Ok, I have an HTC desire 500 Dual SIM (z4dug) I recently unlocked the boot loader of my phone via htcdev.com & I installed CWM very carefully with all steps as is as mentioned in this thread
http://forum.xda-developers.com/desire-500/general/how-to-root-install-cwm-twrp-install-t2804938
Yes, I was more than careful, I checked my HBOOT version & everything that I needed to check before proceeding.
Now It happened that I turned my phone off & turned it on again. I lost root so I had to flash CWMsuperuser again via recovery & turned it on.
After that I turned it off again for some reason. Now It won't turn on no matter what I do, what key combinations I press.
Scene 2:
Ok, It now vibrated for about 3 times now while it was off. Now I removed battery & tried turning it on still it won't turn on.
Scene 3:
I removed the SDcard & both my SIM cards & tried turning it on & it worked. It's on for now.
I've had enough of this CWM crap. Now the question is how do I get rid of this problem or atleast prevent it from happening in future? Any help is appreciated, Looking forward for a nice person to help me out of this situation.
My HTC desire 500 is still under warranty (about till 5th of may of this year). Should I take it to service center & ask them to restore it to factroy defaults ?
Related
i will try to be as detailed as possible. im coming from the kaiser community so go easy on me
when i had recieved the phone it would turn on go past the tmobile g1 screen and go into the recovery console. the console read. JF 1.41.
after reading around the best option i got was reverting everything back to factory settings.....and so i did. i installed the factory spl went back to rc29....then updated to rc 30 and installed the new cupcake.
everything was fine except for i couldnt get the phone activated given im an AT&T user.
this morning i finally recieved the unlock code from tmobile and when i turn the phone on with the att simcard, it gave me the triangle with the exclamation screen.
so i hit alt +l then alt w and after a reboot it would bring me back to the same screen. Also this recovery screen is diff from the jf 1.41 (im guessing this is the factory console).
now im out of ideas as to how to get this phone back in order. i would love flashing the DREAIMG.NBH but sadly my phone refuses to go in bootloader.
ive been trying to hold camera+ power and its jsut loads up the tmobile g1 screen.
any and all advice/helps are appreciated.
-thank you
so this is totally weird. i leave the phone unplugged with the battery out for about 3 hours. came back to work on it....turned it on and well it loaded and got me to the home screen ( no sim card ).
so i powered off the phone and inserted the AT&T simcard turn it on and it shows me the same screen again with the triangle and exclamation point.
how do u explain that ?!
pressed power for 3 seconds and then let go and held down the back key. it flashed the bootloader tricolor screen and then said ""everything will be reset to factory defaults .press send to reset"" and when i did that there was no change........nothing happened. ended up pulling the battery out..
Same problem..
I have very similar problem.. but mine takes much more than 3 hrs to come back.. and even then , the task manger keeps popping up from time to time in the home screen ,, so i guessed my home button was stuck or something...
After i found your "problem Sovled" post in another theread on 11th oct ..i thought i better take your suggestion before taking phone apart..
I was on 1.5 version and 2.22.19.26I radio. also i do not know whether i'm in RC29,30,33 ..
i'm really confused about all this radio,firmware ,recovery things....
Please Guide me ..
well first you need to get in your ph to find out if u have rc29. if you are able to get to home screen just hit menu - setting - about phone - all the way down it'll tell you what you are running.
i followed this guide to help me flash it to the cyanogenmod rom
http://forum.xda-developers.com/showthread.php?t=563679
hopefully it helps. but if you are able to get into bootloader unlike me then jsut flash the rc29 hopefully it will solve your problem.
my home key acted like it was stuck but now everything is working fine.
Thanks for Replying so quickly ..
I managed to go to the bootloader screen(tricolor) ..actually it went without even pressing the camera button(any idea why??) after leaving the phone without battery for about 5 hours.. and i flashed the Dreaimg-RC29 file .
Since then i'm Stuck in recovery mode again.. but this time the recovery utility is different (yellow letters)..i.e hopefully RC29 is succefully installed.
I wanted to complete doing your suggested guide before asking any more questions, but now i unable to so what shud i do now?
