Hello friends i need some urgent help! I accidentally deleted system/app folder on my Samsung S Advance I9070. After deleting it my phone rebooted automatically but stuck at Samsung logo. Then I flashed stock firmware via ODIN but the problem still persists. I can't even boot into stock recovery now . I dont even have any backup of my system.
Somebody please help i would be very grateful to you.
Thanks in advance
Rajatk95 said:
Hello friends i need some urgent help! I accidentally deleted system/app folder on my Samsung S Advance I9070. After deleting it my phone rebooted automatically but stuck at Samsung logo. Then I flashed stock firmware via ODIN but the problem still persists. I can't even boot into stock recovery now . I dont even have any backup of my system.
Somebody please help i would be very grateful to you.
Thanks in advance
Click to expand...
Click to collapse
Try to flash stock again. You should be able to get in download mode, but i don't understand why you can't enter recovery if you flashed the correct stock firmware.
Force said:
Try to flash stock again. You should be able to get in download mode, but i don't understand why you can't enter recovery if you flashed the correct stock firmware.
Click to expand...
Click to collapse
Thankyou Sir for replying. I have flased Stock Rom twice but still i cannot get into recovery nor my phone boots, it stuck at Samsung logo every time i boot. I have downloaded correct firmware from samsmobile. Please suggest me any other way to make it functional again.
Rajatk95 said:
Thankyou Sir for replying. I have flased Stock Rom twice but still i cannot get into recovery nor my phone boots, it stuck at Samsung logo every time i boot. I have downloaded correct firmware from samsmobile. Please suggest me any other way to make it functional again.
Click to expand...
Click to collapse
1)When you flashed stock firmware, did you put the firmware under "PDA"?
2) You flashed stock jb over stock jb for example?
Force said:
1)When you flashed stock firmware, did you put the firmware under "PDA"?
2) You flashed stock jb over stock jb for example?
Click to expand...
Click to collapse
Yes I flashed it under PDA and only Auto Reboot and F.Reset Time check box were checked.
Rajatk95 said:
Yes I flashed it under PDA and only Auto Reboot and F.Reset Time check box were checked.
Click to expand...
Click to collapse
Your power button and volume button is working properly?
Did you try to take off battery for few mins and then flash again?
I'm out of ideas...
@shut_down : I summon you Can you help this guy? Any idea?
Force said:
Your power button and volume button is working properly?
Did you try to take off battery for few mins and then flash again?
I'm out of ideas...
@shut_down : I summon you Can you help this guy? Any idea?
Click to expand...
Click to collapse
I tried out every thing but problem is same.
Related
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Which phone do you have? Can you go into recovery/download mode?
my phone is samsung galaxy s plus and yes i CAN go into recovery mode
Donovan662 said:
Which phone do you have? Can you go into recovery/download mode?
Click to expand...
Click to collapse
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Habescha said:
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Click to expand...
Click to collapse
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
thx i will try it but can you tell me where i went wrong? is it because i didnt delete kies on my windowspc? or anything special bec i would like to have ics on my phone...do you recommend cm9 instead of 10 because it didnt worked on my sgsplus or do you recommend me to try again...carefully of course ?
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
how can i find out my right firmware for my phone? or is it not important which i download?
Habescha said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Click to expand...
Click to collapse
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
thx though zou helped me a lot...now cm9 is working fine on my sgs plus...does cm10 works too im wondering bec i tried and it stocked after rebooting it
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
no i did all the steps wiping and deleting the data im pretty sure...cm9 is as i already said working fine....do you recommend to try to flash cm10 again on my phone bec im afraid to brick my phone...used the one of the xdaforum 2012-11-22: CM10 alpha4
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
educk said:
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Habescha said:
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Click to expand...
Click to collapse
I'm glad you managed to make it work.
educk said:
I'm glad you managed to make it work.
Click to expand...
Click to collapse
THX but ONE QUESTION?! does cm10 alpha 5 works without any problems? i mean can you go into youre mobile internet when youre outside? bec my phone with alpha 5 cm10 by ivendor does not work....:s i decided to flash the older alpha 4 until i found out the reason why it doesnt function...any guesses? =)
OK FOUND THE FIX ZIP ALREADY O XDA DDDDDD
ONE LAST THING : the vibration of the back and menu button is for me to hard....i found out that on my sgs plzs cm10 alpha 5 in settings-advanced there is NO VIBRATION setting in there, on my friends one there were several more options to choose!
is it maybe bec i flashed my phone with an older cwmrecovery?i think its 5.0 blabla...do i have to flash it again with the newer once 6.blabla?
thank you GUYS for youre quick help
help.....my xperia miro stuck at black screen after sony logo came out
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
AndrewLian said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
Do you have a Sony? Post then better in the threads for your phone.
This is section for Samsung Galaxy S
tetakpatalked from N7100
cm 10.2.1.3 installation failed
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
chinarredij said:
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
Click to expand...
