[Q] GG1 Bricked - Samsung Galaxy Gear

Hi all
I've been trying for weeks for a solution so finally making a post of my own.
I have a GG1 that I've been trying to get working on my HTC One M8 and it's all gone a bit wrong.
I had tried to Flash TWRP and then Null ROM but couldn't get it to work. I then tried to downgrade from Tizen using the Pit file and 2 .tar files that are on this forum but now it's just not doing anything like what it should.
No matter what I do (Re-partitioning, flashing stock/TWRP, flashing MK7) all I get is the Samsung Logo splash screen on boot - 'no matter what'. Any way you guys can suggest to completely start again with this? Perhaps a new Pit file that isn't the downgrade?
I can open Download mode and recovery (when TWPR is flashed) no problem. But if I try to flash anything in TWRP, all I get is something like 'E:Unable to mount /data/' - same if I try to sideload - though pushing files via adb seems to work.
Oh, it's the UK GG1 V700.
Thanks in andvance

catfinger said:
Hi all
I've been trying for weeks for a solution so finally making a post of my own.
I have a GG1 that I've been trying to get working on my HTC One M8 and it's all gone a bit wrong.
I had tried to Flash TWRP and then Null ROM but couldn't get it to work. I then tried to downgrade from Tizen using the Pit file and 2 .tar files that are on this forum but now it's just not doing anything like what it should.
No matter what I do (Re-partitioning, flashing stock/TWRP, flashing MK7) all I get is the Samsung Logo splash screen on boot - 'no matter what'. Any way you guys can suggest to completely start again with this? Perhaps a new Pit file that isn't the downgrade?
I can open Download mode and recovery (when TWPR is flashed) no problem. But if I try to flash anything in TWRP, all I get is something like 'E:Unable to mount /data/' - same if I try to sideload - though pushing files via adb seems to work.
Oh, it's the UK GG1 V700.
Thanks in andvance
Click to expand...
Click to collapse
Sounds confusing. Not knowing exactly what you tried or what you have flashed, start over. If you can get to download mode try putting on a stock image and see what that gets you. Its not bricked if it boots and you can get to download and recovery. Sounds more like a cable issue, bad download or something. Here's my copy folder that has ne9 and nf1, do ne9 first as nf1 is not a full ROM.
---------- Post added at 03:38 PM ---------- Previous post was at 03:30 PM ----------
catfinger said:
Hi all
I've been trying for weeks for a solution so finally making a post of my own.
I have a GG1 that I've been trying to get working on my HTC One M8 and it's all gone a bit wrong.
I had tried to Flash TWRP and then Null ROM but couldn't get it to work. I then tried to downgrade from Tizen using the Pit file and 2 .tar files that are on this forum but now it's just not doing anything like what it should.
No matter what I do (Re-partitioning, flashing stock/TWRP, flashing MK7) all I get is the Samsung Logo splash screen on boot - 'no matter what'. Any way you guys can suggest to completely start again with this? Perhaps a new Pit file that isn't the downgrade?
I can open Download mode and recovery (when TWPR is flashed) no problem. But if I try to flash anything in TWRP, all I get is something like 'E:Unable to mount /data/' - same if I try to sideload - though pushing files via adb seems to work.
Oh, it's the UK GG1 V700.
Thanks in andvance
Click to expand...
Click to collapse
Edited my post. Responding incase you read the original one.

Ducter said:
Edited my post. Responding incase you read the original one.
Click to expand...
Click to collapse
Thanks mate, that worked. I now have the watch back to asking me to pair with a phone.
One last thing, can you point me in the right direction to getting this rooted and ROMed without having to connect to a Samsung first? I'm on HTC One M8 so can't go down the cydia impactor route.

catfinger said:
Thanks mate, that worked. I now have the watch back to asking me to pair with a phone.
One last thing, can you point me in the right direction to getting this rooted and ROMed without having to connect to a Samsung first? I'm on HTC One M8 so can't go down the cydia impactor route.
Click to expand...
Click to collapse
People have different degrees of success with your set up. Here is a post you can read and decide for yourself. Other option is go back to android on your watch, specifically null, try that. If it fails you can delete...forgot the exact name sec.setup.Samsung or something like that from the null zip then flash it, basically turns your watch into full blown android but missing most the watch features leaving you with finding third party apps to do what you want.
I got fed up trying to get my watch working with my note 3 on aosp lollipop and ended up flashing a Samsung ROM. On kit kat everything worked well enough for me, lollipop, not so much.
if you used the ROMs I linked they are rooted already. Just Google galaxy gear on non Samsung phone, you'll find plenty of info.

