Related
New MotoX from sprint.
android version 4.2.2
baseband msm8960pro_bp_2323.020.90.00r
kernel 3.4.42.-xline.
system version 139.14.1
build 13.9.0q2.x-116-mx-17-57-1
i did a fair amount of searching but could not find the proper instructions for obtaining root access for the moto x. Need root access or this device would be a deal breaker.
Can someone point me to a link? I would be much appreciated. Thanks Listers!!!
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
I did search the web and the forums; I'm sorry. it was a long day, i had just purchased the phone and wanted to make sure i didn't brick it. I have rooted/jailbroken several other devices but wanted to know if the latest ota update would cause a problem for that.
Again, I'm sorry for for the excess forum baggage.
I'll try again.
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
moises1204 said:
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
Click to expand...
Click to collapse
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
bullpen7979 said:
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
Click to expand...
Click to collapse
ownmoto or whatever?? um... ok... I can tell you haven't browsed the different sections for the Moto X here or you would have seen in the "Moto X Original Android Development" section that its called "PwnMyMoto"
Brokenwall gave you a way to root your sprint device, no matter what stock rom you're running... OTA updates or not. Granted unlocking your bootloader voids your warranty... and he didn't give you a 100% newbie step by step guide which it now seems you were really looking for.
Also in the Moto X Original Android Development is a thread titiled... "[Root] RockMyMoto (Yes, even the first OTA)" which is pretty obvious as to what it is for. If you took a few minutes to read it, you'd know it is what you want if you don't want to unlock your bootloader. Its not a very long thead (141 posts currently) so it wont take long to read. The original post contains everything you need, except how to make sure you have Telnet as part of your Windows install (there are posts in that thread later that say what to do to enable/install Telnet as a Windows Feature inside Add/Remove Programs).
Sorry, if I come across as harsh. I know you just want to root without screwing up your phone, and I get that. But I'm afraid if you haven't been able to look around and find this stuff, you'll likely not be able to properly follow and understand the instructions and will therefore stand a good chance of messing up your phone!!!
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Again, I'm sorry for being stuck here and having to ask the question. I would greatly appreciate the assistance of someone who can speak to my specific situation.
Thank you and regards to those who can help.
Bull
bullpen7979 said:
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
Click to expand...
Click to collapse
The steps taken in the video are exactly explained in the post.
There are a few assumptions.. 1. Your PC has telnet on it, or you know how to install it. (there is a link further in that thread which Windows users can follow. 2. You have ADB Driver and Platform tools from the AndroidSDK installed correctly on your PC, and Moto drivers installed. Again, there are threads on this already, so you'll have to find/follow them.
You could also try to follow this post -> http://forum.xda-developers.com/showthread.php?p=47067076 however, it uses puttytel.exe instead of Telnet so it will look a little different. It too assumes you've properly installed ADB Driver and Platform Toos from the Android SDK along with the Moto drivers.
Another option is the "Tool Kit" -> http://forum.xda-developers.com/showthread.php?t=2477132 which is an "all in one" type tool that should set things up and help you too. I've not used it, but it appears to be a complete package including ADB and the drivers. Only thing would be if you want to use "Flash back to stock" you need to download the ROM file separately.
bullpen7979 said:
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Click to expand...
Click to collapse
Right now, there is the rom the phone shipped with. If you have that, you use PwnMyMoto process to root it. The "camera update" that was pushed over the air. If you have that, you use RockMyMoto. And as of yesterday, if you have Verizon X, there is KitKat which can not be rooted (unless your carrier allows you to unlock your phone's boot loader)
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. Bummed. I just want my device rooted so I can send my daughter the one I promised here.
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. I'd even accept remote assistance via logmein. Pretty bummed. I just want my device rooted so I can send my daughter the one I promised her.
I have no idea why this process has been so difficult this time around. I have rooted, downloaded & installed custom roms, etc.
http://forum.xda-developers.com/showthread.php?t=2536200
Please help. I am out of ideas.
jayboyyyy said:
http://forum.xda-developers.com/showthread.php?t=2536200
Click to expand...
Click to collapse
Isn't this just for the verizon model?
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
I have to believe it can be done, I'm just not getting it for some reason.
I'm really sorry, as I have said in multiple posts. Like I said, I would paypal you a reasonable sum if one of the more experienced people out there want to remote in via logmein and help. I know that sounds lame. I'm normally a guy who likes to research it all himself and do this.
I'm normally the guy who helps other people with this stuff, but I just can't hash this out. I've spent the last three days of my free time reading, researching, trying to get the thing to connect as a drive so I can push files to it and run them via adb.. Even went so far as considering buying a wireless adapter to put the files there wirelessly. I'd try now but I'm exhausted. If you can help, please PM me and we can work out something if you are willing. Thanks to those who have suggested methods. I do appreciate your help. I have tried them all except the last kit kat method which I thought was just for Verizon. I'm with sprint. As tired as I am, I'm afraid to brick the thing. I'm very close to asking for a method to restore the phone and take it back. I really wanted wireless tether. I need it for work and to run the ipad on occasion. Sorry this was a long post/thread.
Sorry I'm not as quick as the rest of you. Just want a rooted phone and can't seem to get it done this time on my own.
Any suggestions?
bullpen7979 said:
Isn't this just for the verizon model?
Click to expand...
Click to collapse
No. That will work for any Moto X Developer Edition or Carrier edition with an unlocked boot loader. So T-Mobile, Sprint, etc.. If you can unlock your boot loader via -> https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth then you can root via this process.
bullpen7979 said:
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
Click to expand...
Click to collapse
To get your phone to show up in windows as Drive Letter, needs USB Mass Storage mode. Ok, You've installed an app for that, fine... but 1. I'm not aware of that app working, and more importantly, 2. I am not aware of any root method in these forums that requires your phone to show as a "drive letter" to work. So I couldn't even begin to suggest what you are doing wrong.
What instructions are you actually trying to follow? Why not post questions on it in that particular thread, including exact details of what you've done, what you see on your phone, any/all errors or messages, etc.???
And if what you really want to do is tether with sprint, I hope you have checked out threads with suggestions on hacks/ways that work to tether on Sprint Moto X before you worry about rooting.
For example, if you want to remain non-rooted, FoxFi could possibly be an option. As I am a Verizon user and haven't used it, I can't say how well it works for Spint, and I can't say how well it works for Verizon, just that Verizon KK users say it doesn't work, but it did with the JB/4.2.2 roms..
KidJoe;
Thanks for your patience. I'm sorry about all of this. I have tried to be as clear as I can be, but I will redouble my efforts. Let me read clearly that last link and I will post back. I do want root access for all the other cool things it enables too, so I'm determined to get it right. I just want to be careful not to miss something and turn a decent phone into a paperweight.
