ATTACKED-KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING THIS KERNEL WORKS IN STOCK LOLLIPOP 5.0.2 ONLY
Hi all, im not a DEV, so please go easy on me, im still learning...
This kernel works in STOCK LOLLIPOP 5.0.2 Roms... DOESNT WORK CM / AOSP BASED ROMs !!
The main goal is to have a stable and optimized Kernel, with usefull features ...
The features Are :
Compiled Using Linaro 4.9.3 Cortex A7 Optimized
Reclaimed RAM from loggers
Added Power Suspend 1.5
CPU Underclocking
Enabled Power Eficcient Worqueues
Added SmartMax Governor
Added Yankactive Governor
Added Alucard Governor
Added Intellimm Governor
Added Impulse Governor
Added Zzmoove Governor
Added TripNdroid I/O Schreduler
Added SIO I/O Schreduler
Added ZEN I/O Schreduler
Added fiops I/O Schreduler
Some Kernel Optimizations
GPU Overclock (533Mhz) (thanks to pinkflozd)
GPU Underclock (100Mhz) (thanks to pinkflozd)
Added Conservative GPU Governor
Permissive SElinux
Added LCD_KCAL
Added -02 optimization flags
Enabled Kernel NEON Mode
Init.d Support
Added Optimized ARM RWSEM algorithm
Added USB Fast Charge V2
Added KEXEC HARDBOOT PATCH
Added MSM HotPlug
Added Bricked HotPlug
Added Intelli HotPlug
Added Alucard Hotplug
Enabled On/Off Support for ARCH_POWER & GENTLE FAIR SLEEPERS
Added PegasusQ Governor
Added Fauxs Sound
Added High Performance Headphone Mode
Added Fsync On/Off Support
Updated CPU Boost Driver
Lots Of Tweaks and Optimizations
Update linux kernel 3.4.42 >> 3.4.107
Added DT2W & S2W VERSION
This kernel has now inbuilt SYNAPSE suport :highfive: , Big thanks and credits to @apb_axel for UKM
To tweak you will have to download Synapse from PlayStore created by Andrei Lux it includes all kernel features...
DOWNLOAD
ATTACKED-KERNEL V8
ATTACKED-KERNEL V8 (DT2W & S2W VERSION)
OLD DOWNLOADS
STOCK KERNEL FOLDER
XDA:DevDB Information
ATTACKED KERNEL - STOCK, Kernel for the Moto G
Contributors
attack11, attack11, faux123, savoca, varun chitre , pinkflozd ,franciscofranco ,shivamk11, ion-storm, alin23, anarkia1976, neobuddy89 ,blechd0se ,myfluxy, F4k, hurtsky
Source Code: https://github.com/attack11/kernel-msm-lollipop
Kernel Special Features: Simple & Stable Kernel
Version Information
Status: Stable
Current Stable Version: V8
Stable Release Date: 2015-05-26
Created 2015-04-06
Last Updated 2015-06-08
Reserved
Changelog:
06-04-15
First Release
07-04-15
Second Release
Added Init.d Support
Added Optimized ARM RWSEM algorithm
Fixed Governors
Other changes check Git
09-04-15
Third Release
Added Alucard Governor
Added Fast Charge V2
Added KEXEC HARDBOOT PATCH (test please)
Fixed version not showing in settings
Tweaked SmartMax more battery friendly
Fixed weird frequencies
Disabled 96MHz overclock frequency (seems to work better at minimum 192 MHz)
Updated MSM HotPlug, It works a lot better now
Enabled ARCH_POWER and disabled GENTLE FAIR SLEEPERS
14-04-15
Fourth Release
Added Inbuilt SYNAPSE support (read OP)
Enabled On/Off Support for ARCH_POWER & GENTLE FAIR SLEEPERS
Added PegasusQ Governor
Added Fauxs Sound
Added Fsync On/Off Support
Lots Of Tweaks and Optimizations
Disabled CPU boost & SmartMax Governor for now (was causing issues)
22-04
Fiveth Release
Improved Synapse a little more for our device
Fixed some bugs
Added back SmartMax Governor
Added Alucard Governor
Added Intellimm Governor
Added Impulse Governor
Added Zzmoove Governor
Added back CPU Boost On/Off Support
02-05
Sixth Release
Update linux kernel 3.4.42 >> 3.4.107
Added DT2W
Added S2W
Added Alucard Hotplug
Disabled MPdecision & Touch Boost
Updated Installer script to install busybox & others...
04-05
Seventh Release
Reverted DT2W
Reverted S2W
Reverted Disabled MPdecision & Touch Boost
Updated Installer script & others...
26-05
Built From the scratch
Updates from Motorola & CM sources
New Updated Installer Script
Updated msm_hotplug
Added intelli_hotplug
Added Bricked_hotplug
Updated Cpu Boost Driver
Updated Interactive & Ondemand CPU Governor
Updated simple_ondemand GPU Governor
Added High Performance Headphone Mode
Update UKM with more stuff
Update S2W & DT2W VERSION
Some other stuff... Check git !
The Governors are working fine now !
Love u
Really waiting for it
Beauty!! I'm waiting long time for stock kernel
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Awesome! I have been waiting for so long, does it have fauxsound support?
Cjit26 said:
Awesome! I have been waiting for so long, does it have fauxsound support?
Click to expand...
Click to collapse
No, read op, not in that list
init.d support? WIP or already included?
iDynamics said:
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Click to expand...
Click to collapse
Is your /data partition ext4 or f2fs?
iDynamics said:
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Click to expand...
Click to collapse
Great! so it works on GPE 5.1 too, Thanks!
Cjit26 said:
Awesome! I have been waiting for so long, does it have fauxsound support?
Click to expand...
Click to collapse
No, im not planning to add that feature yet, maybe its better to wait faux new kernel
celikbasm said:
init.d support? WIP or already included?
Click to expand...
Click to collapse
I am working on it, hopefully today i release a new version with fixed governors and init.d support
Oh okay, it works great so far man,good job :good:
attack11 said:
ATTACKED-KERNEL
Click to expand...
Click to collapse
This guy is making lot of good contribution to the Moto G XDA community in the recent past.
I think we can repay him with a little gesture of appreciation.
I thought of making him a new sig.. Hope you like it attack11.. If no, let me know what changes you need.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for your kernels.
Cheers!!
The /data partition is ext4.
hmnk said:
This guy is making lot of good contribution to the Moto G XDA community in the recent past.
I think we can repay him with a little gesture of appreciation.
I thought of making him a new sig.. Hope you like it attack11.. If no, let me know what changes you need.