Related

Need Stock Firmware G900AUCU2AND3!!!

I need the Stock Firmware version G900AUCU2AND3 So that I can flash back to stock. In the thread return to stock it has the previous version G900AUCU1ANCE. I get a error when trying to odin back (SW REV CHECK FAIL : [about]Fused 2 > Binary 1). So I am not sure how its done but need someone who has it do a dump or how ever its done to get it in a way that it can be flashed either by odin or in recovery... Any help will be appreciated... Thanks
i will need this too, i have my phone on at&t next and after a year i can trade it in, but if its custom os and stuff i cant return it, so i will need this too if i want to return to stock so i can upgrade to a new phone next year.
Bump: This is needed very badly. As I imagine many people had to take that bloat ware update. If anyone that has this firm ware has a problem and needs to restore back to stock. They won't be able to use the one that's listed in on this forum as its the older one, and now that there is Root. Its very likely this will happen daily that people will need it. I don't know exactly what soft bricked my phone so it can happen to anyone. My phone was fine until a reboot. Please, please, please. I'm begging everyone that has it. I asked Samsung and they wouldn't help. Next maybe going to AT&T store and having warranty claim done. I don't really want to find the out come of that.
I need this very badly as well. I rooted my phone and then tried to alter my screen density via an app I found on Google Play. It requested root, I granted the permission and then when the phone rebooted it hung on "Samsung Galaxy S5" splash screen and will no go any further. ODIN will not allow me to flash G900AUCU1ANCE firmware since I did the OTA update. If anyone could post up their G900AUCU2AND3, I would appreciate it very much.
kwikrat said:
I need this very badly as well. I rooted my phone and then tried to alter my screen density via an app I found on Google Play. It requested root, I granted the permission and then when the phone rebooted it hung on "Samsung Galaxy S5" splash screen and will no go any further. ODIN will not allow me to flash G900AUCU1ANCE firmware since I did the OTA update. If anyone could post up their G900AUCU2AND3, I would appreciate it very much.
Click to expand...
Click to collapse
I estimate we will get @ least One to two of these per-day until we get the files. Since we now have Root. It may take a bit as At&t version don't seem to have much for devs. Or ones that care to really help.(I'll probably get reamed for this. Sorry for you that help and for your time) I contacted At&t they told me they could not help but I could send my phone in for warranty exchange. Its that or go to BestBuy and they can flash it back. I don't have a Bestbuy Nearby.
Guys, check that post. Shortydoggg found a temporary fix for any soft bricks. It's for extreme cases. My phone is fine (apart from some deleted stock apps) so I'll hold off until i get some more info but if you cant boot at all, his method should come in handy.
http://forum.xda-developers.com/showthread.php?t=2785185&goto=newpost
+1 :highfive:
NotDavid said:
Guys, check that post. Shortydoggg found a temporary fix for any soft bricks. It's for extreme cases. My phone is fine (apart from some deleted stock apps) so I'll hold off until i get some more info but if you cant boot at all, his method should come in handy.
http://forum.xda-developers.com/showthread.php?t=2785185&goto=newpost
Click to expand...
Click to collapse
Thank you. The above link solved my problem. I am back up and running! At first data wasn't working other than wi-fi but I merely had to re-enter my APN that I got from here: http://forum.xda-developers.com/showthread.php?t=2746380 :good:
can you update to G900AUCU2AND3 after flashing this?
dave1977nj said:
can you update to G900AUCU2AND3 after flashing this?
Click to expand...
Click to collapse
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.
pcidiot said:
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.
Click to expand...
Click to collapse
Thanks!!! :good:
pcidiot said:
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.
Click to expand...
Click to collapse