That link you referenced is exactly what I used to unlock. When I reboot the phone, I get a white screen with a red exclamation point that says bootloader unlocked.
Fox Fi is a no go
Update. Just tried Foxfi. Does not work with current status of unlock but not rooted. I need root, but how does one copy files to the device via usb? I remember there being a setting.
I opened a new thread on this subject. http://forum.xda-developers.com/showthread.php?p=47740046#post47740046
Hope that's not against the rules. I really thing the failure is related to my inability (or ignorance of how to ) push files to the device.
Good gravy. This has eaten up WAY too much time.
Apparently its a mixed bag over at sprint. Some can some can't.
http://www.sprintusers.com/forum/showthread.php?t=234246
I have a (previously) rooted D950, and I can't get the OTA At&t update to install. I've completely removed root, and double checked through root checker that it's gone, and the update errors out every time with a message about having been rooted.
I read another thread where some people report being able to retain root after receiving the update THEN downgrading and rooting 4.2.2., then installing the OTA again, but it seems that I jumped the gun and rooted first, which is now causing the install to error out.
Has anyone else experienced this? Found a workaround? Ideas? Totally frustrating.
Sent from my LG-D950 using xda premium
Here is the link to a detailed guide . Dev hyelton's page includes links to AT&T ROMs.
If you need help with LG Flash Tool:
- Connect your phone with usb to laptop/computer and open device manager
- seek for Ports: COM & LPT, right click onto Android LTE usb port connection, click "properties", click "Advanced", then change port number to number 41, click "OK"
- DOWNLOAD LG Flash Tool and install .exe
- DOWNLOAD MegaLock.zip (3kb), unzipped (7kb)
- Exchange MegaLock.dll in your system folder "LG" with the unzipped MegaLock.dll file that you have downloaded
- Open LG Flash Tool, input .dll file of downloaded stock rom.zip folder and input .tot file of this folder
- Click onto USB instead of LAN, then click "OK"
- Left arrow at the window top should be enlightened now
- Click onto this arrow
- Wait for all popup windows telling milky way download and connections to fail
- Wait then for the check of CRC and .dll files
- One or all ports should be opened, "READY" enlightened
- Disconnect your phone from computer
- Connect again and watch the immediate start of the flashing process
- After completion you must install most of the app updates, update your LG and/or AT&T profile before installing kitkat update.zip
If you'll stick in updating stock rom to kitkat, watch my video on YouTube (it's about LS995 Sprint, but AT&T LG Flex will proof the same installation process):
Visit my blog at http://www.myreviewsofreviews.for the detailed description how to avoid bootloop during the installation of LG Kitkat update.zip via ADB sideload
Thanks, but this is not a fix. Unfortunately, that guide is of no use since his links are still down. Further, I was hoping for feedback from others who have experienced this issue, and found a resolution. I have read that this is also happening on devices that have not been rooted.
I am not looking to flash a rom through FlashTool. I'm looking to fix the OTA error. All I want to do is install the OTA update.
lorawithano said:
Thanks, but this is not a fix. Unfortunately, that guide is of no use since his links are still down. Further, I was hoping for feedback from others who have experienced this issue, and found a resolution. I have read that this is also happening on devices that have not been rooted.
I am not looking to flash a rom through FlashTool. I'm looking to fix the OTA error. All I want to do is install the OTA update.
Click to expand...
Click to collapse
Not sure what you were hoping for but the guide is correct process for your problem. You need to flash back to 4.2, don't touch anything in the way of modifying system files or deleting bloatware, sign into your main Google account, update all your apps...then root the phone and when it reboots look for the ota. I would give it a couple min to setup after flashing back to 4.2 so that it successfully finds the update rather than telling you you're on the most current software. I had your exact problem too, I was one of the first AT&T users on here to take the update I tried everything to
A: retain root with supersu features and some root cloaker programs etcetera
B: factory reset, call AT&T, to get them to push the update again because I just could not get it to successfully flash without detecting suspicion of root.
Flashing back to 4.2 to retain root worked for me over 4 times now on 3 different flex phones (I had some hardware and then software issues on my replacement model)
Sent from my LG-D950 using XDA Premium 4 mobile app
brittoking said:
Not sure what you were hoping for but the guide is correct process for your problem. You need to flash back to 4.2, don't touch anything in the way of modifying system files or deleting bloatware, sign into your main Google account, update all your apps...then root the phone and when it reboots look for the ota. I would give it a couple min to setup after flashing back to 4.2 so that it successfully finds the update rather than telling you you're on the most current software. I had your exact problem too, I was one of the first AT&T users on here to take the update I tried everything to
A: retain root with supersu features and some root cloaker programs etcetera
B: factory reset, call AT&T, to get them to push the update again because I just could not get it to successfully flash without detecting suspicion of root.
Flashing back to 4.2 to retain root worked for me over 4 times now on 3 different flex phones (I had some hardware and then software issues on my replacement model)
Sent from my LG-D950 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You say flash back to 4.2, but I am already on 4.2. Never left 4.2. That's the issue. The device is defective. They're sending me a new one.
lorawithano said:
You say flash back to 4.2, but I am already on 4.2. Never left 4.2. That's the issue. The device is defective. They're sending me a new one.
Click to expand...
Click to collapse
You didn't understand my post at all it seems, I gave you the instructions to flash back to STOCK which would have fixed your problem. I did accidentally word my post incorrectly saying "flash BACK to 4.2" obviously I knew you were on 4.2, so clearly I meant use the aforementioned guide to flash back to stock then take the update. Looks like you went another route, congrats
Sent from my LG-D950 using XDA Premium 4 mobile app
Huh? Wut
Not sure where things went wrong here.....
Me thinks some thread cleaning is in order...
Stand-by....
Cleaning finished.
Come on folks, let's relax and take a breath. Sometimes things just don't work and there's little to be done about it. If common known procedures don't work, then hopefully something else will, and just move along to something else.
Or in this case, the device is being returned which of course solves all.
No need for anybody to get all bent out of shape, what started out as being helpful, just took a bad turn somewhere for unknown reasons.
Relax, be cool....
MD
KitKat update on ATT G FLEX running on Tmobile.
This might be a stupid question . I have my ATT G FLEX D950 running on Tmobile. It is on Jellybean . I am unable to pull the Kitkat update and it says "Phone is not registered on network". I am assuming I need to get my phone on ATT network to pull the update. Am I right? is there any other way out ?
santy83 said:
This might be a stupid question . I have my ATT G FLEX D950 running on Tmobile. It is on Jellybean . I am unable to pull the Kitkat update and it says "Phone is not registered on network". I am assuming I need to get my phone on ATT network to pull the update. Am I right? is there any other way out ?
