Database Develop

Help with Bootloader and Root. I'm stuck! XT1063

Hello!
I'm from Puerto Rico, my carrier is Claro PR. I've been trying to root my device but so far I haven't even been able to unlock the Bootloader. I get the annoying and indefinite < waiting for device > message on the Fastboot CMD screen. I have installed ADB drivers from Google and it didn't help since the Motorola drivers did not even recognize my device in Fastboot. It seems that the only time my device is recognized in Fastboot mode is when there are no ADB or Fastboot drivers installed and Device Manager lists it as a Fasboot Titan device. Quite honestly this is very frustrating since I've been searching for days to no avail. I do not wish to update to Lollipop(Until it is available officially in my area), which is what most articles I found are for. I just want root access. I'm beginning to doubt if my device is even supported and its just an extremely well made clone.
I was trying this on Windows 8.1 Pro x64. Some people told me Fastboot drivers had some issues with 8.1 so I did my best to clean out old drivers and plug the phone into different USB ports. At first I was trying on my USB 3.0 ports, people also told me USB 3.0 has issues with FB, so I used my 2.0 ports on the front of my computer case. Again, people told me that I had to use ports directly on the motherboard, so I plugged the phone into my PC's back USB ports. I also tried a different micro USB cable, same result. At that time I figured it was probably Windows causing the problems so I pulled a hard drive from and old PC, hooked it up to my own and installed my old copy of Windows 7 Ultimate x64. I installed all the essentials, from ADB to Motorola Device Manager for the drivers. My phone is still not being recognized, although I did get to have it listed under ADB Devices by using USB Debugging, yet it appears offline, as shown in the image below. I figured it was my particular PC because its custom built with salvaged parts from another PC, so I tried the procedure from my family's Dell Optiplex (running win7 Home Premium x32) only to hit the same dead-end. At this point I'm tearing off hair from my head. I don't want to be bald yet! I'm only just turning 20 at the end of the month!
A few details:
Device: Moto G 2014 16GB XT1063. Android Kitkat 4.4.4 (5.0 has yet to be released for my area)
System Version: 21.11.14.titan_amxpr.amxpr.en.PR amxpr
Build number: KXB21.85-14

Inquisitor956 said:
yet it appears offline
Click to expand...
Click to collapse
If you connect your device with usb-debugging enabled in the developer options, a dialog pops up, presenting a RSA fingerprint, asking to allow usb-debugging. If not, type "adb version" in your terminal. If version is below 1.0.31 you have to update adb.

doppelhelix said:
If you connect your device with usb-debugging enabled in the developer options, a dialog pops up, presenting a RSA fingerprint, asking to allow usb-debugging. If not, type "adb version" in your terminal. If version is below 1.0.31 you have to update adb.
Click to expand...
Click to collapse
Thanks solved a problem I had on other laptop that would not show phone

doppelhelix said:
If you connect your device with usb-debugging enabled in the developer options, a dialog pops up, presenting a RSA fingerprint, asking to allow usb-debugging. If not, type "adb version" in your terminal. If version is below 1.0.31 you have to update adb.
Click to expand...
Click to collapse
Thank you! The RSA Fingerprint popup never appeared on my phone. I kept toggling USB Debugging on and off until it did. I managed to get the keys. Now I hit another wall... (image below)
I also tried it onto the Latin America page. This time no matter how I paste my code whether manually typing it or just copy/pasting, it always returns a popup with "Your input text was not recognized as a valid dataset. Please try again." This happens on Chrome, Firefox and even Internet Explorer and combined with the really slow loading of any official Motorola page I try to enter I'm guessing the forces of life itself are preventing me from unlocking this particular phone's Bootloader.

Inquisitor956 said:
preventing me from unlocking this particular phone's Bootloader.
Click to expand...
Click to collapse
Please have a look here: https://forums.motorola.com/posts/f2061da875

doppelhelix said:
Please have a look here:
Click to expand...
Click to collapse
Thank you once again! My device IS unlockable, I was told to wait for some time before requesting my unique unlock key, since the page has been having a few hiccups. I will report back if I was successful or not.
Edit: I successfully unlocked bootloader, installed TWRP and rooted. Thank you for your assistance!

Can't connect to HiSuite

Running stock Vodafone EVA-L09C02B137
Developer mode enabled,
USB debugging enabled
"All HiSuite to use HDB" enabled
connect phone to PC - PC auto-detects phone, installs hisuite etc.
Run hisuite and get "Please authorise your computer to manage your device" with a picture of the phone which says "Allow connection in HDB mode" - which I don't get on the device.
I've been through the forum and uninstalled everything, restarted both PC and phone, installed the APK from the hisuite program files folder, enabled files and photos mode (both work correctly in explorer) but can't get through to hisuite.
Any help would be appreciated.

i have the same problem since yesterday
p9 is on nougut b361
hisuite cant connect to the phone
but it shows as a separate drive and i can move files
only hisuite wont connect to the phone

the same problem here
i have the same problem since i got the nougat update. maybe is has the problem the branded vodafone model ( which is mine as yours) but i haven't found any solutions. if you have found something, it would be great. thanks a lot

Kostas3ara said:
i have the same problem since i got the nougat update. maybe is has the problem the branded vodafone model ( which is mine as yours) but i haven't found any solutions. if you have found something, it would be great. thanks a lot
Click to expand...
Click to collapse
I have the same problem here....