A flash of the CSC file restores the APN after flashing the AP file, or flashing it together with the AP file, but it factory resets the phone. Flashing the AP file only is mostly for those who do not want a factory reset. But, a factory reset along with flashing only the AP file will indeed wipe the APN. I found all of that out through trial and error.
shortydoggg said:
A flash of the CSC file restores the APN after flashing the AP file, or flashing it together with the AP file, but it factory resets the phone. Flashing the AP file only is mostly for those who do not want a factory reset. But, a factory reset along with flashing only the AP file will indeed wipe the APN. I found all of that out through trial and error.
Click to expand...
Click to collapse
Thanks for your trials this will be useful to many.
pcidiot said:
Thanks for your trials this will be useful to many.
Click to expand...
Click to collapse
No problem.
dave1977nj said:
can you update to G900AUCU2AND3 after flashing this?
Click to expand...
Click to collapse
Yes do not root first, flash it then wait a few minutes then do a check for updates it will download the crap update with the yp yellow pages app,
then reboot and root
and take it away !!
pcidiot said:
Bump: This is needed very badly. As I imagine many people had to take that bloat ware update. If anyone that has this firm ware has a problem and needs to restore back to stock. They won't be able to use the one that's listed in on this forum as its the older one, and now that there is Root. Its very likely this will happen daily that people will need it. I don't know exactly what soft bricked my phone so it can happen to anyone. My phone was fine until a reboot. Please, please, please. I'm begging everyone that has it. I asked Samsung and they wouldn't help. Next maybe going to AT&T store and having warranty claim done. I don't really want to find the out come of that.
Click to expand...
Click to collapse
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!
Achilles5410 said:
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!
Click to expand...
Click to collapse
There should only be two boxes checked in odin thats f. reset time and auto reboot. Also Make sure you only check and load your firmware in the ap slot in odin. Now flash.
Achilles5410 said:
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!
Click to expand...
Click to collapse
Are you following this guide?
http://forum.xda-developers.com/showpost.php?p=53454972&postcount=1
shortydoggg said:
Are you following this guide?
http://forum.xda-developers.com/showpost.php?p=53454972&postcount=1
Click to expand...
Click to collapse
Yea I did thank you. Did it today and thanked the poster too.
Want to start over! Need help!
So I want to do whats written out in step 4 of shorttydogs thread but I don't want to mess up or brick my phone. My goal is to start over and go back to stock with bloatware and everything that is available on stock if I were to go AT&T and buy it today. Here is a little background on my phone. My phone is rooted and I do have safestrap (and busybox). I backed up everything on my microSD card. I also have the g900AUCU2AND3 firmware on my phone. In addition, I deleted some but not all AT&T bloatware, which I want back. Lastly, for some reason the "add call button" during my calls is missing and was replaced with a "record" button I think this was because of me playing around with xposed. I deleted xposed framework as well as wanam and tried everything to get the "add call button" back but I couldn't. Thus, I just want to go back to stock to fix all these issues. I just have a few questions before I proceed just to make sure I'm not doing anything wrong.
1) If I flash the AP, CP and CSC files will I achieve 100% stock with bloatware?
2) Will this return my "add call button"?
3) Is it as simple as just using odin 3.09 and flashing the AP, CP, and CSC files?
4) I also understand that this will take me back to G900AUCU1ANCE but will I be able to do an OTA do go to G900AUCU2AND3?
5) Is there anything else I need to know to prevent my phone from bricking!
Sorry for the long post but I am fairly new to this stuff and don't want mess anything up!

