Database Develop

[KERNEL][STOCK LP 5.0.2][SYNAPSE]ATTACKED KERNEL V8 (DISCONTINUED)

ATTACKED-KERNEL​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING THIS KERNEL WORKS IN STOCK LOLLIPOP 5.0.2 ONLY
Hi all, im not a DEV, so please go easy on me, im still learning...
This kernel works in STOCK LOLLIPOP 5.0.2 Roms... DOESNT WORK CM / AOSP BASED ROMs !!
The main goal is to have a stable and optimized Kernel, with usefull features ...
The features Are :
Compiled Using Linaro 4.9.3 Cortex A7 Optimized
Reclaimed RAM from loggers
Added Power Suspend 1.5
CPU Underclocking
Enabled Power Eficcient Worqueues
Added SmartMax Governor
Added Yankactive Governor
Added Alucard Governor
Added Intellimm Governor
Added Impulse Governor
Added Zzmoove Governor
Added TripNdroid I/O Schreduler
Added SIO I/O Schreduler
Added ZEN I/O Schreduler
Added fiops I/O Schreduler
Some Kernel Optimizations
GPU Overclock (533Mhz) (thanks to pinkflozd)
GPU Underclock (100Mhz) (thanks to pinkflozd)
Added Conservative GPU Governor
Permissive SElinux
Added LCD_KCAL
Added -02 optimization flags
Enabled Kernel NEON Mode
Init.d Support
Added Optimized ARM RWSEM algorithm
Added USB Fast Charge V2
Added KEXEC HARDBOOT PATCH
Added MSM HotPlug
Added Bricked HotPlug
Added Intelli HotPlug
Added Alucard Hotplug
Enabled On/Off Support for ARCH_POWER & GENTLE FAIR SLEEPERS
Added PegasusQ Governor
Added Fauxs Sound
Added High Performance Headphone Mode
Added Fsync On/Off Support
Updated CPU Boost Driver
Lots Of Tweaks and Optimizations
Update linux kernel 3.4.42 >> 3.4.107
Added DT2W & S2W VERSION
This kernel has now inbuilt SYNAPSE suport :highfive: , Big thanks and credits to @apb_axel for UKM
To tweak you will have to download Synapse from PlayStore created by Andrei Lux it includes all kernel features...
DOWNLOAD​
ATTACKED-KERNEL V8​
ATTACKED-KERNEL V8 (DT2W & S2W VERSION)​
OLD DOWNLOADS​
STOCK KERNEL FOLDER​
XDA:DevDB Information
ATTACKED KERNEL - STOCK, Kernel for the Moto G
Contributors
attack11, attack11, faux123, savoca, varun chitre , pinkflozd ,franciscofranco ,shivamk11, ion-storm, alin23, anarkia1976, neobuddy89 ,blechd0se ,myfluxy, F4k, hurtsky
Source Code: https://github.com/attack11/kernel-msm-lollipop
Kernel Special Features: Simple & Stable Kernel
Version Information
Status: Stable
Current Stable Version: V8
Stable Release Date: 2015-05-26
Created 2015-04-06
Last Updated 2015-06-08

Reserved
Changelog:
06-04-15
First Release
07-04-15
Second Release
Added Init.d Support
Added Optimized ARM RWSEM algorithm
Fixed Governors
Other changes check Git
09-04-15
Third Release
Added Alucard Governor
Added Fast Charge V2
Added KEXEC HARDBOOT PATCH (test please)
Fixed version not showing in settings
Tweaked SmartMax more battery friendly
Fixed weird frequencies
Disabled 96MHz overclock frequency (seems to work better at minimum 192 MHz)
Updated MSM HotPlug, It works a lot better now
Enabled ARCH_POWER and disabled GENTLE FAIR SLEEPERS
14-04-15
Fourth Release
Added Inbuilt SYNAPSE support (read OP)
Enabled On/Off Support for ARCH_POWER & GENTLE FAIR SLEEPERS
Added PegasusQ Governor
Added Fauxs Sound
Added Fsync On/Off Support
Lots Of Tweaks and Optimizations
Disabled CPU boost & SmartMax Governor for now (was causing issues)
22-04
Fiveth Release
Improved Synapse a little more for our device
Fixed some bugs
Added back SmartMax Governor
Added Alucard Governor
Added Intellimm Governor
Added Impulse Governor
Added Zzmoove Governor
Added back CPU Boost On/Off Support
02-05
Sixth Release
Update linux kernel 3.4.42 >> 3.4.107
Added DT2W
Added S2W
Added Alucard Hotplug
Disabled MPdecision & Touch Boost
Updated Installer script to install busybox & others...
04-05
Seventh Release
Reverted DT2W
Reverted S2W
Reverted Disabled MPdecision & Touch Boost
Updated Installer script & others...
26-05
Built From the scratch
Updates from Motorola & CM sources
New Updated Installer Script
Updated msm_hotplug
Added intelli_hotplug
Added Bricked_hotplug
Updated Cpu Boost Driver
Updated Interactive & Ondemand CPU Governor
Updated simple_ondemand GPU Governor
Added High Performance Headphone Mode
Update UKM with more stuff
Update S2W & DT2W VERSION
Some other stuff... Check git !

The Governors are working fine now !

Love u

Really waiting for it

Beauty!! I'm waiting long time for stock kernel

Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.

Awesome! I have been waiting for so long, does it have fauxsound support?

