[Q] factory reset / wipe "failed" - Galaxy S III Mini Q&A, Help & Troubleshooting

Hello from a new member.
I am writing with a request for assistance to you because I know no help.
I wanted to play a new costumROM, but the wipe will not work.
Are installed TWRP 2.8 recovery than 10.1 and CyanogenMod as a system.
I booted into recovery and will perform there a factory reset, but I get the message "failed".
I have also tried several times, always with the same result. The attempt to "Advanced wipe"
only the cache, or other wipen also leads to "failed".
Yesterday I by Odin a new recovery re-flashed (TWRP 2.8.1 + 2.7.0), and thus is "failed".
Can anyone understand the error, or has an idea what is wrong? I am grateful for any help.
Greetings from Germany
PS: The OS runs without problems to get into recovery usually takes a while because it takes
several attempts (it takes forever, until the display indicating something). The ROM I want to flash,
it is only as zip, so I can not flash via Odin.
PPS: Sorry for my bad english, Google is my friend ...

Related

Failed update. Need help

Hey all.
I was using an old version of MIUI (RCxx, I don't remember anymore). And I decided to update to the latest. I copied the zip which is required to update but my recovery seemed to be broken. When I select anything from it, nothing happened. So I decided to flash kernel with another recovery. But something didn't go well and I got a picture with mobile phone, exclamation mark and PC on the display.
So I flashed Darky's reserruction ROM (which helped me many times) but it didn't boot. It stacked on Darky's boot animation. I wiped cache, system and data but it's now stacked on Galaxy S logo.
I'm still able to go in download mode. What should I do?
Thanks in advance.

[Q] Boot loop problem, cannot wipe data

I downloaded ROM Toolbox Pro, and installed a boot animation. Upon restarting, I became stuck in a boot loop that toggled back and forth between Corn Kernel's screen and the AT&T logo screen. I CAN get into CWM, however I cannot wipe all data. Of course I tried "install update.zip", reformatting, wipe dalvik cache, etc. I then installed Legend's KK4 Rom onto my SD Card and tried to flash that, but it won't install, keeps saying "Installation Aborted". I ALSO can connect my phone to my laptop with no issues, but I'm not sure what to do from there.
I am perfectly willing to flash back to stock, but I cannot wipe all data. Is Odin Master Clear my only hope? Any suggestions would be greatly appreciated at this point, as I have tried everything in the CWM menu and do not know what else to do.
Does anyone have any suggestions? I have searched this forum thoroughly, as well as Google. Just need a little guidance. Please, any help would be GREATLY appreciated.
You should be able to grab a stock ROM and flash it. No need for Master clear, the flashing of the stock ROM should take care of it.
Thank you, I'll try that now.

[Q] Updated to CM from Stock Need Help Restoring

I have an S5830D that I flash an CM7 rom to (APOCALYPSE-FINAL), I'm now looking at getting back to stock. I'm having trouble getting my CWM restore back. Now after doing some searching I realized I would need to flash a stock firmware version through odin. I went out and found what i believe is the correct firmware version for this Koodo model (the name is S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4_HOME.tar.md5) and tried to flash it.
Everything in odin goes through fine up to the point where it restarts the phone, Ill attach a screenshot of what shows up for me. After the screen shows up is when I get stuck in a bootloop where the phone model shows, then the koodo bootanimation shows followed by the samsung logo. I should note though I still have complete access to recovery, the downloader mode, and even the CM rom when i restore that backup. The fact I have access to all those gives me hope as I'm sure this could be reversed.
Any advice on how I can restore this phone to stock would be greatly appreciated. I'm not very familiar with samsung devices so please try to be patient with me as I realize I have gotten into something over my head.
PS Sorry about the glare on the image its the best I could do as it disappears quickly.
Jeklund said:
I have an S5830D that I flash an CM7 rom to (APOCALYPSE-FINAL), I'm now looking at getting back to stock. I'm having trouble getting my CWM restore back. Now after doing some searching I realized I would need to flash a stock firmware version through odin. I went out and found what i believe is the correct firmware version for this Koodo model (the name is S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4_HOME.tar.md5) and tried to flash it.
Everything in odin goes through fine up to the point where it restarts the phone, Ill attach a screenshot of what shows up for me. After the screen shows up is when I get stuck in a bootloop where the phone model shows, then the koodo bootanimation shows followed by the samsung logo. I should note though I still have complete access to recovery, the downloader mode, and even the CM rom when i restore that backup. The fact I have access to all those gives me hope as I'm sure this could be reversed.
Any advice on how I can restore this phone to stock would be greatly appreciated. I'm not very familiar with samsung devices so please try to be patient with me as I realize I have gotten into something over my head.
PS Sorry about the glare on the image its the best I could do as it disappears quickly.
Click to expand...
Click to collapse
If you have complete access to recovery mode, try wiping data and cache after flashing with Odin. That does the trick for me when I have a bootloop after flashing with Odin.
ImSoBored said:
If you have complete access to recovery mode, try wiping data and cache after flashing with Odin. That does the trick for me when I have a bootloop after flashing with Odin.
Click to expand...
Click to collapse
Agreed... reboot into recovery and clear cache and dalvik cache and then reboot.
So I've just completed a new flash with odin, I went in and flashed cwm then proceeded to factory reset, wipe cache, wipe dalvik, and I even do battery reset. Every wipe goes fine except for when I attempt to do the factory reset I received the following error:
Code:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
Even after those wipes it still bootloops but thats most likely as the factory reset didn't work.
Jeklund said:
So I've just completed a new flash with odin, I went in and flashed cwm then proceeded to factory reset, wipe cache, wipe dalvik, and I even do battery reset. Every wipe goes fine except for when I attempt to do the factory reset I received the following error:
Code:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
Even after those wipes it still bootloops but thats most likely as the factory reset didn't work.
Click to expand...
Click to collapse
Try not using CWM, or your SD card may be corrupt and you have to format it, I'm not sure though.
ImSoBored said:
Try not using CWM, or your SD card may be corrupt and you have to format it, I'm not sure though.
Click to expand...
Click to collapse
That did it, for some reason I had this thought in my head I had to flash cwm right away and clear stuff that way. Once odin finished I went in recovery and wiped data and cache through the stock recovery and it booted right up. Thanks for the help really appreciate it.