i'm stumped. s5 will not boot past samsung logo

after a FULL wipe bad flash to cm12 on my part, i restored with odin 3.09 with g900auc1ance firmware. it shows success on odin, but upon reboot, i still get the samsung "custom" with open padlock. then it attempts to boot and the samsung logo does it's thing and only completes about 80% of the logo, then goes dead/blank with blue led lightly pulsing. i took it to bestbuy to the samsung kiosk hoping the tech could help. he scolded me and showed me his at&t s5 running cm12. i'm stumped. any help would be appreciated.
i've rooted and rommed every android i've had and have always been able to fix it., all thanks to XDA.
Could it have been a bad download of ANCE. I've seen that happen before. Either a bad download or a bad transfer from comp/phone to sd card. I'd try re downloading
will do
will try that now. hoping it works.
nope. tried and same results.
Perhaps try Odin 3.10? Could it be that simple.
Also did you try a different source for the file you were trying to flash?
magnumglock said:
after a FULL wipe bad flash to cm12 on my part, i restored with odin 3.09 with g900auc1ance firmware. it shows success on odin, but upon reboot, i still get the samsung "custom" with open padlock. then it attempts to boot and the samsung logo does it's thing and only completes about 80% of the logo, then goes dead/blank with blue led lightly pulsing. i took it to bestbuy to the samsung kiosk hoping the tech could help. he scolded me and showed me his at&t s5 running cm12. i'm stumped. any help would be appreciated.
i've rooted and rommed every android i've had and have always been able to fix it., all thanks to XDA.
Click to expand...
Click to collapse
Number one you CANNOT run CM 12 or ANY AOSP or custom kernel on the G900A due to the locked bootloader whoever told you that flat lied to you
I'm assuming you've taken the 444 update correct??
Go to this thread http://forum.xda-developers.com/showthread.php?t=3021120read OP scroll down to the troubleshooting section and download the downgrade to NCE rar. Extract the downgrade to NCE tar md5 place phone in download plug it in and using Odin 3.09 place the tar in the ap slot then flash let it complete wait til phone boots then you'll be back to bone stock NCE phone.
I did the 4.4.4 and I'll give this a shot this evening. Again, thank you for the help.
*edit*
I have not tried Odin 3.10. I downloaded the files from the restore threads link to a google drive storage.
Odin 3.10 works fine. Don't forget to wipe cache and Davi. Sometimes that's all you need. And I agree, do some research first before you try flashing anything. Our locked bootloader makes us different.
Will do. I'll update what I find this evening.
magnumglock said:
I did the 4.4.4 and I'll give this a shot this evening. Again, thank you for the help.
*edit*
I have not tried Odin 3.10. I downloaded the files from the restore threads link to a google drive storage.
Click to expand...
Click to collapse
OK I figured you took the 4.4. 4 update go to the link I provided and if you read OP it states that if one has trouble with the first downgrade rar to go to the troubleshooting section.
Download the Downgrade to NCE rar in the troubleshooting section and extract the Downgrade to NCE md5 tar.
Using Odin 3.09 put phone into download mode plug it in you'll see added in the box.
Place the Downgrade to NCE tar md5 file into ap slot and press start it will work. I've done it several times myself and helped quite a few people in your place as well
Let phone completely boot up and you'll have a bone stock device ready to start over.
OPOfreak said:
OK I figured you took the 4.4. 4 update go to the link I provided and if you read OP it states that if one has trouble with the first downgrade rar to go to the troubleshooting section.
Download the Downgrade to NCE rar in the troubleshooting section and extract the Downgrade to NCE md5 tar.
Using Odin 3.09 put phone into download mode plug it in you'll see added in the box.
Place the Downgrade to NCE tar md5 file into ap slot and press start it will work. I've done it several times myself and helped quite a few people in your place as well
Let phone completely boot up and you'll have a bone stock device ready to start over.
Click to expand...
Click to collapse
this solved my problem. i cannot express how appreciative i am for your help.
magnumglock said:
this solved my problem. i cannot express how appreciative i am for your help.
Click to expand...
Click to collapse
A simple thank you is sufficient I'm glad you're squared away now.
The good thing is now if you soft brick your device you know how to get back to stock.
Happy flashing :thumbup::thumbup:
The same exact thing has happened to me.
OK, I am panicking now. My ATT GS5 is doint the exact same thing.
I will try the NCE rar too and let ya'll know how it went.
---------- Post added at 11:27 PM ---------- Previous post was at 10:59 PM ----------
Dodged that bullet. Got rid of Custom status too. Very cool
I am having the same issue but with a "there is no PIT partiton" error
I have tried everything that I could to get my phone working again. I even downloaded a so called pit file that apparently didn't work because the error keeps coming up. Is there a legit PIT file that I can download and if so could someone please point me in that direction? Also if someone could please help me to get my phone working again I would also appreciate that. I just bought this phone off of ebay and I am trying to get it working as my regular phone. when I start the phone up there are two lines at the top of the screen 1 is a white line that says MMC read fail error or something to that effect, and there's another line in red that says movinand confirmation error. After about 3 to 4 minutes of waiting the phone will go into download mode by itself and give me a whole bunch of lines one of which will say: Knox 0x0.
is there a way I can either repair or repartition the phone? I spent 6 hours trying to figure this out. I am tired.
Thanks in advance for any helpful response.