Cjit26 said:
Awesome! I have been waiting for so long, does it have fauxsound support?
Click to expand...
Click to collapse
No, read op, not in that list

init.d support? WIP or already included?

iDynamics said:
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Click to expand...
Click to collapse
Is your /data partition ext4 or f2fs?

iDynamics said:
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Click to expand...
Click to collapse
Great! so it works on GPE 5.1 too, Thanks!
Cjit26 said:
Awesome! I have been waiting for so long, does it have fauxsound support?
Click to expand...
Click to collapse
No, im not planning to add that feature yet, maybe its better to wait faux new kernel
celikbasm said:
init.d support? WIP or already included?
Click to expand...
Click to collapse
I am working on it, hopefully today i release a new version with fixed governors and init.d support

Oh okay, it works great so far man,good job :good:

attack11 said:
ATTACKED-KERNEL​
Click to expand...
Click to collapse
This guy is making lot of good contribution to the Moto G XDA community in the recent past.
I think we can repay him with a little gesture of appreciation.
I thought of making him a new sig.. Hope you like it attack11.. If no, let me know what changes you need.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for your kernels.
Cheers!!

The /data partition is ext4.

hmnk said:
This guy is making lot of good contribution to the Moto G XDA community in the recent past.
I think we can repay him with a little gesture of appreciation.
I thought of making him a new sig.. Hope you like it attack11.. If no, let me know what changes you need.
Thanks for your kernels.
Cheers!!
Click to expand...
Click to collapse
Wow, Thanks a lot! Its Perfect!

V2 its Out !
Changes:
Added Init.d Support
Added Optimized ARM RWSEM algorithm
Fixed Governors
Other changes check Git
There are some weird issues with some frequencies, please test, Cheers!

I cant able to download this kernel from AFH . I have no idea why this happens

I'll flash this on stock 5.0.2 later today and report in case i run into any issues. I wish that this version for stock roms becomes as good as the version for aosp / cm

Well for me on 5.1 GPE the camera gets broken and now when getting back to stock kernel the Wi-fi won't turn on.

[KERNEL]FlareM[LINARO][GCC 5.3.1][AOSP 6.0.x] ZE551ML/ZE550ML

Code:
/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
banner credits goes to : @misfitpierce
Kernel Features:​kernel.org Version : 3.10.101 (latest stable version)
Built with custom(self compiled) GCC 5.2.1 linaro toolchain
Alucard Hotplug
Nethunter Support (use nethunter kernels)
USB Ethernet Support
USB Adapter Drivers
Xbox One Support
Overcolcking-Underclocking (thanks to @TheSSJ)
CPU Optimizations
Interactive Governor from fugu
Intel powerclamp driver
Async FSync from HTC
BLX implemented (thanks to @TheSSJ)
BLK-throttle improvements
ZRAM support
LZ4 Compression
exfat support
ntfs r/w support
Set minimum brightness to 2 instead of 15 percent (thanks to @TheSSJ )
sweep2sleep (on by default )
UKSM
True Dynamic Fsync [faux123]
KSM optimized
PowerSuspend [Yank555.lu]​
CPU Governors:​
- Intel
- Alucard
- Lagfree
- ConverativeX
- BioShock
- LionHeart
- YankActive
- Adaptive
- Wheatley
- Darkness
- Hotplug
​
IO schedulers:​
- row
- sio
- zen
- vr
- fifo
- fiops
- tripndroid
TCP congestion algorithms :
-westwood (default, much faster speed)
-cubic
-reno
-bic
-highspeed
-htcp
-vegas
-veno
-Illinois
​
EXTRA Features :​
added init.d support
Implemented quickwake for better response
Power efficient Work queues for better battery
Tweaked Memory management
Downloads
builds :
Download​
​
Nethunter Kernels:
Download
FLASH THE ZIP VIA TWRP
kernel source :​
https://github.com/Zenfone2-Dev/kernel-FlareM​
if you want me to add any new feature leave a post ​
Credits: ​
@TheSSJ for his work on the stock kernel
@deadman96385 for his work on the CM 12.1 kernel
@crpalmer, @jrior001 for bringing up the zf2 and its kernel
@osm0sis for his work on anykernel.zip
​
_____________________________________________________________________________________________________________
XDA:DevDB Information
[kERNEL]FlareM[Linaro][CM-13.0]ZE551ML/ZE550ML, Kernel for the Asus ZenFone 2
Contributors
say99, [URL="http://forum.xda-developers.com/member.php?u=3520901]eoghan2t7[/URL]
Kernel Special Features: more governors, I/O shedulers, better memory managment, Async Fsync and more..
Version Information
Status: Stable
Current Version: FlareM_v16
Created 2015-12-12
Last Updated 2016-04-20

Reserved
roadmap :
add support for sweep2wake # working on that
see for possible solutions for tweaking sound
implement kernel-based thermal control
fix interactiveX and smartmax, smartmax seems to reboot the phone after third suspend and 10 secs
and more
for now :
use Interactive governor and deadline as I/O scheduler
limit max frequency to 1333Mhz for more battery and nice performance