Thanks for your kernels.
Cheers!!
Click to expand...
Click to collapse
Wow, Thanks a lot! Its Perfect!
V2 its Out !
Changes:
Added Init.d Support
Added Optimized ARM RWSEM algorithm
Fixed Governors
Other changes check Git
There are some weird issues with some frequencies, please test, Cheers!
I cant able to download this kernel from AFH . I have no idea why this happens
I'll flash this on stock 5.0.2 later today and report in case i run into any issues. I wish that this version for stock roms becomes as good as the version for aosp / cm
Well for me on 5.1 GPE the camera gets broken and now when getting back to stock kernel the Wi-fi won't turn on.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
GitLab
FenomenalMOD, is now adapted for stock rom, now you can get the maximum performance and baettry life... without bugs!!.
FEATURES
*Compiled with Linaro 4.9 Cortex A7
-Ofast flags
Mako Hotplug
LZ4 Compress for faster boot
Underclock (122-96 Mhz)
Many patches for the best battery life
Dinamic read-ahead
Minimal screen off cpufreq set to 96Mhz and maximun 122Mhz
Aimed add performance with proper battery life
Earliest Deadline First scheduling algorithm
Deadline scheduler with EDF algorithm
FULLY HIBRYD KERNEL
ALUCARD AND IMPULE GOVERNOR
Dynamic management of dirty page writebacks, expire and cache pressure.
Fully patched from CAF Sources
Fully renoved kgsl (patched from Codeauror and CAF Sources)
Many patches from Linux kernel 4.0!!!!
Mako hotplug reworked( better cpu control)
msm-adreno-tz GPU governor updates from CAF (more power for GPU and efficient control)
Fully optimized
Disabled stock touch boost and replaced with enhanced CPU Boost Driver
Wakeup boost, Input Boost and Hotplug Boost for CPU Boost Driver
Latest CAF Interactive governor with tuned defaults
Impulse governor - Tweaked CAF interactive governor - Friendly and power efficient frequency scaling.
Fixed entropy depletion
SELinux improvements
Neon-enabled ARM crypto routines
Sound Control
and more!!!!!
FenomenalMOD WEB SITE
INSTALLATION:
FLASH IN YOUR CUSTOM RECOVERY
If you like my work, I would appreciate a donation.[/CENTER]
Nicely Done!
I went back to stock ROM just to try this kernel, after 12 hours I can say that this is awesome, zero lags even on heavy games, overall performance is great and battery life is also great, great work dev!
Any issues?
KagamiNator said:
I went back to stock ROM just to try this kernel, after 12 hours I can say that this is awesome, zero lags even on heavy games, overall performance is great and battery life is also great, great work dev!
Click to expand...
Click to collapse
Is this working on stock 4.4.4 also
Sent from my Moto E using XDA Free mobile app
moinakbera said:
Is this working on stock 4.4.4 also
Sent from my Moto E using XDA Free mobile app
Click to expand...
Click to collapse
Is that a question? If it is, the answer is no, this kernel is ONLY for 5.0.2 stock ROM, search on the forum there is some others kernels for 4.4.4
FINALLY! Thx so much @xperiafan13
New version
NEW VERSION UPLOAD!!
YOU CAN DOWNLOAD FROM MY WEB SITE!!!
CHANGES (nowweekly updates)
FULLY HIBRYD KERNEL
ALUCARD AND IMPULE GOVERNOR
Dynamic management of dirty page writebacks, expire and cache pressure.
Fully patched from CAF Sources
Fully renoved kgsl (patched from Codeauror and CAF Sources)
Many patches from Linux kernel 4.0!!!!
Mako hotplug reworked( better cpu control)
msm-adreno-tz GPU governor updates from CAF (more power for GPU and efficient control)
Fully optimized
Disabled stock touch boost and replaced with enhanced CPU Boost Driver
Wakeup boost, Input Boost and Hotplug Boost for CPU Boost Driver
Latest CAF Interactive governor with tuned defaults
Impulse governor - Tweaked CAF interactive governor - Friendly and power efficient frequency scaling.
Fixed entropy depletion
SELinux improvements
Neon-enabled ARM crypto routines
SOUND CONTROL!!!!!
and more!!!!!
xperiafan13 said:
NEW VERSION UPLOAD!!
YOU CAN DOWNLOAD FROM MY WEB SITE!!!
CHANGES (nowweekly updates)
FULLY HIBRYD KERNEL
ALUCARD AND IMPULE GOVERNOR
Dynamic management of dirty page writebacks, expire and cache pressure.
Fully patched from CAF Sources
Fully renoved kgsl (patched from Codeauror and CAF Sources)
Many patches from Linux kernel 4.0!!!!
Mako hotplug reworked( better cpu control)
msm-adreno-tz GPU governor updates from CAF (more power for GPU and efficient control)
Fully optimized
Disabled stock touch boost and replaced with enhanced CPU Boost Driver
Wakeup boost, Input Boost and Hotplug Boost for CPU Boost Driver
Latest CAF Interactive governor with tuned defaults
Impulse governor - Tweaked CAF interactive governor - Friendly and power efficient frequency scaling.
Fixed entropy depletion
SELinux improvements
Neon-enabled ARM crypto routines
SOUND CONTROL!!!!!
and more!!!!!
Click to expand...
Click to collapse
Nicely done!
Really good kernel :good:
But one question, can you set selinux to permissive?
which I have to download? what folder?
Thank you
Great work, thank you for this kernel. Just wondering if the dev still supports that kernel?
Any update? Please
SORRY
carlos arriaga said:
any update? Please
Click to expand...
Click to collapse
im working in new kernel fully based in caf/codeaurora..... Its for cm12.1/aosp
Does this kernel supports dt2w?
abacate123 said:
Does this kernel supports dt2w?
Click to expand...
Click to collapse
No
Simomaster1 said:
No
Click to expand...
Click to collapse
Ok
---------- Post added at 09:05 AM ---------- Previous post was at 08:35 AM ----------
Is there any kernel available for the Moto E which include stock rom support (lollipop) and dt2w?
abacate123 said:
Ok
---------- Post added at 09:05 AM ---------- Previous post was at 08:35 AM ----------
Is there any kernel available for the Moto E which include stock rom support (lollipop) and dt2w?
Click to expand...
Click to collapse
No.
xperiafan13 said:
im working in new kernel fully based in caf/codeaurora..... Its for cm12.1/aosp
Click to expand...
Click to collapse
Where can i find the last kernel version for the Stock ROMs? on your website there's only the CAF 02...
