Database Develop

How to unroot my verizon tab

Alright guys i have searched and tried and tried. Currently i am on dj11 with kernal version stated as 2.6.32.9 and right below it has [email protected]#3. I am on 2.2
So what ive tried:
-I used heimdall to flash back to stock but as you can see the kernal version says im still rooted although superuser app is not installed. This causes the update to fail
-I tried to use superoneclick method to unroot but it does not work
What i want is to be stock with no root and be able to update. Any help or suggestions would be appreciated.
FYI i also used all the thread procedures on the forum (gizmo ninja and how to unbrick tab)

Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587

TabFreak said:
Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587
Click to expand...
Click to collapse
i believe i tried that already and it still had the words "rooted" under the kernal version. It also didnt allow me to update. I will try it again.

Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.

TabFreak said:
Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.
Click to expand...
Click to collapse
Will try now. Ahh I hope this works!

killerapl said:
Will try now. Ahh I hope this works!
Click to expand...
Click to collapse
Flashed and guess what?? Didnt work. Kernal version still says 2.6.32.9 [email protected] Ugh!!!

Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.

TabFreak said:
Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.
Click to expand...
Click to collapse
Yeah it does. Goes halfway and then stops and has exclamation mark. I tried gizmoninjas method to update but still quits. I'm totally lost.
Sent from my SCH-I510 using XDA App

I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.

TabFreak said:
I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.
Click to expand...
Click to collapse
I will give that a shot. The current gb leak is rooted. I did post asking to see if they (oldmacnut) had the unrooted version. Personally I like the rooted option but I do want to sell the tab and can't sell it rooted unless the person doesn't care. Bedside this issue the tab is fine and working properly.
Thank you so much for all your help. I will keeep you posted on the outcome.

Nope didn't work. Still rooted. I'm so over this hahah
Sent from my SCH-I510 using XDA App

I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!

TabFreak said:
I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!
Click to expand...
Click to collapse
There has to be. Wish it was like my Droid charge and just flash via Odin. If I can get the ginerbreak leak with no root I will be happy.
Or sell it to someone that doesn't mind its rooted.
Sent from my SCH-I510 using XDA App

There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.

TabFreak said:
There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.[/QU
I'm gonna give it a try tomorrow. I just have to make sure if I flash under phone or PDA with Odin. Don't know if you know. For phones its PDA. Not sure with tabs. Thank you so much
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse

I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.

TabFreak said:
I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.
Click to expand...
Click to collapse
You effin rock!!! It worked! I now have non rooted stock gingerbread. Thank you for all your help and investigation for the right files. Youre awesome. Now time to sell this baby
Or i spent so much time doing this i think im attached now hahaha

Glad it worked the way you wanted. I went back to the rooted version of Gingerbread. Everything works the way I want it to so no reason to change (for now anyway).

No OS installed - but can boot to Safestrap

I somehow screwed up a flash and now I have no OS installed but I can boot to Safestrap recovery. Any ideas on how to get the OS loaded? I'm going to see if I have an micro SD to SD converter so I can load the OS there and try to flash via external SD. Is there another way? Thanks!

delfinparis said:
I somehow screwed up a flash and now I have no OS installed but I can boot to Safestrap recovery. Any ideas on how to get the OS loaded? I'm going to see if I have an micro SD to SD converter so I can load the OS there and try to flash via external SD. Is there another way? Thanks!
Click to expand...
Click to collapse
I think the way you mentioned is the best and only way. Good luck!
What ROM are you going to flash?

delfinparis said:
I somehow screwed up a flash and now I have no OS installed but I can boot to Safestrap recovery. Any ideas on how to get the OS loaded? I'm going to see if I have an micro SD to SD converter so I can load the OS there and try to flash via external SD. Is there another way? Thanks!
Click to expand...
Click to collapse
I had the same issue, and tried flashing multiple times via the external SD. Unfortunately, given that I got to your current situation by wiping everything but the external SD, it still wouldn't work. I flashed multiple times, but it always just said that it couldn't mount /data and /system. I ended up doing the MJ5 Restore found here: http://forum.xda-developers.com/showthread.php?t=2559715
Trouble is, now I can't seem to get back to KK for the life of me....good luck!

