Database Develop

[Q] (Q) Hardbricked phone and usb doesnt work

It all started when my phone didnt connect to the pc with my own microusb cable anymore. After lots of reinstalling drivers i tried another usb port, now the phone did connect. In a rush i started up odin to flash standard firmware so i could get my warranty for the usb failure. Then during the flash the phone lost connection again and hardbricked. I can only get it to download mode but the phone has the usb problems mentioned before again, i cant connect to odin/kies/pc. all pc's told me that the usb driver could not be installed

try removing all usb drivers with usbdeview, make sure that KIES aint running in the background, boot phone into downloadmode, connect is and as soon as you'll see the yellow com-port sign; hit start (with the proper .tar files at pda/phone/csc).
only one way to find out =/

Thanks for the help but the problem is that the yellow com-port sign wont come because the device isn't recognized.

You have download mode but no USB .
Remove existing KIES and all USB drivers reboot reinstall KIES and try .
Not work try on a different PC .
But unless you have fixed the initial error you are wasting your time .
Initial Error you said >>>It all started when my phone didnt connect to the pc with my own >>>>> microusb cable <<<<<<<<<<<<< anymore
jje

Tried another cable and another computer, still no connection. I think probably an internal failure in the phones motherboard?

Cant put my x8 to flashmode ..y x8 to flashmode

As the title says guys, i cant put my x8 to flashmode ... when Im pressing the back button , and im pluging in my phone to computer , the Green flashmode diod its not appearing ... a also cant connect my x8 to computer even though i installed latest PCC. Yes i did full wipe and also install another ROM but it doesnot help Really guys please help me with my problem because im running out of ideas what to do ..

Did You install drivers from Flashtool folder?
And - does Your x8 recognize the charger? Cause maybe USB port is damaged.

i did install Gordon's Gate..
Well when i plug in the cable my x8 is charging ..
i also tried to connect my brother x8 to the computer but the same thing happens , i cant enter flashmode and i cant see my sdcard ..
oh yea i forgot to add that the same cable its working on my other computer but not working on this one ;(

You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!

sidkota said:
You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!
Click to expand...
Click to collapse
yes thats exactlly what im doing , yesterday it was working perfectly but now it does not . But the key is that the green light its not appearing.I don't know what is the cause of that.

Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!

sidkota said:
Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!
Click to expand...
Click to collapse
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately

Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working

Bolussimo said:
Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working
Click to expand...
Click to collapse
i did 3 times

proadi96 said:
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately
Click to expand...
Click to collapse
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!

sidkota said:
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!
Click to expand...
Click to collapse
OK i tried to look for the drivers but as far as i can see they are not there.Hey does PCC still installs the drivers automatically? because some time ago i remember it was , it was actually saying ''installing drivers'' or something like this , but now i downloaded the newest version and there is only install bar , not any other as it was in previous versions ... maybe thats the cause that i dont have proper drivers?

I have this problem too week ago. I tried to connect and disconnect the usb. Didnt work. When i checked again, usb port on my computer didnt mount my usb cable correctly.
thanks for the thanks......
Sent by my sexy orange W8 using XDA app...................

Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...

proadi96 said:
Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...
Click to expand...
Click to collapse
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s

Pull out all usb connect to pc, uninstall all usb port driver , from system manager, restart pc. plug in you phone.
Sent from my thumb using my eyes

biscoitu said:
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s
Click to expand...
Click to collapse
everything is falling apart because it stopped working even on my laptop ;/ I removed all the drivers by the program you provided , Now i will restart my PC and see if its working or not
and PS. I dont have original cable for my x8 ! But it was working and now its not ..

pc doesn't recognize phone in download mode

i got a problem with download mode.
i can put the phone in download mode by pressing vol- / home / power but the pc doesn't recognize him but just in download mode.
i have twrp recovery and i tryed to instal new rom but it show me E: signature verification failed so after i wanted to instal new rom throught odin but ...
any help please? thanks

Fix the drivers with kies troubleshooting connection.
Sent from the dark side on my GT-I8190

so when i connect phone with kies everything work great. but i cannot connect phone in download mode with odin.
now windows shows that it was unable to find u8500 USB ROM

Everything points to a driver problem. Weird.
Sent from Spaceball One.

i tried on two pc's but same result

lubos07 said:
i tried on two pc's but same result
Click to expand...
Click to collapse
Use a usb on the backside, with original cable if nothing else works. Launch Odin. Put phone in download and connect cable.

Did you enable usb debugging??
Sent from the dark side on my GT-I8190

tys0n said:
Use a usb on the backside, with original cable if nothing else works. Launch Odin. Put phone in download and connect cable.
Click to expand...
Click to collapse
i tried but nothing happens

iKlutz said:
Did you enable usb debugging??
Sent from the dark side on my GT-I8190
Click to expand...
Click to collapse
of course it is enabled

Usb debug doesnt matter. Download mode works either way. If you cant boot normal to activate it, you can still flash new fw through Odin.
Open task manager and kill all process with kies and try again.
Sometimes they interfere each other.

i killed 2 process with kies but again nothing happens.
the odin can recognize phone when is turn on but if is in download mode the odin cannot recognize phone.