Can I use this kernel on 5.1 stock rom?
[26/08][KERNEL][3.10.87][NEW THERMAL CONFIG]RAZORREBORN� V2.0r2[UBER][UNIVERSAL][KCAL
ENJOY RAZOR SHARP OPTIMIZATIONS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.[/LEFT]
*/
FANPAGE (FACEBOOK ) : https://www.facebook.com/razorreborn
Features :
Built on new cyanogensources.. yep with bugs fixed.. latest sources.. better stability
LEDFIX inbuit.. thanks to black.Dragon74
Better battery management.. Respect HMP.. Better Conservative . tweaked little
Use all cores for booting
TCP added,Custom IOSCHEDULERS ADDED
ALUCARD Gov Added..
Custom governors include ALUCARD, ELEMENTALX, DARKNESS, IMPULSE, YANKACTIVE
Custom Hotplugs Include ALUCARD,BRICKED and THUNDERPLUG,INTELLIPLUG
Dynamic Fsync.. thanks to Varun Chitre
KCAL drivers added..
Powersuspend..
disabled KSM
VIbrator Intensity Control
Charging Current Control upto 1.5A.. users can select..(Thanks to Varun Chitre)
disabled crc Check upto 30% performance improvement
misc tweaks,Stability tweaks
Little tweaks with sampling rates and scaling..
-ofast optimisation
Thermal Throttle temp control from userspace .. Thanks @franciscofranco
Bumped Kernel version to 3.10.54
default VFC pressure Decreased..
More Zram Devices
Compiled Using Latest Toolchain.. UBERTC6.0 based on gcc6.0
Fix high load average from uninterruptible waits
-ofast optimizations
Booting on BLISSPOP..
CHANGELOG
* Update v2.0r2
Updated new Thermal Config... Thanks to @vishalraj08
* Update v2.0
Updated to 3.10.87 ( THANKS TO neobuddy89)
FiX Notification Leds
Default settings.. not necessary to tune
bring back color enhancement..
Many Fixes...
* Update v1.8
Add Governors:-
Adaptive
dancedance
despair
hellsactive
intelliactive
lionheart
nightmare
wheatly
zzmoove
barryAllen
SmartMax
BioShock
Pegasusq
Live Display Driver
Add Driver for FiiO USB DAC
Supports MIUI
* Update v1.6
Undervolt Cpu
Synced with latest CM source
Updated Prima Drivers
Added Adreno Idler
Added Quickwake drivers
Change SElinux to Permissive
android: drivers: workaround debugfs race in binder
Disable some debugs.. and Enabled Diag..
* Update v1.4
Fix frequency Scaling issue
Synced with latest tree.. commits till today.
Change Compiler and use many optimizations
Added Hyper and Blu Active governor
ipv6: Don't reduce hop limit for an interface
sync: don't block the flusher thread waiting on IO
SelinUX fIX... Change to Enforcing...
Working on Bliss, Exodus and almost all roms...
* Update v1.3
Merged with latest source...
solved booting problem with many roms..
-ofast optimizations for better zram and performance
Faster and bettery battery backup.. and tweaks..
* Update v1.2
Fix frequency Scaling issue in some governors
Added latest commits from Cyanogenmod
No issue with keyboard.. high sensitivity..
Added more Hotplugs - AutoSMP , Zen Decision , MAKO
Tweaked Yankactive
Disabled all hotplugs by default.. now only Thunderplug will be enabled by default
Bumped Kernel Version
Added Zen IOscheduler
*Initial Release
KERNEL PREFERED APP :- KERNEL AUDITOR
CREDITS
kairi_zeroblade
Varun Chitre
AudioGod
RaZorReborn Testers(amit,ajai,nijendra,devan,jeevan,mayflower,niranjan,parag,paras,zerocool,nikil)
DOWNLOAD LINK
Build V2.0r2
DOWNLOAD LINK AUGUST 26TH V2.0r2
UBER BUILD - https://www.androidfilehost.com/?fid=24052804347801084
Build V2.0
DOWNLOAD LINK AUGUST 25TH V2.0
UBER BUILD - https://www.androidfilehost.com/?fid=24052804347800751
OLDER BUILDS
Build V1.8
DOWNLOAD LINK AUGUST 15TH V1.8
UBER BUILD - https://db.tt/rTyOrctU
SABER BUILD - https://db.tt/ch0TNoEl
Build V1.6
DOWNLOAD LINK AUGUST 10TH V1.6 - https://db.tt/h0YxwpPH
MIRROR :- https://www.mirrorcreator.com/files/CVDCX2DB/RRV1.6TOMATO-2015-08-10(08.53PM).zip_links
FORUM CROSS LINKS
[64 bit][26/07][KERNEL][LP] RazorReborn v2 [SABER][UNIVERSAL][KCAL][1.25A][-o2] - XDA
RECOMMENDED SETTINGS
Hotplug :Thunderplug
INTERVAL : 550 ms
GOVERNOR : Darkness
CPU FREQ : 200-1651 MHz
IOSCHEDULER : bfq
TCP : bic
XDA:DevDB Information
[64 bit][05/07][KERNEL][LP] RazorReborn [UBERTC6][OC1.65][KCAL][1.25A][Max SOT], Kernel for the YU Yureka
Contributors
Kiran Anto
Source Code: https://github.com/kirananto/RAZOR
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: RazorReborn v2.0r2
Stable Release Date: 2015-07-26
Beta Release Date: 2015-06-07
Created 2015-06-07
Last Updated 2015-08-28
Reserved 1
Reserved 2
Thanks for the new Kernel mate. Before flashing, I'd like to know if it works for both 5.0.2 and 5.1.1. And what ROMs have you already tried it on? Not that I won't try it otherwise, but it's better to start with caution right?
Kiran Anto said:
....TeamYureka(Mallu group)....
Click to expand...
Click to collapse
where? on xda? or, fb? or, wa?
like it. installed on bliss rom latest rom.
quick notes
- mobile reboots often while running antutu,
- screen is breathing in dark(periodic black lock screen coming), could be bliss rom as well.
- For Thermal both core control and temperature throttle is selected by default, not sure if it's a problem, but kernel auditor suggests to select only one of them.
only bug i see here is antutu reboots..
thats probably due to overclocking.. and yurekas thermal design is poor.. so it cant work on oc 1.6Ghz for more than a minute..
i do not favour the idea of overclocking.. especially yureka.. even with its 1.47Ghz.. the phone is burning hot... so what happens at 1.6 is what all of you can guess,. but with a good governor you can make use of it easily.....
