Dear All,
Two days before , I brought the HTC One (32 GB Golden) which on digging the Phone identity came to know the Model no 831C, later after goggling it came to know that I belongs to Sprint Carrier.
On inserting the code of Hardware components, I found few test/s were not passed and worked normally, other issues are TV app is not recognizing the server, Double Tap Screen wake/sleep works depending on its mood, vDM Client error pops up often.
Request all the experts here to please help me out with the Solution as to how can I make it work flawlessly.
Regards
Karan Adhikari
karan_adhikari said:
Dear All,
Two days before , I brought the HTC One (32 GB Golden) which on digging the Phone identity came to know the Model no 831C, later after goggling it came to know that I belongs to Sprint Carrier.
On inserting the code of Hardware components, I found few test/s were not passed and worked normally, other issues are TV app is not recognizing the server, Double Tap Screen wake/sleep works depending on its mood, vDM Client error pops up often.
Request all the experts here to please help me out with the Solution as to how can I make it work flawlessly.
Regards
Karan Adhikari
Click to expand...
Click to collapse
1) Which tests didn't pass ?
2) Which ROM are you using ?
3) TV app is discontinued by HTC (HTC suggests "Peel Smart Remote")
4) Double Tap Screen Wake works only when you lift up phone and proximity is not blocked (5 seconds cooldown between trying again).
Double tap status bar sleep is buggy on lollipop (this can be different if you have custom kernel)
5) disable vDM client app to prevent popups (you should also disable other sprint apps like HtcSprintService and Self Service SZ)
First of all, thank you for addressing my query & sorry for delay in revert.
Sir, I do know it’s the Sprint phone, as far your concern on below questions, let me try to answer them as below:
1) Which tests didn't pass?
When I run the all functions test by this code (*#*#3424#*#*) in one of the test the error word in green / red appears on screen
2) Which ROM are you using?
I believe it’s the Custom ROM, which would have be provided by Sprint. Software no is 1.54.651.8
3) TV app is discontinued by HTC (HTC suggests "Peel Smart Remote")
No comments, will try to search the PSR on play store.
4) Double Tap Screen Wake works only when you lift up phone and proximity is not blocked (5 seconds cooldown between trying again).
Will strictly follow next time when I do it.
Double tap status bar sleep is buggy on lollipop (this can be different if you have custom kernel)
Its on Android KK 4.4.2
5) disable vDM client app to prevent popups (you should also disable other sprint apps like HtcSprintService and Self Service SZ)
I didn’t find the option to disable vDM app nor did I found other apps of sprint. May I request you to suggest any alternates for it ?
Now, sir my other query is Is it advisable to flash a latest LP rom (i.e Goggle play edition or the rom developed by Bad boys team here) , also it seems that I am S-ON, because when I enter the bootload screen Power + Vol Down key where three android icon at bottom appears , I read LOCKED at the very top of the screen.
Pl. suggest whether it shall be advisable to do it if so request you to suggest the best ROM which shall run flawless in India.
Thanking you in anticipation.
Regards
Karan
Can somebody help me out with this please.. ??
The snapshots of my device are attached hereby, my only query is, and considering the attached images of device can I flash a Custom ROM on to it? Will that be advisable to do so? Are there the chances to Brick the device.
If the answer according to all the Experts here lies in assertive, which ROM is best, since this is a Sprint Device, I have found on the forum that Badboyz rom shall go flawless with any Sprint device, so may I go ahead with it. I am in India presently so wish that all the apps i.e Remote TV, Radio should run properly.
Regards
Karan Adhikari
karan_adhikari said:
The snapshots of my device are attached hereby, my only query is, and considering the attached images of device can I flash a Custom ROM on to it? Will that be advisable to do so? Are there the chances to Brick the device.
Click to expand...
Click to collapse
You need to delete the second and third pictures, there is way to much personal information in there.
The "Locked" at the top of the screen in the bootloader means that the bootloader is locked. If you look directly underneath it you'll see that it says "S-Off". To flash custom recoveries or roms or anything, you need the bootloader unlocked. You can do this using HTCDev, or since you're soff, you can unlock it via adb.
Once you're bootloader is unlocked, you should be set for everything. Flash a custom recovery like Captain Throwback's custom TWRP, get root if you don't have it already, update your firmware, etc. The bad boys xda page has most of this stuff in it.
Note: Your phone is supercid, so you're not limited to just sprint roms.
---------- Post added at 10:31 AM ---------- Previous post was at 10:04 AM ----------
Also, just wondering what exactly were the tests that failed when you did *#*#3424#*#* ?
Thanks a lot sir, I am grateful to you, I have followed you instruction of deleting the images.
Now, last night I did the Factory Hard reset (P+V-DN keys), it went fine, except the data was erased which I never wanted to be backed up though I was haunting of loosing the Sim Lock, but all went fine.
I have my registration on HTCDEV too, and the process of obtaining the TOKENID should go without any hassles.
Now in pursuant to your advise below, will it still be mandatory to unlock the bootloader ? or I may follow the process of wipe/data and then immediately flash the BB's Rom ?
Further, I stand corrected that all the function tests are passed normally, it was my mistake of not placing the Handset on the plain surface while performing one of the test.
Finally, why the model no in phone identity says 831C, and not M8 - May I request your views on this please?
Thanking you once again for addressing, all you guys are rocking, I am here on this forum since 2008, and needless to say "A Proud Member"
All my Best wishes to MEMBERS.
With Regards
K.B. Adhikari
ssantos132 said:
You need to delete the second and third pictures, there is way to much personal information in there.
The "Locked" at the top of the screen in the bootloader means that the bootloader is locked. If you look directly underneath it you'll see that it says "S-Off". To flash custom recoveries or roms or anything, you need the bootloader unlocked. You can do this using HTCDev, or since you're soff, you can unlock it via adb.
Once you're bootloader is unlocked, you should be set for everything. Flash a custom recovery like Captain Throwback's custom TWRP, get root if you don't have it already, update your firmware, etc. The bad boys xda page has most of this stuff in it.
Note: Your phone is supercid, so you're not limited to just sprint roms.
---------- Post added at 10:31 AM ---------- Previous post was at 10:04 AM ----------
Also, just wondering what exactly were the tests that failed when you did *#*#3424#*#* ?
Click to expand...
Click to collapse
karan_adhikari said:
I have my registration on HTCDEV too, and the process of obtaining the TOKENID should go without any hassles.
Now in pursuant to your advise below, will it still be mandatory to unlock the bootloader ? or I may follow the process of wipe/data and then immediately flash the BB's Rom ?
Click to expand...
Click to collapse
Yes, you still need to unlock the bootloader. After that you need to flash a custom recovery.
After doing these two you will be able to flash a custom rom, just make sure you follow all the instructions on the BB rom page
ssantos132 said:
Yes, you still need to unlock the bootloader. After that you need to flash a custom recovery.
After doing these two you will be able to flash a custom rom, just make sure you follow all the instructions on the BB rom page
Click to expand...