Click to collapse
You have posted in wrong thread here.
tetakpatalked from 1+One
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
This is for S plus but it shall work for you too: http://forum.xda-developers.com/showthread.php?t=1660596.
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
You Must Install Stock ROM ( 3 Files ) and when you install 3 files ROM , Every things Should be Ok.
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
Hey there,
Did you flash an ICS/JB rom first before trying to return to stock?
If you did, no worries, it can be easily fixed
I think what you're missing is a file called dbsdata.rfs.tar (I'm not quite sure where to find a link, will update if I see it)
Pretty much the data partition in ICS onwards is different to that of GB, and so therefore it'll cause your phone to bootloop if you have the incorrect data partition.
Download dbsdata.rfs.tar from somewhere and flash it in download mode through Odin.
Try that and please report back
(By the way, don't panic if it bootloops after installing a custom rom. Just take out the battery, go back into recovery and flash again.)
Sent from my GT-I9000
I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.
digitz_ said:
I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.
Click to expand...
Click to collapse
connect your phone to the computer
go into donwload mode
start odin
flash http://www.hotfile.com/dl/176669754/95e7a92/S6500DXXLD3_S6500DPROLD1_PRO.zip.html
RoSinner said:
connect your phone to the computer
go into donwload mode
start odin
flash
Click to expand...
Click to collapse
Nope, still same thing.
digitz_ said:
Nope, still same thing.
Click to expand...
Click to collapse
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong
RoSinner said:
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong
Click to expand...
Click to collapse
What can I do wrong? I putted MD5 in PDA and flashed.
I tried to flash CWM and diffirent firmwares but no luck.
digitz_ said:
What can I do wrong? I putted MD5 in PDA and flashed.
Click to expand...
Click to collapse
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I was flashing before like this, everything was fine. There must be a way to fix this.
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
nah we can flash one package with pda
How did you fix it?
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?
Here: http://forum.xda-developers.com/showthread.php?t=1853159
bro .. use odin
first switch to download mode then connect ur mob with pc , then use odin and update it with original pda ..
digitz_ said:
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
How did you do it, I cannot install adb drivers for some reason, I went back from CM10.1 to stock but now it just keeps repeating boot animation. Please help.
tom1890 said:
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?
Click to expand...
Click to collapse
Hi, I had exactly the same problem, flashed the stock firmwire but it gets stuck on samsung logo, flashed few CWMs but nothing. I really didn't know what to do, then my battery became critical so i connected it to the pc and let it charge. While charging, I tried to acces the CWM recovery (home+volume up+volume down + power) and BAM! It opened recovery, I deleted all user data, cache and factory reset, rebooted and it worked.
Try to flash stock rom
Flashing stock rom didn't work.
Sent from my GT-S6500D using Tapatalk 2
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
how did you fix this? i have exactly the same issue.
polys643 said:
how did you fix this? i have exactly the same issue.
Click to expand...
Click to collapse
Hi All,
I was struggle with bootloop issue for 3 days. I got my problem when I forgot to wipe phone returning ROM 10.2 to stock rom. Before I didn’t have any problems with getting to recovery mode but after I was not able to get to CWM. Also did try (vol+) (vol-) (home) hold while odin reset all I get RUMDAMP ARM9. Same when trying to hold recovery combination while normal boot. I have no problems with getting to Download mode.
Phone show Samsung animation and then vibrate once, pause, vibrate twice.
What work for me.
Recovery Combination = (vol+) + (vol-) + (home) + (pwr)
1. With odin 3.04 (don know if version matters I hade SS_DL.dll in same folder as odin) I install cwm-6.0.3.3-b2-jena.tar.md5
2. It restarted and get boot loop again
3. When I hold recovery combination phone didn’t boot. But what did I remove battery plug it again. Press (pwr) and immediately (maybe 0.5 sec) I hold rest of the recovery combination. Phone boot and show me logo so I release the buttons. To my surprise I did boot to CWM. (don’t know way but I didn’t do wipe immediately but I restart did try it again to be sure if this works – and it did, at least for me)
Rest was easy (WIPE Factory Reset, Cache, Dalvik Cache and just in case fix permission) restart and did boot to Stock ROM. For some unknown reason now I can normally CWM just buy holding combination and releasing as soon as Samsung logo show up.
I hope this will help somebody.
Now im using CM 10.1 07/07
My phone is S6500D no NFC
Cheers,
Maciej
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
pleeees tell me how u fix it my phone hase the same proplem u had can u
Hello today i downloaded application called Anim Mod and then i installed it and then i opened the Anim Mod application and pressed Blur button then it downloaded something and then i had to boot my phone. wel i did boot but its now stuck in this samsung logo screen. my phone was rooted
i didnt know what to do so i just went to recovery mode and set it to factory settings and booted and its still stuck on this samsung logo...
what rom are you on ?