The Same Here !!
I came back from vacationd and after some updates Huawei did (actually its the latest version), my phone won't connect to computer using HiSuite.
So i went to this site and Downloaded the previous version of HiSuite . https://hisuite.software.informer.com/versions/
Uninstalled the latest version from my mobile and from my computer --> rebooted my phone (no i didn't rebooted the computer.)
I downloaded the version 5.0.2.301 (it's the previous version)
Installed it on computer !!!
When you will be asked to upgrade DO NOT UPGRADE !!!
Follow the rest of procedures and it will work...

adb problems

I am on a quest to root my phone and i want to unlock bootloader ect... since no application can do this i need to use adb fastboot
i am using a chromebook Acer 15 developer options open all that etc...(i beileve all needed) when moto e5 plus plugged in by data usb cord and tryin to connect by adb devices command it gives me a List of devices attached
ZL522BQ46M unauthorized (did same for my lg g6 but not a galaxy or zte) also it doesnt show up in my files as a attached device or outside storage unit but about 10 mins prior to this it had shown up as attaced but kept dis connecting causing multipule file windows to apper. i hace searched it multiple times on many diffrent acasions and have tried many "fixes" please can i get some assistance.

Enabled developer options
System->About Phone-> Scroll to bottom and TAP on BUILD 5x (I believe)
then go back once , Developer options , Enable USB DEBUGGING , Authorize your Device and you should be able to proceed onto the bootloader unlocking guide on Motorola's Website

whodat711 said:
Enabled developer options
System->About Phone-> Scroll to bottom and TAP on BUILD 5x (I believe)
then go back once , Developer options , Enable USB DEBUGGING , Authorize your Device and you should be able to proceed onto the bootloader unlocking guide on Motorola's Website
Click to expand...
Click to collapse
Still not working. Re set the Chromebook even rest the phone. Did everything from the start did the Linux applications restarted the Chromebook didn't go with the Linux applications even got the ADB extensions for the Chromebook and nothing will work still says no permissions when it pulls up the phone I don't know. This isn't like I'm totally brand new to this just never used a Chromebook thanks for your help anyway

i solved the issue with the no permissions in adb. a few minor issues i should of noticed and actually taking the time to think the problem through solved it......
but i somewhere messed up when rooting my phone (shouldnt of been drinking and thought i could still do it...) and know i am in a reboot coming out of my bootloader... will not boot into my recovery whrn it dows its only for a few seconds and the command lines runnung it says that script is finishing but it quickly reboots to a black screen that says bad key and reboots then says n a on it. fastboot will not do anything but say waiting on device. so...... i guess i got a project for a few days

Redmagic 3S Device Corrupt, debugging mode is not activated Help

Hello everyone, first of all thanks for your advice,
I have a Global RM3S, I updated to the Chinese version with android 11 with the debugging options activated and of course the active oem unlocking,
but I had errors in some applications for changing from global to Chinese so I did a factory reset and it worked excellent,
but for my work I needed a special application and with the Chinese version it didn't work, so I had to go back to the global version,
but when doing it from the recovery it gave me the error "DEVICE CORRUPT "I read in another thread that I had to unlock the OEM
before loading the rom in order to unlock the bootloader and thus repair my computer, I don't have much experience in this matter so I don't understand what to do, can you help me?
T_T my phone has been like this for two weeks and the local technicians say they can't repair it, I wanted to buy another logic card but I can't find anything,
I urgently need to repair my phone because I don't have another, and I need it to dial from my entry, sales, exits, etc. , from my work, greetings to all.

I tell you, I have the drivers well installed on my pc, fastboot detects my device without problem, also when trying the steps to copy the files from the Chinese or global rom, it does not give any error but it always returns to "DEVICE CORRUPT"
if I try to unlock via FASTBOOT with
fastboot oem nubia_unlock NUBIA_NX629J
no problem but with
fastboot flashing unlock
tell me error

Come pm to can help u

RZaR2001 said:
Come pm to can help u
Click to expand...
Click to collapse
Hello,
I am facing the same problem please help me my laptop is not recognizing my phone while using twrp
please help

ashwin_dutt123 said:
Hello,
I am facing the same problem please help me my laptop is not recognizing my phone while using twrp
please help
Click to expand...
Click to collapse
Can you provide screenshot from drivers?
is it detected by adb driver or not?
sometimes what i am doin on windows is reinstalling adb driver (uninstall and reinstall)
if you cannot do anything, do fastboot and try brick tools that provide in forum to restore anything to global rom, and reflash again on CN ROM

