Database Develop

Rooted with motochopper and cannot do firmware update

I've tried uninstalling superuser and all it has. I've tried like 5 times now the install for the new firmware update won't install i keep getting a android with the red exclamation sign and its front door open, then it boots in to android and says update failed. Help please!

Do I have to factory restore first or somthing? i really dont wanna have to cause i just got this phone from at&t as a referb for my old one that had battery issues and its not fun setting everything up over again lol
\

Hi buddy.
First of all, I don't entirely understand what are you trying to do. What to you mean with "firmware update"? Do you want to flash a new ROM?

mauchito said:
Hi buddy.
First of all, I don't entirely understand what are you trying to do. What to you mean with "firmware update"? Do you want to flash a new ROM?
Click to expand...
Click to collapse
At&t just pushed an ota firmware update that won't install stock ROM is on here only rooted

djshadowxm81 said:
At&t just pushed an ota firmware update that won't install stock ROM is on here only rooted
Click to expand...
Click to collapse
Got it. Check this thread: http://forum.xda-developers.com/showthread.php?t=2751263
You may find all the information you need there. Even if you can't, don't worry, is just a minor update, it is not Kitkat.

I've already been through that thread and haven't really found my solution to my issue. Any ideas?

djshadowxm81 said:
I've already been through that thread and haven't really found my solution to my issue. Any ideas?
Click to expand...
Click to collapse
Sadly no, my friend. Any reason in particular about why you want this specific update?
Let's hope somebody else in this forum can help you.

Are you running a stock recovery? Have you tried using Myth Tools to flash back to stock?

Its running stock rom from factory everything is factory right now

I kept getting the dead Android as well. We're you running a KK ROM on your phone before restoring to stock? I was running Validus and tried to use Myth Tools to flash a stock ATT 4.1.1 ROM which also failed to take the update. I then installed a 4.1.2 Bell stock ROM (my phone came from Bell) via Myth, let the phone boot, and then flashed a stock ATT ROM via Myth and it took the update.

audit13 said:
I kept getting the dead Android as well. We're you running a KK ROM on your phone before restoring to stock? I was running Validus and tried to use Myth Tools to flash a stock ATT 4.1.1 ROM which also failed to take the update. I then installed a 4.1.2 Bell stock ROM (my phone came from Bell) via Myth, let the phone boot, and then flashed a stock ATT ROM via Myth and it took the update.
Click to expand...
Click to collapse
I am on 4.1.1 from the factory. This is a referb phone from the factory like not even a week old yet. Boot loader isn't even unlocked. Its all stock and I'm getting dead android.

If you're getting the dead Android, it makes me believe that something may be wrong with the stock recovery. Some people were able to get the update to install using the latest Philz Touch recovery rather than stock recovery.
This might help from Skeevy: http://forum.xda-developers.com/showpost.php?p=52745043&postcount=7

[Q] AT&T (i537) active problem with unbricking help please!

Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.

nickeon1 said:
After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE.
Click to expand...
Click to collapse
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
nickeon1 said:
Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4 and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.

nickeon1 said:
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
When you flash back to stock, you can only flash a version that is equal to or greater than the version you were already on. So if you were originally on 4.4.2 you can only flash a 4.4.2 stock ROM, any other ROM will fail to flash.

thisisapoorusernamechoice said:
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
Click to expand...
Click to collapse
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?

nickeon1 said:
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
Click to expand...
Click to collapse
Yes, but make sure the phone doesn't reboot in between flashing the ROM and flashing the Masterpatch.

