Hello, i have a N910T bought from aftermarket and i live in Romania, carrier Orange RO. I have tried many custom roms, international ports, everything and i have very bad signal and voice quality and many many many interruptions, people can't call me sometimes, i can't call sometimes (not registered on the network error) and my roomate has a smartphone bought from Orange RO and he does not have any problem . My APN is updated, i tried everything. So here is my question: Can i flash/port my Orange Romania ROM (PDA N910FXXU1BOC3 CSC N910FORO1BOC1) to my N910T? An if i port this rom it will solve my signal problems?
What to do? I spend all my money to buy this phone and it does not work properly, please help me.
Where i cand find modems to flash on N910T? Or is this a CSC problem?
I am now on N910TUVU1ANK4 android 4.4.4 (Firekat ROM)
Related
Hi Everyone,
Kies has updated my I9000 SGS to froyo from éclair and since then I haven’t had any access to either 2g/3G networks (except for a precious couple of hours). I bought the phone in the Netherlands and I am using it in Brazil, but this had not been an issue until the firmware update.
I have already hard-reset my SGS a few times , tried several froyo distributions and used several CSC with no avail.
Currently, my firmware is:
PDA: iI9000XXJPU
Phone: I9000XXJPU
CSC: I9000OXAJPU
Kernel:2.6.32.9 root sep-55 # 11
I’ve got signal (about -111dBm 1 asu), the phone has an imei, and it recognizes my SIM card, but as I said, it has no network connection.
After checking debug screen, I’ve also noticed the following info:
- Basic Information: No Service
- MM sate: NO_CELL
- CONN_STATE:Idle.
Anyone out there could help me out with this problem? I’ve really run out of ideas. Let me know if you people need more info on the current status of my SGS.
Cheers.
You probably need to enter the apn settings for your carrier
It has updated to Netherlands firmware modem and CSC they work in Brazil ??
jje
terranq said:
You probably need to enter the apn settings for your carrier
Click to expand...
Click to collapse
I've tried several times, with different carriers (meaning different SIM cards). It hasn't worked.
Any other idea?
JJEgan said:
It has updated to Netherlands firmware modem and CSC they work in Brazil ??
jje
Click to expand...
Click to collapse
As I mentioned, the phone was working perfectly fine under Eclair. Moreover, oddly enought, my wife's, who owns a UK orange SCS, is working perfectly over here under froyo.
I am afraid of bricking my SGS by trying my wife's SGS firmaware on mine, since is Orange specific. Does anyone see any problem with that?
Probably Ok with orange . But is their not a Brazil thread on here that may have more clues .
jje
Hi,
Info
I have a GT-I9305, Android 4.3, SentinelROM Version 5.00 with Build date of Oct 1st 2013.
Kernel 3.0.64-CM-gbc8f4c9, [email protected] #1 and
Baseband Version : I9305DXALI7
Background :
My Samsung S3 LTE was initially locked to Orange/EE, which I did a network unlock by downgrading to 4.1.1 and using that famous menu command *#19...Subsequently I upgraded to Android 4.3
Issue
I am using Virgin Network here in UK, but the phone always shows Orange/T-Mobile signal. Also, it stops sending SMS messages after a few days. If I put the SIM Card back in Nexus 4, it correctly shows Virgin Network on the phone. (I am aware that Virgin is a virtual network provider using Orange/T-Mobile).
Question
Is there a way I can show Virgin network on the phone? Currently it doesn't even detect Virgin network, if I do a search available networks. Is that due to an incorrect Baseband Version? If yes, could someone point me to the correct one? I did search on http://www.sammobile.com/firmwares/ but they all seemed to be for Android 4.1.1 and not 4.3 for I9305
I have tried flashing a few other basebands as well from this link : http://forum.xda-developers.com/showthread.php?t=2010116
But still not able to get Virgin network. Phone does seem to be working fine but I dont want to get suddenly caught out again whereby it stops sending SMS's again!
Thanks
Sam
You require a CSC that includes Virgin .
Try CPW carphone warehouse csc .
Or ask Virgin for the APN settup .
Android 4.3 is not released by Samsung so you will not find it .
JJEgan said:
You require a CSC that includes Virgin .
Try CPW carphone warehouse csc .
Or ask Virgin for the APN settup .
Android 4.3 is not released by Samsung so you will not find it .
Click to expand...
Click to collapse
Hi,
APN setup seems to be fine (goto.virginmobile.co.uk), SMSC shows as "+447958879890",145 ..How do I get CarPhoneWarehouse's CSC?
Sorry, don't know much about CSC so am a bit ignorant about CSC..
Cheers
Sam
sam_htc_touch said:
Hi,
APN setup seems to be fine (goto.virginmobile.co.uk), SMSC shows as "+447958879890",145 ..How do I get CarPhoneWarehouse's CSC?
Sorry, don't know much about CSC so am a bit ignorant about CSC..
Cheers
Sam
Click to expand...
Click to collapse
Modem CSC post or in a stock rom from sammobile.com .
BUK UK probably has CPW csc
Sorry i always delete CSC from roms otherwise i could post one .
All i say is that the CPW csc did have Virgin inside at one time .
JJEgan said:
Modem CSC post or in a stock rom from sammobile.com .
BUK UK probably has CPW csc
Sorry i always delete CSC from roms otherwise i could post one .
All i say is that the CPW csc did have Virgin inside at one time .
Click to expand...
