Database Develop

Headphone water damage sensor

As a great phone this is I'm concerned with where Sony have placed the water markers.
I understand that they are there for their protection but the top one really annoys me when I'm listening to music.
It would be great to have a water resistant phone that you could take out your pocket in the rain to change tracks ect. in ore of peoples expression 'Your getting your phone wet!'.
I wish Sony to a leaf out of Apples book placed theres underneath the headphone jack like the iPhone.
Any one agree?

My sensor under the headphone flap has already gone pinkish. living it england its hard not to get a little bit of rain on it when out at the shops and changing tracks. no idea what this would mean for my warranty.

Crucio_ said:
My sensor under the headphone flap has already gone pinkish. living it england its hard not to get a little bit of rain on it when out at the shops and changing tracks. no idea what this would mean for my warranty.
Click to expand...
Click to collapse
My thoughts exactly.

it seems like sony could easly refuse to repair a device, even if it's not your fault...

I am thinking of placing a small sticker over the water marker to prevent it from triggering.

PsyMonkey said:
I am thinking of placing a small sticker over the water marker to prevent it from triggering.
Click to expand...
Click to collapse
could you prevent it with a method that simple? and what would you prefer to remove the sticker in case of using the warranty?

i'm also curious as if this method is ok . I think sony would have thought about the sticker thing and maybe the sensor also reacts to something else like glue ...

What about sony's water resist warranty? If the stickers' colour changed to red, that means the phone got water from this places. Even flaps are correctly closed, If there is some faulty on the flaps the phone will get water.
So, i think it's not big problem the place of stickers, inside the phone or just near the plug.
Sent from my C6603 using xda app-developers app

The way I use my phone, the jack is on the bottom. I have it on a neck strap using the lanyard hook, so it holds the phone upside down. I ride a pushbike everywhere, work, in the rain so works out well this way for me. This was a selling point to me on the phone - lanyard strap, water resistant. When I rode with my iphone I had it in a grungy neck bag, and when it rained I either hoped for the best, or put it in a plastic bag...

If you triggered your water sensor somewhere - it doesn't mean your warranty is immediately void. If your phone dies from water damage, they check the covers and make their tests. If they leak - they'll repair your phone. If they don't, it means you left it open, doesn't really matter if your sensors turned pink or not - it's just for Sony, to let them know where the damage most likely happened.
Btw. just get an SBH20 bluetooth headset, problem solved. It's great and you can use any headphones with it

Akiainavas said:
If you triggered your water sensor somewhere - it doesn't mean your warranty is immediately void. If your phone dies from water damage, they check the covers and make their tests. If they leak - they'll repair your phone. If they don't, it means you left it open, doesn't really matter if your sensors turned pink or not - it's just for Sony, to let them know where the damage most likely happened.
Btw. just get an SBH20 bluetooth headset, problem solved. It's great and you can use any headphones with it
Click to expand...
Click to collapse
Yeah, but the SBH20 isn't waterproof... I guess a cheaper sacrifice than
It'd be fantastic if you could get cordless Bluetooth canalphones. One day they'll be able to get that stuff small enough...

I had wondered if this was bugging anyone else, it's a real bug bear to me since I usually use my phone for music every day, but living in the UK it likely to get some drops of rain in.
This means not only am I forced not to use my favourite headphones, but also that I have to buy one of those SBH20s.
The door itself is a PITA as well cause I fear it might snap of while open when taking the phone in and out of my pocket.
Sent from my C6603 using Tapatalk 2

That's the problem for me, the sensor is already pink just after 1 month of using the jack audio connection for my headphone, morality, you definitively need a bluetooth headphone or you will break the warranty. I've returned the phone to my provider that they confirmed that break the warranty BUT after contacting Sony with them, Sony confirmes that they always open the phone to really check if it's water damaged or not, if not, if it's just the sensor you haven't to worry but Sony is warning us by telling that some providers will certainly refuse to send the phone to be repairing by seeing the sensor, so if your phone is really damaged and you have the red sensor, you can cry.
For my case i've taken the bigest warranty for my phone, even if i destroy it myself i just need to pay the franchising of 50€ and they change it immediatly.