Changelog:
v16 04/20/2016
GPU tweaks
CM updates
selinux set to enforcing by default (XOSP uses permissive )
Binder tweaks
enabled experimental configs
added tweaked simple ondemand GPU governor
mainline F2FS with encryption
compiled with GCC linaro 5.3.1
fixed all MM issues
optimized KSM
added deferred timer sysfs entry to control it.
and more underhead tweaks
improved stability.
v15 03/19/2016
kernel.org version 3.10.101
fixed selinux
smartassH3 governor
RTL8152/8150 support
Xbox one controller Support
fixed stability
Fixed reboots
QF9700 chip support
F2FS from mainline
Optimized Binder
more Atom optimization Flags
and much more
v14 02/22/2016
Build with my own linaro-gcc 5.2.1 toolchain
fixed all linux related issues
proper 3.10.96 linux
added back UKSM
Added alucard hotplug
atom optimizations
alucard min cpu online=2
v14OC build with OC
v14KVM build with KVM (No OC)
v14 without KVM and OC
More LZ4 work and compression and decompression
more power efficient work queues
added PowerSuspend
Tweaked L1 and L2 cache
fixed cpuset for hotplugging
Link Time Optimizations
Zen-tune for snappiness
Added Intel Cpu governor
Support for displaylink drivers (as module)
and more under-head tweaks
v13 02/04/2016
updated to latest kernel.org version : 3.10.96
v13k with KVM support
faster kernel decompression
added hotplug governor for real time hotplugging
Build with GCC 5.3.0
lockless wakeups for sched and futex
Hot plugging for the ram
Forced hot plugging on cpu0 no matter the governor
CPU workload consolidation
more underhead tweaks
better stability
v12 01/24/2016
updated to latest kernel.org version : 3.10.95
Introduced Intel power-clamp driver
Fixed MTP related issues
Cleaned a lot things
More USB ETHER drivers
Frankenstein Governor (based on interactive with hot plugging) # use with caution
Improved more on Stability
and more tweaks
v11 01/14/2016
improved stability
improved memory management(KSM)
Optimized KSM
Introduced power suspend
added darkness governor
updated to latest CM sources
USB HID keyboard/Mouse support
Kali Nethunter Support (working on bringing it up)
updated with latest ASUS source codes (MR912-v2.20.40)
Under hook tweaks
Reduced Latency
Decreased time to enter sleep
True Dynamic Fsync
Cleaned lot things
Applied grays patch to improve a bit of speed
fixed up upgrading
updated codecs and many other drivers
v10 01/06/2016
updated kernel.org version (3.10.94)
improved stability
improved battery backup (as per I have noticed)
UKSM
nothing more
more underhead tweaks
v9 01/01/2016
fixed ROW IO scheduler
fixed TripNDroid IO scheduler
fixed permission for workqueue
used O3 optimizations
improved wakelock.c (wakes up faster now)
ZRAM tweaks
many more underhead tweaks
v8 12/28/15
implemented sweep2sleep
unlocked gpu
fixed simpleondemand GPU governor for better scaling
tweaked readahead (a bit faster now)
fixed ext4 use Frandom
init.d is automatically created if it's not there
more tweaks . . . .
v7b 12/25/15 (Santa's gift )
decreased minimum brightness
a bit busy today cant do any more
v7 12/24/15
added tripndroid I/O scheduler
implemented blx
readahead tweaks
exfat support (module)
ntfs read write support (module)
v6b 12/21/15
fixed multi-core issue
used anykernel zip to make flashable zips (thanks to @eoghan2t7)
fixed issue of kernel not booting on recent cm builds (I am on todays build)
common zips for Z00A and Z008 from now
v6 12/20/15
added quickwake back
implemented google's snappy compression
implemented frandom to generate random no. much faster
enabled zram
synced with latest cm codes
tweaked interactive a bit
v5 12/18/15
added alucard governor and fixed it # phone seems better on alucard governor
added deadline as default for external card
updated to latest base code by CM (thanks to @jrior001 and @crpalmer)
v4b 12/14/15
enabled exfat support (had forgot to enable it in previous build)
added stock gpu drivers
no gpu unlocking for now
v4 12/13/15
added exfat support
added TCP congestion algorithms
westwood set as default
BLK-throttle improvements
renamed z008 version correctly
v3 12/12/15
added init.d support
implemented Async Fsync
improved work queue for better battery life
unlocked GPU for better scaling (thanks to @TheSSJ)
Improved memory management
v2 12/12/15
added UC(thanks to @TheSSJ)
v1 12/12/15
added several I/O shedulers and Governors

screenshots :

A good start buddy!
With some optimizations, it would be a great kernel. :good:

krasCGQ said:
A good start buddy!
With some optimizations, it would be a great kernel. :good:
Click to expand...
Click to collapse
thanks bro
next version will hopefully have UC

Good luck with this kernel, I'm very happy to see some guys like you support the ZF2 ! @say99 :good:

UC implemented flareM V2

Any chance for CM 12 version ?
Sent from my ASUS_Z00A using Tapatalk

tuilalnvinh said:
Any chance for CM 12 version ?
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
well yes but only for Z00A aka ZE551ML
but will need a tester cause I will testing cm 13 kernels for now

nothing for Z00D??

cieffe54 said:
nothing for Z00D??
Click to expand...
Click to collapse
will need a tester
pm if someone wants to be

say99 said:
well yes but only for Z00A aka ZE551ML
but will need a tester cause I will testing cm 13 kernels for now
Click to expand...
Click to collapse
Ok, i can be a tester, i'm using ze551ml 2GB Ram
Sent from my ASUS_Z00A using Tapatalk

tuilalnvinh said:
Ok, i can be a tester, i'm using ze551ml 2GB Ram
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
will pm you the link as soon as I finish adding features and compilation

Wil it work on Z008 build running cm13??

