hello everyone!
i have big problem now with my htc diamond!
what function is for that cable that i marked in pic? i acidently cut it off! and where can i get spare part of that cable if its posible ?
maybe this will help you
http://forum.xda-developers.com/showthread.php?t=413940
It's the service manual
Related
Hey everyone, I'm trying to Wire a iGPS-180 for my SX56... the original wiring was for an iPAQ 3100-3700... I've got the pinouts for the SX56 but I was wondering if anyone knew what the pinout for an iPAQ 3100-3700 were? I'm tying to trace these wires so I know which one is which because the color codes given in another post do not match what I have.
Thanks,
MMC
One more thing... when I plug everything in and try to Enable GPS it gives me a communication error and says that in can't open communication port... I'm using OSTIA 3.25, Do I need a higher version?
Go to settings/connections and uncheck "beams" if it is checked you will have no com1 port which is the port the wired gps wants to use, also if you have a keyboard driver present you will need to disable the driver.
You're a frickn' Genius!!!! You just solved 24 hours of head scratching
THANKYOU!!!
I inadvertally took the ROM of a QTEK 2020 (not the 2020i) and now my 2020i seems to be dead.
No reaction at all. PLEASE HELP
Does it not display SERIAL or USB at the top of the screen ?
Hi, i am not very good with the technical side of advice, but if you dont have any luck at all in the future would you consider selling your 2020I as i am looking for some spare parts.
Yep! we don't want to look like scavengers, but if you don't manage to save your device, I'm in need of the full housing!!!
try plugging it into ANOTHER usb port and load another rom
problem solved
Hi, i'm spanish, sorry for my english...
two days ago that I broke the connector, and i buy a new connector in ebay, but is the same of the TYTN 1, i don't know if is the same or not :S
anyone know any "how to" to open the tytn II?
i have a welding station (aioyue) but i don't know if i've trained :S
any help? any council?
I don't know if the connector is the same or not but here's some disassembly guides, look for Kaiser:
http://michael-channon.mobile.spaces.live.com/ent.aspx?h=cns!4472423472DCFC38!287&fp=%2Ftop.aspx
Have you tried calling your carrier to see if they can replace your unit under warranty?
well i broke mine too but it as more htc's fault than mine as there are a couple threads on how the first gen kaiser mini usb ports were not made well and the usb plug is loose an can cause connection issues forcing you to wiggle and bend it inside the port thus breaking the plastic seperator between the pins and damaging pins..i called att warranty exchange and worked my way through techs and elevated support and just make it known to them (because they have no documentation on this issue and insist that they cant help you) and that you have many documents supporting your position and pictures and just dont let them win...demand support on this device and DONT let them tell you its physical damage and its out of warranty...let them know its the most high end device they have and how can they make something that that doesnt hold up to its standards blah blah blah...eventually after an hour you will get a replacement and they will note your account to avoid the $450 charge..here are some links to support your case if needed
http://forum.xda-developers.com/showthread.php?t=362679
http://forum.xda-developers.com/showthread.php?t=359695
anyone knows where i can find the same usb connector?
information about the disassembling of kaiser:
http://mikechannon.net/
Hy I have a Kaiser and I would know if there is the possibility to connect my smartphone to the Tv with this cable:
http://www.expansys.it/p.aspx?i=170917
I also see some post of xda and I see some thread talking about some software or drivers for the settings of tv out:
http://forum.xda-developers.com/showthread.php?t=452077
http://forum.xda-developers.com/showthread.php?t=419391
and also for the htc diamond:
http://forum.xda-developers.com/showthread.php?t=412350&page=20
could it be possible to do also on Kaiser??
(it's my first thread and I''m sorry for my english )
could someone help me??
The Kaiser does not have the necessary hardware for TV out, so even with all the necessary cables and software, it still won't work.
ok
thanks a lot
Hello,
Congratulations for this great site, I thank you in advance for the help you can give me. I bought a xperia z1 with a touch screen broken and the phone language is Chinese, could you tell me how I can change the phone language without using the touch screen in order to test the phone before change the digitizer screen.
Is there a parameter file to edit somewhere ?
thank you
cedric85 said:
Hello,
Congratulations for this great site, I thank you in advance for the help you can give me. I bought a xperia z1 with a touch screen broken and the phone language is Chinese, could you tell me how I can change the phone language without using the touch screen in order to test the phone before change the digitizer screen.
Is there a parameter file to edit somewhere ?
thank you
Click to expand...
Click to collapse
I think no
you can connect a mouse to it.it works very well and you can do anything with it.i connected my wireless( laptop's ) mouse with an otg cable.i think it works with wired mouses also u just need an otg.good luck
Sent from my Panasonic printer . Buy me a beer cause i'm alcoholic and i need more and more https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=HN6YQLDZT76EE
Otg cable and USB mouse and there you go