IS the task manger popping up involuntarily sometimes for you in the cM builds?
Can it be that you had a hardware button issue, which somehow rectified itself when going to Cyanogen..
I really appreciate your taking time to answer my questions ..
well sounds like jsut what had happened to me.
make sure you have tmobile simcard on you with a dataplan.
you're going to have to leave your phone off without the battery or just turned off for a while. from here on out it was trial and error. i kept trying to turn the phone on hoping it would go past the recovery screen once it did i activated the phone and finally completed the root process.
as for the cyanogen mod rom i think you are right. though on my initial flash i had a bunch of force closing apps but it all fixed itself upon a restart. ever since then i haven't seen the recovery mode every time i boot it.
PS: that reocvery mode that you see is the stock recovery meaning yes u have flashed RC29 sucessfully.
so i jsut flashed to CM 4.2.3.1. and well im back to square one. im booting into the recovery by default. obviously confirming my doubts about the hardware problem.
im going to try and leave the phone off for a while and see if i can get it to load up. usually that solves my problem.
Oh..
Thats depressing.. Anyways... Lets do it together then I have kept my phone unsed for about 16hrs now.. hope it works ..
Have you tried the HTC Diagonistic program for g1 (DREADIAG.nbh) ?.. I am yet to try it out as i cannot go to the bootloader..
http://www.megaupload.com/?d=7NRX7H40
which version of cyanogen were you using before this happened?
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
mtkhalid said:
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
Click to expand...
Click to collapse
Did you update from 4.1.9999 straight into 4.2.3.1? If so, that's the problem (maybe).. I suggest you install the HTC 1.6 ADP Rom (link in the cyanogen 4.2.3.1 post) then upgrade to 4.2.3.1. Make sure everything is updated.... rom, recovery & spl (before you upgrade SPL make sure you have the most recent radio version first! or you'll brick the phone). then give it a try and see what happens...
you are right. the first time i just flashed the new rom. the second time around i followed the guide except for i flashed the latest cyanogen rom.
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Still waiting for your answer
SaiSantoshD said:
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Click to expand...
Click to collapse
how did you flash the RC29? after pressing the power button
did it give you any errors? once its flashed, reboot by pressing home and back (or w/e the SPL tells you to)
it should boot into the rom
Home button problem (repaired/solved)
Firstly, thanks for responding ..
I had flashed RC29 when it had gone to the tricolor bootloader screen on its own
but after that it would not go anywhere other than recovery(exclamantion mark)
Now good news
4 hours back i opened the phone again(third time) , and took a safety pin and started scraping(gently) the non shiny parts of the connector ( daughter board to main board) .
I think it was previously shorted near that area , so by scraping removed the shorted metal joints .. and now the phone booted up to RC29 (just like that) and i even installed the cyanogen mod ..
Many thanks to u all .. hope this Comes UP in google search for people with similar problems(and there are many)...
KEYwords: Home button stuck on recovery no booting
Ah wow didnt think of that lol.. glad to see you got it to work
Hi guys,
UK G1 (Dream) phone recently updated to the 1.6 build, all working fine.
Yesterday I tried installing the free app Shop Savvy. the phone resetted itself after install and sat on the G1 boot screen permanently.
Now phone will pass this boot screen (Tmobile G1)
Tried:
Recovery mode - will not work at all
Quick boot - brings up the multicolour screen but does nothing after.
**PHONE IS NOT ROOTED**
looks like I have had the phone JUST over a year, not looking good...
Any ideas?
You can boot in to the SPL/bootloader so thankfully you haven't bricked
If you're on a contract with tmo you could take it back to the store and they should give you a replacement, but where's the fun in that?
If you want to fix the problem yourself, all you need to do is downgrade to firmware 1.1, then accept the OTA update to 1.6.
Here's the procedure:
1)Put the phones SD card in to a card reader and format as fat32
2) Extract this file and copy it to your SD card as 'DREAIMG.nbh'
3) Put the card back in the phone and hold down power and camera to boot in to the bootloader.
4) Flash it. (Action button is the trackball).