kjinx01 said:
Wil it work on Z008 build running cm13??
Click to expand...
Click to collapse
uploaded a test build #v2_z00D

k I will flash z00D build in my z008 and will report u.. And in case if it don't work wt do I need to do??

kjinx01 said:
k I will flash z00D build in my z008 and will report u.. And in case if it don't work wt do I need to do??
Click to expand...
Click to collapse
bro in the drive you will see a file named as flareMv2z00D.zip
flash that one its for z00D

Kk... I was asking for z008 build?? U compiled kernel for z008 running on cm13 pp

kjinx01 said:
Kk... I was asking for z008 build?? U compiled kernel for z008 running on cm13 pp
Click to expand...
Click to collapse
yes bro
test kernel z00A cm 12 up
testers can flash

[KERNEL]AssassinX[19-11][Nougat]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for bricked devices, dead SD cards, explosions,
thermonuclear war, or you getting fired because the alarm application failed,
Please read the thread carefully before deciding to flash this kernel. Flash this on your own risk.
Click to expand...
Click to collapse
AssassinX​
Features
Added tripndroid, sioplus, zen io schedulers
CRC improvements
vfs cache pressure to 50
lz4 compression
Added Adreno Idler[arter97]
Improved GPU frequencies[Umang96]
Upstream to 3.10.104
QC prima wireless driver to v3.0.11.66 [psndna88]
LA.BR.1.3.6_rb1.8 [psndna88]
Dynamic Fsync[faux123]
Added Powersuspend
Added elementalx governor[flar2]
Added Thunderplug[varunchitre15]
Added fiops, sio, bfq io schedulers
Disabled IO CRC check for better performance
exFAT & NTFS support
Kcal color control[Savoca]
Vibration intensity control
Compatible with fpc102x[Goodix support will be added]
Wake Gestures (sweep2wake & doubletap2wake)[flar2]
Sweep2sleep
USB fastcharge
Mild undervolting (stable)[Umang96]
Flashing Instructions:
1. Download the kernel[from #3]
2. Reboot to recovery
3. Flash the kernel
4. Reboot
Huge Thanks to:
TheStrix for his kernel base
amarullz for aroma installer
Toolchain: UBERTC 5.3.1
XDA:DevDB Information
AssassinX, Kernel for the Xiaomi Redmi Note 3
Contributors
@ssasin.monish
Source Code: [url]https://github.com/monishk10/kernel__kenzo[/URL]
Version Information
Status: Beta
Current Beta Version: v2.0
Beta Release Date: 2016-11-19
Created 2016-11-17
Last Updated 2016-11-19

Changelog
19-11
Added tripndroid, sioplus, zen io schedulers
CRC improvements
vfs cache pressure to 50
lz4 compression
Added Adreno Idler[arter97]
Improved GPU frequencies[Umang96]
Upstream to 3.10.104
QC prima wireless driver to v3.0.11.66 [psndna88]
LA.BR.1.3.6_rb1.8 [psndna88]
Dynamic Fsync[faux123]
Added Powersuspend
Added elementalx governor[flar2]
Added Thunderplug[varunchitre15]
17-11[Initial Build]
Added fiops, sio, bfq io schedulers
Disabled IO CRC check for better performance
exFAT & NTFS support
Kcal color control[Savoca]
Vibration intensity control
Compatible with fpc102x[Goodix support will be added]
Wake Gestures (sweep2wake & doubletap2wake)[flar2]
Sweep2sleep
USB fastcharge
Mild undervolting (stable)[Umang96]

DOWNLOADS
AndroidFileHost
v2.0
v1.0

Great will test

Gonna test

What is Mild undervolting (stable)??

android_smater said:
What is Mild undervolting (stable)??
Click to expand...
Click to collapse
Reduce the lower frequency to save battery

@ssasin.monish said:
AssassinX
17-11[Initial Build]
Added fiops, sio, bfq io schedulers
Disabled IO CRC check for better performance
exFAT & NTFS support
Kcal color control[Savoca]
Vibration intensity control
Compatible with fpc102x[Goodix support will be added]
Wake Gestures (sweep2wake & doubletap2wake)[flar2]
Sweep2sleep
USB fastcharge
Mild undervolting (stable)[Umang96]
Flashing Instructions:
1. Reboot to recovery
2. Flash the kernel
3. Reboot
Huge Thanks to: TheStrix for his kernel base
XDA:DevDB Information
AssassinX, Kernel for the Xiaomi Redmi Note 3
Contributors
@ssasin.monish
Source Code:https://github.com/monishk10/kernel__kenzo
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v1.0
Beta Release Date: 2016-11-17
Created 2016-11-17
Last Updated 2016-11-17
Click to expand...
Click to collapse
How much overclock?

samTheSlayer said:
How much overclock?
Click to expand...
Click to collapse
Where did he mention overclock?

ju1da said:
Where did he mention overclock?
Click to expand...
Click to collapse
He didn't that's why I wanted to know

samTheSlayer said:
He didn't that's why I wanted to know
Click to expand...
Click to collapse
Then
He didn't means
It don't... [emoji12]
Sent from my Redmi Note 3 using XDA-Developers mobile app

interesting kernel name...any philosopy behind it?