[Q] Can't Get Custom ROM to Flash on AT&T OA1 S5

I have a Samsung Galaxy S5 AT&T OA1 (G900A) and I cannot get the phone to take a custom rom flash. First I downgrade to NCE using ODIN 3.09, check install from unknown sources, then I install towelroot and successfully root the phone. Install SuperSU and update the binary, reboot, install Busybox. Shut down and go back into download mode and use ODIN to flash the OA1 kernel. I then install either flashfire or SafeStrap and then instruct them to wipe the phone other than internal memory and flash the rom zip. I have tried several roms and everytime I get back to the same thing... the default recovery screen with a dead android.
Any suggestions or ideas what I am doing wrong?

mnemonicj said:
I have a Samsung Galaxy S5 AT&T OA1 (G900A) and I cannot get the phone to take a custom rom flash. First I downgrade to NCE using ODIN 3.09, check install from unknown sources, then I install towelroot and successfully root the phone. Install SuperSU and update the binary, reboot, install Busybox. Shut down and go back into download mode and use ODIN to flash the OA1 kernel. I then install either flashfire or SafeStrap and then instruct them to wipe the phone other than internal memory and flash the rom zip. I have tried several roms and everytime I get back to the same thing... the default recovery screen with a dead android.
Any suggestions or ideas what I am doing wrong?
Click to expand...
Click to collapse
After downgrading to nce and rooting there is no need to update the kernel back to OA1 as all the kitkat roms are based off the nce build. Our you can root then upgrade to lollipop using this method
http://forum.xda-developers.com/showthread.php?t=3076803 as the devs for the s5 roms have moved to 5.0.

dirtydodge said:
After downgrading to nce and rooting there is no need to update the kernel back to OA1 as all the kitkat roms are based off the nce build. Our you can root then upgrade to lollipop using this method
http://forum.xda-developers.com/showthread.php?t=3076803 as the devs for the s5 roms have moved to 5.0.
Click to expand...
Click to collapse
I have tried to do the flash several times without going back to the OA1 kernel too, but I thought that may have been the issue. I figured out quickly it wasn't.
One thing I may have been missing is that I am trying to flash lollipop roms. Is that my problem? Do I need to be flashing a KitKat rom unless I flash the rom to linked to in your post? How do I get a lollipop rom flashed if that's the issue?

mnemonicj said:
I have tried to do the flash several times without going back to the OA1 kernel too, but I thought that may have been the issue. I figured out quickly it wasn't.
One thing I may have been missing is that I am trying to flash lollipop roms. Is that my problem? Do I need to be flashing a KitKat rom unless I flash the rom to linked to in your post? How do I get a lollipop rom flashed if that's the issue?
Click to expand...
Click to collapse
You can't flash lollipop roms unless your already on lollipop. You'll have to stick with kitkat roms unless you upgrade using the method in the link that i posted. Once you upgrade to lollipop using that method you'll be able to flash lollipop roms.

dirtydodge said:
You can't flash lollipop roms unless your already on lollipop. You'll have to stick with kitkat roms unless you upgrade using the method in the link that i posted. Once you upgrade to lollipop using that method you'll be able to flash lollipop roms.
Click to expand...
Click to collapse
Got it. Tried it out and finally was able to get a Lollipop custom rom to flash.
Thanks for your help!

mnemonicj said:
Got it. Tried it out and finally was able to get a Lollipop custom rom to flash.
Thanks for your help!
Click to expand...
Click to collapse
Good deal. Which one did you go with. I've ran alliance, twi5ted, and TMS 2.0. I personally like TMS best. Seems like it runs smother for me.

dirtydodge said:
Good deal. Which one did you go with. I've ran alliance, twi5ted, and TMS 2.0. I personally like TMS best. Seems like it runs smother for me.
Click to expand...
Click to collapse
I went with TMS 2.0, but I was hoping to get a Cyanogenmod based rom installed. I have tried several times to install the Fusion rom using FlashFire, but each time I get an unmount failed notice and have to go back to NCE.
What do you like about TMS?

mnemonicj said:
I went with TMS 2.0, but I was hoping to get a Cyanogenmod based rom installed. I have tried several times to install the Fusion rom using FlashFire, but each time I get an unmount failed notice and have to go back to NCE.
What do you like about TMS?
Click to expand...
Click to collapse
First off you can't flash cyanogenmod cause of the locked bootloader. We have to stick with TW base roms. I like the stability about TMS2.0 plus the fact that the dev is still working on it. Most all the other devs have went to other phones. TalkingMonkeys is a great dev and is constantly working on mods and features.