Click to expand...
Click to collapse
Kinda, yes.
I had the same problem. My phone was never activated on the ATT network so it would not recognize it. You have 2 options:
Get a prepaid sim from ATT, use it once and than put your Tmobile sim back in there or ask a friend that has ATT to use the sim for a few minutes. A text or a phone call is all you need.
Worked great for me.
Dear All,
Two days before , I brought the HTC One (32 GB Golden) which on digging the Phone identity came to know the Model no 831C, later after goggling it came to know that I belongs to Sprint Carrier.
On inserting the code of Hardware components, I found few test/s were not passed and worked normally, other issues are TV app is not recognizing the server, Double Tap Screen wake/sleep works depending on its mood, vDM Client error pops up often.
Request all the experts here to please help me out with the Solution as to how can I make it work flawlessly.
Regards
Karan Adhikari
karan_adhikari said:
Dear All,
Two days before , I brought the HTC One (32 GB Golden) which on digging the Phone identity came to know the Model no 831C, later after goggling it came to know that I belongs to Sprint Carrier.
On inserting the code of Hardware components, I found few test/s were not passed and worked normally, other issues are TV app is not recognizing the server, Double Tap Screen wake/sleep works depending on its mood, vDM Client error pops up often.
Request all the experts here to please help me out with the Solution as to how can I make it work flawlessly.
Regards
Karan Adhikari
Click to expand...
Click to collapse
1) Which tests didn't pass ?
2) Which ROM are you using ?
3) TV app is discontinued by HTC (HTC suggests "Peel Smart Remote")
4) Double Tap Screen Wake works only when you lift up phone and proximity is not blocked (5 seconds cooldown between trying again).
Double tap status bar sleep is buggy on lollipop (this can be different if you have custom kernel)
5) disable vDM client app to prevent popups (you should also disable other sprint apps like HtcSprintService and Self Service SZ)
First of all, thank you for addressing my query & sorry for delay in revert.
Sir, I do know it’s the Sprint phone, as far your concern on below questions, let me try to answer them as below:
1) Which tests didn't pass?
When I run the all functions test by this code (*#*#3424#*#*) in one of the test the error word in green / red appears on screen
2) Which ROM are you using?
I believe it’s the Custom ROM, which would have be provided by Sprint. Software no is 1.54.651.8
3) TV app is discontinued by HTC (HTC suggests "Peel Smart Remote")
No comments, will try to search the PSR on play store.
4) Double Tap Screen Wake works only when you lift up phone and proximity is not blocked (5 seconds cooldown between trying again).
Will strictly follow next time when I do it.
Double tap status bar sleep is buggy on lollipop (this can be different if you have custom kernel)
Its on Android KK 4.4.2
5) disable vDM client app to prevent popups (you should also disable other sprint apps like HtcSprintService and Self Service SZ)
I didn’t find the option to disable vDM app nor did I found other apps of sprint. May I request you to suggest any alternates for it ?
Now, sir my other query is Is it advisable to flash a latest LP rom (i.e Goggle play edition or the rom developed by Bad boys team here) , also it seems that I am S-ON, because when I enter the bootload screen Power + Vol Down key where three android icon at bottom appears , I read LOCKED at the very top of the screen.
Pl. suggest whether it shall be advisable to do it if so request you to suggest the best ROM which shall run flawless in India.
Thanking you in anticipation.
Regards
Karan
Can somebody help me out with this please.. ??
The snapshots of my device are attached hereby, my only query is, and considering the attached images of device can I flash a Custom ROM on to it? Will that be advisable to do so? Are there the chances to Brick the device.
If the answer according to all the Experts here lies in assertive, which ROM is best, since this is a Sprint Device, I have found on the forum that Badboyz rom shall go flawless with any Sprint device, so may I go ahead with it. I am in India presently so wish that all the apps i.e Remote TV, Radio should run properly.
Regards
Karan Adhikari
karan_adhikari said:
The snapshots of my device are attached hereby, my only query is, and considering the attached images of device can I flash a Custom ROM on to it? Will that be advisable to do so? Are there the chances to Brick the device.
Click to expand...
Click to collapse
You need to delete the second and third pictures, there is way to much personal information in there.
The "Locked" at the top of the screen in the bootloader means that the bootloader is locked. If you look directly underneath it you'll see that it says "S-Off". To flash custom recoveries or roms or anything, you need the bootloader unlocked. You can do this using HTCDev, or since you're soff, you can unlock it via adb.
Once you're bootloader is unlocked, you should be set for everything. Flash a custom recovery like Captain Throwback's custom TWRP, get root if you don't have it already, update your firmware, etc. The bad boys xda page has most of this stuff in it.
Note: Your phone is supercid, so you're not limited to just sprint roms.
---------- Post added at 10:31 AM ---------- Previous post was at 10:04 AM ----------
Also, just wondering what exactly were the tests that failed when you did *#*#3424#*#* ?
Thanks a lot sir, I am grateful to you, I have followed you instruction of deleting the images.
Now, last night I did the Factory Hard reset (P+V-DN keys), it went fine, except the data was erased which I never wanted to be backed up though I was haunting of loosing the Sim Lock, but all went fine.
I have my registration on HTCDEV too, and the process of obtaining the TOKENID should go without any hassles.
Now in pursuant to your advise below, will it still be mandatory to unlock the bootloader ? or I may follow the process of wipe/data and then immediately flash the BB's Rom ?
Further, I stand corrected that all the function tests are passed normally, it was my mistake of not placing the Handset on the plain surface while performing one of the test.
Finally, why the model no in phone identity says 831C, and not M8 - May I request your views on this please?
Thanking you once again for addressing, all you guys are rocking, I am here on this forum since 2008, and needless to say "A Proud Member"
All my Best wishes to MEMBERS.
With Regards
K.B. Adhikari
ssantos132 said:
You need to delete the second and third pictures, there is way to much personal information in there.
The "Locked" at the top of the screen in the bootloader means that the bootloader is locked. If you look directly underneath it you'll see that it says "S-Off". To flash custom recoveries or roms or anything, you need the bootloader unlocked. You can do this using HTCDev, or since you're soff, you can unlock it via adb.
Once you're bootloader is unlocked, you should be set for everything. Flash a custom recovery like Captain Throwback's custom TWRP, get root if you don't have it already, update your firmware, etc. The bad boys xda page has most of this stuff in it.