Click to collapse
Thanks once again. I am planing to adopt the process of unlocking the bootloader , via HTCDEV and then for flashing the custom Rom, shall seek your guidance hope you won't mind if I bother you for it.
Best Wishes
Karan
Hi ssantos132,
I found there is a SuperSU app preinstalled on my Handset, which prompts me to Grant access when I try to install some other apps from PS- goggle, is my device rooted, because I have found in this link (http://blog.laptopmag.com/root-htc-one-m8), wherein lastly the SuperSU app gets installed automatically.
Pl. guide.
Thanks
Yeah, it looks like you already have root. Try downloading a root checker app from the play store if you want to make sure.
ssantos132 said:
Yeah, it looks like you already have root. Try downloading a root checker app from the play store if you want to make sure.
Click to expand...
Click to collapse
Well thanks for replying. I did that earlier, it says Congratulation your device is rooted. So now when we have concluded that my device is Rooted, the only thing left to be done is, flashing a Custom recovery thru TRWP or CWM right ? Incase if its already been rooted and say if I re-do it, any risk for Device?
Pl. guide.
With Regards
Karan
karan_adhikari said:
Well thanks for replying. I did that earlier, it says Congratulation your device is rooted. So now when we have concluded that my device is Rooted, the only thing left to be done is, flashing a Custom recovery thru TRWP or CWM right ? Incase if its already been rooted and say if I re-do it, any risk for Device?
Click to expand...
Click to collapse
Yeah, once the bootloader is unlocked you can flash a custom recovery then a rom. You can't flash a custom recovery through TWRP or CWM though. Download a custom recovery then use fastboot flash recovery recovery recovery.img
Believe me, That is one rare cellphone you have got.
I am having the same and as I tried few roms, without backing up the radio and replaced it with some random one. Now my phone is just a toy to play with.
I ll suggest you to stick with the rom you are having right now, Take a nandroid backup of the rom, radio and everything else. and keep it safe for future. You will never be able to find them online for this particular phone.
If you would like to help me solve my phone's issue, Please upload the radio. My phone is just laying around in my desk as I have no way to get it to work.
karan_adhikari said:
Dear All,
Two days before , I brought the HTC One (32 GB Golden) which on digging the Phone identity came to know the Model no 831C, later after goggling it came to know that I belongs to Sprint Carrier.
On inserting the code of Hardware components, I found few test/s were not passed and worked normally, other issues are TV app is not recognizing the server, Double Tap Screen wake/sleep works depending on its mood, vDM Client error pops up often.
Request all the experts here to please help me out with the Solution as to how can I make it work flawlessly.
Regards
Karan Adhikari
Click to expand...
Click to collapse
I know about these devices that are being sold in India. I bought a used phone on OLX having same model number with the exact similar problems. I assume these devices are development only devices which don't run a final version of software. I have noticed that most of the issues in the phone are software related. Using my development expertise, I was able to fix most of the problems and upgrade the firmware to Lollipop, however I have messed up the radio and was unable to restore the radio firmware to anything that actually works (This phones come with a radio version that can't be obtained from any online source). If you can provide the radio image from your device, I will prepare a flashable zip to upgrade the firmware to Lollipop which would include the modem you provide, along with instructions on how to unlock the device and flash it to get going. Probably this would iron out the issues that you are facing with your device.
To grab the radio image from your device, use the following command from "adb shell" or Terminal Emulator
Code:
$ su
# dd if=/dev/block/mmcblk0p20 of=/sdcard/radio.img
You will find a file in the sdcard (Internal) named radio.img. Please upload it and provide me with a link.
I would advice you not to make any changes to the device until I provide you with clear instructions on how to do so. Trust me, I really had a hard time with this phone.
Well thanks indeed for the time you took for replying, Sir are you from India Since the name sounds such ?
Secondly, I am desperately looking to upgrade the Software to Latest 5.02 Lollipop from present Kitkat, my basic requirement is that any ROM to which I flash should at least contain the Stock FM Radio, wherein it should be able to tune in the Indian Radio Station.
Confusing issues which keep me scratching my head is that I have pre installed SuperSU app in it. Also I re checked it via installing the app Root Checker which indicated that my device is Rooted. However as and when I tried my device to restart it in Recovery mode it starts normally after a while , the SuperSU app is not getting started.
Can you help me through please. Favor me with (1) Do I need to unlock the Bootloader ? (2) Do I need to flash the custom recovery thru TRWP or CWM ? (3) suggest best Rom which will working with FM Radio (4) A Layman's User Guide to carry out all the process.
Thank You once again.
Regards
Karan Adhikari
dhiru1602 said:
I know about these devices that are being sold in India. I bought a used phone on OLX having same model number with the exact similar problems. I assume these devices are development only devices which don't run a final version of software. I have noticed that most of the issues in the phone are software related. Using my development expertise, I was able to fix most of the problems and upgrade the firmware to Lollipop, however I have messed up the radio and was unable to restore the radio firmware to anything that actually works (This phones come with a radio version that can't be obtained from any online source). If you can provide the radio image from your device, I will prepare a flashable zip to upgrade the firmware to Lollipop which would include the modem you provide, along with instructions on how to unlock the device and flash it to get going. Probably this would iron out the issues that you are facing with your device.
To grab the radio image from your device, use the following command from "adb shell" or Terminal Emulator
Code:
$ su
# dd if=/dev/block/mmcblk0p20 of=/sdcard/radio.img
You will find a file in the sdcard (Internal) named radio.img. Please upload it and provide me with a link.
I would advice you not to make any changes to the device until I provide you with clear instructions on how to do so. Trust me, I really had a hard time with this phone.
Click to expand...
Click to collapse
I will try to help you out definitely, once i am out of my confusion, of taking the Nandriod back up, I will try to upload the img file so your problem is hopefully solved
Thanks
gjmptw said:
Believe me, That is one rare cellphone you have got.
I am having the same and as I tried few roms, without backing up the radio and replaced it with some random one. Now my phone is just a toy to play with.
I ll suggest you to stick with the rom you are having right now, Take a nandroid backup of the rom, radio and everything else. and keep it safe for future. You will never be able to find them online for this particular phone.
If you would like to help me solve my phone's issue, Please upload the radio. My phone is just laying around in my desk as I have no way to get it to work.
Click to expand...
Click to collapse
(1) Do I need to unlock the Bootloader ?
YEs, you must unlock it. It won't affect the phone's basic functunalities
(2) Do I need to flash the custom recovery thru TRWP or CWM ?
Yes. I recommend twrp.
(3) suggest best Rom which will working with FM Radio
None for the phone we are using A Layman's User Guide to carry out all the process.
Please don't upgrade the rom as it might mess with the boot("radio") . Upload your radio and wait for Dhiru's post.
thanks, where shall I get the Radio file please ?
gjmptw said:
(1) Do I need to unlock the Bootloader ?
YEs, you must unlock it. It won't affect the phone's basic functunalities
(2) Do I need to flash the custom recovery thru TRWP or CWM ?
Yes. I recommend twrp.
(3) suggest best Rom which will working with FM Radio
None for the phone we are using A Layman's User Guide to carry out all the process.