I hope you know that your's is the only kernel that works right now with the new 5.1.1 roms. Thanks.
Thread Got Updated guys .,
i was thinkng why no one noticed it....
so here is a ping
Kiran Anto said:
Thread Got Updated guys ....
Click to expand...
Click to collapse
how? download link is still fetching v1.1 battery edition dt. 11/06.
Dude Check Bottom... i mean .. the changelog for new download link
Kiran Anto said:
...Check Bottom... i mean .. the changelog for new download link
Click to expand...
Click to collapse
:laugh: this?
XDAevDB Information
[64 bit][21/06][KERNEL][LP] RazorKernel v1.2 [SABERMOD][OC1.6][LED][BRICKED][MAX SOT], Kernel for the YU Yureka......
...................................
...................................
......Last Updated 2015-06-22
Click to expand...
Click to collapse
i see no clickable links.
ooh sorry .. forgot to update the thread. here it is..
thread updated. check op
THANKS
thanks for great kernel bro
Vicky049 said:
thanks for great kernel bro
Click to expand...
Click to collapse
you are always welcome...
Love it. Using since 1 day. No issues.
However with hot plug on by default and with interactive governor I don't see cpu cores going offline ever. Should it not ghi offline? But again no complaints with battery backup. Thanks.
And yes, antutu runs just fine with almost 37700 score. Thanks.
Wi-fi issue
wi-fi doesn't turn on after installing this kernel.
Using official 5.0
munna_jast said:
wi-fi doesn't turn on after installing this kernel.
Using official 5.0
Click to expand...
Click to collapse
abeyhere said:
Love it. Using since 1 day. No issues.
However with hot plug on by default and with interactive governor I don't see cpu cores going offline ever. Should it not ghi offline? But again no complaints with battery backup. Thanks.
And yes, antutu runs just fine with almost 37700 score. Thanks.
Click to expand...
Click to collapse
Vicky049 said:
thanks for great kernel bro
Click to expand...
Click to collapse
Guys Thread Updated.. check op for more info
exciting part is its working with blisspop..
compiled using latest ubertc6.0
So far so good. Well I have reverted back to stock cms 5.0 so don't know if it works in newer roms. However working solid on 5.0. Alucard hotplug is new in market. . Sticking to it for a while. Stable.
Have been using it for a day without any issues. Speed is also good. On official 12.0S. @Kiran Anto, you removed the zzzmove governor. It had lots and lots of options. Do you want to put it back?
Code:
/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
banner credits goes to : @misfitpierce
Kernel Features:kernel.org Version : 3.10.101 (latest stable version)
Built with custom(self compiled) GCC 5.2.1 linaro toolchain
Alucard Hotplug
Nethunter Support (use nethunter kernels)
USB Ethernet Support
USB Adapter Drivers
Xbox One Support
Overcolcking-Underclocking (thanks to @TheSSJ)
CPU Optimizations
Interactive Governor from fugu
Intel powerclamp driver
Async FSync from HTC
BLX implemented (thanks to @TheSSJ)
BLK-throttle improvements
ZRAM support
LZ4 Compression
exfat support
ntfs r/w support
Set minimum brightness to 2 instead of 15 percent (thanks to @TheSSJ )
sweep2sleep (on by default )
UKSM
True Dynamic Fsync [faux123]
KSM optimized
PowerSuspend [Yank555.lu]
CPU Governors:
- Intel
- Alucard
- Lagfree
- ConverativeX
- BioShock
- LionHeart
- YankActive
- Adaptive
- Wheatley
- Darkness
- Hotplug
IO schedulers:
- row
- sio
- zen
- vr
- fifo
- fiops
- tripndroid
TCP congestion algorithms :
-westwood (default, much faster speed)
-cubic
-reno
-bic
-highspeed
-htcp
-vegas
-veno
-Illinois
EXTRA Features :
added init.d support
Implemented quickwake for better response
Power efficient Work queues for better battery
Tweaked Memory management
Downloads
builds :
Download
Nethunter Kernels:
Download
FLASH THE ZIP VIA TWRP
kernel source :
https://github.com/Zenfone2-Dev/kernel-FlareM
if you want me to add any new feature leave a post
Credits:
@TheSSJ for his work on the stock kernel
@deadman96385 for his work on the CM 12.1 kernel
@crpalmer, @jrior001 for bringing up the zf2 and its kernel
@osm0sis for his work on anykernel.zip
_____________________________________________________________________________________________________________
XDA:DevDB Information
[kERNEL]FlareM[Linaro][CM-13.0]ZE551ML/ZE550ML, Kernel for the Asus ZenFone 2
Contributors
say99, [URL="http://forum.xda-developers.com/member.php?u=3520901]eoghan2t7[/URL]
Kernel Special Features: more governors, I/O shedulers, better memory managment, Async Fsync and more..
Version Information
Status: Stable
Current Version: FlareM_v16
Created 2015-12-12
Last Updated 2016-04-20
Reserved
roadmap :
add support for sweep2wake # working on that
see for possible solutions for tweaking sound
implement kernel-based thermal control
fix interactiveX and smartmax, smartmax seems to reboot the phone after third suspend and 10 secs
and more
for now :
use Interactive governor and deadline as I/O scheduler
limit max frequency to 1333Mhz for more battery and nice performance
Changelog:
v16 04/20/2016
GPU tweaks
CM updates
selinux set to enforcing by default (XOSP uses permissive )
Binder tweaks
enabled experimental configs
added tweaked simple ondemand GPU governor
mainline F2FS with encryption
compiled with GCC linaro 5.3.1
fixed all MM issues
optimized KSM
added deferred timer sysfs entry to control it.
and more underhead tweaks
improved stability.