Note: Your phone is supercid, so you're not limited to just sprint roms.
---------- Post added at 10:31 AM ---------- Previous post was at 10:04 AM ----------
Also, just wondering what exactly were the tests that failed when you did *#*#3424#*#* ?
Click to expand...
Click to collapse
karan_adhikari said:
I have my registration on HTCDEV too, and the process of obtaining the TOKENID should go without any hassles.
Now in pursuant to your advise below, will it still be mandatory to unlock the bootloader ? or I may follow the process of wipe/data and then immediately flash the BB's Rom ?
Click to expand...
Click to collapse
Yes, you still need to unlock the bootloader. After that you need to flash a custom recovery.
After doing these two you will be able to flash a custom rom, just make sure you follow all the instructions on the BB rom page
ssantos132 said:
Yes, you still need to unlock the bootloader. After that you need to flash a custom recovery.
After doing these two you will be able to flash a custom rom, just make sure you follow all the instructions on the BB rom page
Click to expand...
Click to collapse
Thanks once again. I am planing to adopt the process of unlocking the bootloader , via HTCDEV and then for flashing the custom Rom, shall seek your guidance hope you won't mind if I bother you for it.
Best Wishes
Karan
Hi ssantos132,
I found there is a SuperSU app preinstalled on my Handset, which prompts me to Grant access when I try to install some other apps from PS- goggle, is my device rooted, because I have found in this link (http://blog.laptopmag.com/root-htc-one-m8), wherein lastly the SuperSU app gets installed automatically.
Pl. guide.
Thanks
Yeah, it looks like you already have root. Try downloading a root checker app from the play store if you want to make sure.
ssantos132 said:
Yeah, it looks like you already have root. Try downloading a root checker app from the play store if you want to make sure.
Click to expand...
Click to collapse
Well thanks for replying. I did that earlier, it says Congratulation your device is rooted. So now when we have concluded that my device is Rooted, the only thing left to be done is, flashing a Custom recovery thru TRWP or CWM right ? Incase if its already been rooted and say if I re-do it, any risk for Device?
Pl. guide.
With Regards
Karan
karan_adhikari said:
Well thanks for replying. I did that earlier, it says Congratulation your device is rooted. So now when we have concluded that my device is Rooted, the only thing left to be done is, flashing a Custom recovery thru TRWP or CWM right ? Incase if its already been rooted and say if I re-do it, any risk for Device?
Click to expand...
Click to collapse
Yeah, once the bootloader is unlocked you can flash a custom recovery then a rom. You can't flash a custom recovery through TWRP or CWM though. Download a custom recovery then use fastboot flash recovery recovery recovery.img
Believe me, That is one rare cellphone you have got.
I am having the same and as I tried few roms, without backing up the radio and replaced it with some random one. Now my phone is just a toy to play with.
I ll suggest you to stick with the rom you are having right now, Take a nandroid backup of the rom, radio and everything else. and keep it safe for future. You will never be able to find them online for this particular phone.
If you would like to help me solve my phone's issue, Please upload the radio. My phone is just laying around in my desk as I have no way to get it to work.
karan_adhikari said:
Dear All,
Two days before , I brought the HTC One (32 GB Golden) which on digging the Phone identity came to know the Model no 831C, later after goggling it came to know that I belongs to Sprint Carrier.
On inserting the code of Hardware components, I found few test/s were not passed and worked normally, other issues are TV app is not recognizing the server, Double Tap Screen wake/sleep works depending on its mood, vDM Client error pops up often.
Request all the experts here to please help me out with the Solution as to how can I make it work flawlessly.
Regards
Karan Adhikari
Click to expand...
Click to collapse
I know about these devices that are being sold in India. I bought a used phone on OLX having same model number with the exact similar problems. I assume these devices are development only devices which don't run a final version of software. I have noticed that most of the issues in the phone are software related. Using my development expertise, I was able to fix most of the problems and upgrade the firmware to Lollipop, however I have messed up the radio and was unable to restore the radio firmware to anything that actually works (This phones come with a radio version that can't be obtained from any online source). If you can provide the radio image from your device, I will prepare a flashable zip to upgrade the firmware to Lollipop which would include the modem you provide, along with instructions on how to unlock the device and flash it to get going. Probably this would iron out the issues that you are facing with your device.
To grab the radio image from your device, use the following command from "adb shell" or Terminal Emulator
Code:
$ su
# dd if=/dev/block/mmcblk0p20 of=/sdcard/radio.img
You will find a file in the sdcard (Internal) named radio.img. Please upload it and provide me with a link.
I would advice you not to make any changes to the device until I provide you with clear instructions on how to do so. Trust me, I really had a hard time with this phone.
Well thanks indeed for the time you took for replying, Sir are you from India Since the name sounds such ?
Secondly, I am desperately looking to upgrade the Software to Latest 5.02 Lollipop from present Kitkat, my basic requirement is that any ROM to which I flash should at least contain the Stock FM Radio, wherein it should be able to tune in the Indian Radio Station.
Confusing issues which keep me scratching my head is that I have pre installed SuperSU app in it. Also I re checked it via installing the app Root Checker which indicated that my device is Rooted. However as and when I tried my device to restart it in Recovery mode it starts normally after a while , the SuperSU app is not getting started.
Can you help me through please. Favor me with (1) Do I need to unlock the Bootloader ? (2) Do I need to flash the custom recovery thru TRWP or CWM ? (3) suggest best Rom which will working with FM Radio (4) A Layman's User Guide to carry out all the process.
Thank You once again.
Regards
Karan Adhikari
dhiru1602 said:
I know about these devices that are being sold in India. I bought a used phone on OLX having same model number with the exact similar problems. I assume these devices are development only devices which don't run a final version of software. I have noticed that most of the issues in the phone are software related. Using my development expertise, I was able to fix most of the problems and upgrade the firmware to Lollipop, however I have messed up the radio and was unable to restore the radio firmware to anything that actually works (This phones come with a radio version that can't be obtained from any online source). If you can provide the radio image from your device, I will prepare a flashable zip to upgrade the firmware to Lollipop which would include the modem you provide, along with instructions on how to unlock the device and flash it to get going. Probably this would iron out the issues that you are facing with your device.
To grab the radio image from your device, use the following command from "adb shell" or Terminal Emulator
Code:
$ su
# dd if=/dev/block/mmcblk0p20 of=/sdcard/radio.img
You will find a file in the sdcard (Internal) named radio.img. Please upload it and provide me with a link.
I would advice you not to make any changes to the device until I provide you with clear instructions on how to do so. Trust me, I really had a hard time with this phone.
Click to expand...
