Database Develop

i9305 stuck on rom booting screen after flash

Was flashing my friends i9305 and now it wont boot any rom I flash... always gets stuck on the first boot screen until I take out battery.
I flashed CWM 6.0.4.7 using odin.
I have tried flashing several roms (CM 11, CM 10.1, PACman 4.3)... Each one will flash with no errors, then when I reboot after correct GAPPS it just gets stuck on the loading screen forever and won't boot up into ROM.
Wipe data/cache, wipe dalvik, wipe system > Install rom from zip, install GAPPS from zip > reboot (even here I wipe system/data/cache - still doesnt work).
Any ideas on why it won't load up the roms....

only4dank said:
Was flashing my friends i9305 and now it wont boot any rom I flash... always gets stuck on the first boot screen until I take out battery.
I flashed CWM 6.0.4.7 using odin.
I have tried flashing several roms (CM 11, CM 10.1, PACman 4.3)... Each one will flash with no errors, then when I reboot after correct GAPPS it just gets stuck on the loading screen forever and won't boot up into ROM.
Wipe data/cache, wipe dalvik, wipe system > Install rom from zip, install GAPPS from zip > reboot (even here I wipe system/data/cache - still doesnt work).
Any ideas on why it won't load up the roms....
Click to expand...
Click to collapse
I have same problem here.. no one help me... I dont know I was in i9000 thread and lot of time I got answers.. miss that thread so much .

1Ishara said:
I have same problem here.. no one help me... I dont know I was in i9000 thread and lot of time I got answers.. miss that thread so much .
Click to expand...
Click to collapse
Well I figured it out... since it was never flashed or anything before (from stock rom)... I just went into the Mounts and Storage menu, and formated /cache /system /data manually and it finally worked.
Hope that helps

I tried to flash multiple lollipop roms but they all failed to flash except titanrom

My TWRP version is 2.8.4 and i tried to flash cm roms but they either fail or can't stream videos. Help pls I will provide any information about my phone. Right now I'm running titanrom 5.0.2 on my phone and it works fine but I wanna upgrade to 5.1.

SHINee2 said:
My TWRP version is 2.8.4 and i tried to flash cm roms but they either fail or can't stream videos. Help pls I will provide any information about my phone. Right now I'm running titanrom 5.0.2 on my phone and it works fine but I wanna upgrade to 5.1.
Click to expand...
Click to collapse
I will give u a step by step procedure
1. Update you're twrp
2. Download the official cm 12.1 nightly
3. Copy the nightly zip to you're external SD card
4. One main thing u should update you're boot loader as you're saying that you are on stock moto 5.0.2 then your boot loader should be up to date
5. Now make a back up of current ROM
6. Wipe internal , external , dalvik cache , cache
7. Now flash the ROM and gapps and gapps I suggest u to use cm gapps
8. Wipe dalvik cache , cache
9. Reboot your device
If u face any issue after following this procedure also then you re boot to recovery and wipe both the caches
Sent from my Moto G 2014 using XDA Free mobile app

[Q] Please help i messed up a s3 mini!

Hi there guys please help me out, i was trying to update a friend's s3 mini. I dowloaded cm 12.1 and some gapps he already had twrp 2.4.3.0, so i delete eerthing (factory reset) and delete cache and davlik cache, well , when i tried to install cm 12.1 says error flashing, i don't remember very well, but anyways now the cellphone is in a bootloop and i don't know what to do. i have some questions.
¿i have to update the trwp in order to install cm 12.1?
¿if i have to update the twrp how i do it if the cellphone is in a bootloop?
The cellphone start always in trwp so think is not dead. at least yet.

xrafael95x said:
¿i have to update the trwp in order to install cm 12.1?
Click to expand...
Click to collapse
yes you must update the twrp
download this http://get.novafusion.pl/?id=1374 and put it on an extSdCard
now booting into revocery and flash the update of the twrp after this click on reboot and select reboot recovery.now you should flash cm12.1

thank u i already solved all this problem, i'm gonna download cm 12.1 and install it with odin, but now i'm thinking in download the twrp in tar.md5 and install the cm 12.1 which i have it the cellphone becase i try to update and says error flashing, but anyways thanks