v15 03/19/2016
kernel.org version 3.10.101
fixed selinux
smartassH3 governor
RTL8152/8150 support
Xbox one controller Support
fixed stability
Fixed reboots
QF9700 chip support
F2FS from mainline
Optimized Binder
more Atom optimization Flags
and much more
v14 02/22/2016
Build with my own linaro-gcc 5.2.1 toolchain
fixed all linux related issues
proper 3.10.96 linux
added back UKSM
Added alucard hotplug
atom optimizations
alucard min cpu online=2
v14OC build with OC
v14KVM build with KVM (No OC)
v14 without KVM and OC
More LZ4 work and compression and decompression
more power efficient work queues
added PowerSuspend
Tweaked L1 and L2 cache
fixed cpuset for hotplugging
Link Time Optimizations
Zen-tune for snappiness
Added Intel Cpu governor
Support for displaylink drivers (as module)
and more under-head tweaks
v13 02/04/2016
updated to latest kernel.org version : 3.10.96
v13k with KVM support
faster kernel decompression
added hotplug governor for real time hotplugging
Build with GCC 5.3.0
lockless wakeups for sched and futex
Hot plugging for the ram
Forced hot plugging on cpu0 no matter the governor
CPU workload consolidation
more underhead tweaks
better stability
v12 01/24/2016
updated to latest kernel.org version : 3.10.95
Introduced Intel power-clamp driver
Fixed MTP related issues
Cleaned a lot things
More USB ETHER drivers
Frankenstein Governor (based on interactive with hot plugging) # use with caution
Improved more on Stability
and more tweaks
v11 01/14/2016
improved stability
improved memory management(KSM)
Optimized KSM
Introduced power suspend
added darkness governor
updated to latest CM sources
USB HID keyboard/Mouse support
Kali Nethunter Support (working on bringing it up)
updated with latest ASUS source codes (MR912-v2.20.40)
Under hook tweaks
Reduced Latency
Decreased time to enter sleep
True Dynamic Fsync
Cleaned lot things
Applied grays patch to improve a bit of speed
fixed up upgrading
updated codecs and many other drivers
v10 01/06/2016
updated kernel.org version (3.10.94)
improved stability
improved battery backup (as per I have noticed)
UKSM
nothing more
more underhead tweaks
v9 01/01/2016
fixed ROW IO scheduler
fixed TripNDroid IO scheduler
fixed permission for workqueue
used O3 optimizations
improved wakelock.c (wakes up faster now)
ZRAM tweaks
many more underhead tweaks
v8 12/28/15
implemented sweep2sleep
unlocked gpu
fixed simpleondemand GPU governor for better scaling
tweaked readahead (a bit faster now)
fixed ext4 use Frandom
init.d is automatically created if it's not there
more tweaks . . . .
v7b 12/25/15 (Santa's gift )
decreased minimum brightness
a bit busy today cant do any more
v7 12/24/15
added tripndroid I/O scheduler
implemented blx
readahead tweaks
exfat support (module)
ntfs read write support (module)
v6b 12/21/15
fixed multi-core issue
used anykernel zip to make flashable zips (thanks to @eoghan2t7)
fixed issue of kernel not booting on recent cm builds (I am on todays build)
common zips for Z00A and Z008 from now
v6 12/20/15
added quickwake back
implemented google's snappy compression
implemented frandom to generate random no. much faster
enabled zram
synced with latest cm codes
tweaked interactive a bit
v5 12/18/15
added alucard governor and fixed it # phone seems better on alucard governor
added deadline as default for external card
updated to latest base code by CM (thanks to @jrior001 and @crpalmer)
v4b 12/14/15
enabled exfat support (had forgot to enable it in previous build)
added stock gpu drivers
no gpu unlocking for now
v4 12/13/15
added exfat support
added TCP congestion algorithms
westwood set as default
BLK-throttle improvements
renamed z008 version correctly
v3 12/12/15
added init.d support
implemented Async Fsync
improved work queue for better battery life
unlocked GPU for better scaling (thanks to @TheSSJ)
Improved memory management
v2 12/12/15
added UC(thanks to @TheSSJ)
v1 12/12/15
added several I/O shedulers and Governors
screenshots :
A good start buddy!
With some optimizations, it would be a great kernel. :good:
krasCGQ said:
A good start buddy!
With some optimizations, it would be a great kernel. :good:
Click to expand...
Click to collapse
thanks bro
next version will hopefully have UC
Good luck with this kernel, I'm very happy to see some guys like you support the ZF2 ! @say99 :good:
UC implemented flareM V2
Any chance for CM 12 version ?
Sent from my ASUS_Z00A using Tapatalk
tuilalnvinh said:
Any chance for CM 12 version ?
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
well yes but only for Z00A aka ZE551ML
but will need a tester cause I will testing cm 13 kernels for now
nothing for Z00D??
cieffe54 said:
nothing for Z00D??
Click to expand...
Click to collapse
will need a tester
pm if someone wants to be
say99 said:
well yes but only for Z00A aka ZE551ML
but will need a tester cause I will testing cm 13 kernels for now
Click to expand...
Click to collapse
Ok, i can be a tester, i'm using ze551ml 2GB Ram
Sent from my ASUS_Z00A using Tapatalk
tuilalnvinh said:
Ok, i can be a tester, i'm using ze551ml 2GB Ram
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
will pm you the link as soon as I finish adding features and compilation
Wil it work on Z008 build running cm13??
kjinx01 said:
Wil it work on Z008 build running cm13??
Click to expand...
Click to collapse
uploaded a test build #v2_z00D
k I will flash z00D build in my z008 and will report u.. And in case if it don't work wt do I need to do??
kjinx01 said:
k I will flash z00D build in my z008 and will report u.. And in case if it don't work wt do I need to do??
Click to expand...
Click to collapse
bro in the drive you will see a file named as flareMv2z00D.zip
flash that one its for z00D
Kk... I was asking for z008 build?? U compiled kernel for z008 running on cm13 pp
kjinx01 said:
Kk... I was asking for z008 build?? U compiled kernel for z008 running on cm13 pp
Click to expand...
Click to collapse
yes bro
test kernel z00A cm 12 up
testers can flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void. Nah! Just kidding No warranty is void in YU. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Reloaded Kernel was build keeping in mind the the stability and performance of your device.
A lots of battery Saving tweaks also applied to keep the battery consumption minimal.
Experience your zeus like never before.
