I have a HTC Hero from Cellular South, which uses CDMA. All the info & faqs I find are all based on Sprint CDMA Heroes. Am I just SOL?
Thanks
cautioninc said:
I have a HTC Hero from Cellular South, which uses CDMA. All the info & faqs I find are all based on Sprint CDMA Heroes. Am I just SOL?
Thanks
Click to expand...
Click to collapse
Keep looking. There are at least a couple Cellular South threads in the Development forum. Check there (try using the Search function in that section if you haven't already), as I believe there is both a rooting method and a custom ROM for CSouth out there.
Thanks! I wasn't sure where to look. I ended up searching for just "south" and found what I was looking for. For some reason when I threw "cellular south" in there it found too much static
I have flashed the uro rom of the galaxy tab on a us sgh-1987 att samsung tab , i inserted my at&t sim card and it will not allow me to make calls . Can some point me in the right direction to fix this. The at&t sim card i am using has voice and data. Or have i not done something properly.
You need to be using a different modem than the one included in the Euro rom. I believe either the Bell Canada or Rogers modems should work to enable voice on ATT. I'm using the Euro JMI rom with the Bell JK5 modem and it works fine for me.
See here: http://forum.xda-developers.com/showthread.php?t=847273
I followed the instructions and for some odd reason the sim that came with my samsung is the only one that will work even though my phone is unlocked and i am using another att sim card that has voice and data.
And when i go to check wireless settings it keeps me me in flight mode.
Using JMIv2 here. Just made a call -- seems fine.
I full flashed JMIv2 over top of JMEv4.
Your not doing something correct.
Also please post in the correct subforum. This in no way has anything to do with android development. This belongs in general. Read much??
Sent from my MoDaCo powered Galaxy Tab.
Pls change the title of your post. It's completely baseless, and it's obvious you did something wrong. Thanks!
mistadman said:
Pls change the title of your post. It's completely baseless, and it's obvious you did something wrong. Thanks!
Click to expand...
Click to collapse
How so? Its clearly a question, he has a question mark after the million exclamation marks...
Sent from zombie infested Gingerbread.
rushstatus1 said:
I have flashed the uro rom of the galaxy tab on a us sgh-1987 att samsung tab , i inserted my at&t sim card and it will not allow me to make calls . Can some point me in the right direction to fix this. The at&t sim card i am using has voice and data. Or have i not done something properly.
Click to expand...
Click to collapse
Weren't you on other threads contradicting people about 3g+ voice using service menus?
I am confused about your setup - what model tab? I thought you had t-mobile tab.
Anyway, on an at&t tab use the bell i9000 modem. Check your apn and network mode afteryou reboot.
The iemi blocking by t-mobile stops people from using data.
And besides clubtech does a perfect write up to get everything working. SEARCH IS YOUR FRIEND.
Good point!
Thank you
i appreciate the advice in pointing me in the right direction. but it seems like a lot of you aren't very newbie knowledge friendly. i posted what i was experiencing in the hopes of getting a point in the right direction. not a solution. turns out my Sim card was corrupted. all i had to do is go and grab a new one. i apologize if my question seemed too basic and trivial to you . but it turns out that i just made a logical investigative approach to my problem . I followed rotos guide to the letter so i assumed that AT&T had also latched on to the idea of imei blocking. I have done several apps for the android market ,and am constantly wanting to learn more . some of you have great skill sets but no patience for new comers. but all in all i will not post in the forum anymore if it involves being downgraded for simply asking for help, isn't this why we have forums for the techs the geeks the cpu nerds. who would have thought amongst intelligent people we still deal with aristocracy .
i did have a t-mobile tab and then returned and bought att tab and it works just fine now . like i said in the forum i am learning so please bear with me
Aristocracy has and will always be common among us nerds blame it on our our societal influences.
Regardless of that, people are more upset about you not searching the forum/threads. Please use the search option , it will save us all time and wasted bandwidth. Also post in the correct sub forum. This section is meant for what it was named for, development only. There is a general/ Q&A section.
Once again, I can't stress the search feature enough. It will seriously help. I promise.
Not flaming you, just trying to help direct you
i appreciate it thank you
hey guys im on roto's v4 and it works for both tmous and att
Can someone point me in the direction of the AT&T APN? I searched stickies. Hope I didnt overlook
Try Google.
I just bought a LG Spectrum. I was led to believe it was a thunderbolt until I got it. I am trying, and have searched, for flashing procedure for pageplus mobile. The only help I have found said to contact a person who could help, and I haven't recieved word back.
I would like a guide, or be shown a link to a guide. I have looked here, and googled, but I just have a feeling I am overlooking something. I have flashed a Droid X to page plus, and a razr. But I can find nothing on this.
I apologize in advance if there is a easily found thread, but i myself can not locate one.
Thanks
The Beav
Hi first of all I would like to thank you in advance for your help i can feel I made the right decision to post here Im kinda a newbieat android devices amd happends that my aunt gave me this Motorola Droid Bionic in 4.1.2 JB and I was wondering if there any way to use it in the Philippines with a Philippine GSM carrier, I know that this phone is a CDMA from verizon and I had done some browsing and found out that the GSM caoability of the device is plausible Im currently using a GSM network provider right now, is it possible for me to use it here in the Philippines and what should I do? or what are the steps and which threads should I read im not really an android guy buy im willing to learn )) thank you so much
KMTanaka said:
Hi first of all I would like to thank you in advance for your help i can feel I made the right decision to post here Im kinda a newbieat android devices amd happends that my aunt gave me this Motorola Droid Bionic in 4.1.2 JB and I was wondering if there any way to use it in the Philippines with a Philippine GSM carrier, I know that this phone is a CDMA from verizon and I had done some browsing and found out that the GSM caoability of the device is plausible Im currently using a GSM network provider right now, is it possible for me to use it here in the Philippines and what should I do? or what are the steps and which threads should I read im not really an android guy buy im willing to learn )) thank you so much
Click to expand...
Click to collapse
As far as I can tell, all you need to do is replace the SIM card that works for your carriers over there. Hpe that helps.
Try the sim of not you need to modify the radio config
KMTanaka said:
Hi first of all I would like to thank you in advance for your help i can feel I made the right decision to post here Im kinda a newbieat android devices amd happends that my aunt gave me this Motorola Droid Bionic in 4.1.2 JB and I was wondering if there any way to use it in the Philippines with a Philippine GSM carrier, I know that this phone is a CDMA from verizon and I had done some browsing and found out that the GSM caoability of the device is plausible Im currently using a GSM network provider right now, is it possible for me to use it here in the Philippines and what should I do? or what are the steps and which threads should I read im not really an android guy buy im willing to learn )) thank you so much
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2257993