Click to collapse
I will try to help you out definitely, once i am out of my confusion, of taking the Nandriod back up, I will try to upload the img file so your problem is hopefully solved
Thanks
gjmptw said:
Believe me, That is one rare cellphone you have got.
I am having the same and as I tried few roms, without backing up the radio and replaced it with some random one. Now my phone is just a toy to play with.
I ll suggest you to stick with the rom you are having right now, Take a nandroid backup of the rom, radio and everything else. and keep it safe for future. You will never be able to find them online for this particular phone.
If you would like to help me solve my phone's issue, Please upload the radio. My phone is just laying around in my desk as I have no way to get it to work.
Click to expand...
Click to collapse
(1) Do I need to unlock the Bootloader ?
YEs, you must unlock it. It won't affect the phone's basic functunalities
(2) Do I need to flash the custom recovery thru TRWP or CWM ?
Yes. I recommend twrp.
(3) suggest best Rom which will working with FM Radio
None for the phone we are using A Layman's User Guide to carry out all the process.
Please don't upgrade the rom as it might mess with the boot("radio") . Upload your radio and wait for Dhiru's post.
thanks, where shall I get the Radio file please ?
gjmptw said:
(1) Do I need to unlock the Bootloader ?
YEs, you must unlock it. It won't affect the phone's basic functunalities
(2) Do I need to flash the custom recovery thru TRWP or CWM ?
Yes. I recommend twrp.
(3) suggest best Rom which will working with FM Radio
None for the phone we are using A Layman's User Guide to carry out all the process.
Please don't upgrade the rom as it might mess with the boot("radio") . Upload your radio and wait for Dhiru's post.
Click to expand...
Click to collapse
Mr. Dhiru,
Pl intervene and guide me on how do I take the back up and upload the Radio file. So far what I understood is that TWRP toolkit from sites like Rootjunky and follow the youtube video uploaded for it and instal the TWRP and back the radio file and then upload them here for your needful
Pl. guide whether is understanding is correct or not ?
Thanks
karan_adhikari said:
Well thanks indeed for the time you took for replying, Sir are you from India Since the name sounds such ?
Secondly, I am desperately looking to upgrade the Software to Latest 5.02 Lollipop from present Kitkat, my basic requirement is that any ROM to which I flash should at least contain the Stock FM Radio, wherein it should be able to tune in the Indian Radio Station.
Confusing issues which keep me scratching my head is that I have pre installed SuperSU app in it. Also I re checked it via installing the app Root Checker which indicated that my device is Rooted. However as and when I tried my device to restart it in Recovery mode it starts normally after a while , the SuperSU app is not getting started.
Can you help me through please. Favor me with (1) Do I need to unlock the Bootloader ? (2) Do I need to flash the custom recovery thru TRWP or CWM ? (3) suggest best Rom which will working with FM Radio (4) A Layman's User Guide to carry out all the process.
Thank You once again.
Regards
Karan Adhikari
Click to expand...
Click to collapse
Required advice pl. help somebody
Pl. advise as on which TWRP img file should I take into consideration for flashing, since my boot loader is old one the firmware no 4096, Software no is 1.54.651.8, and its sprint 831C (HTC ONE m8). I yesterday tried with the the latest 2.80 twrp img file but got stuck on "Entering Recovery" Screen, some how could manage to come back by Power+Vol up and when the screen got black then Vol Down which took me to boot-loader and then came back by reseting phone. Now the phone is working normal.
I am desperately looking to install CWM or TWRP , so that can take an nandroid backup of the system file, and later post it for the experts here to update the firmware and fix other issues......
snaps of device are attached here
Request all experts to kindly guide me here on it.
Thanking you in anticipation
Karan Adhikari
karan_adhikari said:
Mr. Dhiru,
Pl intervene and guide me on how do I take the back up and upload the Radio file. So far what I understood is that TWRP toolkit from sites like Rootjunky and follow the youtube video uploaded for it and instal the TWRP and back the radio file and then upload them here for your needful
Pl. guide whether is understanding is correct or not ?
Thanks
Click to expand...
Click to collapse
It is about time I get some straight-forward answers. I'm tired of Googling everything I can and it not being what I think it is.
It is about time I get some straight-forward answers. I'm tired of Googling everything I can and it not being what I think it is.
What I have come to you for, XDA, is some light in the cave.
WILL THERE BE A WAY TO ROOT THE AT&T SAMSUNG GALAXY S5 VARIANT?!
Towelroot doesn't work. And if quite frankly tired ****less of all the posts that still exist talking about it.
Is there anything in development? All I can see now is SafeStrap and Multi-Tool but if you aren't rooted these do nothing. I just want some information for God's sake. Will ANYONE tell me what is being done about the development of the device's rooting? Is anyone even trying anymore? And if so, tell me! More importantly, if there are people, why aren't they being talked about? With as many S5's as there are out there (at least to me since I know about 10 people who use them regularly) why wouldn't anyone be trying?
PLEASE people get it together!
I have come from only 3 devices, but I was able to root and mod all of them. Rooting and Modding is love and life to me and is pretty much all I sincerely love about Android. The fact that I can't afford a new phone at this stage is sad, and I have grown tired of the bloating of TouchWiz, especially with the Lollipop update. I know that a rooted S5 would be extremely awesome, but since there is nothing about it being worked on I suppose I'll just have to live with the rubbish they call TouchWiz.
And if by some chance someone who can develop something like this reads this thread, please, respond, PM me, do SOMETHING. TELL THE XDA WORLD, because I GUARANTEE there are more of me out there who have longed for this but have just lived with it. BE A GAME CHANGER A DO SOMETHING ABOUT IT.
Don't give me the, "Knox and bootloaders are hard to pass by, especially with the new more secure versions." Because guess what, geohot did it once. Not like it lasted, but the fact is is that it worked at one point. It may be harder now, but it's still possible. PLEASE DO SOMETHING. PLEASE TRY.
Anyway, best of luck to all of the users. And anyone who has read this please leave a comment and tell me what you know. Many days I'm left alone, commentless with my threads. This is one I truly need to be acknowledged.
THANK YOU FOR YOUR TIME
Well that's a big thread revealing nothing about your device other than its an s5. There are ways to root with towel root unless you have the 5.0 ota.
dirtydodge said:
Well that's a big thread revealing nothing about your device other than its an s5. There are ways to root with towel root unless you have the 5.0 ota.
Click to expand...
Click to collapse
Well it's pretty obvious that it's AT&T. 5.0 L and Towelroot has never worked before.
ElectricBiskitz said:
Well it's pretty obvious that it's AT&T. 5.0 L and Towelroot has never worked before.
Click to expand...