Problems with TWRP/CyanogenMod 12.1 - Motorola MotoG 2nd Gen XT1068

Hello guys! How are you?
I'm having some bugs with CyanogenMod 12.1 in my MotoG and haven't found nothing that could help me with my problem.
Well, here's the story:
My device had Android KitKat 4.4 as the stock rom and I updated it to Lollipop 5.0 before rooting.
Well, I unlocked the bootloader and used TWRP as a custom recovery and installed SuperSU.
I've been using the phone about almost 8 months after rooting and then, Motorola released an update, I tried to update it via OTA and, of course, it didn't worked since TWRP can't OTA. Nothing changed in my phone, I simply rebooted it and it worked but since a few days some apps started to suddenly close and/or stop.
I decided to install CyanogenMod 12.1, downloaded the latest nightly and a stock package of GApps and flashed them via TWRP.
Wiped Dalvik Cache, Data, Cache and System
At the first attempt, TWRP rebooted after flashing CM12.1 and I wiped the caches via WIPE menu before flashing GApps wich couldn't be installed because there was "no space in storage". Well, I booted my phone normally (running cm12) and downloaded a Micro GApps package and flashed it sucessfully.
Problem is: Clock stops working (it has stopped for now), I can't install some apps from PlayStore such as Facebook, etc and my phone appears to be unrooted.
I think my TWRP is bugged or something cause it does not works as tutorials, etc tells...It shows some errors and sometimes reboots itself after flashing some file.
Do you guys think I should reset everything and then redo all the steps to use CyanogenMod properly? I really liked this custom rom but I'm afraid there will be more bugs in the future....

Anyone?

my solution..
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.

sagar846 said:
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
Click to expand...
Click to collapse
This is exactly what you should do.
There are several things that don't work as they supposed to do, so follow the steps @sagar846 mentioned.
Sent from somewhere

Oniganon said:
Anyone?
Click to expand...
Click to collapse
cm 12 and 12.1 have some little bugs still but it is useable for daily use

Marshmallow update

Anybody able to update their oneplus to stable version of marshmallow that just got released. I am having few troubles doing it

Downloading.....

Cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QB-bacon.zip (329.14 MB)
Downloaded and flashed , no issues till now. Gapps used = slim zero gapps 6.0.

COS13 will come in a week or two

help
drmuruga said:
Cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QB-bacon.zip (329.14 MB)
Downloaded and flashed , no issues till now. Gapps used = slim zero gapps 6.0.
Click to expand...
Click to collapse
can you tell how you flashed it . I tried to do it but got error message

Cos13 is better power and performance
Sent from my A0001 using Tapatalk

try it with twrp 2.8.6.0
Hope u got the error 7 ?
if it was then this can solve ur problem
all the very best mate

Twrp 3.0.0
Clean flash
Slim_zero_gapps.BETA.6.0.build.0.x-20160121-1447.zip
Wipe cache/dalwik
Reboot.
Thats all

Guys, from what I read in the op, I get the feeling that he is confusing the recent CM13 snapshot with CyanogenOS13.
@kaskoraja
What rom is on your device right now?

Can you update from oneplus official signed CM12s to CM13-SNAPSHOT without data wipe??

drmuruga said:
Twrp 3.0.0
Clean flash
Slim_zero_gapps.BETA.6.0.build.0.x-20160121-1447.zip
Wipe cache/dalwik
Reboot.
Thats all
Click to expand...
Click to collapse
I want to update instead of starting from scratch. I tried with snapshot and CWM recovery and I couldnt do it by both ways

I tried stock version with cm recovery and update via ota then install through cm recovery but not able to flash gapps which was not present in ota , then flash twrp recovery and flash gapps via twrp shown more fc , so I reflash everything now no problem till now

drmuruga said:
Cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QB-bacon.zip (329.14 MB)
Downloaded and flashed , no issues till now. Gapps used = slim zero gapps 6.0.
Click to expand...
Click to collapse
How do I flash this? Thru Cyanogen recovery? thru TWRP? If thru TWRP, which version?

I flash through twrp 3.0.0 recovery.there is no gapps in update, when I first flash through cm recovery , I need twrp to flash gapps but that lead to many fc . so I flash through twrp clean flash of ROM, gapps through twrp 3.0.0 official recovery

COS13 is on the way. "That said, you'll find that 13 runs amazing on the OPO thanks to both improvements in M and also the low level stuff we improved this time around. COS13 for the OPO is in final QA+cert so it won't be much longer (a few days we hope)."
Source (read comments): https://plus.google.com/+SteveKondik/posts/RNMSi2t33yN

Why this is in Themes and Apps?

SirSoviet said:
Why this is in Themes and Apps?
Click to expand...
Click to collapse
Because noobs and weed...