jim256 said:
I had the same issue, and tried flashing multiple times via the external SD. Unfortunately, given that I got to your current situation by wiping everything but the external SD, it still wouldn't work. I flashed multiple times, but it always just said that it couldn't mount /data and /system. I ended up doing the MJ5 Restore found here: http://forum.xda-developers.com/showthread.php?t=2559715
Trouble is, now I can't seem to get back to KK for the life of me....good luck!
Click to expand...
Click to collapse
Yep - I used the MJ5 Restore and all is right with the world again. Thanks guys!!!

delfinparis said:
Yep - I used the MJ5 Restore and all is right with the world again. Thanks guys!!!
Click to expand...
Click to collapse
You going to stick with JB then or go KK?

jim256 said:
You going to stick with JB then or go KK?
Click to expand...
Click to collapse
I went to KK - you're not able to?

delfinparis said:
I went to KK - you're not able to?
Click to expand...
Click to collapse
Negative, was wondering if you might let me know precisely how you did it?

jim256 said:
Negative, was wondering if you might let me know precisely how you did it?
Click to expand...
Click to collapse
Ha - I don't remember. Where are you getting stuck?

delfinparis said:
Ha - I don't remember. Where are you getting stuck?
Click to expand...
Click to collapse
I'm going through this entire guide:
http://forum.xda-developers.com/showthread.php?t=2712039
I don't seem to get stuck anywhere until the very end. After I've finished all steps, it just never boots past the Note 3 splash screen.

You need to odin four files to boot into kk, look into mr tropazr's thread it's thorough and informative.

same issue
Okay i will start from the top. I have a note 3 on at&t that i used towel to root with. I downloaded su, busybox, safestrap,etc. Long story short i didnt back up when i wiped everything and i cannot get safestrap to laod any new rom, it states there is no os on the device. I then tried to use odin to reflash to stock and i get the smd header check failed message. Any help would be appreciated, I have also tried the mj5 recovery found here (http://forum.xda-developers.com/showthread.php?t=2559715&highlight=rev+check+fail) with odin and get the SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2

theradioinside said:
Okay i will start from the top. I have a note 3 on at&t that i used towel to root with. I downloaded su, busybox, safestrap,etc. Long story short i didnt back up when i wiped everything and i cannot get safestrap to laod any new rom, it states there is no os on the device. I then tried to use odin to reflash to stock and i get the smd header check failed message. Any help would be appreciated, I have also tried the mj5 recovery found here (http://forum.xda-developers.com/showthread.php?t=2559715&highlight=rev+check+fail) with odin and get the SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
Click to expand...
Click to collapse
mj5 is 4.3 go here http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117

jerrycoffman45 said:
mj5 is 4.3 go here http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
Click to expand...
Click to collapse
I tried those files as well and followed the same method step by step and it would not work. I am completely lost at this point.

theradioinside said:
I tried those files as well and followed the same method step by step and it would not work. I am completely lost at this point.
Click to expand...
Click to collapse
Perhaps I am missing something I downloaded all 5 files from mega, what is the fith file for the one that says n900aucucnc2_n900attcnc2_n900aucucnc2_home.tar.md5? I know where to properly place the other 4 files but im not certain about that one.

theradioinside said:
Perhaps I am missing something I downloaded all 5 files from mega, what is the fith file for the one that says n900aucucnc2_n900attcnc2_n900aucucnc2_home.tar.md5? I know where to properly place the other 4 files but im not certain about that one.
Click to expand...
Click to collapse
The home file is all 4 files in 1. Just use the 4 individual files to install original NC2 firmware and wipe at the same time. Ignore the home file.

440bro said:
The home file is all 4 files in 1. Just use the 4 individual files to install original NC2 firmware and wipe at the same time. Ignore the home file.
Click to expand...
Click to collapse
I tried that and I am goint to attempt to put the 4 in one on the ap spot, i think it says pda in odin.

theradioinside said:
I tried that and I am goint to attempt to put the 4 in one on the ap spot, i think it says pda in odin.
Click to expand...
Click to collapse
Yes that would be correct. Using the home file is like using all 4 files only the home file doesn't wipe before installing. It installs firmware like an ota update would. I thought using the 4 files would reset you, and give you a clean install.