Click to collapse
Towel root has worked and still does on nce. If you were on OA1 towel root wouldn't work unless you downgraded to use it then go back to OA1. And no it don't work on 5.0. There are multiple kernels and builds that att has put out that it didn't work on without downgrading. But just for future reference is always helpful if you include your build, version, etc. Like i said there are multiple builds that it didn't work on unless you downgraded is only the 5.0 that you can't downgrade.
dirtydodge said:
Towel root has worked and still does on nce. If you were on OA1 towel root wouldn't work unless you downgraded to use it then go back to OA1. And no it don't work on 5.0. There are multiple kernels and builds that att has put out that it didn't work on without downgrading. But just for future reference is always helpful if you include your build, version, etc. Like i said there are multiple builds that it didn't work on unless you downgraded is only the 5.0 that you can't downgrade.
Click to expand...
Click to collapse
I said that I have Lollipop so everything you're saying won't help. Plus I know you wouldn't have known anyway but I have tried all of this way before Lollipop. I tried downgrading from OA1 at the time to NCE and I ended up in a bootloop. The kernel was faulty. I had to reset my phone in a very long, aggravating process to get it back. I NEVER want to go down that road again. And like I said in the entire post, I'm just looking for a pioneer to try again and make a geohot move on Lollipop. And no offense to you, you wouldn't have known this about me anyway, but your kind of information was exactly what I was trying to steer away from. And here it comes, right back at me. I'm just tired and sick of all the people who just do, essentially, a copy/paste of common information. When in my circumstance, am looking for something difference. Again, no harm to you, but anyone and everyone that has ever responded to my threads because it's all the same.
As someone who used to reverse engineer software, updates to said software usually patch those exploits. It's not usually easy to regain a new exploit and can take massive amounts of time. I can't speak for other devs but (at the time I did this stuff and still currently) I have a demanding full time job and a family, which come first over a hobby. I can guarantee I will never buy another Samsung phone again because of this. I know it's not always feasible, but maybe look into getting an HTC phone with developer options that is unlocked from the factory. Venting on here will get your cause nowhere.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Forum is trying to help you!
ElectricBiskitz said:
Well it's pretty obvious that it's AT&T. 5.0 L and Towelroot has never worked before.
Click to expand...
Click to collapse
Right, first things first. Calm down and please stop being so rude and angry when other members who are trying to help you. It's not their fault you are not able to root your phone. It is possible and I'm testament to this.
You need to understand the process of how to do it and you need patients. I live in the UK with an AT&T handset and my handset was never going to ever get to 5.0 because of that fact. I am now on 5.0 and it's rooted and I found out how to do it all on this forum. Further more if you search for my one and only post (yes I'm making you do some work - it's how to teach people to learn new things) I have information in there that shows you how to get to 100% rooted 5.0. What I'm prepared to do is write for you a line by line process in a Word document that will get you from your stock unrooted 5.0 handset to 5.0 rooted. You need the right files and ODIN - that's all you need to complete this. No matter what state you end up getting you handset into bootloop, failed starts..etc as long as you are able to get into download mode you are able to recover the handset. Yes, it can be annoying and yes it can take hours to get back to square one (sometimes) but you have to be prepared for that when you do something like this. It took me two whole evenings and 5 failed attempts before I got it working.
So after reading all this, if you are prepared to accept my help let me know and I will write the document for you.
Besides the fact there are already a metric ass ton of threads in this phone's forum discussing rooting the 900A.
I've been reading them for weeks now after I was overzealous and took the OTA to OC4 figuring there was a root solution already..... There wasn't, and oh well... My fault for not researching first, but it's making me keep my Note 2 until something comes up.
Hell something may already be out, but with rants like yours..... Feel free to enjoy the great advice in the links in my signature.
wwit said:
Right, first things first. Calm down and please stop being so rude and angry when other members who are trying to help you. It's not their fault you are not able to root your phone. It is possible and I'm testament to this.
You need to understand the process of how to do it and you need patients. I live in the UK with an AT&T handset and my handset was never going to ever get to 5.0 because of that fact. I am now on 5.0 and it's rooted and I found out how to do it all on this forum. Further more if you search for my one and only post (yes I'm making you do some work - it's how to teach people to learn new things) I have information in there that shows you how to get to 100% rooted 5.0. What I'm prepared to do is write for you a line by line process in a Word document that will get you from your stock unrooted 5.0 handset to 5.0 rooted. You need the right files and ODIN - that's all you need to complete this. No matter what state you end up getting you handset into bootloop, failed starts..etc as long as you are able to get into download mode you are able to recover the handset. Yes, it can be annoying and yes it can take hours to get back to square one (sometimes) but you have to be prepared for that when you do something like this. It took me two whole evenings and 5 failed attempts before I got it working.
So after reading all this, if you are prepared to accept my help let me know and I will write the document for you.
Click to expand...
Click to collapse
So wait... You have a method to get him from ota 5.0 to a muniz method 5.0? I was under the impression that was not possible once you took the ota ( i didn't, but I'm still curious)
ota 5.0 root?
wwit said:
Right, first things first. Calm down and please stop being so rude and angry when other members who are trying to help you. It's not their fault you are not able to root your phone. It is possible and I'm testament to this.
You need to understand the process of how to do it and you need patients. I live in the UK with an AT&T handset and my handset was never going to ever get to 5.0 because of that fact. I am now on 5.0 and it's rooted and I found out how to do it all on this forum. Further more if you search for my one and only post (yes I'm making you do some work - it's how to teach people to learn new things) I have information in there that shows you how to get to 100% rooted 5.0. What I'm prepared to do is write for you a line by line process in a Word document that will get you from your stock unrooted 5.0 handset to 5.0 rooted. You need the right files and ODIN - that's all you need to complete this. No matter what state you end up getting you handset into bootloop, failed starts..etc as long as you are able to get into download mode you are able to recover the handset. Yes, it can be annoying and yes it can take hours to get back to square one (sometimes) but you have to be prepared for that when you do something like this. It took me two whole evenings and 5 failed attempts before I got it working.
So after reading all this, if you are prepared to accept my help let me know and I will write the document for you.
Click to expand...
Click to collapse
Ok, so I'm sorry if i've got this wrong, but as the user above stated, I too have been scouring the web and FDA searching for a way to root an at&t galaxy s5 with an OTA u5.0 lollipop update. From all the research i have done, I have found no resolution to the locked bootloader. Are you saying that you can root the stock, unrooted, locked bootloader, sm-g900a running lollipop 5.0? If so, I will gladly donate to your Paypal for detailed instructions on how to do this! I am no noob at rooting, having rooted every galaxy since the skyrocket,. But this lollipop crap is driving me crazy. Any help is greatly appreciate!!
wwit said:
Right, first things first. Calm down and please stop being so rude and angry when other members who are trying to help you. It's not their fault you are not able to root your phone. It is possible and I'm testament to this.