Mobe1969 said:
Yeah, but the SBH20 isn't waterproof... I guess a cheaper sacrifice than
It'd be fantastic if you could get cordless Bluetooth canalphones. One day they'll be able to get that stuff small enough...
Click to expand...
Click to collapse
Check out plantronics backbeat go. It's in ear, light and water resistant. Only thing it its not NFC enabled.

ninehneh said:
Check out plantronics backbeat go. It's in ear, light and water resistant. Only thing it its not NFC enabled.
Click to expand...
Click to collapse
Are they any good? They're awfully cheap.
Sent from my C6603 using Tapatalk 2

For waterproof bluetooth hearphone i suggest you :
Motorola S10-HD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-------------------------
Philips ActionFit SHB6000
-------------------------
Splashbudz
-------------------------
JayBird Freedom (certainly the best choice)
Source : http://waterproofbluetoothheadphones.com

QualQuek said:
For waterproof bluetooth hearphone i suggest you :
Motorola S10-HD
-------------------------
Philips ActionFit SHB6000
-------------------------
Splashbudz
-------------------------
JayBird Freedom (certainly the best choice)
Click to expand...
Click to collapse
I've still not seen anything that impresses me, nothing with AptX or bluetooth better than 2.1.

alias_neo said:
I've still not seen anything that impresses me, nothing with AptX or bluetooth better than 2.1.
Click to expand...
Click to collapse
Very constructive, you have something better? We're all listening to you.

QualQuek said:
Very constructive, you have something better? We're all listening to you.
Click to expand...
Click to collapse
It's no slur on the contributions of the other posters here, I'm trying to say that there is nobody making anything worth looking at these days.
It's an expression of frustration at the state of things, soon as I find something, I'll make sure it's right here, so far the SBH20 seems the best option, but even hats not yet available.
Sent from my C6603 using Tapatalk 2

alias_neo said:
Are they any good? They're awfully cheap.
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
sorry i can't give you a review as i don't own a pair. but i do like the design, as it fits nicely with spectacle users compared to some other models.

Can these repairs be covered by warranty?

So I just got another xperia Z, used, from ebay, and there is 2 issues that i think could be warranty issues.
1) the tape under the seals is red, not white, showing water leakage? I saw reports of this from poeple on the forum, do sony cover repairing seals? This was the special launch bundle with headphones etc. so it is one of the first off the line
2) there is a blemish on the right hand corner, which lines up with where the dock clips in, could this have been caused by the dock? if so is this covered by warranty. See the images below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

dh2311 said:
So I just got another xperia Z, used, from ebay, and there is 2 issues that i think could be warranty issues.
1) the tape under the seals is red, not white, showing water leakage? I saw reports of this from poeple on the forum, do sony cover repairing seals? This was the special launch bundle with headphones etc. so it is one of the first off the line
2) there is a blemish on the right hand corner, which lines up with where the dock clips in, could this have been caused by the dock? if so is this covered by warranty. See the images below
Click to expand...
Click to collapse
I guess sony wont cover those small damages, I even got a small dot on a gorilla glass, I peeled of the screen protector but when I cleaned it with soft cloth I discovered very tiny dot (scratch) and I got very pissed, it is almost invisible but I hate to know that my phone has a scratch because I always take care of my phone and I'm very careful! I also was interested if the could polish the screen or something but they said it's not a factory damage and would not repair it. I had Xperia S and I promised myself not to buy SONY products because of build quality and again I did it! I'm very disappointed Hope Honami will be better

MADNJPN said:
I guess sony wont cover those small damages, I even got a small dot on a gorilla glass, I peeled of the screen protector but when I cleaned it with soft cloth I discovered very tiny dot (scratch) and I got very pissed, it is almost invisible but I hate to know that my phone has a scratch because I always take care of my phone and I'm very careful! I also was interested if the could polish the screen or something but they said it's not a factory damage and would not repair it. I had Xperia S and I promised myself not to buy SONY products because of build quality and again I did it! I'm very disappointed Hope Honami will be better
Click to expand...
Click to collapse
Upon closer inspection, the issue with the screen is more because it has been replaced badly (didnt know this before), the corner is not stuck down properly, so sticks up and makes it easier to damage, all that has happened is the black bezel has come off a small chunk in the corner, meaning it is just clear, as it lights up when you turn the screen on. Also pushing on the sides of the screen presses on the actual LCD, just a really poor repair!
Still wondering about the pinkish tabs under the flaps though

:X I cant imagine how you feel :X Take my deepest condolences

dh2311 said:
Still wondering about the pinkish tabs under the flaps though
Click to expand...
Click to collapse
It means those tabs have come in contact with water.They are originally white.