Click to collapse
Hi JJEgan,
I am going to use the CSC Changer App, currently taking a backup of the phone. Is there anyway to quickly check the current CSC? (by checking some file in system directory etc or viewing build.prop etc to figure out the current CSC?) Asking this as USSD Codes don't seem to be running on my phone and I always get Connection Problem or Invalid MMI Code error message. So that means I am unable to run *#1234#
Cheers!
PS : Just tried to use CSC Changer App, but realized that either the phone should be on Android version lower than 4.2.2 or the ROM should be a Samsung Stock ROM! And in my case I am on a Custom ROM and on Android 4.3
http://ykkfive.blogspot.com/2011/11/samsung-csc-code-reference-3.html#.UmV5lPnBPeM
Got the list of CSC's above..What should I do next? And against UK is mentioned as : BTC, BTU, CPW, H3G, O2I, O2U, ORA, OXA*, TMU, TSC, VIR, VOD, XEU
So CarPhoneWarehouse is there in the above list and VIR (I assume VIR means Virgin Mobile) is also there..So how do I flash or what do I flash now?
Faqs and Guides .
http://forum.xda-developers.com/showthread.php?t=2198512
JJEgan said:
Faqs and Guides .
http://forum.xda-developers.com/showthread.php?t=2198512
Click to expand...
Click to collapse
Thanks JJEgan, I did look at the thread you mentioned and that's where I got the CSC Changer idea..but stayed back from actually doing it as I realized that the 2nd step mentioned about factory resetting the phone..The issue that I have currently is that to find out about my current CSC etc, I need to run a USSD Code which gives me an error message (about invalid MMI Code). So I would either probably leave it at that or better still get a new Orange contract SIM and port the number back from Virgin to Orange!
Hi All,
After updating XT1068 to Lollipop, both of sim card cannot connect to Network anymore (No Network). Eventhough, I tried many method/fastboot ROM, issue still persist. Strange thing is that whatever ROM i tried, my system version end with retla (latin america version). I am from Singapore and I think we have different network here. Question is how can i revert back my phone to let;s say retin (india version).
Please please Help. Any advise will be greatly appreciated. Thank you all in advance.
Rgds,
K
No one encountered this issue before? Can anyone help give me advice? is it hardware issue?
kaungmyataung said:
Hi All,
After updating XT1068 to Lollipop, both of sim card cannot connect to Network anymore (No Network). Eventhough, I tried many method/fastboot ROM, issue still persist. Strange thing is that whatever ROM i tried, my system version end with retla (latin america version). I am from Singapore and I think we have different network here. Question is how can i revert back my phone to let;s say retin (india version).
Please please Help. Any advise will be greatly appreciated. Thank you all in advance.
Rgds,
K
Click to expand...
Click to collapse
I was with this problem , the more my Motorola only work with 3G networks , I made the fastboot erase all the partitions and flash stock rom wrong on my Motorola XT1069 , to return to work perfectly I installed TWRP and went with adb shell and used dd if to record the XT1068 INDIAN partitions (FSC , hob , dhob ) and returned to work all GSM and 3G networks
Type * # 06 # and Checks if Your IMEI is normal and post here the answer ... maybe can help you.
(I'm probably using Indian network configuration here in Brazil and works perfectly . )
Tell me the version of your baseband also :good:
I thought he was dead for networks as my IMEI is 0 anyway and now works normal. Yours is not dead.
kaungmyataung said:
Hi All,
After updating XT1068 to Lollipop, both of sim card cannot connect to Network anymore (No Network). Eventhough, I tried many method/fastboot ROM, issue still persist. Strange thing is that whatever ROM i tried, my system version end with retla (latin america version). I am from Singapore and I think we have different network here. Question is how can i revert back my phone to let;s say retin (india version).
Please please Help. Any advise will be greatly appreciated. Thank you all in advance.
Rgds,
K
Click to expand...
Click to collapse
Restore to stock firmware or just flash the modem
Hi All,
Strangely, I have flashed Brazil ROM and my 2 sim cards back to normal now. I bought my phone at Singapore and I have no idea why this happened. All the while, I am using international version of ROMs and no issue. And I think Recently Flashing messed up and Now my phone is working well with Brazil ROM. Thanks to All.
Hello, so here's my problem. After changing mainboard to another i9305 mainboard, i cant make phone calls or use mobile data (except when i'm on 2nd floor in my house or in very open area). All i know for now is new mainboards' imei and that there was i9305 xxbma6(Singapore) firmware. I'm from Lithuania. Please help !
For now i have installed XXUFNJ1 FW version Poland (nearest i could find to my country :/ ), rooted and ready for your solutions
Some pictures:
Please someone help me :/ i have tried to flash every single baseband from this site
http://forum.xda-developers.com/galaxy-s3/development-i9305/modems-i9305-cwm-flashable-modems-t2010116
But still no service.
have you checked if you have properly attached the antennas?
I have an unlocked s10e which I bought used in the UK
All is fine, but it keeps trying to connect to o2 wifi and there is no way to disable auto-reconnect nor can I forget the network(s), it's so annoying. There is no hint of o2 on the phone other than these pre-installed wifi networks,
edit: csc is OXM (saomc_sm g970f oxm btu pp 0016)
so what I want to know is, do I have an o2 rom on the phone and how can I tell? if I do, is there a UK rom that is not linked to a network and so wont have these pre-installed wifi networks?
thanks!
Should See three CSC codes below the csc you listed. First and Second are what you're on right now, third is the carrier it came from...
If the CSC is OXM, It is unlocked and can switch CSC's no problem. If wifi is Auto Connecting I would Factory Reset the device and flash the latest firmware available WITH THE NEW SIM INSTALLED... Should solve the problem.
That post was over 2 months old, I hope they figured it out by now. ?