It's a good idea to leave the charger plugged in and have a decent amount of charge in the battery (eg 40%+).
Afterwards the phone will restart and you will need to re-enter your google account info. All your apps and data will be gone, but there's not much we can do about. You can set things up and install apps while you wait for the prompt to update.
Thanks alot AdrianK,
Really appreciate the steps and info, nice one
I have done some flashing on other phones etc so I have no problem with this. However, I am wondering how a normal app such as Shop Savvy could corrupt my ROM and am wondering if it might not be better to get a new phone as this one could have hardware fault?
What do you think?
Silver.
OK,
did exactly as you said Adrian. Phone went through all the flashing routine then, right at the end said press action button to continue (trackball) every time I press the trackball phone returns to the bootloader screen
What now?
SilverfoxUK said:
OK,
did exactly as you said Adrian. Phone went through all the flashing routine then, right at the end said press action button to continue (trackball) every time I press the trackball phone returns to the bootloader screen
What now?
Click to expand...
Click to collapse
I think you can take the battery out restart the phone
Thanks but unfortunately I have already tried that.
Phone just sits on the G1 boot screen as before...
Any other Ideas?
is that ROM you linked for me a UK ROM Adrian?
Once you get to RC7 use these to build back upto 1.6
http://code.google.com/p/official-android-firmware/downloads/list
SilverfoxUK said:
Thanks but unfortunately I have already tried that.
Phone just sits on the G1 boot screen as before...
Any other Ideas?
is that ROM you linked for me a UK ROM Adrian?
Click to expand...
Click to collapse
Yeah that's the RC7 ROM, the UK ROM for 1.1. RC29 is 1.1 for US phones.
This is all very odd, especially that it was an app that caused it, or as you suggested possible hardward failure. Oh well, I guess all you can do now is take it back to tmo.
Hi,
I managed to brick my Milestone, terminally I'm afraid, but the symptoms are different than what I see around the forum so they might interest someone else.
So, I first backed up everything with GOT Nandroid and Titanium Backup then modded CyanogenMod 7 RC4 0.08-11.04.05 (Android 2.3.3) successfully, except that the SIM was locked and would not unlock, although it works in another phone. This was a bug supposedly fixed in version 6 of Cyanogen...
Browsing the forums, the only thing that made a bit of sense was that maybe the GSM frequency was set to the wrong value. There is a Nandroid mod (but not GOT) that allows you to change that so I entered GOT Nandroid again. Since it had no such option, I Rebooted. Then, the fun begun.
The phone got stuck on the Motorola logo and no button, not even Power, worked anymore. After waiting for many minutes with no progress, I took out the battery - that made a change , the phone shut down. I then put it back - the phone immediatelly, no, instantly, cause there's no delay as when you were powering it up, lights up with the same Motorola logo. Tried several times, always the same behavior.
I left it booting (but also connected to the charger) for a whole night, no change.
The phone is not seen by the PC when connected to USB. It won't reboot, normally or to recovery. Buttons won't work at all. Yeah, tried with or without the SIM and the sdcard, no change. Tried to start without battery, just the charger, doesn't work.
Useless to say, I am getting bored of that Motorola logo
I suspect that the bootloader in the internal memory got corrupted. Can this be flashed even if the device is not seen by the PC (I mean by the RDSLite installed on it)?
Cheers
When the charger is connected to the phone try at the same timeull out and pull in the battery while holding the buttons who will get you in the OR
Yup, it worked. So first I got the battery with a question mark. Then I put in the battery and I got a battery at 60%. Since I was holding Power+Camera, it continued to the Recovery mode and now I have a working Milestone with Cyanogen mod!!
Thank you a lot, Mikicishte.
I still have to see about the initial locked SIM problem... but that will be mostly fun.
florinadrian said:
I still have to see about the initial locked SIM problem... but that will be mostly fun.
Click to expand...
Click to collapse
Have you tried to factory reset the Milestone, to see if after that the SIM is accessible again ?
http://forum.cyanogenmod.com/topic/14099-sim-card-not-detected-after-factory-reset/
You could try also to install a logger application catlog for example (https://market.android.com/details?id=com.nolanlawson.logcat&feature=search_result ) to see in the logs if you can find out more details to help you with the investigations...