Please don't upgrade the rom as it might mess with the boot("radio") . Upload your radio and wait for Dhiru's post.
Click to expand...
Click to collapse
Mr. Dhiru,
Pl intervene and guide me on how do I take the back up and upload the Radio file. So far what I understood is that TWRP toolkit from sites like Rootjunky and follow the youtube video uploaded for it and instal the TWRP and back the radio file and then upload them here for your needful
Pl. guide whether is understanding is correct or not ?
Thanks
karan_adhikari said:
Well thanks indeed for the time you took for replying, Sir are you from India Since the name sounds such ?
Secondly, I am desperately looking to upgrade the Software to Latest 5.02 Lollipop from present Kitkat, my basic requirement is that any ROM to which I flash should at least contain the Stock FM Radio, wherein it should be able to tune in the Indian Radio Station.
Confusing issues which keep me scratching my head is that I have pre installed SuperSU app in it. Also I re checked it via installing the app Root Checker which indicated that my device is Rooted. However as and when I tried my device to restart it in Recovery mode it starts normally after a while , the SuperSU app is not getting started.
Can you help me through please. Favor me with (1) Do I need to unlock the Bootloader ? (2) Do I need to flash the custom recovery thru TRWP or CWM ? (3) suggest best Rom which will working with FM Radio (4) A Layman's User Guide to carry out all the process.
Thank You once again.
Regards
Karan Adhikari
Click to expand...
Click to collapse
Required advice pl. help somebody
Pl. advise as on which TWRP img file should I take into consideration for flashing, since my boot loader is old one the firmware no 4096, Software no is 1.54.651.8, and its sprint 831C (HTC ONE m8). I yesterday tried with the the latest 2.80 twrp img file but got stuck on "Entering Recovery" Screen, some how could manage to come back by Power+Vol up and when the screen got black then Vol Down which took me to boot-loader and then came back by reseting phone. Now the phone is working normal.
I am desperately looking to install CWM or TWRP , so that can take an nandroid backup of the system file, and later post it for the experts here to update the firmware and fix other issues......
snaps of device are attached here
Request all experts to kindly guide me here on it.
Thanking you in anticipation
Karan Adhikari
karan_adhikari said:
Mr. Dhiru,
Pl intervene and guide me on how do I take the back up and upload the Radio file. So far what I understood is that TWRP toolkit from sites like Rootjunky and follow the youtube video uploaded for it and instal the TWRP and back the radio file and then upload them here for your needful
Pl. guide whether is understanding is correct or not ?
Thanks
Click to expand...
Click to collapse
Related
I tried to unlock my bootloader, following various guides, and kept getting stuck on the "Download Mode !!!" part. I just want to install the latest stable version of Cyanogenmod on my phone since the stock ROM is being a real pain for me (very slow and unresponsive).
I have:
Android 4.1.2
Build Number: JZ054K
Software Version: AME-XXX
I read online that you need the Euro firmware to unlock the bootloader, can I flash the euro firmware and will it mess with my service? I'm confused as to how the firmware affects things since I've read conflicting information. I didn't flash my firmware a few hours before trying to unlock, so maybe that's the problem?
Seriously?
There aren't enough threads and guides for you to read already? Everything you need is already out there on this forum so why start another thread just because you are too lazy to search and read for yourself?
I have read around and have tried a number of guides a number of times. They haven't worked for me and I'm just wondering what i'm doing wrong. Even though all the information is out there, I don't have the experience to understand it apparently. I've spent hours trying to figure things out but i keep reading conflicting info and half-explained steps and now I'm just confused and would like a clear point in the right direction.
So, do i need to reflash the latest firmware, wait a few hours, then try again on a full charge? Or do i need a euro firmware? Which guide should i follow?
I've downloaded a few applications and driver packages and whatnot but if those could possibly conflict with each other and cause problems i could work with a fresh OS. I'm running OS X but i have linux VMs and friends with clean windows installs (mine is all sorts of messed up)
eatfoodnow said:
I tried to unlock my bootloader, following various guides, and kept getting stuck on the "Download Mode !!!" part. I just want to install the latest stable version of Cyanogenmod on my phone since the stock ROM is being a real pain for me (very slow and unresponsive).
I have:
Android 4.1.2
Build Number: JZ054K
Software Version: AME-XXX
I read online that you need the Euro firmware to unlock the bootloader, can I flash the euro firmware and will it mess with my service? I'm confused as to how the firmware affects things since I've read conflicting information. I didn't flash my firmware a few hours before trying to unlock, so maybe that's the problem?
Click to expand...
Click to collapse
It isn't a question of firmware, the phone needs to have an unlockable bootloader to be able to be, well, unlocked. Here is a list http://forum.xda-developers.com/showthread.php?t=2181581 of P880 bootloader versions. Follow the guide to check which BL your phone has.
Thats obsolete, all versions can be unlocked afaik, either with official method or by fuse editing. No need to keep sim card in,you just need proper drivers
Oh, OK, I didn't know that. But, even better, OP should not have any trouble, provided he follows the BL unlock guide here http://forum.xda-developers.com/showthread.php?t=2224020
Maybe his BL is already unlocked OR is relocked (meaning can't be unlocked anymore).
Its more likely that his drivers are messed up imo.
The fuse editing method should work for everyone, i recommend you give it a try
So the fuse method would be the "BL-unlock.bat" method on that bootloader unlock forum post? I've tried it before, but I'll try it again. The directions only say to run it, is there anything else I need? Now, since it's a .bat file I absolutely have to run it on Windows, right? Because if so I'll use a friend's computer instead of my windows installation.
What are the necessary installations before I run the file? How should I configure settings on my phone? (like what type of usb connection should it be)
There are a lot of things that people expect readers to know but I'm really not very knowledgeable about standard practices for phone stuff so I really need every step. Thanks for helping!
Since its.bat file, you can open it in text editor to see which commands it executes. I'd still recommend to do it on windows machine, other OSs may work but aren't tested.
You need abd & fastboot drivers, plus drivers for our device. It's been a while since I've done it, but afaik you can get proper device drivers via lg support tool.
Flying_Bear said:
Since its.bat file, you can open it in text editor to see which commands it executes. I'd still recommend to do it on windows machine, other OSs may work but aren't tested.
You need abd & fastboot drivers, plus drivers for our device. It's been a while since I've done it, but afaik you can get proper device drivers via lg support tool.
Click to expand...
Click to collapse
Also, correct me if i'm wrong I only had stock for 2hours, but also stock needs usb debugging to be enabled or adb won't work?
Yep, afaik usb debugging needs to be enabled
When you are fast enough, it is possible in charging mode wihle the carger animation is shown. But you have install adb driver very fast...
So I'm pretty sure I got the bootloader unlocked, I ran the .bat file and it went through everything until the part where it checks to see if my bootloader is unlocked, it just froze forever, so I closed it.
How should I go about checking?