Or exit any Anti–virus software you may have as well.
Sent from my GT-I8190 using xda premium

ok guys
after fresh win instal everything work grat :laugh:
anyway thanks you

lubos07 said:
i got a problem with download mode.
i can put the phone in download mode by pressing vol- / home / power but the pc doesn't recognize him but just in download mode.
i have twrp recovery and i tryed to instal new rom but it show me E: signature verification failed so after i wanted to instal new rom throught odin but ...
any help please? thanks
Click to expand...
Click to collapse
mate use original usb cable don't use other fake ones

Desparoux said:
mate use original usb cable don't use other fake ones
Click to expand...
Click to collapse
How should this matter at all? What are fake usb cables? USB 1.0 to 2.0 has the same standard - a set of to wires that hast to handle 5V+ (and max 1.8A with dedicated chargers, if you use USB 2.0 and especially MicroUSB-B slot on the 2nd side) and ground, and 2 wires for data (+ Data and - Data). Micro-USB has another 5th wire to check, if host or slave connection method is used. Technically all USB cables are interchangable.

rarog said:
How should this matter at all? What are fake usb cables? USB 1.0 to 2.0 has the same standard - a set of to wires that hast to handle 5V+ (and max 1.8A with dedicated chargers, if you use USB 2.0 and especially MicroUSB-B slot on the 2nd side) and ground, and 2 wires for data (+ Data and - Data). Micro-USB has another 5th wire to check, if host or slave connection method is used. Technically all USB cables are interchangable.
Click to expand...
Click to collapse
Yes, in theory they're all the same but they do come in different qualities and it's a well known fact that changing usb-cable can be the differens for a successful flash.

tys0n said:
Yes, in theory they're all the same but they do come in different qualities and it's a well known fact that changing usb-cable can be the differens for a successful flash.
Click to expand...
Click to collapse
In that case I had the luck to use only good cables, I never had any problem besides cases, where the cable was broken, so the contacts were not always closed. But this was a problem with normal USB connection, too, so I got rid of it anyway.

U think so but its has diff quality so u need to use original cables use and see what I really mean
Sent from my GT-I8190 using xda premium

Go To TecnicalServis Usb Daata connect point repair.

HTC one M7 no OS and recovery won't detect OTG and no fastboot usb

ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.

maniunique01 said:
ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.
Click to expand...
Click to collapse
Try to press volume down + power off buttons to enter fastboot mode.
You have to find a bright light, move your phone closer to the light, the light sensors should face the light, then press those buttons. I dont know why the light but it worked for me. I used a lamp as you can see in the aatachment.

maniunique01 said:
ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.
Click to expand...
Click to collapse
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
mose_nd said:
Try to press volume down + power off buttons to enter fastboot mode.
Click to expand...
Click to collapse
Hes phone already booted in bootloader/fastboot mode.
You have to find a bright light, move your phone closer to the light, the light sensors should face the light, then press those buttons.
Click to expand...
Click to collapse
This trick is used for phones that refuse to power on, not for the problems described above.

alray said:
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
Hes phone already booted in bootloader/fastboot mode.
This trick is used for phones that refuse to power on, not for the problems described above.
Click to expand...
Click to collapse
THAK YOU ALRAY AND MOSE, I'm too guessing that it could be the usb port, Because I tired everything which you guys have mentioned in the reply and received all negative results and I think I may have to replace my mobile usb port. Will let you know guys and again thank you so much.

alray said:
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
Hes phone already booted in bootloader/fastboot mode.
This trick is used for phones that refuse to power on, not for the problems described above.
Click to expand...
Click to collapse
Okay,

Hi guys, thanks for the comments, i did try the above-mentioned procedures and nothing came out in positive and i even replaced mobile usb port still no detection another htc m7 of mine gets detect and when i use the same port and usb mine doesnt get detected what can be done ?
Thanks in advance.

device is rooted,twrp installed bt no os with usb not recognized

My HTC m7wls gt brick while trying to flash a rom .now my device is with no os and USB unrecognized by PC but twrp is still installed.
Will otg cable recognized my phone in twrp mode, from my search otg cable can be used to transfer file without cord

Pls how do make make otg usuable on my twrp cox I can't seem to make it work with all my try....here is the ss

This is wat system is sayiny aft changing the port

Change cable.
Change port.
TWRP should support OTG, but YMMV, it's very device dependent.

horlamedyy said:
This is wat system is sayiny aft changing the port
Click to expand...
Click to collapse
As I said in PM, you absolutely need a working usb connection. If you already tried everything suggested in our PM chat and what said in the previous post, I don't have any other ideas. Check your computer drivers, phone drivers. Make sure to connect your phone directly to your computer (do not se external usb hub/ports, use the ones that are soldered to your computer MB. Avoid usb 3.0 ports, use 2.0. Try with someone else computer...