I tried to flash a stock rom to my s6 edge and odin was stuck at writing the NAND partition for over an hour, so I restarted odin and retried to flash the firmware to my edge. For my second try, Odin is now getting stuck at setupconnection. Any idea whats wrong?
winner225 said:
I tried to flash a stock rom to my s6 edge and odin was stuck at writing the NAND partition for over an hour, so I restarted odin and retried to flash the firmware to my edge. For my second try, Odin is now getting stuck at setupconnection. Any idea whats wrong?
Click to expand...
Click to collapse
Having the same issue. I've got a UAE firmware and want to flash to BTU. I'll post back if I find a fix
Related
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.
PLease help,
i tried to do an update to AT&T sm g900a . my fw was 4.4.2 ng3. and i tired to flash nd3 and tried to flash oc1. but my phone stuck wit open padlock. then i flash stock partitions on oc4. then it could not on the phone.(i belive it automaticaly select re-partitions). then it only turn on upto samsumng log and stuck there. after 5 sec it reboot again.
i tried a stock rom flash with odin 3files Ap, cp & CSC. but it is not recovering. then i think i do erase the nand erase all.
i have also .pit file for SM g900A 16gb, and also tried to flash the pit file by checking re-partitions in odin3.
nothing work out. then i tried to flash single ap file but it is failed.
kindly give some advise,
Jstn Antony said:
PLease help,
i tried to do an update to AT&T sm g900a . my fw was 4.4.2 ng3. and i tired to flash nd3 and tried to flash oc1. but my phone stuck wit open padlock. then i flash stock partitions on oc4. then it could not on the phone.(i belive it automaticaly select re-partitions). then it only turn on upto samsumng log and stuck there. after 5 sec it reboot again.
i tried a stock rom flash with odin 3files Ap, cp & CSC. but it is not recovering. then i think i do erase the nand erase all.
i have also .pit file for SM g900A 16gb, and also tried to flash the pit file by checking re-partitions in odin3.
nothing work out. then i tried to flash single ap file but it is failed.
kindly give some advise,
Click to expand...
Click to collapse
Try this,
http://forum.xda-developers.com/showthread.php?p=60012961
Waiting4MyAndroid said:
Try this,
http://forum.xda-developers.com/showthread.php?p=60012961
Click to expand...
Click to collapse
hi thank you, i tried this but now it is stuck on galaxy s5 logo with unlocked padlock. and there no reboot , just stay the phone on. no way to switch off except take out the battery.
please advise
Mine was like this and I also tried the above to no avail....the only way I found around it was to take it in to ATT store and have them "re-flash the Lolipop update" Wiped my phone but it works, now I just have to wait (patiently) for root exploit for the OTA 5.0.
twocrows said:
Mine was like this and I also tried the above to no avail....the only way I found around it was to take it in to ATT store and have them "re-flash the Lolipop update" Wiped my phone but it works, now I just have to wait (patiently) for root exploit for the OTA 5.0.
Click to expand...
Click to collapse
thank you, any one have better idea other than this. can we do complete reflash the os on samsung sm g900a At&t?
please help
Jstn Antony said:
thank you, any one have better idea other than this. can we do complete reflash the os on samsung sm g900a At&t?
please help
Click to expand...
Click to collapse
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Jstn Antony said:
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Click to expand...
Click to collapse
Try factory reset from recovery.
Jstn Antony said:
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Click to expand...
Click to collapse
Which file did you flash
archie87 said:
Which file did you flash
Click to expand...
Click to collapse
i flashed 4.4.2 nce stock rom, by odin containing 4 files BL,AP, CP, CSC (BL didn't used)
i believed that it happened to me like stuck on Samsung logo at first time, when i flashed oc4 stock partitions to my 4.4.2 ng3 .
after that it never rebooted.
when i try to from sdcard it will say e/footer is wrong, something like that.
but somebody told me that i can adb and what is that ? it will help me or not?
kindly advise....
Jstn Antony said:
i flashed 4.4.2 nce stock rom, by odin containing 4 files BL,AP, CP, CSC (BL didn't used)
i believed that it happened to me like stuck on Samsung logo at first time, when i flashed oc4 stock partitions to my 4.4.2 ng3 .
after that it never rebooted.
when i try to from sdcard it will say e/footer is wrong, something like that.
but somebody told me that i can adb and what is that ? it will help me or not?
kindly advise....