Can't unroot my s4

I need to return my s4 and I want to reset it to the system defaults and remove root access. My problem is that I think I messed up downloading TWRP recovery because ever since then I can't access recovery mode, it just goes to Odin mode/download mode. TWRP doesn't matter though, I don't need to recover anything in this phone I just want it to be reset. So I tried flashing stock rom through Odin but it takes a out 10 seconds then it says it's done and when my phone reboots absolutely nothing changed. I didn't download any custom roms so I would even be fine with just being able to take all my personal data off and factory reset it but I can't do that. Any help is appreciated!
mike_n_ike said:
I need to return my s4 and I want to reset it to the system defaults and remove root access. My problem is that I think I messed up downloading TWRP recovery because ever since then I can't access recovery mode, it just goes to Odin mode/download mode. TWRP doesn't matter though, I don't need to recover anything in this phone I just want it to be reset. So I tried flashing stock rom through Odin but it takes a out 10 seconds then it says it's done and when my phone reboots absolutely nothing changed. I didn't download any custom roms so I would even be fine with just being able to take all my personal data off and factory reset it but I can't do that. Any help is appreciated!
Click to expand...
Click to collapse
Do you have the U.S./A.T.&T. model (SGH-i537) or the international model (SGH-i9295) and were you on kitkat or lollipop? And where did you get the stock file you were trying to flash through Odin?
I have the Verizon SCH-I545 (NK1) on 4.4.2. And I got it from the galaxy s4 root website link to customroms.net
mike_n_ike said:
I have the Verizon SCH-I545 (NK1) on 4.4.2. And I got it from the galaxy s4 root website link to customroms.net
Click to expand...
Click to collapse
Oops you're in the wrong forum, this forum is for a different phone. The forum for that phone can be found here. Since I don't have that phone (neither do most people on this forum, I'm guessing) I have never used that forum. However, a brief glimpse indicates this thread might have the solution you are looking for. If not, this other thread looks pretty useful too.
In the future, please make sure you're posting in the forum for the correct device.
Edit: It also sounds like you might have downloaded the wrong file(s)
Oops! I'm new to posting on the xda forums I apologize. Thank you for your help though!