Also, what would be my next step now for installing CM10.1.3? I tried to follow the guide on the cyanogenmod wiki (install_CM_for_p880) (I can't post links yet)
...but ran into problems with pushing it into root with adb. It said I didn't have permissions, so I googled some stuff, but just got myself confused.
Thanks for all the help btw!
eatfoodnow said:
So I'm pretty sure I got the bootloader unlocked, I ran the .bat file and it went through everything until the part where it checks to see if my bootloader is unlocked, it just froze forever, so I closed it.
How should I go about checking?
Also, what would be my next step now for installing CM10.1.3? I tried to follow the guide on the cyanogenmod wiki (install_CM_for_p880) (I can't post links yet)
...but ran into problems with pushing it into root with adb. It said I didn't have permissions, so I googled some stuff, but just got myself confused.
Thanks for all the help btw!
Click to expand...
Click to collapse
you can check your bl status by entering sw mode (phone off, hold vol+ and insert charger) or reeboting into bl (adb reboot oem-unlock)
to install cm steps are:
-install recovery (you can choose either cwm or twrp, it's more about looks than functions)
-download rom zip onto sd card
-install said zip from said recovery, there's no adb involved
Now my personal opinion, I really don't see the point in flashing 10.1, i would go staright for cm11 if i were you
Ok well I think I got things together more or less, eventually I tried to install CM10.1 with the ROM manager app. I forgot to select the options to wipe my data partitions and now I'm stuck in an endless boot loop every time I turn the phone on. I tried to boot from my backup using CWM which I made with the app prior to trying to install, and it gave me an error about an MD5 checksum failing, no matter what I tried. Should I do the factory reset/wipe option with CWM now? What's my best option.
Also why would you recommend CM11 over CM10.1? I don't want to have to deal with a nightly, all this phone stuff is a supreme headache to me.
eatfoodnow said:
Ok well I think I got things together more or less, eventually I tried to install CM10.1 with the ROM manager app. I forgot to select the options to wipe my data partitions and now I'm stuck in an endless boot loop every time I turn the phone on. I tried to boot from my backup using CWM which I made with the app prior to trying to install, and it gave me an error about an MD5 checksum failing, no matter what I tried. Should I do the factory reset/wipe option with CWM now? What's my best option.
Also why would you recommend CM11 over CM10.1? I don't want to have to deal with a nightly, all this phone stuff is a supreme headache to me.
Click to expand...
Click to collapse
Factory reset then get nandroid manager app and see if you can restore your stuff with that
CM11 is bugless atm and performance (imo) is way superior
So after a factory reset/data wipe, my phone just booted into CM10.1 and now that's working. And it looks like all of my stuff on the phone is still there (though of course apps aren't installed and whatnot, that wouldn't make sense). Thanks for all the help!
I tried to find a feature list or something to see what exactly is better about CM11, and found out that "stable" doesn't exactly mean stable for CM, and that it looks like a good idea to update, so I think I will try to update to that. Do you know anywhere that has an actual feature list to show me what CM11 does that CM10.1 doesn't?
So.. if I missed any posts dealing with this, please forgive me. I am a total noobie at this hobby so I'm not really familiar with all the acronyms or terminology thrown around. I have an M8 HK, I rooted the phone using Opensourcegangster's youtube video. I was able to wi-fi tether no problem. All was good for a few days until the 1.54.654.13 update tried to come through. OK, so the rooted phone wouldn't update the phone, because of the root? I understand that and it kept asking to update. I didn't have time to do update the phone and it asked every 2 hours for days, Now, the phone has stopped asking to update but has also started dropping every call after 10 sec even though signal strenghth seems to be strong and now won't connect to 3G or LTE data. I don't know if any of this is related or if I can even go to a store for help because of the root.
Thanks in advance
chinrednek said:
So.. if I missed any posts dealing with this, please forgive me. I am a total noobie at this hobby so I'm not really familiar with all the acronyms or terminology thrown around. I have an M8 HK, I rooted the phone using Opensourcegangster's youtube video. I was able to wi-fi tether no problem. All was good for a few days until the 1.54.654.13 update tried to come through. OK, so the rooted phone wouldn't update the phone, because of the root? I understand that and it kept asking to update. I didn't have time to do update the phone and it asked every 2 hours for days, Now, the phone has stopped asking to update but has also started dropping every call after 10 sec even though signal strenghth seems to be strong and now won't connect to 3G or LTE data. I don't know if any of this is related or if I can even go to a store for help because of the root.
Thanks in advance
Click to expand...
Click to collapse
In order to accept an OTA update, such as the one trying to come through on your phone, you need to have stockish Sense Rom and the Stock Recovery. I haven't seen the video you mentioned but if your method of rooting involved installing a custom recovery this is likely why your update is failing. Your phone will reboot, enter your custom recovery, attempt to run the script, fail, rinse and repeat until you revert to stock recovery. Lucky for you rooting is really easy to undo, all you need to do is grab the stock recovery for your HK (I pulled the one out of the .9 RUU that's up at another link, i'll try to post it for you in a minute), and then reboot to fastboot (this requires the android SDK and administrator level command window - shift+right click the folder fastboot.exe is in and select open command window here). Then to flash it type "/fastboot flash recovery recovery.img" with no quotes and make sure you have the recovery in the same folder as fastboot. Give me a few minutes here and ill give you the recovery.img file you need.
Here is the link for the M8 HK stock recovery: http://rg.to/file/8e32e8cc37ac93d3f0206994f1c7a59b/recovery.img.html
That should be all you need to either a) accept the OTA (there are other methods of getting this update since you're rooted btw) or b) visit a sprint store and have them check over your phone.
As I suffered data loss on my first HK and no matter what could not fix it I suggest going with the lengthier method of getting the update as I've listed it above so that you can go in and get your phone checked out.
Oh, the bootloader.... so there is another step to take if you want to appear 100% unmodified and this step should be completed before you unroot...
I followed this method and had a Sprint technician run tests on my phone later that day and had 0 issues getting a replacement device...
It's a bit much to go into so I'm just going to link you to the forum page I followed: http://forum.xda-developers.com/showthread.php?t=2710503
You will need to grab the "Faux Locked Hboot" for Sprint near the bottom of the first post and then follow the instructions listed prior to it in the top section.
EDIT: It just occurred to me that you are S-ON, yes? The phone I did this with was S-OFF so I'm not 100% certain it will work for you. Can anyone else confirm that you can flash a modified Hboot in rebootRUU state being S-ON? Or perhaps have another method of making the bootloader say Locked and not Relocked as "/fastboot oem lock" results in?
#1-"com.tmobile.pr.adapt (10001) has been granted superuser permissions for an interactive shell" pops up on my screen every 30 seconds on the bottom of my screen in a grey box.
#2- i also noticed that i can accept and recieve calls but i can not hear, nor can the other person hear me. if i use hangouts video call, skype, etc it works fine.