Click to expand...
Click to collapse
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
archie87 said:
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
Click to expand...
Click to collapse
thank you i am trying to download this file. but i could not success due to bad internet. before i tried almost same single fie in the ap folder of odin. but it was not success.
but iwil try this and give you the updates...
Hi Archie
Big thank you, its great working Back to normal...
archie87 said:
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
Click to expand...
Click to collapse
Sweet! I was in the same boat and saw the post about getting stuck on the Samsung screen. This solution worked perfectly!
Thanks!
I purchased a soft bricked sm-g900a phone off of Ebay with the idea of using Odin to reflash and recover the phone. Since the phone was purchased soft bricked I do not have a history on what firmware was running on the phone or what the previous owner flashed that may have caused the phone not to boot to the OS or into recovery. I am assuming the previous owner was on 5.0 and tried to downgrade and ran into problems.
Short description of the current state of the phone:
1. Phone will boot into Odin Mode and can be flashed using Odin.
2. Phone will start to boot to recovery but sticks at "Recovery Booting. . . ." and reboots after about 30 seconds
3. Phone boots to Samsung logo and reboots after about 30 seconds.
What works:
Using Odin I can flash the following without errors: After flashing the phone exhibits the behavior above.
G900A_OC4_Stock_Kernel.tar.md5,
G900A_OA1_Stock_Kernel.tar.md5
G900A_OC4_Stock_Modem.tar.md5,
G900A_OC4_Stock_Partitions.tar.md5
G900AUCU3BOC4_OneClick..exe - reboots to recovery and "Recovery Booting. . . ."
I can flash SM-G900A_pit.pit with Odin 3.07 but not 3.09 or 3.10.
What does not work.
Tried flashing G900A_Downgrade_to_NCE.tar.md5 - Odin reports error
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
Phone reports errors
SYS REV CHECK FAIL :Refer 2> Binary 1
SECURE CHECK FAIL : System
Tried flashing SM-G900A 4.4.2 G900AUCU1ANCE Firmware - AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 in AP slot
Same errors as above .
Tried to use Kies to recover the phone. It goes through the process of recovering with 4.4.2 and crashes about the same place flashing wit Odin does.
I assume if I could get into recovery to do a factory wipe I would be able to get the phone to boot. I have read multiple forum posts and blogs on getting the bricked phone to work where most recommend flashing G900A_Downgrade_to_NCE.tar.md5 and then if you can't get into recovery to flash either G900A_OC4_Stock_Kernel.tar.md5 or G900A_OA1_Stock_Kernel.tar.md5 and then you should be able to get into recovery. This of course has not worked for me.
Does anyone have any idea how I might go about getting this phone to boot into recovery? Also is it possible to have the local AT&T store re flash 5.0 on the phone.
I know it is a risk buying soft bricked phones but I sure would not like to have an expensive paper weight.
Bogiemaker said:
I purchased a soft bricked sm-g900a phone off of Ebay with the idea of using Odin to reflash and recover the phone. Since the phone was purchased soft bricked I do not have a history on what firmware was running on the phone or what the previous owner flashed that may have caused the phone not to boot to the OS or into recovery. I am assuming the previous owner was on 5.0 and tried to downgrade and ran into problems.
Short description of the current state of the phone:
1. Phone will boot into Odin Mode and can be flashed using Odin.
2. Phone will start to boot to recovery but sticks at "Recovery Booting. . . ." and reboots after about 30 seconds
3. Phone boots to Samsung logo and reboots after about 30 seconds.
What works:
Using Odin I can flash the following without errors: After flashing the phone exhibits the behavior above.
G900A_OC4_Stock_Kernel.tar.md5,
G900A_OA1_Stock_Kernel.tar.md5
G900A_OC4_Stock_Modem.tar.md5,
G900A_OC4_Stock_Partitions.tar.md5
G900AUCU3BOC4_OneClick..exe - reboots to recovery and "Recovery Booting. . . ."
I can flash SM-G900A_pit.pit with Odin 3.07 but not 3.09 or 3.10.
What does not work.
Tried flashing G900A_Downgrade_to_NCE.tar.md5 - Odin reports error
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
Phone reports errors
SYS REV CHECK FAIL :Refer 2> Binary 1
SECURE CHECK FAIL : System
Tried flashing SM-G900A 4.4.2 G900AUCU1ANCE Firmware - AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 in AP slot
Same errors as above .