I found the fix bro THANK ME I have the same problem and I stumbled to this
Go to this forum http://forum.xda-developers.com/showpost.php?p=51572044&postcount=2 and search for this word Quick Jump Start
follow the steps. YOU'RE WELCOME

theradioinside said:
I tried that and I am goint to attempt to put the 4 in one on the ap spot, i think it says pda in odin.
Click to expand...
Click to collapse
see if you can fix it using the link in the above post if not let me know and I will back up my stock ATT KK 4.4.2 NC2 in safe strap after factory reset and I can send it to you. You can flash that and see if that works.
And what I understand is you started from stock 4.4.2 NC2 and than you towel root than installed SU and busybox and than installed the SS . After you went into SS, did you wipe the stock rom slot? Can you please explain in detail including each step so we know.

[odin][firmware] i537ucucne3 (4.4.2)

I didn't flash these files because I'm running hyperdrive and I like my set up. Whoever uses these odin files can let everyone know if they're 100% working or if they have any problems.
https://docs.google.com/uc?id=0B6Lj6PgrbSjibXdaTFlRSWw4NVk&export=download

dkeepitabuck said:
I didn't flash these files because I'm running hyperdrive and I like my set up. Whoever uses these odin files can let everyone know if they're 100% working or if they have any problems.
https://docs.google.com/uc?id=0B6Lj6PgrbSjibXdaTFlRSWw4NVk&export=download
Click to expand...
Click to collapse
Where did you find these because I posted these a little earlier than your post same exact file name?
http://forum.xda-developers.com/galaxy-s4-active/help/link-to-sgh-i537-stock-4-4-odin-files-t2823709

dynamiclynk said:
Where did you find these because I posted these a little earlier than your post same exact file name?
http://forum.xda-developers.com/galaxy-s4-active/help/link-to-sgh-i537-stock-4-4-odin-files-t2823709
Click to expand...
Click to collapse
It's a coincidence that we had the same files. Well my friend Dung (pronounced Young) sent me a link through my email.

Confirmed
Just recovered from a soft brick with them. phone working fine
YAY 4.4 ODIN!!!

firestorm942 said:
Just recovered from a soft brick with them. phone working fine
YAY 4.4 ODIN!!!
Click to expand...
Click to collapse
Nice! :good:

Worked with no problems!
Flashed all 4 files using Odin 3.07 over stock, unrooted, NC9 OTA , which in turn I had flashed over stock, unrooted, ML2 through stock recovery. I had used the same Odin 3.07 to flash ML2 over MF3 (which came with the phone).
I had rooted the MF3 and installed Safestrap on it at some point. Once I decided a couple of days ago to try to upgrade all the way to NE3, I uninstalled Safestrap, all other programs I had installed and unrooted with SuperSu and did a factory reset in preparation for the ML2 flash with Odin (the phone still said custom when it booted after that, but once I flashed the ML2 Odin files, the phone was back to the stock boot animation).
I actually was stuck on the stock, unrooted, NC9 yesterday because after trying to flash the NE3 OTA through the stock recovery, the OTA seemed to be applied, but upon reboot the phone was still at NC9? And today, the solution! Thanks to all involved!:good:
By the way, I checked my knox counter when I entered Download (Odin) Mode before I flashed NE3 and it was at 0x0, so it seems that neither rooting nor installing Safestrap on MF3 changed the knox counter to 0x1
Next step, root with Towelroot, see how that goes (Thank you Geohot!):good:

flashed successfully from nc9. working phone, data, GPS and camera.

Can anybody who has successfully flashed this package post the MD5 for the zip file? I want to make sure people are not trying to flash a corrupt file.

Devo7v said:
Can anybody who has successfully flashed this package post the MD5 for the zip file? I want to make sure people are not trying to flash a corrupt file.
Click to expand...
Click to collapse
If you tell me how get the MD5 from it, I'll give it a try.

