Hi all.
Was wondering why I get an error "unfortunately dialer has stopped" on about half the calls I make or receive. It starts to dial but then I get the error and it kills the call. Any idea what it may be and how I can fix it ? I am on benzo rom and latest gapps with included vindicator kernel.
I'm thinking it's a radio and /or baseband issue but don't know.
When I was on stock 5.1 on Rogers wireless it worked fine and I never had the issue. But on Rogers it said LYM47D and this ROM says LYM47I. Not sure if that makes any difference.
I entered the keypad code and verified that LTE is enabled and lte/GSM is selected.
I tried flashing the LYM47D radio in TWRP but that didn't help.
Any help would be much appreciated
Thanks a lot
Related
Hello all,
Every ROM I have tried to flash has come with some type of problem or another.
I have a SIM locked T-Mobile HTC One with a PTel SIM inside. I unlocked the bootloader, rooted the phone, and installed TWRP. Then, I downloaded several ROMs and tried to flash them (after doing wipe data and cache). Here are the specific problems I have run into with each ROM.
OneDroid: The screen keeps popping up "Unfortunately, Android Keyboard has stopped". After second boot, in addition to the other error message, the screen keeps popping up systemUI has stopped. The whole thing is just unusable.
Android Revolution HD: I am unable to obtain any phone signal.
ViperOne: Same issue, no signal.
InsertCoin: I can't get a proper HSPA+ connection due to incorrect APN settings. I have followed the directions on PTel's own website, but was unable to obtain data. It's a shame because I like this ROM the most of all.
MaximusHD: The only ROM to have worked properly.
I am sure I have done something wrong somewhere. I guess I'll just live with MaximusHD.
MaximusHD is completely stock with very minor changes. For other ROMs you have to select (or flash additional stuff) that you have T-Mobile device I think. But it is better to have their threads searched for "T-mobile".
Hey Guys,
I have seen multiple threads about 5.1 having an issue with SMS/MMS. My problem is that I do not get a signal at all. I did a full factory flash to Android 5.1 and now i get no connection what so ever. I have tried multiple combinations with toggling Enhanced 4G LTE mode and Preferred network type and nothing makes any difference. If I flash back to SOKP rc1 5.0.2 it works great. I have the latest bootloader and radio. Has anyone experenced this or have any tips?
Thank You,
DFL
Have you tried changing your APN? Try these settings https://support.t-mobile.com/docs/DOC-17581 ... Then delete all other APNs you're not using
@YankInDaSouth yeah, i did do that. after much trial and error i got it working. i ended up re-flashing the radio via fastboot, reset and the data/voice cam in.
thank you for the help,
dfl
Glad you got it all worked out!!
611 works for you?
611 not working for me. On stock rooted ROM.
i unlocked my sprint htc m8 by changing the cid to 11111111. after that network appeared in the phone, but i could only make outgoing calls, no incoming calls were shown on the phone, so i decided to root the phone thinking maybe it would solve the issue, so first i tried installing the ARHD rom, which was not made for sprint, so then i tried the nusenseven rom, after installing the rom there was no network in the phone , it was always searching for network , and i couldn't even search network manually as those options were greyed as it was only searching for network, but i was able to receive incoming calls on the phone without network , but coudn't make outgoing calls due to no network, same issue happened in the skydragon rom,
anybody help me out to solve the issue please.
Have you tried ##72786# or ##786#(if you have msl code)
And press reset at top right
I am having the same or similar issue. Since installing skydragon I have a constant message in my notifications saying that it's "unable to establish a wireless data connection". No problem with wifi.
EVOuser94 said:
Have you tried ##72786# or ##786#(if you have msl code)
And press reset at top right
Click to expand...
Click to collapse
after pressing the above codes nothing appeared, where to press reset
Sounds like your missing EPST options, that's odd, can you flash Stock Rooted ROM and do that code.
If you flashed a rom that was not Sprint compatible (ARHD is not as far as I know) you messed up the partitions and the only way I know of to fix it is to RUU and start fresh.
ok, i again started again with stock and then a compatible rom with htc m8 sprint that is skydragon, still the phone has no network but i'm able to receive call, i don't know how.
in stock rom i was getting network with no incoming calls.
404fnf said:
ok, i again started again with stock and then a compatible rom with htc m8 sprint that is skydragon, still the phone has no network but i'm able to receive call, i don't know how.
in stock rom i was getting network with no incoming calls.
Click to expand...
Click to collapse
Did you RUU?