Tried to use Kies to recover the phone. It goes through the process of recovering with 4.4.2 and crashes about the same place flashing wit Odin does.
I assume if I could get into recovery to do a factory wipe I would be able to get the phone to boot. I have read multiple forum posts and blogs on getting the bricked phone to work where most recommend flashing G900A_Downgrade_to_NCE.tar.md5 and then if you can't get into recovery to flash either G900A_OC4_Stock_Kernel.tar.md5 or G900A_OA1_Stock_Kernel.tar.md5 and then you should be able to get into recovery. This of course has not worked for me.
Does anyone have any idea how I might go about getting this phone to boot into recovery? Also is it possible to have the local AT&T store re flash 5.0 on the phone.
I know it is a risk buying soft bricked phones but I sure would not like to have an expensive paper weight.
Click to expand...
Click to collapse
Its hard to tell what version it was on previously since recovery wont even boot, but from how its acting i'd say it was on LP and bricked for a KK flash, so you flashing NCE(Kitkat) is doing zilch. Seeing as there is no option for you to root, and im assuming you arent interested in that anyway, i would just take it to bestbuy or the att store and get them to reflash it, just say you got it off ebay and it was like that.
Sent from my Tw5ted SM-G900A using Tapatalk
I took the phone to BestBuy and the guy there flashed it with 5.0.1 with the same results. Boots to the Recovery Booting. . . . screen for about 30 seconds and then reboots. My daughter is taking it to an AT&T repair center to see if they have any better luck.
Have you tried flashing the boot image?
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Boot image. Not sure which file you are talking about.
Could you give me a little more information or a link to the file?
Re: Softbricked AT&amp;amp;amp;amp;T Galaxy S5
If you have the oc4 update zip, in the zip should be a boot image, create an md5 tar file from it then flash in AP. If that doesn't work, you flashed a bad kernel and may have to use jtag to fully recover. Or bring it to a repair facility to have them do it.
My daughter took the phone to an AT&T repair center and they also could not successfully flash the phone. The only OC4 update i have found is the G900AUCU3BOC4_OneClick..exe update and I do not believe I can extract the boot image from that update. Is there another source of the OC4 update available where I could obtain the boot image.
Thanks for the help everyone.
I'll look for the DL link. But if they tried flashing it, and it didn't work. You may be SOL.
Bogiemaker said:
I purchased a soft bricked sm-g900a phone off of Ebay with the idea of using Odin to reflash and recover the phone. Since the phone was purchased soft bricked I do not have a history on what firmware was running on the phone or what the previous owner flashed that may have caused the phone not to boot to the OS or into recovery. I am assuming the previous owner was on 5.0 and tried to downgrade and ran into problems.
Short description of the current state of the phone:
1. Phone will boot into Odin Mode and can be flashed using Odin.
2. Phone will start to boot to recovery but sticks at "Recovery Booting. . . ." and reboots after about 30 seconds
3. Phone boots to Samsung logo and reboots after about 30 seconds.
What works:
Using Odin I can flash the following without errors: After flashing the phone exhibits the behavior above.
G900A_OC4_Stock_Kernel.tar.md5,
G900A_OA1_Stock_Kernel.tar.md5
G900A_OC4_Stock_Modem.tar.md5,
G900A_OC4_Stock_Partitions.tar.md5
G900AUCU3BOC4_OneClick..exe - reboots to recovery and "Recovery Booting. . . ."
I can flash SM-G900A_pit.pit with Odin 3.07 but not 3.09 or 3.10.
What does not work.
Tried flashing G900A_Downgrade_to_NCE.tar.md5 - Odin reports error
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
Phone reports errors
SYS REV CHECK FAIL :Refer 2> Binary 1
SECURE CHECK FAIL : System
Tried flashing SM-G900A 4.4.2 G900AUCU1ANCE Firmware - AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 in AP slot
Same errors as above .
Tried to use Kies to recover the phone. It goes through the process of recovering with 4.4.2 and crashes about the same place flashing wit Odin does.
I assume if I could get into recovery to do a factory wipe I would be able to get the phone to boot. I have read multiple forum posts and blogs on getting the bricked phone to work where most recommend flashing G900A_Downgrade_to_NCE.tar.md5 and then if you can't get into recovery to flash either G900A_OC4_Stock_Kernel.tar.md5 or G900A_OA1_Stock_Kernel.tar.md5 and then you should be able to get into recovery. This of course has not worked for me.