Gonna try and comment
Thx for hard work!

where version for miui base

android_smater said:
What is Mild undervolting (stable)??
Click to expand...
Click to collapse
Undervolting mean: Keep the same frequency but in lower CPU voltage, that's help CPU using less energy while providing same performance.
The only undervolting drawback: STABILITY. Instability may cause: random reboot, random choking, and it may not even boot if heavily undervolting.
Example:
Some CPU stable at [email protected], but some CPU have to use 1.10volt to stable at 2.0ghz. But some good quality CPU can be stable at [email protected]
Due to quality of the CPU dies, some cores have to use more energy to be stable. That's why manufacturer usually use a little higher voltage for their CPU to make sure it stable. The more quality of the CPU dies, the less voltage it needed.

No Custom Governors [emoji53] [emoji20] @@ssasin.monish
Sent from my Redmi Note 3 using XDA-Developers mobile app

kucingbaik2 said:
where version for miui base
Click to expand...
Click to collapse
I ll soon release

abid52 said:
No Custom Governors [emoji53] [emoji20] @@ssasin.monish
Click to expand...
Click to collapse
This is just an initial build. More builds will come soon with necessary features

kucingbaik2 said:
where version for miui base
Click to expand...
Click to collapse
where is op mentioned about mm roms
i think miui latest is on noughat which is not yet released for mi5

Archmage1809 said:
Undervolting mean: Keep the same frequency but in lower CPU voltage, that's help CPU using less energy while providing same performance.
The only undervolting drawback: STABILITY. Instability may cause: random reboot, random choking, and it may not even boot if heavily undervolting.
Example:
Some CPU stable at [email protected], but some CPU have to use 1.10volt to stable at 2.0ghz. But some good quality CPU can be stable at [email protected]
Due to quality of the CPU dies, some cores have to use more energy to be stable. That's why manufacturer usually use a little higher voltage for their CPU to make sure it stable. The more quality of the CPU dies, the less voltage it needed.
Click to expand...
Click to collapse
these voltages depend on The quality of the cpu used in the devices ( identified by cpu binning )
The better the quality the lesser the voltage it needs to run for the defined set of frequencies.
for example this is my voltage table :

Reloaded Kernel X6 [08/05][Stable][OverClocked][MN/N][F2FS & Kexec][Yureka/+]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void. Nah! Just kidding No warranty is void in YU. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Reloaded Kernel was build keeping in mind the the stability and performance of your device.
A lots of battery Saving tweaks also applied to keep the battery consumption minimal.
Experience your zeus like never before.
Features
CPU Governors
ElementalX
Conservative
Darkness
Impulse
Intelliactive
Interactive
Ondemand
Performance
Powersave
Smartmax_eps
CPU Hotplug
ThunderPlug
Alucard
IO Schedulers
BFQ
FIOPS
NOOP
ROW
DEADLINE
CFQ
SIO
SIOPLUS
ZEN
Common
Kernel Upstream to 3.10.104
OverClocked Big Cluster upto 1.71GHz
OverClocked Little Cluster upto 1.21GHz
CPU Optimization
GPU Optimization
Kexec and F2FS Support
Added support for zRAM and zsmAlloc with LZ4 Compression
Reloaded Thermal System (Based on IntelliThermal v3.1)
KCal(Screen/Vibrance-Control) v2
PowerSuspend Drivers v1.7
Tweaks for better Performance and Battery life
Optimization on Interactive Governor
Support for Fast Charging (ThunderCharge 2.1)
Support for Adreno Idler
Support for Dynamic Sync
Support for Power Efficient Work Queues
WakeLock Toggles
Vibration Controller
Low-Memory Killer
Wake-Up Gestures
Interactive init.d script for better performance
Credits
CM Team
YU Televentures
Shoaib05 (for kernel upstream and many important commits)
Aayushrd7 (For Helping)
darshan1205 (For helping)
If you like my work, consider buying me a cup of coffee
XDA:DevDB Information
Reloaded Kernel, Kernel for the YU Yureka
Contributors
riteshsaxena, CM Team, Yu Televentures, Sanyam Jain, Aayush Bucha, Shoaib Anwar, Darshan Manjrekar
Source Code: https://github.com/RiteshSaxena/Reloaded_tomato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: X6
Stable Release Date: 2017-05-08
Created 2017-02-15
Last Updated 2017-05-08

Notes
Use Kernel Adiutor-MOD to apply settings! Download Link for Kernel Adiutor-MOD--https://github.com/yoinx/kernel_adiutor/raw/master/download/app/app-release.apk
Changelogs and Downloads
X6
Changelogs and Download
X5
Changelogs and Download
X4
Changelogs and Download
X3
Changelogs and Download
X2
Changelogs and Download
Old Build available here:http://forums.yuplaygod.com/threads...ed-mn-n-f2fs-kexec-random-reboot-fixed.46152/
Recommended Settings
===============PERFORMANCE===============
CPU Tab
Big Cluster
Max-1700MHz
Min-800MHz
Governor-intelliactive
Little Cluster
Max-1200MHz
Min-800MHz
Governor-intelliactive
GPU
Max-550
Min-220
Governor-msm-adreno-tz
Adreno Idler-> OFF
============BALANCED (BAISED TOWARDS PERFORMANCE)============
CPU Tab
Big Cluster
Max-1700MHz
Min-200MHz
Governor-interactive with init.d tweaks
Little Cluster
Max-1200MHz
Min-200MHz
Governor-interactive with init.d tweaks
GPU
Max-550
Min-220
Governor-msm-adreno-tz
Adreno Idler- ON
============BALANCED (BAISED TOWARDS BATTERY)============
CPU Tab
Big Cluster
Max-1500MHz
Min-200MHz
Governor-smartmax_eps
Little Cluster
Max-1000MHz
Min-200MHz
Governor-impulse
GPU
Max-465
Min-220
Governor-Simple ondemand
=============EXTREME BATTERY===============
CPU Tab
Big Cluster
Max-600MHz
Min-200MHz
Governor-Smartmax_eps
Little Cluster
Max-800MHz
Min-200MHz
Governor-smartmax_eps
GPU
Max-400
Min-220
Governor-Simple ondemand
===============COMMON===============
CPU Hotplug
As Per your Preference
Thermal
Set Temp limit to 50
Wake Locks
Turn off all. Enable them if any problem arises.
Power and Battery
Enable Charge Rate
Charge Rate -> 1250
IO Scheduler
ZEN for Internal and BFQ for External
Wake Controls
As per your Preference.
Misc
Turn off android logging
Turn on Dynamic Fsync