Im not sure :/ i have only rooted my galaxy note nothing else but if it helps its running 4.0.4 ICS
so your recovery: was that the CWM or stock recovery ? If it is recovery 3e.. stop doing a factory reset.
download http://www.mediafire.com/download.php?3cnf2ax9apsebef and place it on external SD. then boot into recovery and choose apply update from ext storage
choose the zip you downloaded and flash it.
once done. power off and boot into recovery again
then do a factory reset, wipe cache, advanced> wipe dalvik cache. then reboot
Ummm i did flash that thing and i wiped data :/ i did all what you told me and its still stuck
Ok then boot into download mode and flash a stock rom using pc odin. This will take you to factory form. Start from there.
nokiamodeln91 said:
Ok then boot into download mode and flash a stock rom using pc odin. This will take you to factory form. Start from there.
Click to expand...
Click to collapse
Can you give me some kind of tutorial link? or something im new doing this
http://forum.xda-developers.com/showthread.php?t=1424997
nokiamodeln91 said:
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
¨¨
what stock rom i could pick? i live in finland
You could choose any. Germany for instance.
nokiamodeln91 said:
You could choose any. Germany for instance.
Click to expand...
Click to collapse
Okay one question. Can i totally **** up my phone doing this? bricking it?
Tomza2211 said:
Okay one question. Can i totally **** up my phone doing this? bricking it?
Click to expand...
Click to collapse
If not done correctly. Do not perform any kind of wipe on stock ics kernels. Install philz kernel for wipes. Otherwise this method is considered pretty safe.
nokiamodeln91 said:
If not done correctly. Do not perform any kind of wipe on stock ics kernels. Install philz kernel for wipes. Otherwise this method is considered pretty safe.
Click to expand...
Click to collapse
How long this will take to put this stock rom? it has been installing it now for 10 min
6 mins approx. Where is it in the Odin? Stuck somewhere? Is the bar progressing in odin and on the phone?
nokiamodeln91 said:
6 mins approx. Where is it in the Odin? Stuck somewhere? Is the bar progressing in odin and on the phone?
Click to expand...
Click to collapse
no, there is no any bars at all :/ my phone shows me android robot and Downloading... Do not turn off target !! and odin shows some messages nothing about that its done or it have failed
Umm now i got error (Can't open the serial(COM) port)
You need to have Samsung uab drivers installed. Install kies first. That will install the required drivers. Them close kies and use odin again.
nokiamodeln91 said:
You need to have Samsung uab drivers installed. Install kies first. That will install the required drivers. Them close kies and use odin again.
Click to expand...
Click to collapse
i have done that but might this be the problem? i download 4.0.3 stock rom :/ my phone was on 4.0.4
That does not matter. You can install even 2.3.6
nokiamodeln91 said:
That does not matter. You can install even 2.3.6
Click to expand...
Click to collapse
Well... what could i do? omg my phone is fcked
I need some serius help now! plz guys i dont wanna lose my brand new phone
had the same problem, fix it restoring a previous rom
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
http://theunlockr.com/2012/10/22/how-to-root-the-samsung-galaxy-s-i9000-cf-kernel-method/
Click to expand...
Click to collapse
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Hello!
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Don't worry, it is just a digestion problem (bootloop). CF-root doesn't work with every firmware. If yours wasn't compatible, bootloop is normal reaction. Check my last thread and there you can find step-by-by step guide how to unbrick it.
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Here you go!!!
Don't worry. It is just a little thing.
Read my post here in the below given link. The solution is given in easiest steps.
forum.xda-developers.com/showthread.php?p=47034690#post47034690
Thank you so much guys it's working now, (even though I put the original one)!
I'll try to root it again asap!
tetakpatak said:
If yours wasn't compatible, bootloop is normal reaction.
Click to expand...
Click to collapse
How do I know if it's compatible or not? What should I check?
_Flasher_ said:
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
Click to expand...
Click to collapse
Sorry for the late reply: anyway no, the only thing I could do was watch the phone reboot and reboot and reboot and reboot and, finally, reboot
Thank you again!
BeNdErR said:
Thank you so much guys it's working now.
How do I know if it's compatible or not? What should I check?
Click to expand...
Click to collapse
Great, mate- I'm glad it works again
CF-Root is made AMAIK for Gingerbread ROMs only, and if you have Froyo it is enough to flash SpeedMod root kernel that already features CWM recovery, Busybox and SU. You should always ready very carefully the first posts of the files you flash, so you will void many potential problems.
If you did it after my unbrick guide thread, backup your IMEI No as soon as you root your phone (described how to)
Just click "thanks" button beyond posts which were useful for you, it is our way to express it on this forum (and many us here are visiting the forum to help each other)
GT-I9000 blackout, can only go to download mode after Odin
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
jaysonuao said:
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
Click to expand...
Click to collapse
Which Odin version did you use and what exacactly did you try to flash? Which system / Android version is installed om the phone?
tetakpatalked from N7100