Does anyone have any idea how I might go about getting this phone to boot into recovery? Also is it possible to have the local AT&T store re flash 5.0 on the phone.
I know it is a risk buying soft bricked phones but I sure would not like to have an expensive paper weight.
Click to expand...
Click to collapse
Hello! OP...are you still around?
Did you ever recover this phone?
I was in the same situation...maybe worse...and I was finally able to recover it.
Please let me know what happened with yours?
THANKS!
jebep said:
Hello! OP...are you still around?
Did you ever recover this phone?
I was in the same situation...maybe worse...and I was finally able to recover it.
Please let me know what happened with yours?
THANKS!
Click to expand...
Click to collapse
How did you recover yours?
ODIN MODE
PRODUCT NAME: SM-G925A
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 0 (0X0000)
AP SWREV: B: 4 K: 3 S: 3
Good evening,
First time poster long time reader/browser. Before posting this message I have read all other posts/threads in an attempt to fix this issue. Long story short I busted my old Samsung Galaxy S6 Edge SM-G925A AT&T and bought this one used online. The seller never mentioned it was bricked as all pictures posted of it showed it operating and at least booting up. When I received phone I turned it on and it is stuck in a boot loop. I have tried to boot in recovery mode by pressing VOL UP+HOME+POWER button and it does nothing. I am only able to boot into download mode. I have attempted to flash multiple stock firmwares which 3 have been successful and passed in ODIN, however once they pass and the phone reboots it is still stuck in a boot loop. I have been successful in flashing the below firmwares. I do not know anything about the phone besides the IMEI number, S/N, SKU and manufactured date. I do not know what firmware was on the phone originally and do not know what was flashed on phone when I received it (I'm assuming phone was flashed or rooted before due to the above stating SYSTEM STATUS: CUSTOM) Am I stuck with a bricked phone? I've attempted flashes with PIT Files, w/o PIT FILES, with just the AP file, with all 4 BL, AP, CP and CSC files and each time it gets in a bootloop. Can someone please assist me? I've read that sometimes all is needed is to wipe the cache in recovery mode and that would clear bootloop, but I cannot get into recovery mode. Any suggestions. Again, below are what I've flashed successfully but continues to bootloop. Thank you all in advance.
G925AUCS5DPJ1--SUCCESSFUL ODIN FLASH-STILL BOOTLOOP
G925AUCU3BO12--SUCCESSFUL ODIN FLASH-STILL BOOTLOOP
G925AATT3BOJ7--SUCCESSFUL ODIN FLASH-STILL BOOTLOOP
I will say after flashing the DPJ1 files I can no longer flash the BL file for either of the 2 firmwares below it (the AP, CP and CSC files all still flash successful).
I'm just about to give up and shell out the money and buy new phone. Was just hoping someone on here could provide me some advice, some sort of miracle file or a way I can odin flash a tar/md5 file that will wipe my cache/system cache like it would as if you did it in recovery mode.
OH! Also Samsung Smart-Switch will not recognize the phone. I'm able to input the model name and S/N in the emergency software initialization but as soon as I input the S/N and click ok it immediately crashes and closes out Smart-Switch. Thanks Guys!
Paul
You need to find a Marshmallow odin file. The phone has most like;y already been updated to Marshmallow in the past. Once on MM, you cant go back to Lollipop which is what those 3 files you listed are.
Edit, NM....that PJ1 file is marshmallow. Try taking it to Best Buy and having them reflash it with the latest MM file.
Thank you, I will try that. I have tried taking to AT&T but they wouldn't help at all. They said since I'm not AT&T customer then I'd have to go thru Samsung. I'm aggravated. I've been working on this off and on for 3 months now. Thanks again for the reply. I've read a lot of people saying after wiping cache partition and rebooting it fixed bootloop after successful flash.
You said I could go back to Lollipop. If I use anything other than the 3 files I listed Odin will fail with various,
Secure Check fail message. Do you know if anyone has created a Odin file that will successfully wipe the cache partition like it would via system recovery?
Thanks again for the reply.
Any updates on this ? I'm having the same issue with my G925I.
why don't you try to flash the DPK5 update from ODIN in the nougat update thread. that's the latest ODIN file I think
saketkutta said:
why don't you try to flash the DPK5 update from ODIN in the nougat update thread. that's the latest ODIN file I think
Click to expand...