Update: Reloaded X2​Changelogs
*Merge Latest Lineage upstream
*Merge latest CAF Code i.e., Branch 1.11
*Fixed Random Reboot on low Wi-Fi
*Completely Removed Sound Mod
*Removed GPU OC
*Better interactive init.d script added.
*Removed the Optimize for size flag, so that means improved performance.
*Proper -O3 Optimizations for GPU, much better gaming
*More Optimizations for Fluid Performance
*Battery Tweaks
*Removed many useless tweaks
Downloads
[SIZE="4"]http://ouo.io/FEwnSS[/SIZE]

Will it work with resurrection remix v5.8.0?

ndasarathy said:
Will it work with resurrection remix v5.8.0?
Click to expand...
Click to collapse
Yes.

riteshsaxena said:
Yes.
Click to expand...
Click to collapse
Download link not working, could you please provide a mediafire or androidhost link?

KuntalBiswas said:
Download link not working, could you please provide a mediafire or androidhost link?
Click to expand...
Click to collapse
Click on skip ad and you will be redirected to android file host

Work in Cm 12.1???

Update: Reloaded X3
Changelogs
*latest lineage upstream
*more balanced interactive script
*minor bug fixes
*more optimization for smoothness.
*Added TripNDroid IOSCHED
*Faux Sound Mod v3.6 (Optional)
Downloads
Without Sound Mod: http://ouo.io/H0Gpt
Sound Mod: http://ouo.io/7Dyg1
Enjoy the Fluidity
Regards,
Ritesh

will it work in lineage 0s 14.1?

Jeet Joshi said:
will it work in lineage 0s 14.1?
Click to expand...
Click to collapse
Yep

Thnx
Will try X3 on RR5.8.2

riteshsaxena said:
Changelogs
*latest lineage upstream
*more balanced interactive script
*minor bug fixes
*more optimization for smoothness.
*Added TripNDroid IOSCHED
*Faux Sound Mod v3.6 (Optional)
Downloads
Without Sound Mod: http://ouo.io/H0Gpt
Sound Mod: http://ouo.io/7Dyg1
Enjoy the Fluidity
Regards,
Ritesh
Click to expand...
Click to collapse
Thx for the X3
What is the functionality of the Sound Mod. Does it require any additional changes?
Can u guide on this
Im gonna use it on Official RR5.8.2 (for your reference)

It can be used to alter sound volumes beyond the system available values.

mohammad.nomaan said:
Thx for the X3
What is the functionality of the Sound Mod. Does it require any additional changes?
Can u guide on this
Im gonna use it on Official RR5.8.2 (for your reference)
Click to expand...
Click to collapse
It can be used to alter sound volumes beyond the system available values. You need kernel auditor to use it.

riteshsaxena said:
It can be used to alter sound volumes beyond the system available values. You need kernel auditor to use it.
Click to expand...
Click to collapse
Thnx for the information
I flashed X3 on YU+ RR5.8.2 official ROM
Settings to be edited via Kernel auditor app.
Can u share settings
Thnx
Sent from my YU5510 using Tapatalk

mohammad.nomaan said:
Thnx for the information
I flashed X3 on YU+ RR5.8.2 official ROM
Settings to be edited via Kernel auditor app.
Can u share settings
Thnx
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Its there in the second post.

riteshsaxena said:
Its there in the second post.
Click to expand...
Click to collapse
Thnx
I used the settings for Performance and Common as per 2nd post in the Kernel adiutor app.
Can't find settings for sound mod.
Do I need to do any extra settings???
Sent from my SM-N920C using Tapatalk

Update: Reloaded X4​​Changelogs
*Latest Lineage upstream
*F2FS Fixed and tested
*Reverted smartmax to its original values, means better battery.
*Removed intellithermal due to heating issues.
*Added temp limit in msm thermal
*Updated the interactive script
*Re-added lionfish cpu governor and VR iosched
*Lot of internal changes and minor bug fixes.
Downloads
Without Sound Mod: https://www.androidfilehost.com/?fid=817550096634751128
With Sound Mod: https://www.androidfilehost.com/?fid=817550096634751129
This is the most stable and battery efficient version of Reloaded but still the performance isn't sacrificed.​

Will it work with CRdroid v2.3 & resolve random boot issue on wifi??