Features
CPU Governors
ElementalX
Conservative
Darkness
Impulse
Intelliactive
Interactive
Ondemand
Performance
Powersave
Smartmax_eps
CPU Hotplug
ThunderPlug
Alucard
IO Schedulers
BFQ
FIOPS
NOOP
ROW
DEADLINE
CFQ
SIO
SIOPLUS
ZEN
Common
Kernel Upstream to 3.10.104
OverClocked Big Cluster upto 1.71GHz
OverClocked Little Cluster upto 1.21GHz
CPU Optimization
GPU Optimization
Kexec and F2FS Support
Added support for zRAM and zsmAlloc with LZ4 Compression
Reloaded Thermal System (Based on IntelliThermal v3.1)
KCal(Screen/Vibrance-Control) v2
PowerSuspend Drivers v1.7
Tweaks for better Performance and Battery life
Optimization on Interactive Governor
Support for Fast Charging (ThunderCharge 2.1)
Support for Adreno Idler
Support for Dynamic Sync
Support for Power Efficient Work Queues
WakeLock Toggles
Vibration Controller
Low-Memory Killer
Wake-Up Gestures
Interactive init.d script for better performance
Credits
CM Team
YU Televentures
Shoaib05 (for kernel upstream and many important commits)
Aayushrd7 (For Helping)
darshan1205 (For helping)
If you like my work, consider buying me a cup of coffee
XDA:DevDB Information
Reloaded Kernel, Kernel for the YU Yureka
Contributors
riteshsaxena, CM Team, Yu Televentures, Sanyam Jain, Aayush Bucha, Shoaib Anwar, Darshan Manjrekar
Source Code: https://github.com/RiteshSaxena/Reloaded_tomato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: X6
Stable Release Date: 2017-05-08
Created 2017-02-15
Last Updated 2017-05-08
Notes
Use Kernel Adiutor-MOD to apply settings! Download Link for Kernel Adiutor-MOD--https://github.com/yoinx/kernel_adiutor/raw/master/download/app/app-release.apk
Changelogs and Downloads
X6
Changelogs and Download
X5
Changelogs and Download
X4
Changelogs and Download
X3
Changelogs and Download
X2
Changelogs and Download
Old Build available here:http://forums.yuplaygod.com/threads...ed-mn-n-f2fs-kexec-random-reboot-fixed.46152/
Recommended Settings
===============PERFORMANCE===============
CPU Tab
Big Cluster
Max-1700MHz
Min-800MHz
Governor-intelliactive
Little Cluster
Max-1200MHz
Min-800MHz
Governor-intelliactive
GPU
Max-550
Min-220
Governor-msm-adreno-tz
Adreno Idler-> OFF
============BALANCED (BAISED TOWARDS PERFORMANCE)============
CPU Tab
Big Cluster
Max-1700MHz
Min-200MHz
Governor-interactive with init.d tweaks
Little Cluster
Max-1200MHz
Min-200MHz
Governor-interactive with init.d tweaks
GPU
Max-550
Min-220
Governor-msm-adreno-tz
Adreno Idler- ON
============BALANCED (BAISED TOWARDS BATTERY)============
CPU Tab
Big Cluster
Max-1500MHz
Min-200MHz
Governor-smartmax_eps
Little Cluster
Max-1000MHz
Min-200MHz
Governor-impulse
GPU
Max-465
Min-220
Governor-Simple ondemand
=============EXTREME BATTERY===============
CPU Tab
Big Cluster
Max-600MHz
Min-200MHz
Governor-Smartmax_eps
Little Cluster
Max-800MHz
Min-200MHz
Governor-smartmax_eps
GPU
Max-400
Min-220
Governor-Simple ondemand
===============COMMON===============
CPU Hotplug
As Per your Preference
Thermal
Set Temp limit to 50
Wake Locks
Turn off all. Enable them if any problem arises.
Power and Battery
Enable Charge Rate
Charge Rate -> 1250
IO Scheduler
ZEN for Internal and BFQ for External
Wake Controls
As per your Preference.
Misc
Turn off android logging
Turn on Dynamic Fsync
Update: Reloaded X2Changelogs
*Merge Latest Lineage upstream
*Merge latest CAF Code i.e., Branch 1.11
*Fixed Random Reboot on low Wi-Fi
*Completely Removed Sound Mod
*Removed GPU OC
*Better interactive init.d script added.
*Removed the Optimize for size flag, so that means improved performance.
*Proper -O3 Optimizations for GPU, much better gaming
*More Optimizations for Fluid Performance
*Battery Tweaks
*Removed many useless tweaks
Downloads
[SIZE="4"]http://ouo.io/FEwnSS[/SIZE]
Will it work with resurrection remix v5.8.0?
ndasarathy said:
Will it work with resurrection remix v5.8.0?
Click to expand...
Click to collapse
Yes.
riteshsaxena said:
Yes.
Click to expand...
Click to collapse
Download link not working, could you please provide a mediafire or androidhost link?
KuntalBiswas said:
Download link not working, could you please provide a mediafire or androidhost link?
Click to expand...
Click to collapse
Click on skip ad and you will be redirected to android file host
Work in Cm 12.1???
Update: Reloaded X3
Changelogs
*latest lineage upstream
*more balanced interactive script
*minor bug fixes
*more optimization for smoothness.
*Added TripNDroid IOSCHED
*Faux Sound Mod v3.6 (Optional)
Downloads
Without Sound Mod: http://ouo.io/H0Gpt
Sound Mod: http://ouo.io/7Dyg1
Enjoy the Fluidity
Regards,
Ritesh
will it work in lineage 0s 14.1?
Jeet Joshi said:
will it work in lineage 0s 14.1?
Click to expand...
Click to collapse
Yep
Thnx
Will try X3 on RR5.8.2
riteshsaxena said:
Changelogs
*latest lineage upstream
*more balanced interactive script
*minor bug fixes
*more optimization for smoothness.
*Added TripNDroid IOSCHED
*Faux Sound Mod v3.6 (Optional)
Downloads
Without Sound Mod: http://ouo.io/H0Gpt
Sound Mod: http://ouo.io/7Dyg1
Enjoy the Fluidity
Regards,
Ritesh
Click to expand...
Click to collapse
Thx for the X3
What is the functionality of the Sound Mod. Does it require any additional changes?
Can u guide on this
Im gonna use it on Official RR5.8.2 (for your reference)
It can be used to alter sound volumes beyond the system available values.
mohammad.nomaan said:
Thx for the X3
What is the functionality of the Sound Mod. Does it require any additional changes?
Can u guide on this
Im gonna use it on Official RR5.8.2 (for your reference)
Click to expand...
Click to collapse
It can be used to alter sound volumes beyond the system available values. You need kernel auditor to use it.
riteshsaxena said:
It can be used to alter sound volumes beyond the system available values. You need kernel auditor to use it.
Click to expand...
Click to collapse
Thnx for the information
I flashed X3 on YU+ RR5.8.2 official ROM
Settings to be edited via Kernel auditor app.
Can u share settings
Thnx
Sent from my YU5510 using Tapatalk
mohammad.nomaan said:
Thnx for the information
I flashed X3 on YU+ RR5.8.2 official ROM
Settings to be edited via Kernel auditor app.
Can u share settings
Thnx
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Its there in the second post.
riteshsaxena said:
Its there in the second post.
Click to expand...
Click to collapse
Thnx
I used the settings for Performance and Common as per 2nd post in the Kernel adiutor app.
Can't find settings for sound mod.
Do I need to do any extra settings???