Hubriss said:
It means those tabs have come in contact with water.They are originally white.
Click to expand...
Click to collapse
I know, but the seller swears its never been near water, and ive seen reports of leaky seals, as this is a launch day model its likely not been fixed, so would that be covered by warranty is the question

dh2311 said:
I know, but the seller swears its never been near water, and ive seen reports of leaky seals, as this is a launch day model its likely not been fixed, so would that be covered by warranty is the question
Click to expand...
Click to collapse
I read somewhere that Sony service center refusing warranty(hardware related) if those indicators go pink.I don't really know if they are going to treat initial batches any differently.

Hubriss said:
I read somewhere that Sony service center refusing warranty(hardware related) if those indicators go pink.I don't really know if they are going to treat initial batches any differently.
Click to expand...
Click to collapse
They can easily be returned back to white using chlorine/bleach. I'm in no WAY saying the OP should do that, but i was wanted to leave this here.

Feddey said:
They can easily be returned back to white using chlorine/bleach. I'm in no WAY saying the OP should do that, but i was wanted to leave this here.
Click to expand...
Click to collapse
Well..that's a great idea(if it works!) for those who want to claim warranty for hardware related problems.One could carefully rub some on it using an ear-bud or something.

Hubriss said:
Well..that's a great idea(if it works!) for those who want to claim warranty for hardware related problems.One could carefully rub some on it using an ear-bud or something.
Click to expand...
Click to collapse
If you break your own device man up and pay up. The only reason i left this here was because it wasn't due to hardware.

Just to update people on this, the phone is going back, the screen was poorly replaced and is loose on 2 corners, the back is also loose from where it has been dropped, so a combination of not well looked after and poor build quality really. Not going to stop me buying the honami on launch day though. I'm hoping for a Honami and Smartwatch 2 bundle

dh2311 said:
Just to update people on this, the phone is going back, the screen was poorly replaced and is loose on 2 corners, the back is also loose from where it has been dropped, so a combination of not well looked after and poor build quality really. Not going to stop me buying the honami on launch day though. I'm hoping for a Honami and Smartwatch 2 bundle
Click to expand...
Click to collapse
Send this destroyed phone him back. He lied to you about phone. He must give your money back.

[Q] Screen unresponsive (hardware problem)

Hey guys,
My phone is Xperia V as many of you might know.. It fell out of my pocket last night.
The upper screen above the Sony logo got a little crack, but that's not the thing i'm worried about..
The bottom of the screen became unresponsive :/
Bad luck i guess. The screen displays perfect, it is just unresponsive to touch inputs.
Also, i'm out of warranty. Not only cause my bootloader is unlocked, the warranty period ended 4 months ago.
(relocked bootloader and reverted to stock, still nothing)
Look at this quick image if you don't know what i mean:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I honestly don't think there's an easy solution myself, but just thought of creating a thread anyway who knows..
What to do?

3 months ago, my xv fell out of my pocket too and upper screen above the Sony logo got cracked and my screens upper part became unresponsive I took it to repair center,and the found out that the touch input was broked. Because xv uses sensor on lens, I had to replace both screen & touch input together. It cost me about 100 dollars.

Aria.A97 said:
3 months ago, my xv fell out of my pocket too and upper screen above the Sony logo got cracked and my screens upper part became unresponsive I took it to repair center,and the found out that the touch input was broked. Because xv uses sensor on lens, I had to replace both screen & touch input together. It cost me about 100 dollars.
Click to expand...
Click to collapse
Looks like i have a similar problem then I'm taking it to the service center asap, let's see what they'll say.
Were you under warranty when yours stopped working?
And thanks for the response mate

NuriJ said:
Looks like i have a similar problem then I'm taking it to the service center asap, let's see what they'll say.
Were you under warranty when yours stopped working?
And thanks for the response mate
Click to expand...
Click to collapse
Yep, cracked mine a while ago, and it renders whole touch screen useless unlike some other phones. Managed to replace it myself, fiddley but do-able if you have some experience in taking phones apart.

really seems to be a hardware problem....maybe the colonel can give a little hint on how to repair it.
i think this is the part u need http://www.amazon.de/OnceAll-Digitizer-Screen-Display-XPERIA/dp/B00FHIO6C8

could u plz make us a 4.3 custom kernel if we help u resolve the issue?