#3-i also tried to get rom manager to make a recovery and it says it needs to get CWD recovery to install a new software, the first thing we need to do is install a up to date version, we will begin that process now... etc.. then it says to get started you must first sset up a custom recovery, it gives two options a samsung galaxy s3 on metro pcs or a samsung previal 2 on boost mobile, or device not listed, when i click that it says "SM-G920T does not have an officially supported CWDR yet. Have you installed a CWD based recovery manually?" so im not sure what to do from there, or if i even need that. i have been a iphone user since day one went to android after reading up a lot on it, although rooting is quite different than jailbreaking it seems, i am incredibly excited to get started if i can get past these little problems and get started and figure everything out. ANY advice, or anwsers to these problems would be Greatly appreciated! thanks!
Also i went to dev options in settings and noticed the "OEM unlocking- allow the bootloader to be unlocker" was turned off, i dont know if this is necessary to root if i did something wrong by not turning it on or what, or if it may fix any problems above if i turn it on now. thanks!
I have a samsung Galaxy S6 (SM_G920T) . i Rooted and did not trip Knox, Although i did just remember that my fingerprint sensor is not working either.
Thank you guys so much this si a incredible forum i have spent hours and hours reading and researching before making this post i appreciate it so much!
#1 Freeze that ****. Use some root tool to freeze that T-mobile apk, seems u gave it root permissions at some point. I believe there are a lot of apps that you will want to do the same.
#2 ? No idea. Stock rom/kernel?
#3 What is this I don't even. Don't do that. Go to TWRP's official web, get your zeroflte (SM-GT920T) twrp and flash it via ODIN, or else get the recovery.img and use flashify. All that assuming you want a custom recovery.
You will need to unlock the bootloader if you are on 5.1.1. I believe locked will prevent changes or wiping anything on the OS partitions, even recovery (can someone confirm?)
I believe jailbraking and rooting should be pretty much similar, if not the same, as both target to grant the user root access to do whatever he pleases on the OS.
Welcome to android btw.
How did you root? Sounds like you used the modified sboot which causes no sounds in calls and nonfunctional fingerprint scanner. If so, flash back to stock and use a different rooting method. The rest, pretty much what the above poster stated
Root
I rooted using the version that I found the only one that works it seemed like, went to Odin put my phone In download mode and then put the boot loader download in BL and the. Put a something unikernel.sbin I believe, whatever the guide said also then it was done. I thought you couldn't use the twrp or custom recovery etc on tmobile one yet but I just read a thing about xtrestolite odex pure v2 which says it's for 5.1.1 and my model of phone but in the guide it says to root using CF auto root and a link there to it but the link doesn't have my phone on the list that the guide that clearly is my phone says to use I don't know if I'm missing something but I want to use it I understand most of it but I don't know if I need to unropt first and re root then use Odin and flash twrp that's supported on my phone then use that to recover the rom. Etc. The kernel that says is used in the guide is the same one I downloaded so do I need to remove it all then let it do that or?
Sorry if this didn't make sense I'm halfway there between confused and understood I have spent the last 10 hours reading and trying to figure this out though lol. Thanks guys!
Also
Sorry for adding more but also how do I flash back to stock? Search for the download to the stock image of my phone? Also I could only find one way of rooting everything else said it wasn't working yet or am I missing a big portion of something here?
Just flash the 5.1.1 firmware to return to stock. To root, flash unikernel with Odin. The other method you used was to not trip knox, but as you experienced has side effects. I had to Odin back to 5.1.1 myself. Can't have those issues
thanks!
so how do i flash back to 5.1.1? find the ling to completely stock 5.1.1 and flash through odin in the same spot and same way i flashed the kernel to root? also.. i rooted with " s6_UniKernel_v2-0003-ODIN.tar" is that not the one you were talking about?
CjetOKC said:
so how do i flash back to 5.1.1? find the ling to completely stock 5.1.1 and flash through odin in the same spot and same way i flashed the kernel to root? also.. i rooted with " s6_UniKernel_v2-0003-ODIN.tar" is that not the one you were talking about?
Click to expand...
Click to collapse
Yes, flashing to 5.1.1 works exactly like that. You need to get the version for your model (very important on this one) and then simply place that file in the AP field of ODIN while the device is in recovery mode. It is normal for ODIN to freeze for 2 minutes while verifying. Make sure to use a MD5 checker tool on the firmware before flashing.
Rooting has historically required more technical savvy and balls than jailbreaking, but PingPong made rooting the S6 brain-dead simple. CF-Auto root is still pretty painless, but you must make sure you have the right zip for your device.
Anyhoo, the quickest & easiest way to restore phone calls & fingerprint scan is to use Odin to get back to bone stock.
Next, use PingPong to root. After rooting, "com.tmobile.pr.adapt" will ask for root access. That is T-Mobile's "phone home" app and sends info about your device (probably including root status). Deny it root access and make sure you check "Remember my choice", and it won't bother you again. You will not lose any functionality by denying it root, so terminate that crap.
Don't bother with rom manager. CWM is archaic. If you want a custom recovery, use TWRP. You can install TWRP either using Odin or TWRP Manager app (it's free).
Good luck and have fun with your S6
CjetOKC said:
Sorry for adding more but also how do I flash back to stock? Search for the download to the stock image of my phone? Also I could only find one way of rooting everything else said it wasn't working yet or am I missing a big portion of something here?
Click to expand...
Click to collapse
Are you still rooted? If so, and if you are experiencing the call audio issue, go flash AOU's kernel. He has made a kernel for the tmo s6. that should eliminate your call audio issue. The finger print scanner is the only issue with flashing his kernel. Also, I rooted with the modded sboot, his TWRP and kernel, and I didn't trip knox
http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Hi guys. I somehow messed things up really bad.
I was running a modded ROM, but decided I wanted to go back to unrooted stock. I followed this instructions in this video: https://www.youtube.com/watch?v=6avEPGWB8E0
Unfortunately, things didn't work out. When I tried flashing the files it kept saying "system not found". Now I'm stuck in recovery forever. If I try to press start, nothing happens. If I scroll up to factory, nothing happens either. If I look at the Bootloader logs, all it says is "failed to validate system image. Boot up failed".
The one good thing is that the phone recognizes being plugged into my computer (Windows 10), so maybe there's a small chance I can get my phone back. If you guys have a solution, please let me know, as I'm pretty distraught right now. Also hoping there's a chance I can get my photos back that are on the device, though that seems unlikely now.
Unrooted stock? I can possibly see going back to rooted stock, or at least a CF (rooted) stock-based ROM, but not unrooted stock. "Please make me a slave again. Please, I don't like owning my phone."
Do you still have TWRP custom recovery or do you only have stock recovery? If you have TWRP, use the File Manager and drag over a custom ROM from your PC, and flash it.
ChazzMatt said:
Unrooted stock? I can possibly see going back to rooted stock, or at least a CF (rooted) stock-based ROM, but not unrooted stock. "Please make me a slave again. Please, I don't like owning my phone."
Do you still have TWRP custom recovery or do you only have stock recovery? If you have TWRP, use the File Manager and drag over a custom ROM from your PC, and flash it.
Click to expand...
Click to collapse
Long story short, I'm a slave to Pokemon Go. I used to be super passionate about having my phone rooted and everything, but I found I wasn't really using the rooted features at all. I can completely understand the appeal of having it rooted, it's just not something I need right now.