Bricked

It seems that I may have flashed one to many times or something else is playing up. Anywho, I came to check my phone this morning and everything was working fine. Checked the battery status and I thought it was time for a top-up . I decide to do it via USB via my computer and that's when things started to go south. I came back to check my phone and...nothing. I done a hard restart and at first everything seemed fine only to get a continuous boot-loop. I tried to enter TWRP and it hangs on the "teamwin" logo. Then I decided to flash stock via Odin and I still get the same boot-loop. I can still access downloader but that's it.
For reference the version of TWRP I was running was 2.8.6.1 (flashed back to 2.8 Nova version) and the ROM I was running was the latest version of Ressurection Remix by Maclaw.
So, I'm open to any suggestions. Any help would be much appreciated and paid forward.
Thanks for hearing me out.
So going by the lack of feedback I'm basically screwed?
Oh for ****s sake come on! I've had this up for 3 days on this site full of so called enthusiasts and "professionals" and not one response? I'm sorely disappointed.
So there is honestly no one that can help me with this?
Pathetic...
Come on there must be someone that can help me with this, otherwise I'll have to risk buying a broken one for parts.
Haven't done any custom stuff in a while but the boot loop sounds familiar, have you wiped the dalvik cache in the advanced menu also have you tried a factory reset?
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
Use the Volume keys in order to navigate through the recovery menu.
Select “advanced” and choose “wipe dalvik cache”.
Return to main menu.
Then select “wipe data factory reset”.
Return and this time choose “wipe cache partition”.
Return and select “reboot system now”.
Your handset should start in Android OS now.
Grumpy Cat said:
It seems that I may have flashed one to many times or something else is playing up. Anywho, I came to check my phone this morning and everything was working fine. Checked the battery status and I thought it was time for a top-up . I decide to do it via USB via my computer and that's when things started to go south. I came back to check my phone and...nothing. I done a hard restart and at first everything seemed fine only to get a continuous boot-loop. I tried to enter TWRP and it hangs on the "teamwin" logo. Then I decided to flash stock via Odin and I still get the same boot-loop. I can still access downloader but that's it.
For reference the version of TWRP I was running was 2.8.6.1 (flashed back to 2.8 Nova version) and the ROM I was running was the latest version of Ressurection Remix by Maclaw.
So, I'm open to any suggestions. Any help would be much appreciated and paid forward.
Thanks for hearing me out.
Click to expand...
Click to collapse
TheMadTurnip said:
Haven't done any custom stuff in a while but the boot loop sounds familiar, have you wiped the dalvik cache in the advanced menu also have you tried a factory reset?
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
Use the Volume keys in order to navigate through the recovery menu.
Select “advanced” and choose “wipe dalvik cache”.
Return to main menu.
Then select “wipe data factory reset”.
Return and this time choose “wipe cache partition”.
Return and select “reboot system now”.
Your handset should start in Android OS now.
Click to expand...
Click to collapse
Thanks for the feedback but as I have already stated I can't access any recovery only Odin, and desktop Odin won't allow me to re-partition only write. Still, whether it be stock or a custom ROM it is the same result: bootloop and recovery freezes on splash screen.
So any other takers? Yes? No?
Why even have a "help & troubleshooting" section if, well, I don't know, no one helps!!!
Dude you're puerile attitude is baffling, I understand you desperately want help, but do you really think you'll get it if you keep throwing toys out of your pram?
The problem you've described suggests that you're phone is 'fixable' however, it may take a few different methods to restore it. Ok, so you cannot access recovery mode, therefore you're unable to clear your phone like TheMadTurnip suggested, and you're also unable to access any backup you might have made. The downloader works so I can only recommend you try to investigate what's going wrong when you flash via Odin, does the flash show as pass or fail? Have you tried flashing using a different cable or computer, heck have you even tried using another version of Odin? Is Kies installed on your computer, if so then remove it. Have you flashed using a PIT file as well as the stock firmware? Elaborate on your situation so tailored advice can be given to you.
Kind Regards,
Pinda
Pinda007 said:
Dude you're puerile attitude is baffling, I understand you desperately want help, but do you really think you'll get it if you keep throwing toys out of your pram?
Click to expand...
Click to collapse
In light of how active this section still is I think a week is more than enough time to expect a response, I was even quite polite in my OP. Even a simple "no I can't help but maybe try this" would have sufficed. But I'll take it under advisement...
Pinda007 said:
does the flash show as pass or fail?
Click to expand...
Click to collapse
It shows a pass, won't allow me to re-partition though.
Pinda007 said:
Have you tried flashing using a different cable or computer, heck have you even tried using another version of Odin?
Click to expand...
Click to collapse
I have tried flashing using the original cable the phone came with; so I have tried 2. I even tried other USB ports. And yes I have tried another version of Odin.
Flashing doesn't seem to be a problem at the moment, just everything else.
Pinda007 said:
Is Kies installed on your computer, if so then remove it.
Click to expand...
Click to collapse
It is installed along with the Samsung USB driver. Having it installed hasn't caused a problem. I'll uninstall it if you think that will help.
Pinda007 said:
Have you flashed using a PIT file as well as the stock firmware? Elaborate on your situation so tailored advice can be given to you.
Click to expand...
Click to collapse
A pit file? And yes, as I have already mentioned I have installed the stock firmware.
Grumpy Cat said:
In light of how active this section still is I think a week is more than enough time to expect a response, I was even quite polite in my OP. Even a simple "no I can't help but maybe try this" would have sufficed. But I'll take it under advisement...
It shows a pass, won't allow me to re-partition though.
I have tried flashing using the original cable the phone came with; so I have tried 2. I even tried other USB ports. And yes I have tried another version of Odin.
Flashing doesn't seem to be a problem at the moment, just everything else.
It is installed along with the Samsung USB driver. Having it installed hasn't caused a problem. I'll uninstall it if you think that will help.
A pit file? And yes, as I have already mentioned I have installed the stock firmware.
Click to expand...
Click to collapse
As it stands it's about ruling things out to pinpoint what's going wrong, I'm no expert, merely a trial and error kind of guy. Anyway, yes, I would suggest uninstalling Kies and try the flash again, although if Odin is flashing successfully then this might not be the issue, but it's worth a shot. When I resolved my bootloop, using a PIT file was one of the things I did, so perhaps that's something you might want to look into. Also, make sure your firmware downloads are clean, basically make sure they download smoothly and aren't disturbed by a network disconnection etc. Could you post links to where you downloaded your stock firmware?
Pinda007 said:
As it stands it's about ruling things out to pinpoint what's going wrong, I'm no expert, merely a trial and error kind of guy. Anyway, yes, I would suggest uninstalling Kies and try the flash again, although if Odin is flashing successfully then this might not be the issue, but it's worth a shot. When I resolved my bootloop using a PIT file was one of the things I did, so perhaps that's something you might want to look into. Also, make sure your firmware downloads are clean, basically make sure they download smoothly and aren't disturbed by a network disconnection etc. Could you post links to where you downloaded your stock firmware?
Click to expand...
Click to collapse
I got my firmware from sammobile.com, right down to my network provider. I've flashed it before and never had any problems. I'm just trying to figure out why my phone self-bricked. I was on latest "Resurrection Remix" when it happened.
Where can I find this "PIT" file and how do I use it? I notice an option in Odin so I can probably figure that part out. At the moment my knowledge is limited to rooting, flashing custom recoveries and ROMs. Sorry.
Grumpy Cat said:
I got my firmware from sammobile.com, right down to my network provider. I've flashed it before and never had any problems. I'm just trying to figure out why my phone self-bricked. I was on latest "Resurrection Remix" when it happened.
Where can I find this "PIT" file and how do I use it? I notice an option in Odin so I can probably figure that part out. At the moment my knowledge is limited to rooting, flashing custom recoveries and ROMs. Sorry.
Click to expand...
Click to collapse
Ahh ok, yes my knowledge is also limited in that respect. I guess it's all about learning and helping each other out, which is where I guess it can be frustrating when there's a lack of 'available' support in these forums. Nevertheless, I must stop droning on, I used a PIT file for my S variant after noticing numerous users mentioning the significance of it when using Odin to flash. Here's an interesting thread to find out more (http://forum.xda-developers.com/showthread.php?t=999097). It's a sort of map if you like, which inadvertently tells the software where everything has to go on the handset, that's my noob interpretation of it anyway. I found the relevant PIT file for my variant on a XDA thread, so it might be worth scurrying through archived threads to see if you can find one for your phone, make sure there's legit feedback for it though. You just flash it with the firmware like you normally would.
Remember, I'm no expert, I'm just going by how I fixed my phone over the weekend. I apologise my attempts to help are meager, I'm still relatively new to all this, just like you.
Pinda007 said:
Ahh ok, yes my knowledge is also limited in that respect. I guess it's all about learning and helping each other out, which is where I guess it can be frustrating when there's a lack of 'available' support in these forums. Nevertheless, I must stop droning on, I used a PIT file for my S variant after noticing numerous users mentioning the significance of it when using Odin to flash. Here's an interesting thread to find out more (http://forum.xda-developers.com/showthread.php?t=999097). It's a sort of map if you like, which inadvertently tells the software where everything has to go on the handset, that's my noob interpretation of it anyway. I found the relevant PIT file for my variant on a XDA thread, so it might be worth scurrying through archived threads to see if you can find one for your phone, make sure there's legit feedback for it though. You just flash it with the firmware like you normally would.
Remember, I'm no expert, I'm just going by how I fixed my phone over the weekend. I apologise my attempts to help are meager, I'm still relatively new to all this, just like you.
Click to expand...
Click to collapse
I tried installing stock firmware with the PIT file I found here and still get the same result. I might be screwed.
Grumpy Cat said:
I tried installing stock firmware with the PIT file I found here and still get the same result. I might be screwed.
Click to expand...
Click to collapse
I think that's the exact file that worked for me
I don't know what else to suggest at the moment, the fact that you cannot get into recovery makes it that much harder.
I'll come back to you if something comes to mind.
EDIT- Have you tried re flashing a custom recovery to overwrite your current one? If you can somehow get into recovery you could trying clearing your phone of cache and installing a ROM zip-folder. Also, have you got another battery you can try in your handset? I cannot help you with the Odin method no because you've pretty much exhausted all the possible solutions that I know of, perhaps screenshot the Odin log and post it on here for more info.
My s3 mini also got same problem.any solution found