You need to understand the process of how to do it and you need patients. I live in the UK with an AT&T handset and my handset was never going to ever get to 5.0 because of that fact. I am now on 5.0 and it's rooted and I found out how to do it all on this forum. Further more if you search for my one and only post (yes I'm making you do some work - it's how to teach people to learn new things) I have information in there that shows you how to get to 100% rooted 5.0. What I'm prepared to do is write for you a line by line process in a Word document that will get you from your stock unrooted 5.0 handset to 5.0 rooted. You need the right files and ODIN - that's all you need to complete this. No matter what state you end up getting you handset into bootloop, failed starts..etc as long as you are able to get into download mode you are able to recover the handset. Yes, it can be annoying and yes it can take hours to get back to square one (sometimes) but you have to be prepared for that when you do something like this. It took me two whole evenings and 5 failed attempts before I got it working.
So after reading all this, if you are prepared to accept my help let me know and I will write the document for you.
Click to expand...
Click to collapse
I need this please! I have an at&t Samsung S5 lollipop 5.0 please guide me
I have not seen any solutions for people who took Ota update. Did you make the exploit yourself? If not can you point out the source?
Thanks!
lowspeed said:
I have not seen any solutions for people who took Ota update. Did you make the exploit yourself? If not can you point out the source?
Thanks!
Click to expand...
Click to collapse
My phone just automatically downloaded the 5.0 update a few weeks ago. I attached a screenshot of my phones specs
I replied to the person who said he has instructions. ..
wwit said:
You need to understand the process of how to do it and you need patients. I live in the UK with an AT&T handset and my handset was never going to ever get to 5.0 because of that fact. I am now on 5.0 and it's rooted and I found out how to do it all on this forum. Further more if you search for my one and only post (yes I'm making you do some work - it's how to teach people to learn new things) I have information in there that shows you how to get to 100% rooted 5.0. What I'm prepared to do is write for you a line by line process in a Word document that will get you from your stock unrooted 5.0 handset to 5.0 rooted. You need the right files and ODIN - that's all you need to complete this. No matter what state you end up getting you handset into bootloop, failed starts..etc as long as you are able to get into download mode you are able to recover the handset. Yes, it can be annoying and yes it can take hours to get back to square one (sometimes) but you have to be prepared for that when you do something like this. It took me two whole evenings and 5 failed attempts before I got it working.
So after reading all this, if you are prepared to accept my help let me know and I will write the document for you.
Click to expand...
Click to collapse
if you're able to root OC4 on a G900A, i'm all ears.
so far i'm unable to install TWRP (fail auth) using odin and it seems it only works for 900F or other models, not 900A specifically that has never been previously rooted. all posts on the topic suggests you cannot downgrade from OC4 and any attempt is futile at the moment.
Rooted 5.0
tmac200913 said:
My phone just automatically downloaded the 5.0 update a few weeks ago. I attached a screenshot of my phones specs
Click to expand...
Click to collapse
Hi, I'm trying to make time to create the document to show how I did it. I intend to recreate the process again on my handset and include screenshots as I go through.
Basically the only way I could get my handset to 5.0 root was to take the handset back to NCE stock firmware (by the way I have all the files on my laptop to do this) using ODIN v3.09. This took my back to G900AUCU1ANCE (4.4.2) April 2014 release. I installed Towelroot, busybox and Safestrap. Did a backup of the device (when I went back to 4.4.2 I then configured my device to look and feel how I wanted it to be because I wanted to restore the data partition once on Lollipop - but this is a required part of the upgrade). You need to use Safestrap to create a backup folder structure on the SD card so you can dump the 5.0 (OC4) rooted backup on to restore later in the upgrade process. I then installed G900AUCU2ANG3 (4.4.2) September 2014 release using Safestrap. I then installed the G900AUCU2AOA1 (4.4.4) February 2015 release and then used Safestrap to take another backup. Then I did an advanced wipe in Safestrap (excluding the SD card) and restored the OC4 rooted backup (I found online I also have this file). Once that restored I then within Safestrap selected the reboot > download mode (don't restart the handset into Lollipop before doing this process - the whole process will fail). Once the handset rebooted into Download mode I connected the handset to ODIN v.3.10.6 and installed the G900A_OC4_Stock_Partitions_wOA1_BL.tar.md5 (using the AP option in ODIN). Once that completed the handset rebooted and after 5-10 mins started to upgrade files. Once that finished the handset was on 5.0 - the same as the screenshot you've posted and it's rooted. I have SuperSU installed working fine and I used Root Checker Basic to confirm the device is rooted. More so I then went on to sideload the G900A_OC4_TetherAddOn so I could get native wifi tethering because AT&T still had this locked down in the root 5.0 I installed above.
anyone verify this?
Not sure they started out on 5.0...I don't know of anyone who has successfully downgraded once on OC4.
wwit said:
Hi, I'm trying to make time to create the document to show how I did it. I intend to recreate the process again on my handset and include screenshots as I go through.
Basically the only way I could get my handset to 5.0 root was to take the handset back to NCE stock firmware (by the way I have all the files on my laptop to do this) using ODIN v3.09. This took my back to G900AUCU1ANCE (4.4.2) April 2014 release. I installed Towelroot, busybox and Safestrap. Did a backup of the device (when I went back to 4.4.2 I then configured my device to look and feel how I wanted it to be because I wanted to restore the data partition once on Lollipop - but this is a required part of the upgrade). You need to use Safestrap to create a backup folder structure on the SD card so you can dump the 5.0 (OC4) rooted backup on to restore later in the upgrade process. I then installed G900AUCU2ANG3 (4.4.2) September 2014 release using Safestrap. I then installed the G900AUCU2AOA1 (4.4.4) February 2015 release and then used Safestrap to take another backup. Then I did an advanced wipe in Safestrap (excluding the SD card) and restored the OC4 rooted backup (I found online I also have this file). Once that restored I then within Safestrap selected the reboot > download mode (don't restart the handset into Lollipop before doing this process - the whole process will fail). Once the handset rebooted into Download mode I connected the handset to ODIN v.3.10.6 and installed the G900A_OC4_Stock_Partitions_wOA1_BL.tar.md5 (using the AP option in ODIN). Once that completed the handset rebooted and after 5-10 mins started to upgrade files. Once that finished the handset was on 5.0 - the same as the screenshot you've posted and it's rooted. I have SuperSU installed working fine and I used Root Checker Basic to confirm the device is rooted. More so I then went on to sideload the G900A_OC4_TetherAddOn so I could get native wifi tethering because AT&T still had this locked down in the root 5.0 I installed above.