[KERNEL][9.0/10.0] Pop Kernel reborn

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/* *** Disclaimer
* Your Warranty is now Void!
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
Introduction
Hello everyone,
Pop Kernel is reborn;
the goal of this kernel is to be stable and have many features
Features
-Compiled With UberTC GCC 7.x.x
-Compiled With hybrid -O2/-O3 optimization level (Oreo/Pie)
-Updated with the latest Lineage sources(LOS versions)
-Underclock cpu to 268Mhz
-Underclock gpu to 100Mhz and idle to 27Mhz
-CPU Governors: Blu_active, interactive(Updated from francisco franco kernel for hammeread), conservative(tweaked), all stocks
-Hotplugs: Mpdecision(tweaked but disabled by default), Lazyplug(tweaked but disabled by default)
-I/O: Maple, Zen, All stocks
-Faux sound control
-Sultan cpu input boost (replace our cpu boost driver)
-Adreno idler
-Disable some unnecessary debugs
-Reduced some voltages by default
-More tweaks(check source)
Exclusive Q feature (all features above are present unless otherwise specified )
-Compiled With QUVNTNM-TC 7.x.x with cortex a15 optimizations
-Compiled With -Os optimization level with some part compiled with -O3 to compensate performace regression due to -Os (Q)
-CPU Governors: smartmax, smartmax_eps, intelliactive, zzmoove
-Hotplugs: Bricked hotplug, AutoSMP, blu_plug
Installation instructions
--Reboot in recovery
--Wipe dalvik cache,cache(recommended)
--flash kernel
Download
Download last Oreo/Pie version
Download last Q version
Thanks To
Code:
-LineageOS team
-Google
-Motorola
-hypertoolchains team
-franciscofranco
-flar2
-faux123
-much others.
XDA:DevDB Information
Pop Kernel reborn, Kernel for the Moto X 2014
Contributors
linckandrea
Source Code: kernel
Kernel Special Features:
Version Information
Status: Testing
Created 2019-09-04
Last Updated 2019-09-04

Tweaks part 1​
Cpu governor
this kernel come with many cpu governor hoewer i suggest to choose only :
interactive (default)
blu_active
ondemand
lolz_snappy
Intelliactive
The best governor for:
everyday usage (light) = interactive or smartax or smartax_eps
everyday usage (moderate) = interactive or ondemand or intelliactive
everyday usage (intensive) = blu_active or lolz_snappy
games = performance
music/video playback = intelliactive or smartax or smartax_eps
Note: some governor performs better when they are tweaked, at the of this post you will find a zip with some amazing profiles (IHMO).
==========================================================================================================
Cpu Hotplugs:
this kernel is shipped with AUTOSMP, Lazyplug, Bricked hotplug, blu_plug
there are many guides out there that explain their best use scenario
hoewer is suggest interactive with bricked hotplug for moderate usage
when you are using a hotplug is hightly suggested to enable cpu.notify_on_migrate
the sysf path is "/dev/cpuctl/cpu.notify_on_migrate" (0 = disabled) (1 =enabled)
==========================================================================================================
Cpu-boost driver:
This kernel come with 2 cpu input boost driver:
Caf cpu boost(enabled by defautl) and Sultan's cpu input boost
both are tweaked by default
Caf cpu boost has the ability to boost all online cpu to the max freq when an app is launched to reduce latency, to enable this option you need to change the parameter in
"/sys/module/fork/parameters/boost_when_app_is_launched" from "N" to "Y" (N = disabled) (Y = enabled)
IMPORTANT:
use only one at the same time
AUTOSMP and blu_plug have their own input boost so when you use one of them disable both caf and sultan's cpu boost
==========================================================================================================
Gpu governor:
I reccomend to stay with the default governor and enable adreno_idler if are wathing video or play music to reduce power consumption
==========================================================================================================
I/O scheduler
i suggest to stay with maple since is tweaked by default and perform better in any case scenario that i tested
==========================================================================================================
Ksm:
i writed some modification to the ksm driver, now it can be disabled or it can use differt tunables when screen is off
"ksm_thread_pages_to_scan_display_off" & "ksm_thread_sleep_millisecs_display_off"
which are equivalent to ksm_thread_pages_to_scan & ksm_thread_pages_to_scan but they are enabled when screen is off (so you should use more relaxed values)
syfs path for both values are "sys/kernel/mm/ksm"
if you want disable ksm whem screen is off the parameter can be found in "sys/module/ksm" (N = disabled) (Y = enabled)
==========================================================================================================
Misc:
when the screen is off the kernel can compact zones and drop cache in the RAM;
to enable this feature the sysf path is here "sys/module/compaction/enable_drop_cache" (N = disabled) (Y = enabled)
you can even modify the interval "sys/module/compaction/interval"
==========================================================================================================
Kcal settings:
I collected some kcal profiles to archive a better color reproduction those profiles can be found in zip at the end of the post
==========================================================================================================
Filesystem:
Our phone support both f2fs and ex4
Ext4 is suggested for system partition
F2fs for data and cache partions

Tweaks part 2​
I made a collection of the best governor settings; kcal profiles and the all kernel parameters mentioned in the upper post (that aren't avaible in any kernel manager by default)
if you are using elementalx you can directly insert the folder inside your memory and enjoy, if you are using any other kernel manager you can benefit anyway but you will need to apply manually those settings
DOWNLOAD KERNEL TWEAKS

i don't exactly know if it's kernel's problem...
device is taking more than 5-8 hrs to fully charged.
device shutdowns if charger is unplugged after 90%
I'm on Lineage OS 16 official rom