Unfortunately I have the stock recovery, and nothing seems to be loading on it.
Xpwnage123 said:
Long story short, I'm a slave to Pokemon Go. I used to be super passionate about having my phone rooted and everything, but I found I wasn't really using the rooted features at all. I can completely understand the appeal of having it rooted, it's just not something I need right now.
Unfortunately I have the stock recovery, and nothing seems to be loading on it.
Click to expand...
Click to collapse
Is your bootloader still unlocked? Can you connect your phone via ADB and re-flash TWRP? Forget about Pokemon Go for now and just get your phone back to working.
Also with custom ROMs you can still run the ROM and UNroot your phone. (I know you can with CM.) No need to go back to stock, unless parent company of Pokemon is clueless and demands stock.
Well, seems they are clueless and doing what Android Pay does:
http://www.xda-developers.com/lates...blocks-rooted-devices-from-entering-the-game/
What Niantic has managed to do with the update is kill off the enthusiasm in users who had root but were not cheating. Root is used for many more things outside of cheating in a game, and to assume that all rooted users are cheaters is just silly.
_____
After some more reading around, it seems Niantic is actually using the SafetyNet checks to check for root. XDA Senior Member MaaarZ found the SafetyNetService being called in the game code. Niantic is really making users jump through the whole nine yards, as this is the same method employed by Android Pay. This means that if you do need to run Pokémon GO on a rooted device, you need to go through the whole Magisk and systemless root way. Or stop playing completely, because that is what Niantic wants you to do.
Click to expand...
Click to collapse
ChazzMatt said:
Is your bootloader still unlocked? Can you connect your phone via ADB and re-flash TWRP? Forget about Pokemon Go for now and just get your phone back to working.
Click to expand...
Click to collapse
First of all thanks for your prompt responses. I really appreciate it.
I've always sort of had trouble getting ADB to work. I'm pretty sure the only version ADB I have installed on my laptop is the Fastboot version I downloaded from the video I linked. As I'm typing this, I'm currently downloading Android SDK and RSDLite, though the process is taking a while.
I think my bootloader is unlocked, but I'm not entirely sure. I think when I installed the custom rom, root first came out on the turbo. The method I used was the Mofo method. If I need to install a more elaborate version of ADB I will do so, I just might need clarification on what particular version is most optimal to use.
Xpwnage123 said:
I think my bootloader is unlocked, but I'm not entirely sure. I think when I installed the custom rom, root first came out on the turbo. The method I used was the Mofo method. If I need to install a more elaborate version of ADB I will do so, I just might need clarification on what particular version is most optimal to use.
Click to expand...
Click to collapse
The MoFo method was not bootloader unlock, and it only worked on KitKat. Wow, you were still using MoFo?
Real bootloader unlock came via Sunshine ($25) last November 2015, and you needed at least stock Lollipop 5.1 with Verizon firmware SUTL-44. It also now works with Verizon SUTL-49.
If you never paid for Sunshine, then your bootloader was never unlocked.
However, using ADB you can re-flash stock firmware even with a locked bootloader.
Some Droid Turbo owners like @TheSt33v will be more help than me as to what version you should flash. I own three Quarks but not the Droid Turbo. But as long as you are flashing, might was well update to SUTL-49.
IF you can't find a good download of SUTL-49, here's at least SUTL-44. Thank @bhb27.
https://www.androidfilehost.com/?fid=24052804347843637
_______
Also, go read this.
How to Manually Official Firmware on any Motorola Device
http://forum.xda-developers.com/dro...force-how-to-manually-flash-official-t3282077
Even though written for the Kinzie, the concept and method is the same.
Xpwnage123 said:
First of all thanks for your prompt responses. I really appreciate it.
I've always sort of had trouble getting ADB to work. I'm pretty sure the only version ADB I have installed on my laptop is the Fastboot version I downloaded from the video I linked. As I'm typing this, I'm currently downloading Android SDK and RSDLite, though the process is taking a while.
I think my bootloader is unlocked, but I'm not entirely sure. I think when I installed the custom rom, root first came out on the turbo. The method I used was the Mofo method. If I need to install a more elaborate version of ADB I will do so, I just might need clarification on what particular version is most optimal to use.
Click to expand...
Click to collapse
You need neither the SDK nor RSDLite. If you're interested in unlocking your bootloader (and returning to pokemon go-ready stock in the process), follow my guide here: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684. If you don't want to unlock your bootloader, and you want to return to stock kitkat so that you can continue using mofo, let me know what build you're on (see "about phone" in your settings) and I can send you a link to the firmware package that you'll need. If you want to update to the latest firmware and you don't care about unlocking your bootloader (maybe ever), only follow section 0 of my guide and take whatever OTA updates you are given with the understanding that you'll probably never be able to unlock your bootloader again after taking them.
ChazzMatt said:
The MoFo method was not bootloader unlock, and it only worked on KitKat. Wow, you were still using MoFo?
Real bootloader unlock came via Sunshine ($25) last November 2015, and you needed at least stock Lollipop 5.1 with Verizon firmware SUTL-44. It also now works with Verizon SUTL-49.
If you never paid for Sunshine, then your bootloader was never unlocked.
However, using ADB you can re-flash stock firmware even with a locked bootloader.
Some Droid Turbo owners like @TheSt33v will be more help than me as to what version you should flash. I own three Quarks but not the Droid Turbo. But as long as you are flashing, might was well update to SUTL-49.
IF you can't find a good download of SUTL-49, here's at least SUTL-44. Thank @bhb27.
https://www.androidfilehost.com/?fid=24052804347843637
_______
Also, go read this.
How to Manually Official Firmware on any Motorola Device
http://forum.xda-developers.com/dro...force-how-to-manually-flash-official-t3282077
Even though written for the Kinzie, the concept and method is the same.
Click to expand...
Click to collapse
TheSt33v said:
You need neither the SDK nor RSDLite. If you're interested in unlocking your bootloader (and returning to pokemon go-ready stock in the process), follow my guide here: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684. If you don't want to unlock your bootloader, and you want to return to stock kitkat so that you can continue using mofo, let me know what build you're on (see "about phone" in your settings) and I can send you a link to the firmware package that you'll need. If you want to update to the latest firmware and you don't care about unlocking your bootloader (maybe ever), only follow section 0 of my guide and take whatever OTA updates you are given with the understanding that you'll probably never be able to unlock your bootloader again after taking them.
Click to expand...
Click to collapse
Thank you guys. I was able to revive my phone from the dead using your advice. Unfortunately, I lost all of the photos from my trip to Europe, but overall I'm happy my phone is back and running. That will be a lesson to me to be less lazy about backing up my data.
Once again, thank you very much.
Someone over in Resurrection Remix thread got Pokemon Go to work with Root Cloak:
Nitefire77 said:
Pokemon go works on my phone with rootcloak. Wasn't too difficult to get it working
Click to expand...