(Q) I527 stuck in Download

(RESOLVED)
Alright so in order to not bore you all, ill get to the point. I messed up trying to do impossible things with my I537 because I didn't read any forums before trying... stupid I know. That being said I now have a "soft bricked" phone stuck in download mode. I have been looking around (I assume not hard enough) for the right file to flash with ODIN to get me back up and running so I can actually do my research this time before playing with different stock roms.
Can anyone point me in the right direction to get the right files to unbrick this thing?

First things first: this forum is for the SGH-I537 AT&T Galaxy S4 Active, not the I527 Galaxy Mega. I just want to make sure you have the right device. If you have the Mega (I527), you want this forum, and ignore the rest of this post.
If you do in fact have the Galaxy S4 Active (I537), then check out this thread, it has all the official firmware files that have been released for this device. I would recommend using the firmware files for NE3 (KitKat) to flash in Odin. The NE3 build is the easiest to root, and you can always use the keep-root method to upgrade to lollipop if you so desire.

Oh yes sorry that was a mistype. I did indeed mean to type I537. Ok Ill give this a shot and update on how it goes.

Ok so Im currently downloading the Full Odin package, but I have already rooted the phone with towelroot. Is that going to be an issue?

Nah it won't be a problem. Flashing firmware files with Odin will unroot your phone (it resets everything to original factory settings). You can always reroot with towel root again

Ok new problem though, I was able to get everything flashed through ODIN, it restarts; then I get the Samsung boot screen, att boot screen and then it just goes black. I put it back into download mode and tried to re-flash it a couple times but it keeps doing the same thing. Thoughts? This Is the section I got the file from;
I537UCUCNE3 (4.4.2) Released 2014-06-06 - OFFICIAL

Issue has been solved, I just had a battery issue but after changing that and letting the phone charge up it started up great. Thanks for all your help "thisisapoorusernamechoice"

Odin flash auto-reverts after rebooting

Hi guys, i have an s4 active i9295 with a bootloop, so i decided to flash stock rom via odin as i always did with samsung phones with this problem but every time i flash a rom (i tried different ones) the phone restarts as normal but when the samsung logo appears then it says on the top left with blue letters revocery booting, then it does something with a progress bar and an android logo above and restarts. When it boots again its back at the bootloop, im an absolute noob in this but what i understand is happening is that the phone is reverting the flash i did with odin and i want to know what am i doing wrong, is this supposed to happen? Any help will be much appreciated

Hello,
Welcome to XDA.
To better assist you, your thread will be moved to your device Q&A forum linked below.
http://forum.xda-developers.com/galaxy-s4-active/help
The experts there may be able to help. Good luck.

I need help, its quite an expensive phone to just give up and throw it away
nexware said:
Hi guys, i have an s4 active i9295 with a bootloop, so i decided to flash stock rom via odin as i always did with samsung phones with this problem but every time i flash a rom (i tried different ones) the phone restarts as normal but when the samsung logo appears then it says on the top left with blue letters revocery booting, then it does something with a progress bar and an android logo above and restarts. When it boots again its back at the bootloop, im an absolute noob in this but what i understand is happening is that the phone is reverting the flash i did with odin and i want to know what am i doing wrong, is this supposed to happen? Any help will be much appreciated
Click to expand...
Click to collapse
C'mon guys you may know what is going on with my s4, no matter what i do it bootloops, tried everithing
pit + firmware on odin, still bootloops, wipe data/cache after and before flashing, still bootloops, i researched a lot and tried almost everithing with the same result, please help me, i'll personally bake a cake to the first nice guy to help me get out of the bootloop

nexware said:
C'mon guys you may know what is going on with my s4, no matter what i do it bootloops, tried everithing
pit + firmware on odin, still bootloops, wipe data/cache after and before flashing, still bootloops, i researched a lot and tried almost everithing with the same result, please help me, i'll personally bake a cake to the first nice guy to help me get out of the bootloop
Click to expand...
Click to collapse
I'll try to help you, what did you install or modify that caused the bootloop in the first place? Was your device rooted? Did you have custom recovery? What recovery? Did you have a custom ROM? What ROM?