New version
Changelog:
1.Underclock cpu to 268Mhz
2.Underclock gpu to 100Mhz and idle to 27Mhz(is disabled by default so you need to enable it)
3.Set optimal value for cpu input boost(is disabled by default so you need to enable it)
4.Add adreno idler
5.Disable some unnecessary debugs
Download
Bristow Xavier said:
i don't exactly know if it's kernel's problem...
device is taking more than 5-8 hrs to fully charged.
device shutdowns if charger is unplugged after 90%
I'm on Lineage OS 16 official rom
Click to expand...
Click to collapse
Probably a logcat would be useful...
anyway on my phone i don't have problem with charge mode( i NOT touched charger stuff on my kernel)

noob question, how do u enable those features (hotplugs, cpu input boost, etc..) that is disabled by default? cant see them in kernel manager im using FK's

New version
Changelog:
1.Merged last Lineageos kernel commits
2.Dropped 02 in favor of Os
3.Dropped f2fs support
This version like the others is not backward compatible
Download

linckandrea said:
New version
Changelog:
1.Merged last Lineageos kernel commits
2.Dropped 02 in favor of Os
3.Dropped f2fs support
This version like the others is not backward compatible
Download
Click to expand...
Click to collapse
Hi linckandrea,
First, thank you for your great work, it is great to see our old moto x 2014 is still alive
Do you think it is a good idea to flash your lastest kernel for android 9.0 with the lastest version of Lineage OS 16 for victara? If not, I would like to merge your kernel source for android 9.0 with the one from Lineage OS 16 and built it. I am going to follow this reference https://forum.xda-developers.com/android/software-hacking/reference-how-to-compile-android-kernel-t3627297 Is this procedure ok? or Am I missing some intermediate step?

xehartnort said:
Hi linckandrea,
First, thank you for your great work, it is great to see our old moto x 2014 is still alive
Do you think it is a good idea to flash your lastest kernel for android 9.0 with the lastest version of Lineage OS 16 for victara? If not, I would like to merge your kernel source for android 9.0 with the one from Lineage OS 16 and built it. I am going to follow this reference https://forum.xda-developers.com/android/software-hacking/reference-how-to-compile-android-kernel-t3627297 Is this procedure ok? or Am I missing some intermediate step?
Click to expand...
Click to collapse
hi you can flash the latest version for pie with the latest version of los16 without problems

Download version for Android 10 but gives error in twrp when flashing, error 1 wrong Android version even though I'm on Android 10

BIG UPDATE !!!
Changelog:
1.Merged last Lineageos kernel commits
2.Added wake gestures ( D2W, S2W, S2S )
3.Reworked lazyplug hotplug (all cores are now online when screen is on)
4.Added bricked and AutoSMP hotplug
5.Tweak intelliactive governor to not boost when screen is off
6.Added zzmoove cpu governor
7.Simple gpu algorithm by faux
8.Add some tweaks to ksm by me
Now you can disable it when screen is off in order to allow the device to go in deep sleep much easier
you can also set
"ksm_thread_pages_to_scan_display_off" & "ksm_thread_sleep_millisecs_display_off"
which are equivalent to ksm_thread_pages_to_scan & ksm_thread_pages_to_scan but they are enabled when screen is off (so you should use more relaxed values)
"ksm_thread_pages_to_scan_display_off" & "ksm_thread_sleep_millisecs_display_off" tunables can be found in "sys/kernel/mm/ksm"
if you want to disable ksm when screen is off, the parameter can be found "sys/module/ksm" , parameters allowed are "Y" (to enable) and "N" (to disable)
Download

Minor update
i recently submitted to lineageos gerrit some patch for bring back f2fs support
so this update is futureproof
DOWNLOAD

Major update
changelog:
1.merged binder from 3.18
2.sched tweaks
3.added blu plug and blu active
4.added kcal and klapse
5.Cpu voltage control
6.many others
IMPORTANT:
this version will kill lineage livedisplay in favour of klapse a live display driver more customizable
DOWNLOAD
Tweaks
i also made a collection of the best governor settings; kcal profiles and some kernel parameters that aren't avaible in any kernel manager by default
if you are using elementalx you can directly insert the folder inside your memory and enjoy, if you are using any other kernel manager you can benefit anyway but you will need to apply manually those settings
DOWNLOAD KERNEL TWEAKS

linckandrea said:
if you are using elementalx you can directly insert the folder inside your memory and enjoy, if you are using any other kernel manager you can benefit anyway but you will need to apply manually those settings
Click to expand...
Click to collapse
Hi. Do you have a settings file for Franco Kernel Manager?

renzs said:
Hi. Do you have a settings file for Franco Kernel Manager?
Click to expand...
Click to collapse
Unfortunatley no, but if you want to create settings files for franco kernel manager please share them here

Hi, all, have this kernel in Android Q support for Texas Instruments audio chp? in other releases of android more old, yes.

Hey, I've been using your kernel for ~half a year now and it's great.
I installed it, the Smartpack Kernel Manager and Magisk (for root for the manager).
It's awesome, K-Lapse is much nicer than Live Display, GPay didn't break (yay), I could tweak a few minor things that always bugged me, and through undervolting (and -clocking) I could even mitigate (to almost eliminate) the battery-shutdown-issue!
The only thing I was missing, was the "wave to preview notifications" feature from Ambient Display. But a few weeks after I installed the kernel, it started working again. (Im 90% sure I didn't update LOS, it just suddenly started working.) I have no idea why, but I didn't dare to update LOS or Magisk since for fear it might break again, maybe you have any
Now that LOS 18.1 is out, I was wondering - if this kernel doesn't work for 18.1 (which I assume it won't?) - are you planning to update it to do work? It's really amazing how much more useful live I was able to get out of the phone by tweaking the kernel.
Thanks for your work.