Click to collapse
You can ask him for details. So, you can still run a custom ROM if you wish...
newbie warning: don't re-lock bootloader, and beware flashing any custom ROM. &OTA...
only modify a phone you are willing to throw away.......
##
pre-note: TWRP 3.3.1-0 -> fastboot boot twrp.img (this is temporary)
before doing anything, backup some little partitions: EFS, fsg, Vendor. Maybe others. You will need these to get back to a working stock.
##
$$
DO AT YOUR OWN RISK - I TAKE NO RESPONSIBILITY.
note added 2-27-2020: it may be that some problems with returning to stock are due to not (in TWRP) advanced wiping data, system, dalvik ART cache before flashing. You can do temp "fastboot boot twrp-3.3.1-0-payton.img" w/o quotes, and do it there. -changed/edited. don't use TWRP to flash a stock zip!
$$
NO FIX IS KNOWN FOR ANY OF THESE PROBLEMS. PHONE IS DESTROYED.
newbie warning: don't re-lock bootloader, and beware flashing ANY custom ROM.
On the X4, the bootloader changes drastically between 8 and 9 as it introduces a dual file system which is used by OTA updates to alternate the live system, and as a backup if failure. It is not a true Treble system, only partial. You must not depend on being able to flash back and forth between O and P. If you update to P, stay there. I expect this to be exacerbated by those phones which update to 10, if that in fact happens(probably One/fi only). There is also much confusion as to which file system/setup any custom ROM uses, and thus, how you would get back to stock, if that is even possible. Be very careful and assure yourself that you are fully willing to lose permanently your new phone before you do anything. Please read posts in these forums.
I've seen many posts of folks, mostly noobs, who have flashed ANY custom ROM Lineage and are unable to get back to a working stock. Sounds super simple but apparently it's not. Best to assume that if you try things, especially Lineage, that you will never be able to get back to a working stock. Read a bunch of posts here and you will realize that.
I've also seen a bunch of folks on this phone, and other phones who have run a bat file to flash their phone which contains the line
"fastboot oem lock" or similar.
Don't do it!!! - This will lock your phone and you will never be able to do anything with it again. It is totally unnecessary to lock your phone. Folks who should know better are leaving bat files lying around with this command. If you use one of those bat files to flash your phone, just check and remove that command line. Else you will have destroyed your phone. That's one of those things that "sounds good" until you do it.
EDIT: You can run stock on a bootloader unlocked phone - I do it all the time - plays PoGo just fine. I don't know about banking apps - I don't use them as I assume any 10-year-old can and will hack my phone.
EDIT: 6Feb2020: folks are reporting taking a security OTA onto a modified phone and rendering their phone(s) unusable. Only take OTA to a pure unmodified (no Majisk ever on it)(etc)(no mods ever on it)(stock recovery)(etc) stock ROM. Heed this warning. All of these "temporary" mods leave traces that screw up the update process.
EDIT: this was successfully fixed. see: https://forum.xda-developers.com/moto-x4/help/ota-update-endless-fail-loop-ppws29-69-t4045771 my guess is only works if you haven't changed bootloader or file system - NO custom ROM.
NO FIX IS KNOWN FOR ANY OF THESE PROBLEMS. PHONE IS DESTROYED.
Please do a lot of reading here before you try to modify your phone, unless you are totally willing to render it useless. A word to the wise.
Ahah ))) I bought today X4 with relocked BL and I it seems it was relocked after flashing LOS or similar )) )
Now I trying to recover it ))
Сan we boot phone to QC9008 (EDL) mode without testpoiint?
St.Noigel said:
Ahah ))) I bought today X4 with relocked BL and I it seems it was relocked after flashing LOS or similar )) )
Now I trying to recover it ))
Сan we boot phone to QC9008 (EDL) mode without testpoiint?
Click to expand...
Click to collapse
afaik, you can't. Return the phone and get your money back. There will probably be a bunch of these worthless phones put up for sale. If you can't return it you could try the suggestions of sd_shadow in other threads here, but I don't believe they were successful on the X4.
KrisM22 said:
afaik, you can't. Return the phone and get your money back. There will probably be a bunch of these worthless phones put up for sale. If you can't return it you could try the suggestions of sd_shadow in other threads here, but I don't believe they were successful on the X4.
Click to expand...
Click to collapse
OK. But I unbrick it. Now I have fully loaded system, but without WiFi ot mobile network.. It`s problem - I can`t turn on OEM unlocking.. (
Goшng to try to find solution
UPD. Everything work well now. But it my device I have custom stock flashed. Not sure it`ll work with LOS onboard
its to late for me
llue45 said:
its to late for me
Click to expand...
Click to collapse
Yeah, I know. You're one reason I posted this.
modified OP
change: from "Lineage" to "any custom ROM"
hi im thinking about buy this phone for 100 bucks used how i can verify this relocked bootloader problem ? in Developer Options ? if i cant switch to Oem Unlocking its broken ? to make sure this dont happen to me the one who its selling it to me says that already its updated to PIE , i want stock and root it just that after unlock the bootloader but if cant be unlocked i better move on . so my question is what really im looking for , when i get my hands on the phone before drop my money to the thin air because is not a store . and maybe never see this guy again in my life , i Live In The Caribbean Dominican Republic
People here are not so trusty . so i will appreciate if i can have some tips to know if im going to do a good Buy. Thanks In Advance .
JavaShin said:
hi im thinking about buy this phone for 100 bucks used how i can verify this relocked bootloader problem ? in Developer Options ? if i cant switch to Oem Unlocking its broken ? to make sure this dont happen to me the one who its selling it to me says that already its updated to PIE , i want stock and root it just that after unlock the bootloader but if cant be unlocked i better move on . so my question is what really im looking for , when i get my hands on the phone before drop my money to the thin air because is not a store . and maybe never see this guy again in my life , i Live In The Caribbean Dominican Republic
People here are not so trusty . so i will appreciate if i can have some tips to know if im going to do a good Buy. Thanks In Advance .
Click to expand...
Click to collapse
Good to not be trusting!!!! With this (or any) phone, I recommend you get only from a place (like ebay) where you can easily return it and get your money back. ebay can force a reluctant seller to refund your money. Assure that the seller has a 99% + rating and says they will accept returns and pay for return shipment, usually for 30 days. I don't think you can easily tell if it has been unlocked and re-locked - only that it works perfectly, or doesn't. You can check the ID of the ROM in your phone against the latest for your area by checking lolinet.
When you get it, check all functions and assure IMEI is present. check wifi, BT, etc etc. Make calls. Check that the phone works with the towers in your area and with a local SIM. etc etc. read here and find the things that folks having problems where it won't do things and assure your phone will do it. Install Pokemon Go on it and play it briefly to assure your phone hasn't been modified. I have no idea if any of these phone will work with any banking or payment apps, and each app will have it's own specific checks that it performs against the phone. Test what you will use. Fully. ASSUME NOTHING!!!