Click to collapse
No matter what I flash , it's always stuck on the s6 edge logo.. And I can't enter any recovery be it stock or custom recovery. All I can do is enter download mode and flash official ROMs but none seem to work.
Thats some unfortunate situation. I don't know what to do. If official roms don't boot then it's permanent brick I think. Any senior devs know what to do?
Sent from my SAMSUNG-SM-T337A using Tapatalk
I am suffering from the similar fate,, its a friend mobile whose stuck on Samsung logo, he tried to fix it with Kies and Smart Switch and it did not workout for him.
The phone does not boot into recovery. I tried flashing G925AUCU1AOCE and G925AUCU3BOJ7 stock firmwares but no luck.
I successfully flashed G925AUCU6EQCF but it is still stuck on Samsung Logo
Any help or suggestion would be welcome
edit 3rd: Ok now I have managed to flash G925AUCS5DPJ1, still it won't boot into recovery and it is looping to Samsung logo
Same for me ... The recovery is not accessible and the phone reboots in a loop, Smart Switch tell me that the S / N does not match the phone model ...
Hi i was trying to convert my tmobile n960u 512gb to u1 firmware but system keeps getting stuck on system.img.ext4 for hours no luck. When i try to flash back to stock rom it gets stuck at vendor.img.ext4 no matter what roms i try it doesnt flash all the way. any help guys. Orginally the firmware on the phone was N960USQS2CSGB and i am flashing with patched odin.
Thanks
uzairf said:
Hi i was trying to convert my tmobile n960u 512gb to u1 firmware but system keeps getting stuck on system.img.ext4 for hours no luck. When i try to flash back to stock rom it gets stuck at vendor.img.ext4 no matter what roms i try it doesnt flash all the way. any help guys. Orginally the firmware on the phone was N960USQS2CSGB and i am flashing with patched odin.
Thanks
Click to expand...
Click to collapse
whats the new u1 ure flashing to?
also maybe ure usb cable is at fault. also if ure on win 10 make sure ure on max performance in power settings.
and lastly mabe a bad downlaod. check checksum. maybe use samfirm tool v0.3.6 to dl u1 firmware
I tried All sorts of cables on the laptop. On my desktop odin sees the port but doesnt flash at all just says completed or gets stuck on initializing. The firmware that completes all the way till the end and gets stuck is N960USQU2CSI1_CCT. Also i tried to write the orginal firmware i was on but it gets stuck on vendor.img.ext4 and nothing happens. At the moment im trying to download the latest tmboile CSI1 version to see if it flashes.
uzairf said:
I tried All sorts of cables on the laptop. On my desktop odin sees the port but doesnt flash at all just says completed or gets stuck on initializing. The firmware that completes all the way till the end and gets stuck is N960USQU2CSI1_CCT. Also i tried to write the orginal firmware i was on but it gets stuck on vendor.img.ext4 and nothing happens. At the moment im trying to download the latest tmboile CSI1 version to see if it flashes.
Click to expand...
Click to collapse
what exact version if Odin are you using?
also state the exact files you are loading in each slot in the odin app.
3.13.3b patched version that i got from the forum.
uzairf said:
3.13.3b patched version that i got from the forum.
Click to expand...
Click to collapse
and?
bober10113 said:
also state the exact files you are loading in each slot in the odin app.
Click to expand...
Click to collapse
Bl tab : BL_n960USQUSCSI1
AP TAB: AP_N960USQU2CSI1
CP TAB: N960USQUS2CSI1
CSC TAB: CSC_OMC_OYN_N960UOYN2CSI1
I have 2 more files Home_csc_OMC_OYN
Userdata_TMB_N960USQS2CSGB
i only try to load 4.
Thanks
uzairf said:
Bl tab : BL_n960USQUSCSI1
AP TAB: AP_N960USQU2CSI1
CP TAB: N960USQUS2CSI1
CSC TAB: CSC_OMC_OYN_N960UOYN2CSI1
I have 2 more files Home_csc_OMC_OYN
Userdata_TMB_N960USQS2CSGB
i only try to load 4.
Thanks
Click to expand...
Click to collapse
try adding userdat in the last slot/tab
plus again besure your files arent corrupt.(validate checksum or re downlaod with samfirm tool)