MiG123 said:
could u plz make us a 4.3 custom kernel if we help u resolve the issue?
Click to expand...
Click to collapse
C'mon!!! this guy already made an awesome kernel for 4.1 without asking anything!
It's not fair to ask something from him before helping. Help him for God's sake if u can!
---------- Post added at 11:16 AM ---------- Previous post was at 11:09 AM ----------
NuriJ said:
Looks like i have a similar problem then I'm taking it to the service center asap, let's see what they'll say.
Were you under warranty when yours stopped working?
And thanks for the response mate
Click to expand...
Click to collapse
U can operate your phone with mouse over OTG cable. Using a mouse, go to developer options and enable show touches. I saw some touch points upper of my screen around the cracked area. Btw, I was not under warranty.

Thanks for the help y all, i am taking it to the service center today, let's see what they have to say. In case repairing is too expensive, i will do it manually.
doenen said:
really seems to be a hardware problem....maybe the colonel can give a little hint on how to repair it.
i think this is the part u need http://www.amazon.de/OnceAll-Digitizer-Screen-Display-XPERIA/dp/B00FHIO6C8
Click to expand...
Click to collapse
Yeah, this is what i need.. but do i need to choose a specific one? I don't know much about screens, but do i take the risk of getting a cheap TMD panel? Or does LCD screens have nothing to do panels? @colonel_lp

NuriJ said:
Thanks for the help y all, i am taking it to the service center today, let's see what they have to say. In case repairing is too expensive, i will do it manually.
Yeah, this is what i need.. but do i need to choose a specific one? I don't know much about screens, but do i take the risk of getting a cheap TMD panel? Or does LCD screens have nothing to do panels? @colonel_lp
Click to expand...
Click to collapse
The digitizer and LCD are one, so yes you do take the risk of getting a cheap panel. There are many on ebay, i looked for one that had a similar code on the back to mine, which was a Sharp panel. I don't remember the code now...
The phone comes apart really easily, apart from the hardest part of getting the old screen off, (a real PITA). I used a hairdryer and much patience and shattering of glass (wear safety goggles). Clean it up really well, and you will also need to get some 3M double sided adhesive tape to stick the new one back on(really really thin strips). I would suggest assembling the phone and trying to see if the screen works before sticking it in place..
Let me know if you need any more advice.

colonel_lp said:
The digitizer and LCD are one, so yes you do take the risk of getting a cheap panel. There are many on ebay, i looked for one that had a similar code on the back to mine, which was a Sharp panel. I don't remember the code now...
The phone comes apart really easily, apart from the hardest part of getting the old screen off, (a real PITA). I used a hairdryer and much patience and shattering of glass (wear safety goggles). Clean it up really well, and you will also need to get some 3M double sided adhesive tape to stick the new one back on(really really thin strips). I would suggest assembling the phone and trying to see if the screen works before sticking it in place..
Let me know if you need any more advice.
Click to expand...
Click to collapse
The phone came apart easily as you said. I did need to buy the torx t5 screwdriver though, that was not a problem.
I'm at this point now, i guess it safe to.. try to get the old screen off? Any more advice before i start?
Just want to be sure i do everything right

NuriJ said:
The phone came apart easily as you said. I did need to buy the torx t5 screwdriver though, that was not a problem.
I'm at this point now, i guess it safe to.. try to get the old screen off? Any more advice before i start?
Just want to be sure i do everything right
Click to expand...
Click to collapse
Just take it really slowly and lots of repeated heat with a hairdryer, and something really thin to pry it off that wont damage the plastic parts.
Good Luck.

colonel_lp said:
Just take it really slowly and lots of repeated heat with a hairdryer, and something really thin to pry it off that wont damage the plastic parts.
Good Luck.
Click to expand...
Click to collapse
I got it off at last.. the screen is now completely unusable though.
I've looked for the adhesive tape and found two. When you say "really thin strips" do you mean 1mm or 3mm?