Sent from my SM-N920C using Tapatalk
Update: Reloaded X4Changelogs
*Latest Lineage upstream
*F2FS Fixed and tested
*Reverted smartmax to its original values, means better battery.
*Removed intellithermal due to heating issues.
*Added temp limit in msm thermal
*Updated the interactive script
*Re-added lionfish cpu governor and VR iosched
*Lot of internal changes and minor bug fixes.
Downloads
Without Sound Mod: https://www.androidfilehost.com/?fid=817550096634751128
With Sound Mod: https://www.androidfilehost.com/?fid=817550096634751129
This is the most stable and battery efficient version of Reloaded but still the performance isn't sacrificed.
Will it work with CRdroid v2.3 & resolve random boot issue on wifi??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!DISCLAIMER!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war or your phone flies away because its fast. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
----NOTICE----
ATM this kernel is only compatible with 7.x/8.x LOS/AOSP and other based roms.Please don't expect performance of a one plus 5 and battery life of an inverter.
NOTE- the stock settings for kernel is for battery life and light gaming so in case you feel any lag,then please tune it up to your liking!
!!!!WARNING!!!!
Before posting, DO read EACH and EVERY "OP" POST made by me!! Any post which is rude, report bugs incorrectly,USELESS POSTS or ask for ETAs, WILL be REPORTED to the MODS!
All information you may be looking for can be found either in this thread or under F.A.Q or by performing a simple search. Think before you post.You have been warned!!!
Kernel features:-
Upstreamed to Linux 3.10.108
Build with Latest Linao GCC 6.4 Toolchain
Based on CAF tag LA.BR.1.3.6_rb1.23
Based on Prima tag LA.BR.1.3.6_rb1.23
Synced with latest changes by LineageOS
Goodix Support
UV CPU
CPU Voltage Control[-60 mV by default(stable)]
-O3,Justarchi's,cortex a72-a53 and other optimisations
Spectrum App Support
enabled arch power
New CPU Governers-zzmove,despair,elementalx,cafactive,bioshock,relaxed,bluactive,cultivation
Big clusters OC at 1958Mhz & small clusters at 1440 Mhz
Several new i/o-Maple,zen,sioplus,fiops,etc
Added LazyPlug Hotplug
Using Anykernel2 by osmosis
Included slimbus overclock
Wake Controls by flar2
USB FastCharge
Fingerprint Boost
AdrenoBoost
exfat and NTFS support
Added Kcal Support
Franco' QC 2.0t
Dynamic Fsync
Added powersuspend and frandom
Fully permissive kernel
Sound Control by Flar2
disabled loads of craps
Latest Busybox
Enabled Advanced Tcps(default:Westwood)
entropy updates and tuned zram values with tuned up governers
miscellaneous updates
More(i forgot)
****NOTICE****
This is a kernel,so please do not expect REGULAR builds.New builds can be rolled out the same day or once in a week or maybe once in a month.
I will not add lots of fancy stuffs.whatever you see here goes under several tests first and if it performs well,then it is added.Suggestions are always welcomed!
Do not post external links or make mirros without my permission!
Please read FAQ properly, will try to answer all questions there and don't post uselessly and get yourself in trouble.
Recommended app for tuning: EX Kernel Manager/Kernel Adiutor/Spectrum
HOW To FLASH
The lastest version TWRP IS RECOMMENDED!
Keep the kernel.zip in your ext sd/internal sd.
Boot to latest TWRP(recommended)
dirty flash your stock boot.img
Flash the Kernel.zip
Reboot!
Bugs:
Tell me.
Not working on:
idk,you tell me :v
Downloads and Changelog in Post #2
NOTE:First boot may take some time,so while its booting,don't forget to press the thanks button!(its free)
Credits:
@TheStrix for the initial bringup:good:
@AmolAmrit @warlord_rk @TheDarkStrix @AKabhishek @Wizper99 and all my teammates and telegram users who always bugged me and never tested my builds
@nicknitewolf, @ktomov @flar2 , @Santhosh M @thomas1991_12, @osm0sis, @neobuddy89 (my inspiration ), @DespairFactor and all other great developers!
(If i forgot your name,then please Drop me a PM!!)
XDA:DevDB Information
Infected Kernel, Kernel for the Xiaomi Redmi Note 3
Contributors
neonkat
Source Code: https://github.com/neonkat/kenzo_kernel.git
Kernel Special Features: flash it and you will know.
Version Information
Status: Stable
Current Stable Version: R11
Stable Release Date: 2017-11-10
Created 2017-02-18
Last Updated 2017-11-10
Downloads
----Downloads----
Unified Builds
AndroidFileHost(Click ME!)
-----------------------------------------------------------------------------
DO NOT CREATE MIRRORS!!IF LINKS ARE NOT WORKING THEN TELL ME!!!
Changelog:
R11(10-11-2017)
*rebased kernel on rb1.23,most of the old stuffs have been removed.fixing a lot of issues.