As far as rooting it and/or unlocking it, I would strongly advise against it. For this particular phone X4 I would determine that it works perfectly and then NOT modify it. Unless, of course, you are willing to throw your phone away and buy a new one without a second thought(most of us don't have that kind of money!). Mine happened to have been unlocked when I got it from ebay but it was on a stock 8.1 and it was able to, and did OTA update to the latest Pie stock ROM. Thus I was easily able to assure if was okay. It being unlocked seems to have affected nothing. I have never tried to root it or do anything to it (recovery or otherwise) as I read far too many posts of folks here who had rendered their phones incapable of returning to a working stock, and only on a limited custom. Not what I wanted. I have not heard of anyone successfully getting one of these phones back to a FULLY WORKING stock state.
The days of getting a phone and easily modifying it and then returning it to stock may be gone. Get a phone you will enjoy, and use it! Unmodified!!! Welcome to pre-Treble part1a . Expect a few years of growing pains.
I like my phone and enjoy not having to worry about whether a custom ROM will work and constantly be chasing updates and fixes. I use a case - I believe it is this one
https://www.ebay.com/itm/For-Motoro...hash=item33d89fee5a:m:mU5XV7jSj1TfD_kr-L4VT9g
which, so far, has protected it from several minor falls. I would never use any phone w/o a case!!!
But i think if the phone gets unlocked the bootloader and flash twrp making a backup of the stock recovery before just booting the twrp custom recovery then flash magisk on twrp on top of Stock PIE , After Of Course Make A Full Backup Of all partitions reboot and then on Stock PIE have ROOT. and never flash custom roms and never lock the bootloader and stock can be reflashed without problems with a script on linux with fastboot on bootloader-fastboot mode this plan can work , NO ? i had a E4 sprint and never had problems doing that
I need root for A Lot Of Things like Xposed Drivedroid Youtube vanced Adway ETC.
Can Anyone who is reading this have done this just root pie on this phone with unlocked bootloader ? and able to restore stock flashing it back with the retail firmware just to remove root and clean the stock and recovery ? or try to put android one ? the phone which im going to buy its the XT1900-6 retail brazil i already have the retail stock official pie rom ready to flash and with the script on linux with no fastboot oem lock anywhere .
added to OP: EDIT: 2-6-2020 folks are reporting taking a security OTA onto a modified phone and rendering their phone(s) unusable. Only take OTA to a pure unmodified (no Majisk ever on it)(etc)(no mods ever on it)(stock recovery)(etc) stock ROM. Heed this warning. All of these "temporary" mods leave traces that screw up the update process.
OTA issues
KrisM22 said:
added to OP: EDIT: 2-6-2020 folks are reporting taking a security OTA onto a modified phone and rendering their phone(s) unusable. Only take OTA to a pure unmodified (no Majisk ever on it)(etc)(no mods ever on it)(stock recovery)(etc) stock ROM. Heed this warning. All of these "temporary" mods leave traces that screw up the update process.
Click to expand...
Click to collapse
I posted a new thread on these OTA issues with the X4 at https://forum.xda-developers.com/moto-x4/help/ota-update-endless-fail-loop-ppws29-69-t4045771. I was never presented with an "option" to install the latest OTA, it just automatically attempted to install (apparently a FORCED update) and is continuing to do so and failing ad infinitum. That phone works, just getting constant failure notifications. Question is, how to stop the attempted updates?
The second identical phone (updated per Magisk OTA tutorial instructions) is borked, with no phone connectivity. Can these be recovered by wiping/flashing stock rom PPWS29.60-39-6-2 and get them operating again as stock? I can forego the OTAs if there's a way to stop them from screwing up the device.
I never had other than stock recovery on either of these phones, I always boot TWRP via fastboot to do mods.
EDIT: XDA system is stalling and caused double post. Sorry. Mod please delete.
-deleted by me -
@redwoodie , please don't post to this thread. I read all your threads/posts but have no information.
NO FIX IS KNOWN FOR ANY OF THESE PROBLEMS. PHONE IS DESTROYED.
As to whether "x" strategy will work, you are certainly free to explore that on your own, in your own thread.
No one here knows. I am certainly not going to experiment on my own phone and run the likelihood of having to buy a new one. Folks like yourself keep showing up and doing just that because they are SURE it will work. But it hasn't.
Read all the posts.
There are very few folks left here on this forum. Once they have destroyed their phone, and tried a bunch of things, they move on.
THERE IS NO SOLUTION.
This thread is only to warn newbies.
I personally know nothing about the phone other than what has been posted by others.
Read it.
If you discover a true solution that allows a phone to work perfectly ON STOCK, please post it and you will make lots of folks happy, assuming it is repeatable.
However, no known solution.
But, again, you are free to explore solutions - just not in this thread, please. Thanks.
added paragraph at top:
$$
DO AT YOUR OWN RISK - I TAKE NO RESPONSIBILITY.
note added 2-27-2020: it may be that some problems with returning to stock are due to not (in TWRP) advanced wiping data, system, dalvik-ART-cache before flashing. You can do temp "fastboot boot twrp-3.3.1-0-payton.img" w/o quotes, and do it there. -changed/edited. don't use TWRP to flash a stock zip!
This guy is full of crap
KrisM22 said:
only modify a phone you are willing to throw away.......
NO FIX IS KNOWN FOR ANY OF THESE PROBLEMS. PHONE IS DESTROYED.
Please do a lot of reading here before you try to modify your phone, unless you are totally willing to render it useless. A word to the wise.
Click to expand...
Click to collapse
I've literally put so many different custom ROMs on this phone. I've bricked it, unbricked, hard bricked it and soft bricked it. Stop misinforming people bro. The Moto G6 I would say to be careful with but still I wouldn't make a post like this guy. The Moto x4 just requires a little prep to make it a full treble, GSI accepting, custom Rom beast. Plus there are a few official ROMs out there even Android 10 for the Moto x4 specifically. Don't be scared. Just research a lot and follow instructions
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
JavaShin said:
But i think if the phone gets unlocked the bootloader and flash twrp making a backup of the stock recovery before just booting the twrp custom recovery then flash magisk on twrp on top of Stock PIE , After Of Course Make A Full Backup Of all partitions reboot and then on Stock PIE have ROOT. and never flash custom roms and never lock the bootloader and stock can be reflashed without problems with a script on linux with fastboot on bootloader-fastboot mode this plan can work , NO ? i had a E4 sprint and never had problems doing that
I need root for A Lot Of Things like Xposed Drivedroid Youtube vanced Adway ETC.
Can Anyone who is reading this have done this just root pie on this phone with unlocked bootloader ? and able to restore stock flashing it back with the retail firmware just to remove root and clean the stock and recovery ? or try to put android one ? the phone which im going to buy its the XT1900-6 retail brazil i already have the retail stock official pie rom ready to flash and with the script on linux with no fastboot oem lock anywhere .
Click to expand...
Click to collapse
The op is a cracker Jack
Ims status not registered
Guys i flashed custom rom without taking backups of efs and all,so i ended up with ims status not registered because of that my volte is broken mine is retin.I tried to flash stock firmware but the imei is broken.Any way to fix this?
bumpsi since apparently folks are not reading this. mod a phone, likely lose it. relock a phone and def lose it.