NuriJ said:
I got it off at last.. the screen is now completely unusable though.
I've looked for the adhesive tape and found two. When you say "really thin strips" do you mean 1mm or 3mm?
Click to expand...
Click to collapse
It depends on which part, you need different for different places. you can see what fits. I think i bought a sheet and cut pieces from it with a very sharp knife and put them in place. But strips will work also.

@NuriJ
Have you solve this? My dropped today and my upper part of screen became irresponsible.
Did you buy the new LCD and digitizer or only the digitizer? I thought, that in this phone it is only one part, but I saw some offers on ebay where were only digitizers.
Can you please tell where did you bought it?
Thanks

tulen_kobi said:
@NuriJ
Have you solve this? My dropped today and my upper part of screen became irresponsible.
Did you buy the new LCD and digitizer or only the digitizer? I thought, that in this phone it is only one part, but I saw some offers on ebay where were only digitizers.
Can you please tell where did you bought it?
Thanks
Click to expand...
Click to collapse
First do this - Take the phone apart, then disconnect the digitizer (you don't need to take the screen off to do this).
The digitizer has a small connector on it - Disconnect that too. Now reconnect both. Then power on your phone.
screen works > good for you
screen still dead > bad luck
I would highly recommend getting the LCD and digitizer in one. HOWEVER getting the screen + front cover is much easier as you don't need to take the old screen off and stick the new one back on (not that easy). And + you would only need to move the hardware.
FYI; If you have the 'sharp' type of display now, i recommend getting the 'sony' display (much better colors and contrast).
Sony displays have a somewhat similar code to this on the back: Z181FF0013

NuriJ said:
First do this - Take the phone apart, then disconnect the digitizer (you don't need to take the screen off to do this).
The digitizer has a small connector on it - Disconnect that too. Now reconnect both. Then power on your phone.
screen works > good for you
screen still dead > bad luck
I would highly recommend getting the LCD and digitizer in one. HOWEVER getting the screen + front cover is much easier as you don't need to take the old screen off and stick the new one back on (not that easy). And + you would only need to move the hardware.
FYI; If you have the 'sharp' type of display now, i recommend getting the 'sony' display (much better colors and contrast).
Sony displays have a somewhat similar code to this on the back: Z181FF0013
Click to expand...
Click to collapse
I have(had) the display from sony, this is why I was thinking about the digitizer only. So the display and the digitizer can split up? But I guess that I will need both parts because of the crack on the glass.
I can not find any offers where the code can be seen on the internet. But I will try to look closer.
Anyway, thanks for the tip with disconnecting and connecting the digitizer, I will definitely try it.
EDIT: Did you find any good disassembling guide?
EDIT2: Bad luck
This is the desired code? http://www.ebay.com/itm/For-Sony-Xp...e_Replacement_Parts_Tools&hash=item2c7cc7b012

tulen_kobi said:
I have(had) the display from sony, this is why I was thinking about the digitizer only. So the display and the digitizer can split up? But I guess that I will need both parts because of the crack on the glass.
I can not find any offers where the code can be seen on the internet. But I will try to look closer.
Anyway, thanks for the tip with disconnecting and connecting the digitizer, I will definitely try it.
EDIT: Did you find any good disassembling guide?
EDIT2: Bad luck
This is the desired code? http://www.ebay.com/itm/For-Sony-Xp...e_Replacement_Parts_Tools&hash=item2c7cc7b012
Click to expand...
Click to collapse
Yes, that's it. The display and digitizer can be split up, but i don't think i would mess with that..
Keep in mind that some uses pictures from sharp panels even though it's sony. Better ask for the code to be sure.
And also someone from another thread said that the phone most likely would not be waterproof after replacing the screen. . http://forum.xda-developers.com/showthread.php?t=2169802
There's most likely disassembling guides on youtube, have a look at them

****! Just dropped my new sony display, which I had been waiting for weeks
Opened the box, took it out of the plastic and after a few minutes - dropped it and the digitizer died.
I wonder how tf that happened. Totally unbelievable and i just bought the tape some days ago. Also i won't know if it broke during shipping or after i dropped it