Devo7v said:
Can anybody who has successfully flashed this package post the MD5 for the zip file? I want to make sure people are not trying to flash a corrupt file.
Click to expand...
Click to collapse
I found a program by the name of MD5 Checker V4.0.0. This is the MD5 that it gave me: 59E84894B0C760E21955F1194392E61A

this porgram for android phones md5
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app

tet1 said:
this porgram for android phones md5
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
Click to expand...
Click to collapse
If your question was about my last post where I posted the MD5 for the SGH-I537UCUCNE3_v4.4.2_ATT_ALL.zip file that I got using the program Checker V4.0.0.? The program is a Windows program, not an Android App.

yes I know that windows program and I said md5 file for android Samsung phobes not program app ... and the odin files 4.4.2 NE3 worked good without problems
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app

gcam1964 said:
59E84894B0C760E21955F1194392E61A
Click to expand...
Click to collapse
59e84894b0c760e21955f1194392e61a confirmed using Microsoft File Checksum Integrity Verifier v2.05

OK, I'm in over my head I have i537ucucne3. I flashed s5 conversion v5+ deodex_me. I'm a noob and I didn't make a back up first. Now I just want to get back to stock. If I flash the firmware in this thread, will that put me back to stock? Any help is much appreciated , please, and thank you.

jeffrausa said:
OK, I'm in over my head I have i537ucucne3. I flashed s5 conversion v5+ deodex_me. I'm a noob and I didn't make a back up first. Now I just want to get back to stock. If I flash the firmware in this thread, will that put me back to stock? Any help is much appreciated , please, and thank you.
Click to expand...
Click to collapse
Yeah, if you flash this firmware you will be completely stock. It week completely wipe your phone and you will have to reroot.

Awesome, thank you much for the reply.
Sent from my SAMSUNG-SGH-I537 using Tapatalk

Wait. . Do I flash with safestrap, or do I need to use odin
Sent from my SAMSUNG-SGH-I537 using Tapatalk

I figured it out. Flashed the files with odin. It's running great. thanks again for the help. You guys are geniuses.
Sent from my SAMSUNG-SGH-I537 using Tapatalk

Hello, friends, but when I flash the firmware, Odin says fail ? Please help MEEEEE !

Please help

Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.

What method are you using to flash? Odin or safestrap? Do you have safestrap installed?

feelinfroggy23 said:
Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.
Click to expand...
Click to collapse
It might be the actual stock ROM (I didn't check that particular file you mentioned) but in general the stock ROM for this phone comes in four files which begin with the following:
AP, CP, CSC, BL
You can load those in their corresponding spots in Odin (BL in bootloader, and so on)
Or you can head over to sammobile and download the stock firmware, which is a Samsung Kies dump file. This is one giant tar ball ( like the one in the video) which you'll just load into the PDA section of Odin 3.09 and flash away.

When you're clicking on ODIN are you running it as Admin? Also see the guy in the video using a USB 2 cable.

yes i am running as admin. it only works when i only use pda. when i put in the bl and csc and cp is keeps failing. after if flashed the pda file the phone reboots and freezes on the samsung screen. should i try doing it one by one?

it wont work still failing. should i flash one by one?

I did but i cant load it. i only get to the samesung logo and it freezes. only thing i can get into is download mode and the stock recovery. is there a way to boot into safestrap when phone is off? im running out of ideas and ive tried to do it on different computers and cords.

it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys

feelinfroggy23 said:
it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys
Click to expand...
Click to collapse
Don't flash the bootloader and you should be fine

I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App

Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A

Waiting4MyAndroid said:
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
Click to expand...
Click to collapse
the download says thats for the gs4?

feelinfroggy23 said:
the download says thats for the gs4?
Click to expand...
Click to collapse
It is the right tar. I have used it many times to go back to stock after root.
Sent from my SAMSUNG-SM-G900A

Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App

feelinfroggy23 said:
I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Use the G900A_DOwngrade_to_NCE.tar from this link http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 and flash in the pda. that should fix your problem.

feelinfroggy23 said:
Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Download the G900A_Downgrade_to_NCE.rar. Unzip and you should get this file "G900A_Downgrade_to_NCE.tar.md5". Now Run Odin 3.09 as admin, and put your phone in download mode. In Odin click on the AP icon and point to the G900A_Downgrade_to_NCE.tar.md5. Wait until Odin finishes loading the file it takes some time. Plug usb cable to your phone while in download mode. Once Odin is ready click start. Wait until Odin is done. Your phone will reboot once the flash is done. Please Thank @muniz_ri for his hard work.

