Problem with 4G - X 2014 Q&A, Help & Troubleshooting

Hi, I realized that when I turn off the 4G network data the phone changes to 3G, then if I turn on data again it turns 4G on after 20 seconds.
I had tried to use the *#*#4636#*#* method and put "LTE only", it works, but after I turn off data again the setting returns to GSM.
Other phones have 4G network ON don't matter if data is on or off.
There's a way to force 4G network all the time like the other phones have?

Well, like no one has the answer, I had found a workaround:
The app Intelli3g is the answer!

Related

Does 2G work on Telus with Milestone?

I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.
Wondering the same thing myself...
Does anyone knows the answer?
zeppelinrox said:
I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.
Click to expand...
Click to collapse
I am not certain about this (i use rogers), but i believe that telus has no 2G (edge) network. They built a 3G only network just in time for the olympics to replace their cdma network:
So the toggler probably cant find a valid connection and retries 3G.
Manual mode cant find a network at all.
On rogers, i can fallback to 2g. This is normal according to what i think i know.
Sent from my Milestone using Tapatalk
thanks for the info.
That's what I thought so have given up on the idea of getting 2g to work
I guess when it comes to 3g and saving battery life, juice defender will have to do as it can turn off data when the screen is off but still have the phone working.
Well, I think I made some progress with this.
On my phone, I was also loosing the connection when switching from 3G to 2G but it's working now. I can get calls, it's only the data aver 2G that doesn't work now.
I have the Cronos rom on my phone, I can tell you what I did if you're interested.
Yes please do.
If it works on cm6 then at least I can also save juice by not using juice defender... oh the irony... lol
edit: hey look at all them Canadian flags, eh?!
Sent from my Milestone using Tapatalk
Took me a lot of time to find the right switches combination.
Anyway, I have Toggle 2G auto managing the 2G/3G and for the bottom 2 options:
2G network: WCDMA preferred (3G/2G)
3G network: GSM auto (PRL)(2G/3G)
If I check under Setting/About/Phone/Status, I see written mobile network type UMTS.
Hmm... I had those 2 settings reversed when using toggly2g
I will try that.
Right now, my mobile network type shows up as HSPA.
Your post prompted me to find the difference and came up with these 2 useful pages just before my head exploded.
Awesome thread: http://www.howardforums.com/showthread.php/1600012-HSPA-vs.-UMTS
Handy chart at the bottom of http://en.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System
s0ulreaver said:
Well, I think I made some progress with this.
On my phone, I was also loosing the connection when switching from 3G to 2G but it's working now. I can get calls, it's only the data aver 2G that doesn't work now.
I have the Cronos rom on my phone, I can tell you what I did if you're interested.
Click to expand...
Click to collapse
Is this not the same then as just shutting off data?
Caz666 said:
Is this not the same then as just shutting off data?
Click to expand...
Click to collapse
Not sure but I don't think so. You can turn off the data but have the phone connected to the 3G network, right?
I think you could get data over 2G but it's just very slow, right?
With Telus I don't think they allow data over 2G.
zeppelinrox, I wonder why yours shows like this, what do you have active under those settings?
What ROMs are you guys using?
zeppelinrox said:
Hmm... I had those 2 settings reversed when using toggly2g
I will try that.
Right now, my mobile network type shows up as HSPA.
Your post prompted me to find the difference and came up with these 2 useful pages just before my head exploded.
Awesome thread: http://www.howardforums.com/showthread.php/1600012-HSPA-vs.-UMTS
Handy chart at the bottom of http://en.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System
Click to expand...
Click to collapse
When I'm on 2G it shows as UMTS
With 3G (mobile data enabled) I see it alternating from 3G/UMTS to H/HSPA.
I'm on CM6.
My phone always shows HSPA except if I set it to use 2G then it shows GPRS - which is when I have no data and no phone signal.
I did use the Telus baseband file in AOR though... I wonder how it will behave if I use the Canada baseband....
Also, here's a neat trick....
dial *#*#4636#*#*
A Testing App will show up....
Select Phone Information and then goto the bottom.
You can set your preferred Network type.
Ok so that listbox shows all the different options.
The only options that will save are:
GSM only (2g - I get nothing - shows as GPRS)
WCDMA only (3g - shows as HSPA)
GSM auto (PRL) - (3g - shows as HSPA as well)
All the other options either are not selectable or just revert back to GSM auto (as is the case with WCDMA preferred)
I just did a few speed tests and I seem to get faster speeds with GSM auto than I do with WCDMA only
Gonna try that Canada baseband now....
Edit: Same thing. Except the speed test is slower for both WCDMA and GSM autio so best off using the Telus baseband.
The dial trick doesn't work. I dial the sequence as a phone number, right?
It disappears then nothing changes.
ah.. yeah sometimes it takes 2 or 3 tries...
do you use adw launcher?
If so, you can actually create a shortcut for it... I figured it out today.
1 Press and hold on homescreen and select Custom shortcut
2 Press "Pick your activity"
3 Select the second item on the list ie. Activities (with the ADW icon)
4 Wait for all stuff to load, scroll down to Settings, and press the arrow next to it to see the long list of activites that Settings.apk can do.
5 Scroll down near the end of the list, you will see Testing(.TestingSettings)
6. Select that and press OK on the next window.
I also made one for Battery History, which is actually part of the Testing app but is usually only accessible through Spare Parts.
I still can't get the trick to work... doesn't do anything on my phone
Right now I'm on the 2501 rom (latest 2.2.1 from Motorola) and I can say it's the best I've tested so far!
Outstanding battery life!
I found another way to run Testing App.
With Google gesture search you can set it to launch Settings actions
Let it scan and then write "testing" on the screen
Edit: oh crap I mistyped the code.
Its *#*#4636#*#*
I had 4536 before so I fixed it
Sent from my Milestone using Tapatalk
zeppelinrox said:
I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.
Click to expand...
Click to collapse
Well, after doing some more tests and trying different apps (2G/3G switchers) I can say those apps work only if your cell phone company has both 2G/3G network.
In Montreal, only Rogers has both.
Easy to test (btw: I'm using the FroyoMOD rom): go in "Settings" -> "Wireless & Networks" -> "Mobile Network Settings" and check "Use only 2G networks".
See if your cell phone company is listed when you do a search under "Network Operators". If it's not, don't bother using a 2G/3G switcher.
When doing this, in Montreal I see only Rogers listed. If I uncheck "Use only 2G networks" I see all 3 of them: Bell, Telus and Rogers.
Hope this helps!