Click to expand...
Click to collapse
This is funny.......there seems to be a huge disconnect between this and the actual issue in the OP which is someone that took the 5.0 OTA and wants root access. There currently is no way for him to gain root access. Instead you quoted, almost verbatim, my origina KeepRoot method and files: http://forum.xda-developers.com/showpost.php?p=59996087&postcount=4
muniz_ri said:
This is funny.......there seems to be a huge disconnect between this and the actual issue in the OP which is someone that took the 5.0 OTA and wants root access. There currently is no way for him to gain root access. Instead you quoted, almost verbatim, my origina KeepRoot method and files: http://forum.xda-developers.com/showpost.php?p=59996087&postcount=4
Click to expand...
Click to collapse
Morning, first of all if you take a look at my first post you will see I have clearly stated your name and I have not tried to take credit for your process. Secondly I have only been replying to questions from members who have read my results and have then from my post asked how I did it. I have then simply explained again in the post you have replied to how I got to a rooted version of Lollipop.
Are ypu saying that if a handset takes the ota it is not possible to go back to NCE and then forward right through to rooted Lollipop or are just annoyed thinking I am trying to take credit for your work. I'm happy to guide a member step by step through a process if they want me to but I have already said it's not my discovery.
Hey Everyone.
This is my first ever post to XDA forums, so pardon me if do something wrong
I recently got a Nexus 6 XT1103 (T Mobile). My software version is still at LYZ28N and whenever I try to update it, it says "Your System is up to date". I check the TMobile's website and the latest update is MMB29K. I have no idea why am I not getting the updates. Further information my Nexus 6 is not rooted or modified in anyway. I am using this unlocked cell phone in Pakistan. I have done some search but I couldn't find some reliable method to update without incurring any major risk.
I'd highly appreciate if someone can guide this noob Needless to say I am a total noob when it comes to advanced android stuff.
PS: Again apologies if I said something wrong.
Regards,
Ahmed
If you have the bandwidth available, download a factory image from Google and update your device manually using the instructions given or the instructions in the Nexus 6 all-in-one guide in the general subforum. You may not be getting updates as you have a North American device and are using it in Asia.
Strephon Alkhalikoi said:
If you have the bandwidth available, download a factory image from Google and update your device manually using the instructions given or the instructions in the Nexus 6 all-in-one guide in the general subforum. You may not be getting updates as you have a North American device and are using it in Asia.
Click to expand...
Click to collapse
As per T Mobile's website the latest version is MMB29K, from the link you posted should I straight away download the image for this MMB29K?
ahmedmateen said:
As per T Mobile's website the latest version is MMB29K, from the link you posted should I straight away download the image for this MMB29K?
Click to expand...
Click to collapse
No, MMB29K is several security updates ago (december I believe). Download and install the last one on the list (as of today MMB29X).
Didgeridoohan said:
No, MMB29K is several security updates ago (december I believe). Download and install the last one on the list (as of today MMB29X).
Click to expand...
Click to collapse
This is the first time ever I am playing with this stuff (nervous as hell coz I dont want to brick my fone, had to save for months to buy this one), I have searched sideloading, it seems a bit easier or noob friendly then this flashing. Whats your advice on it?
This is XDA, so a majority of the folks will recommend flashing the factory images
Since this is the first time you are considering this, I understand - it looks scary. Honestly, it is really not that hard to do - I never wait for OTA anymore - just download the factory images and flash it as soon as it is released. (takes me all of 5 minutes or so after the download) - but I've been doing this every month.
Just remember that Unlocking (or relocking) the bootloader will wipe your data. So I unlocked the bootloader the day I got the phone, and just leave it unlocked.
Flashing the factory images is pretty straightforward - read the first post at http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008 - and use Method 2 (in step 5) - don't flash the userdata.img if you want to retain your user data, and don't perform the "Wipe data/factory data reset" step towards the end of first post.
Read that first post a few times, and make sure you understand it before you proceed.
The hardest part is getting your fastboot and drivers set up. Before attempting any fastboot commands, you should test and make sure your fastboot is working - Connect your phone to your PC, and then, in a command prompt window, type "fastboot devices" (without quotes) and hit enter. Make sure you get back a serial #. If it tells you device not found or not connected or something like that, don't try flashing anything. Get that sorted out first.
Great advice from jj14.
Sideloading is gonna take longer time than doing a straight up flash of the latest factory image. You'd have to sideload every single incremental OTA.
First thing to do is to unlock your bootloader and letting it stay unlocked. You can fix almost everything that could happen to your phone if your bootloader is unlocked. And, as stated previously, it will wipe your phone.
jj14 said:
This is XDA, so a majority of the folks will recommend flashing the factory images
Since this is the first time you are considering this, I understand - it looks scary. Honestly, it is really not that hard to do - I never wait for OTA anymore - just download the factory images and flash it as soon as it is released. (takes me all of 5 minutes or so after the download) - but I've been doing this every month.
Just remember that Unlocking (or relocking) the bootloader will wipe your data. So I unlocked the bootloader the day I got the phone, and just leave it unlocked.
Flashing the factory images is pretty straightforward - read the first post at - and use Method 2 (in step 5) - don't flash the userdata.img if you want to retain your user data, and don't perform the "Wipe data/factory data reset" step towards the end of first post.
Read that first post a few times, and make sure you understand it before you proceed.
The hardest part is getting your fastboot and drivers set up. Before attempting any fastboot commands, you should test and make sure your fastboot is working - Connect your phone to your PC, and then, in a command prompt window, type "fastboot devices" (without quotes) and hit enter. Make sure you get back a serial #. If it tells you device not found or not connected or something like that, don't try flashing anything. Get that sorted out first.
Click to expand...
Click to collapse
Thank you, I followed some tutorial for side loading the update. After the first update the OTA's starting working again, as of this moment installing Feb's patch I have to say the guys at XDA rock, extremely helpful :good:
Didgeridoohan said:
Great advice from jj14.
Sideloading is gonna take longer time than doing a straight up flash of the latest factory image. You'd have to sideload every single incremental OTA.
First thing to do is to unlock your bootloader and letting it stay unlocked. You can fix almost everything that could happen to your phone if your bootloader is unlocked. And, as stated previously, it will wipe your phone.
Click to expand...
Click to collapse
It may take longer but for a noob like me it just did the trick
Awesome! You just needed that first push I guess.