-232 input signals are always 5V~3V tolerant.)"
Click to expand...
Click to collapse
If you can't understand that, then you should find someone to assist you who does.
I suppose im being a overly paranoid, and would like some corroboration. Id really hate to fry my phone, im rather attached to it.
I want to purchase a new usb data cable for SGS but don't know how to identify the original one(never used one).
Purpose:
Want to root my SGS.
And this thread suggests to use the "original" cable.
The research I have done so far:
Searched the web but was not able to figure out how to identify the one that comes with SGS.
All I can find is compatible ones whose MPN/PID I've provided below.
Had gone to the Samsung service centre and placed an order for the cable. Had called them up but it's still unavailable.
So I asked them for some sort of identification(MPN) of cable so I could order it online. They gave me this: GH39-01352A.
Some Samsung stores that I visited showed me two cables which had the following MPN/PID on them:
1] APCBU10BBE
2] ECB-DU4AWE
-----------------------------------
Whenever it comes to data transfer I use Moto Defy's cable to connect SGS and it works flawlessly.
It's rooting I'm skeptical about.
I tried using Framaroot but it failed.
Help me with the link to the usb cable in case I am not looking at the right place.
Also what are my options assuming the service centre doesn't get the cable?
aximeye said:
I want to purchase a new usb data cable for SGS but don't know how to identify the original one(never used one).
Purpose:
Want to root my SGS.
And this thread suggests to use the "original" cable.
The research I have done so far:
Searched the web but was not able to figure out how to identify the one that comes with SGS.
All I can find is compatible ones whose MPN/PID I've provided below.
Had gone to the Samsung service centre and placed an order for the cable. Had called them up but it's still unavailable.
So I asked them for some sort of identification(MPN) of cable so I could order it online. They gave me this: GH39-01352A.
Some Samsung stores that I visited showed me two cables which had the following MPN/PID on them:
1] APCBU10BBE
2] ECB-DU4AWE
-----------------------------------
Whenever it comes to data transfer I use Moto Defy's cable to connect SGS and it works flawlessly.
It's rooting I'm skeptical about.
I tried using Framaroot but it failed.
Help me with the link to the usb cable in case I am not looking at the right place.
Also what are my options assuming the service centre doesn't get the cable?
Click to expand...
Click to collapse
The cable that came with my SGS has the following ID:
APCBU10BBE
I think this cable should work.
Even if you can't find the original cable I don't see why you should have a problem flashing with a different cable.
I managed to flash my device many times using a Nokia cable (and some other cables too).