[Q] LTE/3G switch issue

Hi, I have an F340L and from the hidden menu I've set the Data connection to Global+LTE. When I'm in an LTE area the phone automatically connects to the 3G network and not to 4G. In order to make a 4G connection I have to enter the hidden menu, set it to LTE only, the device reboots and then the LTE connection is possible. Why is that? I mean why the device prefers 3G in an LTE area and needs the above procedure. Is there anyway to bypass that without a reboot or even automatic 4G connection? Any workaround, input or comments are welcome.

[Q] Tmobile data problem

I have a sprint HTC one unlocked to run on T-mobile. I live in south west Washington, and I am having a very strange issue with my data. I select a data mode from the *#*#4636#*#* menu, and about half the time I connect to data. The other half of the time, it stays on UMTS, and no gsm logo pops up next to the signal. Other times, I will go to HSDPA, and have a very speedy data connection. Is there any way to disable UMTS? Could this be a rom issue, or a APN issue? I can almost always get an edge connection, but HSDPA is much better to use. I have done the R-UIM patch. I'll try to answer any questions, but I dont have tmobile service at my house, so I cant be sure
spibbly said:
I have a sprint HTC one unlocked to run on T-mobile. I live in south west Washington, and I am having a very strange issue with my data. I select a data mode from the *#*#4636#*#* menu, and about half the time I connect to data. The other half of the time, it stays on UMTS, and no gsm logo pops up next to the signal. Other times, I will go to HSDPA, and have a very speedy data connection. Is there any way to disable UMTS? Could this be a rom issue, or a APN issue? I can almost always get an edge connection, but HSDPA is much better to use. I have done the R-UIM patch. I'll try to answer any questions, but I dont have tmobile service at my house, so I cant be sure
Click to expand...
Click to collapse
You can't "disable" UMTS. From my tests on this variant of the One, setting it to "GSM auto (PRL)" will get me on HSPA. It will keep me on HSPA until the network kicks me off. (Fast Dormancy, it puts you down to UMTS when you aren't actively using data to conserve energy.) [Maybe you can disable Fast Dormancy, who knows.]

4G not enabled when wi-fi is on

HI all,
On february 16 my provider network SFR (French in Paris) had some issues, I lost my gsm and 4G and since I can't turn on 4G and Wi-Fi on my HTC at the same time as I used to do before, now the 4G icon disappear when the Wi-Fi is turned on and I can read " Use my data plan when Wi-Fi isn't available" instead of "connected".
It seems that the 4G is in sleep mode, the icon comes again and data "connected" if I receive or send a MMS then disappear again.
If the wi-fi is turned off, I have the data "connected" with the 4G icon, as usual.
I have reset the SFR apn, still same, I have contacted their support, they say that it's normal for a smartphone to use Wi-Fi and not 4G all together, but I did when i wanted !
Now I can't, is any of u had this problem, know the cause and how to solve it?
Thank u in advance.
Do you have an option of automitically connect to 4G when wi-fi is poor turned on? It is in wi-fi's advanced options