Soft Bricked S6 Active Help !!!!!!!!!

Hello, I bought a Galaxy S6 Active used off of ebay that was already soft bricked. I could only get the phone into Download Mode and there was no Recovery of any sort.The phone was also of course stuck in a bootloop and would not display the normal charging icon when connected to a charger. I have flashed almost every type of firmware I can find and nothing has worked. I have no clue what version of android the phone is running but I would guess it is 6.0.1. I am a semi noob with the root process and XDA, so I have searched the forums for a custom Recovery because I figure this where I should start, seeing as I don't know how this phone was bricked or any specifics of the rooting methods that were applied. I successfully applied all the firmware for 5.11 and the phone still wont boot. I also tried Smart Switch and two different versions of Kies. I also have tried several autoroot methods that all failed. Also now when I plug the phone either into the computer or the charger it just goes directly to the bootloop and doesn't show a charging screen of any sort.Someone please help me. :crying::crying::crying:
Try 5 Files firmware :/
Zack Brown said:
Try 5 Files firmware :/
Click to expand...
Click to collapse
I recently flashed all the firmware files successfully and the phone still wont boot it just resets, and it still hasnt booted at all yet nor do I have a recovery yet.
Sounds like a boot error. You need to change the boot process i suggest installing twrp and then a canoygen mod rom.
Sent from my LG-H636 using XDA-Developers mobile app
Bcoates84 said:
Sounds like a boot error. You need to change the boot process i suggest installing twrp and then a canoygen mod rom.
Click to expand...
Click to collapse
You cannot install TWRP on the S6 Active. There are no custom ROMs for the S6 Active.
Tuff luck .Sorry to hear.
Sent from my LG-H636 using XDA-Developers mobile app
Are there any custom recoveries I can install because the phone is t bricked just not complete I believe.
I would beleive there would be recoveries. Have you tried Kies yet?
Sent from my LG-H636 using XDA-Developers mobile app
I have tried kies unsucessfully several times
That is okay. My mistake i just re read your 1st post. Do you know the model of the phone? It will help flash the proper firmware. While you are looking for that install the drivers needed for the phone on your p.c .
Sent from my LG-H636 using XDA-Developers mobile app
Bcoates84 said:
That is okay. My mistake i just re read your 1st post. Do you know the model of the phone? It will help flash the proper firmware. While you are looking for that install the drivers needed for the phone on your p.c .
Sent from my LG-H636 using XDA-Developers mobile app
Click to expand...
Click to collapse
There is one model of S6 Active.
---------- Post added at 01:52 AM ---------- Previous post was at 01:51 AM ----------
jahdante said:
I have tried kies unsucessfully several times
Click to expand...
Click to collapse
KIES is outdated. Please follow the instructions detailed in Step 2 on THIS post.
Yes use ODIN I will assume you will be going to the correct thread see you over there cheers byess.
Sent from my LG-H636 using XDA-Developers mobile app
This was one of the first things I tried and it has not worked I need a recovery to flash.
There is no alternate recovery (CWM or TWRP) for this phone.And we wont get one as long as bootloader is locked. The only solution for you is to odin flash every g890a file you find, perform factory reset an then try to boot the phone. Factory reset is mandatory.
You can enter factory recovery to make factory reset. That is the hard part.When flashing is done, phone reboots it self and you cant enter recovery.You have to pres power button long enough to force restart (it wil restart,not power off),then as soon as screen goes black,you pres recovery combo (pwr+home+vol up) and hope you get to recovery.You have to be very quick.It may take a few trys to success.
If after factory reset the phone still wont boot, move to the next file to flash using odin.
Be careful not to flash any file that is not for this phone, because the file may flash, but after that your phone may be permanently bricked.
There is a high chance that you may never fix your phone.
Hope you get back to us with good news.
jalenleegamer said:
umm, you say you tried flashing firmware? make sure its for the right model (ex: SM-G920) and (im not sure how vital this is) for the right phone carrier (ex: metro or sprint). or it wont work.
If you want a custome recovery you can flash TWRP, but the same rules above apply.
and pray its not a hardware error otherwise no ammount of flashing will save you, and you'll have to get a refund or accept you just got scammed.
Click to expand...
Click to collapse
- There's only one model of S6 Active
- There's only one carrier of S6 Active
- As stated before, there are no custom recoveries for S6 Active
- He purchased a broken device knowing it was a broken device. the seller is not liable in any way
Please read other threads and have some knowledge on the device at hand before submitting an answer. The amount of false information in this section of the forums is astounding.
To @jahdante, do not attempt to flash "every ODIN firmware you find". Your only, and most likely option is, as you have most certainly attempted, to use ODIN as detailed in this post. There has just been an updated ODIN binary (v12). Attempt to flash this VIA ODIN using the instructions detailed in the post linked previously. Please be sure you are using the latest version of ODIN (v3.12.3). If you do not have, or do not know if you have the latest version, you can find the download link to the latest version here, here, or in the first link.
If this fails, your best bet is to take the device to a Samsung Experience Center at the nearest Best Buy.
just use smart switch and its easy to recover your phone.
@mart3 I dont think anyone ever installed smart switch on this device because when I input the serial number smart switch always just closes. I would need the serial number of a phone that smart switch installed in order for this process to work. Also @FevenKitsune the newer Odin version did not help thank you for the suggestion though. I could use the serial number of a S6 Active with smartswitch installed strictly for the purposes of restoring the phone and nothing else if anyone could help please.

Categories

Resources