Yea. Prolly should have checked this forum before you went on the journey.
---------- Post added at 10:45 PM ---------- Previous post was at 09:56 PM ----------
Now, Instead of making sarcastic comments, I will provide some assistance. There is one thing left out of all of these tutes that took me a while to catch on to. As a result, my phone was doing the same thing.
When you follow the downgrade instructions, yes leave out the boot loader. Sometimes, the downgrade doesn't do the job properly, so you'll have to go to this thread, scroll to the very bottom post and you'll see a link for "G900A_NCE_Stock_Modem"
You will need to flash this along with the stock firmware. It should correct the boot issue. (Flash in PDA slot)
Furthermore, you will not be able to update via WiFi OTA. You'll have to download the official update files in .zip format.
Go to this thread for the " G900A_NCEtoNG3_OTA.zip" to update from NCE to NG3.
This next step is optional, but it won't hurt to try it. Go here and grab the stock NG3 modem and recovery. Flash each (one at a time) in the PDA slot.
My personal opinion of the 4.4.4 update is low. There are many issues with it. But if you're trying get the phone completely up to date then:
Go here for the final update.
You should now be set. Please thank @muniz_ri for his unrelenting dedication to helping others.
It is not my intention to be an ass, but you should begin with google, and then search entire AT&T forum before posting questions like this. Chances are, others have had the same problem, asked, and received a solution exactly like this.
Anyways, I hope I was able to guide you in the right direction...
Edit: It seems that both of the update zips are in the OA1 root guide thread.
P.S.
Your phone is from AT&T, right?

[Q] Odin and my Note 3

Here is my presentiment that I've posted elsewhere
My phone was working just fine this morning but after updating a few apps through Google Play my phone started throwing up messages that gapps process was continuously crashing.
I then restarted the phone and it would not get to the AT&T startup. I have since flashed the OC1 kernel through SafeStrap but now the phone will not leave the AT&T startup logo.
Any ideas for what I can do? I have an older backup but not on 5.0 like I should. If need be I'll be going through the entire reinstallation process of 5.0 again.
EDIT: Just realized that I have a bigger problem now since I cannot access SafeStrap Recovery.
Click to expand...
Click to collapse
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.

orangetag001 said:
Here is my presentiment that I've posted elsewhere
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.
Click to expand...
Click to collapse
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:

Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
Thanks a ton for the reply! I appreciate it immensely.
I'll go through those steps tonight and report back.

Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?

orangetag001 said:
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?
Click to expand...
Click to collapse
Place it in the AP slot.

Rooted i747 said:
Place it in the AP slot.
Click to expand...
Click to collapse
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way

orangetag001 said:
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way
Click to expand...
Click to collapse
Looks good!:good:

Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
YOU ARE THE MAN, MAN! Booted into it right away after it was finished!

Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.

orangetag001 said:
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.
Click to expand...
Click to collapse
Yes you would have to flash the NC2 Kernel then after you are done with Safestrap you need to flash the OC1 Kernel. To access Safestrap without Odin you would need to install the NC2 Flasher from here http://forum.xda-developers.com/note-3-att/development/nc2-flasher-app-unsafe-t2989141/ plus you need the two (2) files from here http://forum.xda-developers.com/note-3-att/general/att-nj5-safestrap-t2957471 Thanks @benwaffle and Thanks @carl1961.

Without Odin https://youtu.be/yIjb0AiZOd4
---------- Post added at 03:20 PM ---------- Previous post was at 03:16 PM ----------
Without Odin https://youtu.be/yIjb0AiZOd4