Problem data leaving WIFI

Greetings friends, someone will have problem with the data after leaving a WIFI network? I have to turn off mobile data to activate the 3G, this device does not mark H +. and searched information everywhere and I get nothing on this issue. please help!
i configured correctly APN, the problem is when I leave a WIFI network to network DATA, I have to put it in airplane mode, several times to grip the data network, I have a question? This phone does not mark H +? I appears in the device information HSPAP(H+), but only get the 3g icon.
Thank you
loboxkilla92 said:
Greetings friends, someone will have problem with the data after leaving a WIFI network? I have to turn off mobile data to activate the 3G, this device does not mark H +. and searched information everywhere and I get nothing on this issue. please help!
i configured correctly APN, the problem is when I leave a WIFI network to network DATA, I have to put it in airplane mode, several times to grip the data network, I have a question? This phone does not mark H +? I appears in the device information HSPAP(H+), but only get the 3g icon.
Thank you
Click to expand...
Click to collapse
See screenshots at: http://forum.xda-developers.com/r1-hd/help/dual-sim-issues-t3426120
Icon labeled 4GLTE when LTE is connected, but just R (registered?) for HSPA+, whether connected or not.
Is data turned on at Settings/Data usage?
At Settings/More/Cellular networks/ is Preferred network type set to 3G/4G? Maybe it's looking for LTE.
Mine goes directly to whichever network data is turned on when I turn off wifi.
What kind of sim are you using?
limpet said:
See screenshots at: http://forum.xda-developers.com/r1-hd/help/dual-sim-issues-t3426120
Icon labeled 4GLTE when LTE is connected, but just R (registered?) for HSPA+, whether connected or not.
Is data turned on at Settings/Data usage?
At Settings/More/Cellular networks/ is Preferred network type set to 3G/4G? Maybe it's looking for LTE.
Mine goes directly to whichever network data is turned on when I turn off wifi.
What kind of sim are you using?
Click to expand...
Click to collapse
Cellular data connection status doesn't show in the status bar. I'm using freedompop 3G for the moment. See the screenshot.
limpet said:
See screenshots at: http://forum.xda-developers.com/r1-hd/help/dual-sim-issues-t3426120
Icon labeled 4GLTE when LTE is connected, but just R (registered?) for HSPA+, whether connected or not.
Is data turned on at Settings/Data usage?
At Settings/More/Cellular networks/ is Preferred network type set to 3G/4G? Maybe it's looking for LTE.
Mine goes directly to whichever network data is turned on when I turn off wifi.
What kind of sim are you using?
Click to expand...
Click to collapse
greetings, in my country is not available currently the 4g lte network, and put on 3G/4G, 2G only, 2G/3G/4G and 2G/3G/4G LTE and the problem continues, I have to put the airplane mode or restart cell to grab data.
the only solution I can find is put always active mobile data in programmer Options. but it consumes a lot of battery.
loboxkilla92 said:
greetings, in my country is not available currently the 4g lte network, and put on 3G/4G, 2G only, 2G/3G/4G and 2G/3G/4G LTE and the problem continues, I have to put the airplane mode or restart cell to grab data.
the only solution I can find is put always active mobile data in programmer Options. but it consumes a lot of battery.
Click to expand...
Click to collapse
Always active seems to be the default. It's on in my phone and I never changed it.
In Settings/Battery is Standby intelligent power saving on? When on I get about 1.5% per hour standby.
The "R" is Roam I believe. You might want to look at your APN and Network Operator settings. If your phone is roaming, it is going to burn battery. Maybe try turning off Roaming?
When you go to Settings -> Battery and then tap the graph, and it will show you metrics in RYG for Cellular Network Signal, Wifi, Awake, etc. What does your "Cellular Network Signal" look like?
Freedompop roams on att and t mobile (it's a global sim card) I had the lg g4 before this and I was able to choose which I would be on, now if I try to manually connect all available networks are "freedompop" then it says roaming ("R") is status bar, on my g4 it would have an "H"
Any app to get more details on my options and what I'm connected to?
Sent from my R1 HD using Tapatalk
moshiach101 said:
Freedompop roams on att and t mobile (it's a global sim card) I had the lg g4 before this and I was able to choose which I would be on, now if I try to manually connect all available networks are "freedompop" then it says roaming ("R") is status bar, on my g4 it would have an "H"
Any app to get more details on my options and what I'm connected to?
Sent from my R1 HD using Tapatalk
Click to expand...
Click to collapse
I use freedompop in Sim 2 and set it has preferred sim for data. I use slot one for calls and text via h2o wireless a at&t mvno, be sure to edit the apn for sim 2
Name: FreedomPop
APN: freedompop.foggmobile.com
APN Type: Default,Supl,net
MCC: 234
MNC: 20
click on menu and save and back, then make sure to select FreedomPop and go back to home screen, now try it.
Kevinreid1 said:
I use freedompop in Sim 2 and set it has preferred sim for data. I use slot one for calls and text via h2o wireless a at&t mvno, be sure to edit the apn for sim 2
Name: FreedomPop
APN: freedompop.foggmobile.com
APN Type: Default,Supl,net
MCC: 234
MNC: 20
click on menu and save and back, then make sure to select FreedomPop and go back to home screen, now try it.
Click to expand...
Click to collapse
Thanks but that's not what I mean,
On other phones it was fine on the "BLU R1 HD" it only roams and I can't choose between att and TMO
Sent from my R1 HD using Tapatalk
I'll post some screenshots of my settings when I figure out how....
Kevinreid1 said:
I'll post some screenshots of my settings when I figure out how....
Click to expand...
Click to collapse
What I'm trying to do is with the FREEDOMPOP sim card choose which the phone should roam on between att or TMO all I can choose from is a list of "FreedomPop" but it's not saying which is roaming on
(Other phones you can choose)
I believe one set is att and the other TMO but how can I know (see there are two sets, two of each 2g 3g 4g)
May I ask why it matters which one it roams on? i'd just turn of the advanced lte and not worry about if it was t-mobile or at&t it will pick the strongest signal and connect to it. but there apps that can help you figure out what network and who's your actually using.

Categories

Resources