*Linux 3.10.108
*Merged battery issue patches
*updated zram and lz4 modules
*upstream updates and fixes
OLDER:
R10(14-10-2017)
*merge LA.BR.1.3.6_rb1.22
*fix video recording issue
*merge latest changes from los
*check git lulz
R9(05-09-2017)
*initial O support(still in testing)
*switch to linaro GCC 6.4.1 2017.08
*new flashlight hal compatibility
*enabled slimbus,should improve sound quality(can't say,try yourself )
*builds are now full -O3
*lots of upstream updates and fixes
R8(11-08-2017)
*Merge Caf/Prima LA.BR.1.3.6_rb1.21
*Switch to Linaro GCC 6.4 toolchain
*switch back to old fp boost drivers
*Merge Lineage kernel changes
*enable 621mhz gpu freq for both speed bins
*merge latest f2fs changes
*enable ksm
*misc. updates and fixes
R7(12-07-2017)
*Linux 3.10.107
*Merge Caf/Prima LA.BR.1.3.6_rb1.20
*Switch to stock GCC 6.4 toolchain
*Fixed zram
*CPU Voltage Control by billchen
*Merge cpu boost,lz4,etc updates
*Fingerprint boost drivers
*Upstreams updates
*Kate support
*Update all profiles
R6(18-06-2017)
*Linux 3.10.106
*Merge Caf/Prima LA.BR.1.3.6_rb1.19
*Switch back Linaro 6.3.1 2017.06-dev1
*upstream updates
*Added bugs
R523-05-2017)
*Merge CAF/Prima LA.BR.1.3.6_rb1.18
*Builds are now are fully compatible with billchen's ramdisk,settings will apply correctly now
*Switch to stock GCC 6.3 toolchain(Compiled from gcc 6 branch,no modification)
*Added Support for Spectrum! Download from Goolge Play , more info here
*Updated lazyplug and Maple i/o
*Merged latest changes by LOS
*Lots of upstream updates
*new interactive governer tunings and stock settings updated(stock settings is balanced profile)
R410-05-2017)
*Unified for both fp
*LA.BR.1.3.6rb_1.17
*add cultivation cpu governer
*sync with los trees
*enabled cpu boost to reduce micro stuttering
*franco' qc 2.0
*Dynamic Fsync
R323-03-2017)
*Add bluactive Governer
*remove fifo,tripndroid,sio,vr i/o
*fix safety net and bootloop on newer magisk
*Upstream Updates
*Fixed zen i/o crash
*adrenoboost implemented
*relaxed and interactive governer updates
R203-03-2017)
*UV cpu by 1.5 mA
*add zzmove profiles
*merge LA.BR.1.3.6_rb1.14 & Prima WLAN drivers
*minor update and fixes
R1-Goodix26-02-2017)
*Initial Release
R1-FPC18-02-2017)
*initial release
Reserved
#Gaming(performance)
big clusters-elementalx/performance
small clusters-elementalx/performance
max cpu freqs
gpu governer-performance
i/o-zen/fiops
turn off adreno idler
#Balanced
big clusters-interactive/zzmove/relaxed
small clusters-bioshock/relaxed
i/o-sioplus
#Heavy Multi-tasking
big clusters-interactive
small clusters-bioshock
i/o-bfq/sioplus
#Mother of GOD battery life(ofcourse laggy)
both cpu-powersave
big clusters-off
small clustters-1190mhz
i/o-noop/fifo
#Personal Setup
big clusters-interactive
small clusters-bioshock
i/o-sioplus
i/o readahead-1024
have a good profile?let me know so can add here!
P.s-very few stuffs but will be updated as new things will be added to kernel.
Want your our setup?follow this.
Nice!
Nice ! This kernel is for FPC or Goodix ?
Waiting the download link
Reserved
And here is pruh cat with pruh kernel
*Jihad mode working*
Great bro
Do you used over volte for over clocking,???
Sent from my Redmi Note 3 using Tapatalk
SharkEzz said:
Nice ! This kernel is for FPC or Goodix ?
Waiting the download link
Click to expand...
Click to collapse
I have FPC so building for FPC only atm,will soon get Goodix builds too as soon as i get testers.
Finally! Nice work Bud
Gonna test and comment how good it is!!
Thanks and regards!!
Nice i will try in roms nos ?
zamzam_asad said:
Nice i will try in roms nos
Click to expand...
Click to collapse
thanks!hope you like it, btw this only supports fpc.
important:if you have fpc,then flash fpc kernel by the nos developer first and then flash my kernel.
Encryption error with f2fs formatted /data , megax91 recently patched this issue on his kernel it's about 1commit , could you contact him and patch this ?
@neonkat
My impressions:
-Smooth
-Looks not to eat lot of battery... Although I have seen on EXKM, (every app closed), and leaving the phone there small clusters frequencies are going up and down and up and down (on default settings -relaxed governor forma small cluster-)
-LazyPlug is not working (I tried Scream Manager and EXKM), any core is turned on or off and configurations are not being saved (forma example maximum cores).
Thanks and regards!!
---------- Post added at 08:21 PM ---------- Previous post was at 08:20 PM ----------
neonkat said:
thanks!hope you like it, btw this only supports fpc.
important:if you have fpc,then flash fpc kernel by the nos developer first and then flash my kernel.
Click to expand...
Click to collapse
On NOS, FPC drivers are wiped (it doesn't occur with Guyver/Zetsubou/Scream Kernel).
Thanks and regards!
neonkat said:
thanks!hope you like it, btw this only supports fpc.
important:if you have fpc,then flash fpc kernel by the nos developer first and then flash my kernel.
Click to expand...
Click to collapse
Aamiin. Nope im fpc user ?? . Oh what in karnel audio must seetting again or no? Fast charging work?
Using this kernel on DU and it is ****ing smooth.. best kernel for now Thanks @neonkat for great work
aaz03 said:
Encryption error with f2fs formatted /data , megax91 recently patched this issue on his kernel it's about 1commit , could you contact him and patch this ?
Click to expand...
Click to collapse
yeah,i talked it him and he told me about that,will soon merge them and get you a build!
miguelang611 said:
My impressions:
-Smooth
-Looks not to eat lot of battery... Although I have seen on EXKM, (every app closed), and leaving the phone there small clusters frequencies are going up and down and up and down (on default settings -relaxed governor forma small cluster-)
-LazyPlug is not working (I tried Scream Manager and EXKM), any core is turned on or off and configurations are not being saved (forma example maximum cores).
Thanks and regards!!
---------- Post added at 08:21 PM ---------- Previous post was at 08:20 PM ----------
On NOS, FPC drivers are wiped (it doesn't occur with Guyver/Zetsubou/Scream Kernel).
Thanks and regards!
Click to expand...
Click to collapse
lazyplug is on by default,for some reason it is not showing up in kernel adiutor.lazyplug doesn't shut down cores quickly,it keeps cpu on for a specific interval of time and when there is no load on the cpu,it shuts it down,saving the time dealy between turning on/off any cpu.no such issue for me in exkm app,maybe update your app.
fpc drivers wiped?could you please explain it?
ik fpc drivers are shipped in different kernel(fpc fix).what i recommended is flash the fpc kernel first and then flash my kernel(because using anykernel).
zamzam_asad said:
Aamiin. Nope im fpc user . Oh what in karnel audio must seetting again or no? Fast charging work?
Click to expand...
Click to collapse
kernel audio?sorry didn't get that.
btw flar2' sound control is there and yeah,usb fast charge added too!(disabled by default)
neonkat said:
yeah,i talked it him and he told me about that,will soon merge them and get you a build!
lazyplug is on by default,for some reason it is not showing up in kernel adiutor.lazyplug doesn't shut down cores quickly,it keeps cpu on for a specific interval of time and when there is no load on the cpu,it shuts it down,saving the time dealy between turning on/off any cpu.no such issue for me in exkm app,maybe update your app.
fpc drivers wiped?could you please explain it?
ik fpc drivers are shipped in different kernel(fpc fix).what i recommended is flash the fpc kernel first and then flash my kernel(because using anykernel).
Click to expand...
Click to collapse
My fault... I reflashed NOS and I forgot to reflash fpc-fix...
And about LazyPlug, it doesn't seem to be very effective, then...
Thanks and regards!