Hello guys,
I have a Galaxy Note GT N7000 and i want to root it. My previous phone was an iPhone so i used to work with IOS for the jailbreak... , android is something new for me. I read a lot of tutoriels concerning this but i have always issues with my version which is XXLRK (android 4.0.4) and the process bug on " E:signature vérification failed. " i want to root the phone with the last version of C-ROM based on 4.4.4 . Could someone give me links to update my kernel, the file to root, and the CWM so that i can install the C-ROM 4.4.4.
Sorry if there is some mistakes, english is not my first language. don't forget, my version is XXLRK and thank you guys
Search for Philz kernel for 4.0.4 and install it using recovery. This will give you cwm. But you will need a newer version of cwm to flash kk. So install raw kernel .. Phone will not boot into android after installing the new kernel. But you will get a new recovery and flash the kk ROM and gapps.
Related
I have this Samsung galaxy Note gt-n7000. I rooted it with a new kernel AbyssNote 4.2 that even installed the CWM 5.8. It has the stock ROM 2.3.5 and i wanna update it with an official ROM from Samsung. Will there be any problem or the Official 4.0.4 Rom will just remove the root and the custom kernel?
I will install the official ROM with Odin
With Odin, you will lose root and your custom kernel.
Sent from my GT-N7000 using Tapatalk 2
When you flash with odin the root will be lost.After flashing your new 4.0.4 stock rom you can flash a rooted kernel via odin.
just check this thread:http://forum.xda-developers.com/showthread.php?t=1331784 and follow the instructions carefully!
All credits go to chainfire for his amazing job!
Moved To Q&A
Please post questions in the Q&A section
alensaqe said:
I have this Samsung galaxy Note gt-n7000. I rooted it with a new kernel AbyssNote 4.2 that even installed the CWM 5.8. It has the stock ROM 2.3.5 and i wanna update it with an official ROM from Samsung. Will there be any problem or the Official 4.0.4 Rom will just remove the root and the custom kernel?
I will install the official ROM with Odin
Click to expand...
Click to collapse
No problem.. just download the 404 firmware and flash it with PC odin... root and custom kernel will be lost.
Hi everyone.
I am on this:
Android version: 2.3.6
Baseband version: N7000XXLB2
Kernel version:[email protected] #2
Build number: CheckROM NoteHD V6
I don't know why but sometimes I (Vol Up+Home+Power) and is CWM 6 and sometimes CWM 5
I bought the phone a month ago it came with a 4.0 version (good one), I searched in here best ROMs (CheckROM came across) download it and now I have 2.3.6 version.
I have downloaded 4 different kinds of JB version from across the forums and none of them have work....
I am thinking I download from here http://forum.xda-developers.com/showthread.php?t=1901191 the wrong Kernel version... I download XXLSC-XJB (JB Leak) I don't know if I have to use this XXLSA-XJB (JB Leak), or XXLS7-XJB (JB Leak), or any other I just download the first one.
Can anybody help me on how to instal the JB version of Android with CWM...
Thanks
:laugh:
are you just installing JB kernels on a GB rom? The phone wont even bootup
You need to install JB rom for a JB kernel to work.
there are a lot of JB roms in the Android Development section. Download and install using CWM. Read the procedure in the ROM thread.
melvinelelefante2000 said:
Hi everyone.
I am on this:
Android version: 2.3.6
Baseband version: N7000XXLB2
Kernel version:[email protected] #2
Build number: CheckROM NoteHD V6
I don't know why but sometimes I (Vol Up+Home+Power) and is CWM 6 and sometimes CWM 5
I bought the phone a month ago it came with a 4.0 version (good one), I searched in here best ROMs (CheckROM came across) download it and now I have 2.3.6 version.
I have downloaded 4 different kinds of JB version from across the forums and none of them have work....
I am thinking I download from here http://forum.xda-developers.com/showthread.php?t=1901191 the wrong Kernel version... I download XXLSC-XJB (JB Leak) I don't know if I have to use this XXLSA-XJB (JB Leak), or XXLS7-XJB (JB Leak), or any other I just download the first one.
Can anybody help me on how to instal the JB version of Android with CWM...
Thanks
:laugh:
Click to expand...