NuriJ said:
****! Just dropped my new sony display, which I had been waiting for weeks
Opened the box, took it out of the plastic and after a few minutes - dropped it and the digitizer died.
I wonder how tf that happened. Totally unbelievable and i just bought the tape some days ago. Also i won't know if it broke during shipping or after i dropped it
Click to expand...
Click to collapse
Got no warranty / return shipment for replacement?
Sent from my SGP311 using XDA Premium 4 mobile app

[Q] Is this really Gorilla Glass 3?????!!!!!!!

oh guys...!!! i just put my guitar on the bed and the z1 was on the pillow ! the impact was totally nothing..less than one cm ... no doubt on that..
it was not a impact that makes the screen like it..
considering that there is no anti shatter film ( which there is one ! ) the gorilla glass 3 should break out this easy???!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And... the touch is not working .the screen goes crazy when i turn it on and the upper half isn't working at all...
check the pics

NiM72NiK said:
considering that there is no anti shatter film ( which there is one ! ) the gorilla glass 3 should break out this easy???!!!
And... the touch is not working .the screen goes crazy when i turn it on and the upper half isn't working at all...
check the pics
Click to expand...
Click to collapse
who said Z1 using gorilla glass 3 dude?
check THIS out !!
see under Protection: Shatter proof and scratch-resistant glass there's no one said Z1 using gorilla glass eve in worldwide
that doesn't mean that Z1's screen unbreakable! but just scratchless, hope this helpful for you.... next time see detail specs and consider carefully before bought something

Sony Xperia Z1 is using Dragontrail on the front and Gorilla glass on the back, that impact was just a bad luck

Man y'know, guitars r heavy (if it is electro)
Sent from my C6903 using XDA Premium 4 mobile app

MARKOZD15 said:
Sony Xperia Z1 is using Dragontrail on the front and Gorilla glass on the back, that impact was just a bad luck
Click to expand...
Click to collapse
thats exactly correct...that was a real bad luck!
dnzdeniz said:
Man y'know, guitars r heavy (if it is electro)
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
man! its not electro and i just put the bottom in the bed gently and the head just felt on the screen so much lightly ! the impact was noting at all!
bad luck ,...

NiM72NiK said:
thats exactly correct...that was a real bad luck!
man! its not electro and i just put the bottom in the bed gently and the head just felt on the screen so much lightly ! the impact was noting at all!
bad luck ,...
Click to expand...
Click to collapse
WTH? Our phone is that unprotected? I wasn't expecting that :/
Man, I wish your phone (and you) get better.

Z1 isn't hard to replace the screen. Did for mine with no issues. Check witrigs.com for instructions and all the needed parts.

dnzdeniz said:
WTH? Our phone is that unprotected? I wasn't expecting that :/
Man, I wish your phone (and you) get better.
Click to expand...
Click to collapse
i'm shocking because of that! i dont know. maybe there are some weak points or that was quite a bad bad bad luck
but i think a screen guard ( which i removed 3days ago) could protect it a little bit better.maybe It wouldn't break if the screen guard was installed.by the way , I was expecting the touch to stand working but now my z1 is useless totally! keeps yours safe and try using a front covered case.
Spectre51 said:
Z1 isn't hard to replace the screen. Did for mine with no issues. Check witrigs.com for instructions and all the needed parts.
Click to expand...
Click to collapse
man the problem is money ! in Iran these parts are totally expensive (about 250 US$) just for screen!which 1$ is 3000Tomans and i just earn 600,000Tomans each month
but thanks for noticing. I may one day try to replace it by my own!

It's just bad luck m8, I feel for you but the fact of the matter is the devices now cracked and it'd be impossible to convince Sony or your provider of how it happened and to get a sympathetic ear, looks to me like you'll have to either fix it yourself or claim on insurance.
Did you insure it? How old is it if not? You may be able to add insurance on from your provider, I know EE in the UK offer this service at any time.

It's actually Dragontrail glass. But both Gorilla and Dragontrail are NOT unbreakable: they are harder, so they are less likely to scratch, but that makes them more prone to break. Diamonds, for example, are the hardest material known; but they break/chip very easily. Our phones are like that, if there's a light impact on the wrong angle the screen will shatter easily.

ryandxter said:
who said Z1 using gorilla glass 3 dude?
check THIS out !!
see under Protection: Shatter proof and scratch-resistant glass there's no one said Z1 using gorilla glass eve in worldwide
that doesn't mean that Z1's screen unbreakable! but just scratchless, hope this helpful for you.... next time see detail specs and consider carefully before bought something
Click to expand...
Click to collapse
The Z1 scratches quite easily. My S4 remained pristine after over a year of use, so did my Galaxy Note. This scratched within a month and continues to get minor scratches over time.