[Q] Razr i - no possibility to flash custom rom or stock - bricked?

Hallo together,
I seem to have done something wrong while trying to flash the rom "RazRi_JB_X-2014-Jul-16".
Here is what i did:
- Unlocked to bootloader using official Motorola homepage
- Flashed CWM (non-touch) recovery using "Recovery Flasher by LeBobo v1.7", USB-Debugging was on
- Rebooted into bootloader and flashed "RAZRiRoot2" to prevent Stock-ROM from overwriting the recovery
- Tried to install the Custom ROM using CWM, but it fails to wipe cache (stuck on line "Formatting /cache")
Because it didn't work, i tried to reset everything as it was before to be able to try again - flashed stock-recovery using the Recovery Flasher by LeBobo, booted into bootloader and selected "Factory". The cell is now just showing the "Warning bootloader unlocked" warning and nothing else happens.
When i try to select the recovery in the bootloader menu, an image of a Android laying on its back with an opened hatch and a red warning symbol showing a "!" appears and nothing else happens.
I seem to have bricked my device, because i cant't really do anything now - is there any solution?
I read through different topics but could not find a real solution to this particular problem...
Thank you so much in advance for your help!
It's not bricked
At the moment u enter stock recovery with that android and red warning sy,bol, u need to press bot volume up + downp. Than it will enter stock recovery mode.
Those are the following things u can do to get custom rom,
1. Flash another recovery, cwm touch, cwm non-touch, twrp. They all work a little different.
2. Flash the custom rom and wipe everything, The wip can take some time. sometimes it will be seconds, sometimes it will take a couple of minutes. Every recovery behaves different, and every flash/wipe too.
3. enjoy
If u really want to go back to stock, flash your stock JB firmware by RSD-Lite.
Thank you very much for your answer. I restored the stock rom using RSD Lite and did a clean install of TWRP.
Then I did a Factory Reset and started to install the custom ROM.
The TWRP is now stuck at "Flashing File 1 of 1 /external_sd/RazRi_JB_X-2014-Jul-16.zip".
Is it normal that it takes more than five minutes or is something going wrong here? Is there something i forgot?
StarGeneral said:
Thank you very much for your answer. I restored the stock rom using RSD Lite and did a clean install of TWRP.
Then I did a Factory Reset and started to install the custom ROM.
The TWRP is now stuck at "Flashing File 1 of 1 /external_sd/RazRi_JB_X-2014-Jul-16.zip".
Is it normal that it takes more than five minutes or is something going wrong here? Is there something i forgot?
Click to expand...
Click to collapse
5 minutes is a bit too much. But that's the problem with this device. Every device behaves different and we haven't found out a solution too it.
At the moment i can't do much for you. I can only say try to wipe the partitions mannualy. Wipe system, data and cache. and mount system. And then try to install it. Maybe if that doesnt do the trick try again another recovery.
This from KTR-ROM
Code:
- Enter in TWRP or CWM
- Wipes required: data, system, cache y dalvik
*In CWM mount system must format before (Mount and storage -> Mount system)
Thanks again - that was it.
For some reason, TWRP did not automatically wipe the system-partition. It had to be mounted + wiped manually.
Not the custom ROM is up and running well. Installation took 35 minutes for some reason though...
Thank you so much for your help!
StarGeneral said:
Thanks again - that was it.
For some reason, TWRP did not automatically wipe the system-partition. It had to be mounted + wiped manually.
Not the custom ROM is up and running well. Installation took 35 minutes for some reason though...
Thank you so much for your help!
Click to expand...
Click to collapse
nice, glad that it worked

[Q]Bootloop after Factory Reset of Rooted Stock Rom

As the title says I have the problem that I'm stuck in a bootloop. (LG Logo coming up over and over again)
May initial plan was to root the phone (for ClockworkMod, I used AIO-Toolkit), then do a factory reset and then make a backup of the Stock Sytem before attempting to flash the Custom Rom. So there is no Custom Rom on my Phone at the moment. The rooting worked fine and I was able to start it up. Then I turned it off again and entered the Recovery Menu (PWR + Vol -) and selected the option "wipe data/factory reset". Expecting that this would do a factory reset. Then I started it back up and it was stuck in the bootloop. I do have still access to the Recovery Menu. The ClockworkMod is on version 6.0.1.5. I already tried taking out the battery for a few seconds and starting up again and I also tried wiping the Cache and the Delvik Cache and apply the factory reset again. No change.
My Android is still on version 2.3.4 GB. So still the old bootleader as far as I know.
I hope the information I provided were helpfull.
Thanks in advance. I hope you guys can help me.
P.s.: I'm from Germany so my english is far from perfect. I hope it wasn't too bad ^^
FIXED IT!
Flashed a new 2.3.4 V20Q with SmartFlash.
Before that I had a V20R. I am not 100% sure what the difference is but it looks fine.

Categories

Resources