Droidriven said:
I'll try to help you, what did you install or modify that caused the bootloop in the first place? Was your device rooted? Did you have custom recovery? What recovery? Did you have a custom ROM? What ROM?
Click to expand...
Click to collapse
I received the phone as it is with the bootloop, don't know much of its state before but i was told that it was a bad flashing procedure the cause of the problem. It had stock recoverys from the different roms i flashed in odin: I9295XXUDOB4
I9295XXUCNE5
I9295VJUDOF1
There was one time i managed to make it boot flashing CWM and installing cyanogenmod 12.1 but on restart it kept bootlooping again and i was unable to get it to boot again even repeating exactly the same steps i did before.
I want to make an absolute clean firmware flash with the original rom that this phone came in my country (VJUBMK4) but from what i understand once im on newer versions (im not sure if 4.3 or 5.0) i cant downgrade.
I really don't know what is it causing the bootloop, how can i get the pone to factory firmware? Am i doing something wrong?

nexware said:
I received the phone as it is with the bootloop, don't know much of its state before but i was told that it was a bad flashing procedure the cause of the problem. It had stock recoverys from the different roms i flashed in odin: I9295XXUDOB4
I9295XXUCNE5
I9295VJUDOF1
There was one time i managed to make it boot flashing CWM and installing cyanogenmod 12.1 but on restart it kept bootlooping again and i was unable to get it to boot again even repeating exactly the same steps i did before.
I want to make an absolute clean firmware flash with the original rom that this phone came in my country (VJUBMK4) but from what i understand once im on newer versions (im not sure if 4.3 or 5.0) i cant downgrade.
I really don't know what is it causing the bootloop, how can i get the pone to factory firmware? Am i doing something wrong?
Click to expand...
Click to collapse
Ah, it sounds like you have one of the devices with locked bootloaders then if you can't downgrade, if that is the case you can't use CWM, TWRP, CM or AOSP custom ROMs, those devices have to use Safestrap and modified Stock ROMs. Or you may can unlock the bootloader. I'm not sure that is your problem but you can check it out.
You can flash the newest stock firmware and just be done with it, you may not be able to root and flash custom but the device will at least work.
Sent from my SCH-I535 using Tapatalk

Droidriven said:
Ah, it sounds like you have one of the devices with locked bootloaders then if you can't downgrade, if that is the case you can't use CWM, TWRP, CM or AOSP custom ROMs, those devices have to use Safestrap and modified Stock ROMs. Or you may can unlock the bootloader. I'm not sure that is your problem but you can check it out.
You can flash the newest stock firmware and just be done with it, you may not be able to root and flash custom but the device will at least work.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?

nexware said:
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?
Click to expand...
Click to collapse
Boot into download mode by holding the volume down + power button and see what is the device name listed there

nexware said:
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?
Click to expand...
Click to collapse
Take the cover off and pull the battery, the label under the battery should have the model number for the phone.
If the model is GT-i9295, then you have an unlocked bootloader and should be able to flash any firmware.
If the model is SGH-i537, then you have a locked bootloader and can only flash firmware meant for that phone.
Once we know which phone you have we can help you.

JASONRR said:
Boot into download mode by holding the volume down + power button and see what is the device name listed there
Click to expand...
Click to collapse
It says this:
PRODUCT NAME: GT-I9295
CURRENT BINARY: Custom
SYSTEM STATUS: Official
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: ENABLE
eMMC BURST MODE enabled

Devo7v said:
Take the cover off and pull the battery, the label under the battery should have the model number for the phone.
If the model is GT-i9295, then you have an unlocked bootloader and should be able to flash any firmware.
If the model is SGH-i537, then you have a locked bootloader and can only flash firmware meant for that phone.
Once we know which phone you have we can help you.
Click to expand...
Click to collapse
Its GT-i9295

Can you flash VJUCNI1 or VJUDOF1?