I did the factory reset as part of installing the mod.
Even if the post quoted reports the wipe as the source of the problem and not as a solution, I just wiped again with no good result.
Will try catlog.
florinadrian said:
I did the factory reset as part of installing the mod.
Even if the post quoted reports the wipe as the source of the problem and not as a solution, I just wiped again with no good result.
Will try catlog.
Click to expand...
Click to collapse
or maybe you could try to use an unlock tool to see what error is reporting
https://market.android.com/details?id=com.droidgram.bladeunlock&feature=search_result
Hi All
This is my first post here and apparently I cannot post external links - so I'm gonna have to cheat by removing a few spaces from the links. Mods please don't penalize me am really desperate.
I got my N1 around 6 months ago. Got the gingerbread 2.3.6 update couple of months back and all was well.
Then today I decided I want to try the CyanogenMod on my phone. SO here is what I did:
1. I went to this link below to unlock the bootloader. I got all the way up to step 7 and rebooted my phone. Phone rebooted okay and all data was reset. So far so good.
http ://ilikemygooglephone.com /2010/01/06/ complete-guide-with-images-unlock-bootloader-and-root-google-nexus-one-mac-windows-linux/
2. I then carried on on the same page to the next section titled "Superboot [To actually root your Nexus One]". (Since then I've discovered that this was unnecessary - this is where I may have screwed up) I got to the end successfully - got an okay on the screen and tried to reboot the phone. It would not come on. I tried to power it on with the trackball down and it came on to the bootloader screen. Since I wanted to go on and flash a Recovery Image anyway I wasn't too bothered here.
3. I then went on to this link here:
htt p://ilikemygooglephone.com/2010/01/07/ how-to-flash-ra-nexus-recovery-image-1 -5-3-for-nexus-one/
Again I got to the end successfully, and got the okay as it said on the website.
Now my phone won't come on at all. It does come on to the bootloader screen when I hold the trackball down and it says Unlocked across the top. But thats it. If I try to go into recovery, it will just switch off. If I try to power it on normally it just will not come on.
Help please. Have I killed my phone or can I still save it .
That is an old recovery, try this.
http://forum.xda-developers.com/showthread.php?t=611829
Flash it with fastboot.
I have an AT&T Note 3. I was rooted using the KINGO app, but returned my phone to stock several weeks ago and the rom shows official and the knox count is 0. I am running the stock AT&T Note 3 Android 4.3
The other day, an official AT&T android update was pushed to my phone. The update bricked my phone and now I am unsure if I can even recover what was on my phone...or at the very least get it running again. For now, I am without a phone.
When I can get the phone to power up, the phone attempts to "Recovery Booting" (this is displayed in blue letters in the top left corner with the galaxy Note 3 Logo in the middle). It tries to install this AT&T update following the recovery wording when powering it on normally and when using Volume UP/Home/Power . The update progresses towards 100% then "completes" sometimes, but then the screen goes black and the phone does not start back up. I have to remove the battery for a period of time and replace to get the phone to do anything
I can get the phone to go into download mode (Volume down/Home/power), but my phone did not have USB debugging turned on the last time I was able to access the options, so it is not recognized by kies/odin, etc!
Even though their update caused the problem, AT&T wont help me (over the phone or at the store) as my phone is over a year old...their solution is to buy a new phone and plan as they say they can't do anything to fix the phone.
ANY HELP WOULD BE GREATLY APPRECIATED!
Can you get into recovery?..if so try to factory reset then maby you will be able to power up get to developer options and turn on debug so you can use odin...other option..I have heard of some doing this..go to Bestbuy Samsung counter..ask them if they have the odin tool. If they do they may be able to get you up and running.
FIREKAT V11/S5-V1
Don't worry bro.
Just follow this post to put your phone back to stock and get it rooted again. My phone used to brick and I went through it.
Follow the steps carefully, and you'll get your phone back.
http://forum.xda-developers.com/showthread.php?t=2559715