I hear you with the scratches, i've had cases on my phone since day one and there are scratches on the back of the phone, it's never been without a case and i take very good care of my devices, the front and back now have Zagg shields on them so they're ok now but yea it does scratch very easily, especially the back.

Its breakable anyhow.
It's quite breakable as far as i noticed, and also scratcahble All tested and failed..
---------- Post added at 07:13 PM ---------- Previous post was at 06:47 PM ----------
By the way, the touch screen is too expensive like 200 euros..
It's realy looks like i gonna sell it out soon..

I was walking to my car today and dropped my phone...It landed flat on the screen. Picked it up and it had about 5 pretty bad scratches on it, but when I got home I took the stock screen protector off and it looks brand new now.
Sent from my C6916 using Tapatalk

Lancerz said:
I was walking to my car today and dropped my phone...It landed flat on the screen. Picked it up and it had about 5 pretty bad scratches on it, but when I got home I took the stock screen protector off and it looks brand new now.
Sent from my C6916 using Tapatalk
Click to expand...
Click to collapse
That can be only coincidence. Have you ever noticed or heard that it's getting scracthed while all protecters on ?
Wonder why they produce so expensive mobiles that breaks so easly... I think we are the lazy consumers who don't search enough

It's all about luck chaps, i've dropped a phone from the top of a cupboard which is around 9 feet up onto slate, one single dent nothing else and yet i've seen someone drop the same phone from less than 2 feet and the whole screen has smashed ? Not worth trying to figure out, once that phones in free fall it's simply a case of luck.
Oh i forgot, we also threw a 9320 blackberry down some stairs, concrete covered with lino, around 50 steps. Some bumps and bruises but no cracks

In my phone too

by the way since i dont have enough money to buy a new phone ( z1 or z2 or any other new phones) I decided to repair it :laugh: and planning for the z3 . beacuase in Iran there is no insurance for phones ( just for HTC ) and no warranty and even if I had the bootloader is unlocked so its voided . the only concern here is for replacement cares. most of repairers dont care enough so you will see the repair marks on body.
one question , the new lcd even the original one (which i want to use) has the same quality ? does it fit on body completely? the colors? every thing is the same?

I think so

LETV Le1 PRO (X800) broken screen replacement

I have LETV X800 US version. Drop from 1.5 cracked the glass really nice (see attachment). I am thinking to order screen replacement from here: http://www.vopmart.com/pa1013251.html or here: http://s.aliexpress.com/iemyi2Yz
Do you think it is compatible with my US version of the phone.
I guess it should work on both CN & US but I need to ask before ordering.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are some Chinese replacement videos (I will definitely make one also when I receive the part):
http://v.youku.com/v_show/id_XMTMyNjY1MjY4OA==.html?from=y1.2-1-105.3.1-2.1-1-1-0-0
http://v.youku.com/v_show/id_XMTMzMDM2NzEwOA==.html
http://v.youku.com/v_show/id_XMTMzMDM2NzEwOA==.html?from=s1.8-1-1.2
http://v.ku6.com/show/xxsPqDFQRIrHZl-0sZy8Ww...html?from=my

Any progress?

I also have the same problem.
Hi
Did you find a solution to your problem ? I also have the same and I do not find the necessary help.
Thank you for your answer

In my reading the screen replacement should work on both US and CN versions....

The screen of this phone is subpar to current phone standards. Mine cracked when dropped at 30 cm from tiled floor after 3 months of use! The phone was house into its original silicone transparent protection, with a glass protection on top! The glass protection didn't brake, only the screen underneath did. I had it replaced for the equivalent of 30 euros in China in a general phone fixing shop, and made clear I did not want an original replacement. They guy came up with a good quality screen, slightly thicker than the original. I have used it without problems for 8 months now. It withstood about 4 falls from 1 meter each, but I keep the phone housed in a metal frame protection since then. The original case is bad since it doesn't protect the phone all around as it should.