Click to collapse
Flash PhilZ kernel (Philz Safe Kernel 3.73 for XXLSC )
http://forum.xda-developers.com/showthread.php?t=1901191
Reboot recovery in to PhilZ kernel then you can make a full wipe and flash the JB of your choice. I recommend Ultimate Rom.
http://forum.xda-developers.com/showthread.php?t=1970626
Cassie's xtraLIite v11.1 AROMA and v6 supercharger scripts and way you go + lots more but that will came for u whenu want...
Flash kernel,rebot into recovery,wipe all,flash rom,reboot (might be good to fix premission in advance)
You can search for ultimate jb rom. Also you need to install hydracore kernel. I was able to install it and it works like a charm.
Sent from my GT-N7000 using Tapatalk 2
First I would recommend flashing an official Samsung ICS ROM with Odin. Then flash a safe kernel with CWM (ex. Speedmod or Hydracore), also through Odin or Mobile Odin. Once with a safe kernel, reboot into recovery, wipe everything using my guide below, then flash the JB ROM of your choice (put it in your external SD card before). I recommend Ultimate JB XXLSC.
http://forum.xda-developers.com/showthread.php?t=2024481
dear
The lastest "MaxFu_HydraCoreNirvana_n5.JBT.STD" kernel is it compatible with galaxy note on ICS Sotck ROM 4.0.4 ?
Or is only the older version "hydracore v7.6.2" ?
Thancks
(Sorry for my bad english).
tonio83 said:
dear
The lastest "MaxFu_HydraCoreNirvana_n5.JBT.STD" kernel is it compatible with galaxy note on ICS Sotck ROM 4.0.4 ?
Or is only the older version "hydracore v7.6.2" ?
Thancks
(Sorry for my bad english).
Click to expand...
Click to collapse
Please read the first post in MaxFu's thread. Especially chapter 4. Technical Description.
But you are really sure what you want to do? New member, first post - so I guess not very experienced.
You should know and read about the possibility to brick your device with ICS 4.0.4 stock. Please be careful.
Or better: switch to one of the Custom Roms (GB, ICS or JB, or CM or...). These are safe, you'll get good instructions how to install and excellent Roms to play with.
hi guys I have phone I gave information below.
I want to install a 4.2 rom which eat ram the lowest. if you offer a rom and show me how I can install I will be thankful.
4.0.4
1035.21_20121130
2.6.39.4
imm76l.l6-p990-p99030a.1211302332
p99030a
first you have to flash recovery it is necessary to flash any rom from zip files like any 4.2 rom for p990.
Hello everyone,
I am usnig Samsung Galaxy Note N7000, running CyanogenMod 11 latest nightly, Android 4.4.4.
I want to try MIUI ROM. But in the entire MIUI thread I havent been able to find any thread talking about how to Flash MIUI ROM on devices already running on Android 4.4.4 KitKat.
So can someone please guide me how flash my mobile with MIUI ROM.
Why should there be countless instructions for every version of all available Roms?
Simply follow the installation instructions given by the owner:
Installation:
- Download latest PhilZ N7000 kernel http://forum.xda-developers.com/show....php?t=1901191
- Make a Backup of your current rom
- Flash it
- Reboot recovery
- Make a Fullwipe (dont forget to wipe /preload )
- install the rom
ThaiDai said:
Why should there be countless instructions for every version of all available Roms?
Simply follow the installation instructions given by the owner:
Installation:
- Download latest PhilZ N7000 kernel http://forum.xda-developers.com/show....php?t=1901191
- Make a Backup of your current rom
- Flash it
- Reboot recovery
- Make a Fullwipe (dont forget to wipe /preload )
- install the rom
Click to expand...
Click to collapse
Thanks for speaking out something. But my question was, my mobile is already running on KitKat (Android 4.4.4) but the official developer version of MIUI for Galaxy Note N7000 is still on "Author: MIUI Official Team and Version: 3.2.22 （V4）" which is on Jellybean. So its actually downgrading. And before Installing KitKat I remember that there is a change how KitKat worked compared to Jellybean. So wont there be a different procedure while downgrading from KitKat to Jellybean??
Which is what I am unable to understand. So do tell me if there is a procedure to follow or any points to remember while downgrading from KitKat CM11 to Jellybean MIUI.