If not it's not going to fix you issue.
Sloth said:
Did you RUU?
If not it's not going to fix you issue.
Click to expand...
Click to collapse
yes i did the ruu.,,, actually the problem was different, later after flashing i realized that the sim unlock method only works till lollipop, and i was trying with the marshmallow, so problem solved now,
thanks for the help
now the only problem i'm getting is that mobile data is not working,
Hello Everyone...
Posting here first rather than in the "Update Failure" thread because I'm not so sure I have a "failure" with the update....just an issue after the udpate.
I have 2 cloned HTC M9 phones. I say "cloned" as they are exactly the same make, model, ROM, etc (one business, one personal phone). They have the following information if needed:
Sprint HTC M9
SuperSU Free v2.65
Custom ROM ViperOneM9 3.5.0 with no custom kernal
Android 5.1
HTC Sense 7.0
Kernal (standard) 3.10.49-perf-g26c593c
[email protected] #1
SMP PREEMPT
I updated some apps this as I normally do through Google Play. A little while afterward I was prompted to update the SU Binary. I did so on one of my phones. I hit the TWRP option (on the right side of the prompt screen), nothing happened, phone did not reset so I rebooted into recovery. The update ran automatically and the phone rebooted.
I noticed two issues (perhaps there are more). The huge problem is that I cannot make OUTGOING calls. I use a custom dialer PixelPhone Pro. I click on a contact to dial and nothing happens. I type in number to dial, hit the green "send" button to make the call, nothing happens.
I also tried the stock Phone app....same thing, cannot dial out.
I attempted to update the Profile and PRL for the phone, however, as that appears to need to make a "special call" that function is not working either
The other problem I noticed is with an app I have called Quick Settings. The app is always accessible through the pull-down notifications on the phone. Although the app is still installed and functional, it no longer appears in the pull-down notifications. I tried to reset the option to show it there (turning the option off and back on) and it will not show up despite the proper setting chosen.
I still have full root access as I tried a couple root apps (such as Titanium Pro) and have full root access.
I have been prompted on my other phone to update the SU Binary and I am concerned with doing so. Any idea why this is happening and how I can troubleshoot and fit my outgoing call issue??
THANK YOU all very much!!
Scott
Hey guys....
Anyone else have this issue or similar?? So what are my options....how do I get my phone back to being able to make calls??
Thank you for your help....
Scott
Scudderb said:
Hey guys....
Anyone else have this issue or similar?? So what are my options....how do I get my phone back to being able to make calls??
Thank you for your help....
Scott
Click to expand...
Click to collapse
**UPDATE**
Still problems....
Right after I first updated the binary the "only" problem was that I could not make calls which I could use the other functions of the phone. I rebooted the phone and I cannot reach any function of the phone because I constantly get the message "...the process com.android.phone has stopped" obviously related to the previous problems.
I dirty-flashed the ROM...that did no help. I even tried to flash an older SuperSU version (I don't know what that would have done....I'm running on HOPE now ) and that didn't help. Re-dirty-flashed the ROM a second time. Again that didn't help.
I flashed an old backup and THAT WORKED fine. Problem is that the backup is 6 months old. I could quit and totally clean/wipe/install the ROM and start again from scratch but I reeeeeeallly don't have time for that at the moment.
Is there ANY way I can simply get my com.android.phone process back?? Why did all this happen in the first place??
ANY help is greatly appreciated!! THANK YOU!!!
Hey guys! My Le-X526 is not able to send or recieve SMS at all. It was previously not working only with Jio but was working fine with airtel, now it isn’t working on both. Airtel still receives but when I try to send the balance is deducted and it says sent but I don’t receive the message on other phone and sometimes it straight shows up not sent and on jio? Completely blocked both ways. Nor does it receive any message nor does it send. I’ve tried various custom roms until now, flashed the 19s bootloader but it’s still the same, nothing wrong with the apn settings. VoLTE is working fine, mobile data is and so are calls.
What must’ve caused this guys? Is it hardware problem or did I **** up somewhere? It was working all fine before, it just happened out of blue.
What should I do?
Should I go back to stock? HELP PLS :crying:
Solved for me.
I installed stock, dialled *#*#4636#*#*.
Chose sim 0 or 1 (jio)
Enable option called SMS over SMP Or something.
At end update smsc number.
Voila.
Done.
Enjoy.
Not gonna find in custom ROM s dialer. So try n fix in stock ROM n then move to custom ROM.
I met a similar problem before, then I flash 2 different stock roms and it works again.