I bought the screen from vopmart.
Price is ok, delivery was fast (less than a week to Germany).
Disassembly of screen was actually easier than in the videos, works pretty well.
The BIG problem was (which I did not really realize or ignore until then)...the vopmart screen replacement did NOT come with the adhesive to glue the screen to the phone.
Since I was impatient and wanted to use the phone right away, I used some own tape and glue and damaged the screen in the process.
Bottom line:
- Screen replacement is relatively simple and screen is not too expensive
- make sure you double check that the adhesive is included in the screen you order or order separately, otherwise you will not be able to replace the screen
- I second what the previous poster said....my phone fell from about 70cm and the screen was cracked pretty badly, previous phones did survive this
I bought a Xiaomi phone now. I hope/think build quality is a bit better and, more importantly, you are not stuck with Android 5...

I'm planning to order screen on Aliexpress. I want to ask you that, is your screen's colors or quality worse than original? I'm not asking for durability, just asking for quality.

Jiroskop said:
I'm planning to order screen on Aliexpress. I want to ask you that, is your screen's colors or quality worse than original? I'm not asking for durability, just asking for quality.
Click to expand...
Click to collapse
I think it is about the same as the original. I am not 100% sure though since I destroyed it a little during the replacement. And I believe the color quality from the original one is not great to start with anyway.

nuukee said:
I think it is about the same as the original. I am not 100% sure though since I destroyed it a little during the replacement. And I believe the color quality from the original one is not great to start with anyway.
Click to expand...
Click to collapse
Thank you. I will check adhesive before order.
I saw some feedbacks about pressure marks, it's like
Do you have screen problem's like this?

Jiroskop said:
Do you have screen problem's like this?
Click to expand...
Click to collapse
No, this is ok with my screen.

Did anyone replace the digitiser and screen in one go and need glue for the job? Which type?

KarlDroid said:
Did anyone replace the digitiser and screen in one go and need glue for the job? Which type?
Click to expand...
Click to collapse
I didn't replace yet but searched on internet and found this:
https://tr.aliexpress.com/item/3pcs..._8&btsid=806ce06b-93bc-4eff-ada1-1fff3ee50057

Jiroskop said:
I didn't replace yet but searched on internet and found this:
https://tr.aliexpress.com/item/3pcs..._8&btsid=806ce06b-93bc-4eff-ada1-1fff3ee50057
Click to expand...
Click to collapse
I ordered the screen which comes with the digitiser and lcd screen but no sticker so I ordered the sticker, however some people in this thread said glue, so I am confused. What more the replacement videos don't show people putting in glue.
And originally did the phone have a sticker I think not?

KarlDroid said:
I ordered the screen which comes with the digitiser and lcd screen but no sticker so I ordered the sticker, however some people in this thread said glue, so I am confused. What more the replacement videos don't show people putting in glue.
And originally did the phone have a sticker I think not?
Click to expand...
Click to collapse
I don't know but probably phone have sticker originally, not glue or something like that.

Yes I meant this sticker.
Mine did come without so I had problems.

Replacement of screen
nuukee said:
Yes I meant this sticker.
Mine did come without so I had problems.
Click to expand...
Click to collapse
So I have ordered both and have the heat gun, and the pry tools, so technically if I am not a gimp I should be able to complete this successfully.
I am just again slightly confused because some videos recommend removing the back cover and the getting to the front by doing a full disassembly whilst others recommend removing the glass directly.
Has anyone tried both methods? I would understand if you were replacing the battery also but...
Thank you in advance.

I have only tried the "front" method, so just removed the glass from the front. I found this to be pretty easy. I did this with a Sony Xperia phone before and I must say the letv was much easier.
I can recommend removing the glass from the front.

Which one is the front method? What and where did you buy to repair it?

user2988 said:
Which one is the front method? What and where did you buy to repair it?
Click to expand...
Click to collapse
I think you use a heat gun to warm it up and then use a suction cup to loosen it then use a razor blade to cut away the glue/sticker and slowly pry it apart.
Then you detach it, attach the new one apply the sticker and then reseal.

Sticker
Hello everybody,
The son of my friend break his screen (LeTV one Pro = LeEco x800 Pro).
He bought a replacement screen, but there is no sticker to fix the screen. It's hard to find this part alone.
Can you give me an idea to solve this problem?
Regards.