أنا Unlock bootloader but my devices is corrput

Huawei Nova 2 Plus Bootloader Unlock (Solution)

Hello Developers!
I have found an easy way to unlock the bootloader of our Huawei Nova 2 Plus. No need to use Testpoint or pay for software to unlock. it is an Python Script which would brute force the code through the IMEI number you have entered
IMPORTANT: MAKE SURE THE PHONE IS CONNECTED TO ADB OR THIS TOOL WILL NOT WORK AS IT WILL RESTART INTO FASTBOOT AND TRY ALL THE CODES IT GENERATED!!!!!!!.
THIS TOOL WORKS FOR Linux and Windows. the guide is for windows but the script would work for linux completely fine.
REQUIREMENTS
Download The Tool from the thread
Install Python From Microsoft Store Or The Python Website
Run Powershell as Admin
Run the Command:- python unlock.py
Enter Your IMEI Number
MAKE SURE YOUR PHONE IS CONNECTED TO ADB!!!!!
Wait for the code to be found
If your phone reboot into EMUI reboot back into bootloader mode and the tool will start the bootloader unlocking process
The Phone May Reboot Several Times.
If you get an warning about unlocking the bootloader you have succeeded to unlock the bootloader
Special Thanks To KASHIFALIKHAN For the tool . the download will be down below​

Hello does unlocking bootloader resets my data? As in will it factory reset?

Yes it would reset your data. It happens on all phones for security reason

deleted

Hello..could you please explain more about the process and what should we do about attached file?

you have to extract the ZIP and run the unlock script and enter your imei number make sure you have python installed on your PC

TMHAKIM said:
you have to extract the ZIP and run the unlock script and enter your imei number make sure you have python installed on your PC
Click to expand...
Click to collapse
Thank you for your answer..
So ,unlocking bootloader resets my data..
My phone is nova 3i android 9 LX2..
Is this procedure safe for my phone?
Have you tried it on this model?

Hello,
I have a chinese Honor 9x (bought from alieExpress). I currently have the HarmonyOS installed that doesn't allow me to run any google-apps, so I'm trying to unlock the bootloader. Out of desperation I tried to use this program to try bruteforce the unlock code. However as I start running it (USB debug enabled and all in options), after the first reboot it arrives in fastboot mode (as I believe should be expected), but then it gives the error that no devices have been found, and therefore remains hanging at 10% / first code tried.
I have a feeling that somehow after the reboot the usb debugging/OEM mode is not on anymore and therefore the python program doesn't identify the phone. I feel this has to do with the setting "enable OEM mode" not being available in any of the settings in my phone (probably a little chinese easter egg to make all this more difficult?). I don't really know how to tackle this issue tho, any advice is appreciated.

honorable9x said:
Hello,
I have a chinese Honor 9x (bought from alieExpress). I currently have the HarmonyOS installed that doesn't allow me to run any google-apps, so I'm trying to unlock the bootloader. Out of desperation I tried to use this program to try bruteforce the unlock code. However as I start running it (USB debug enabled and all in options), after the first reboot it arrives in fastboot mode (as I believe should be expected), but then it gives the error that no devices have been found, and therefore remains hanging at 10% / first code tried.
I have a feeling that somehow after the reboot the usb debugging/OEM mode is not on anymore and therefore the python program doesn't identify the phone. I feel this has to do with the setting "enable OEM mode" not being available in any of the settings in my phone (probably a little chinese easter egg to make all this more difficult?). I don't really know how to tackle this issue tho, any advice is appreciated.
Click to expand...
Click to collapse
Have you installed Hisuite drivers? And check device manager when you boot into fastboot if it shows Android bootloader interface then you're good to go if not then try installing Hisuite drivers

honorable9x said:
Hello,
I have a chinese Honor 9x (bought from alieExpress). I currently have the HarmonyOS installed that doesn't allow me to run any google-apps, so I'm trying to unlock the bootloader. Out of desperation I tried to use this program to try bruteforce the unlock code. However as I start running it (USB debug enabled and all in options), after the first reboot it arrives in fastboot mode (as I believe should be expected), but then it gives the error that no devices have been found, and therefore remains hanging at 10% / first code tried.
I have a feeling that somehow after the reboot the usb debugging/OEM mode is not on anymore and therefore the python program doesn't identify the phone. I feel this has to do with the setting "enable OEM mode" not being available in any of the settings in my phone (probably a little chinese easter egg to make all this more difficult?). I don't really know how to tackle this issue tho, any advice is appreciated.
Click to expand...
Click to collapse
Since you could enter the bootloader when you first trying, I'm guess it might be the Harmony OS. You can try use Hisuite to roll back your HarmonyOS to EMUI, then try to unlock the bootloader. Most of modified Android OS removed the OEM mode to make you have a hard time on unlock bootloader. These will be really easy if you use some phones like Google's Pixel.
I have an old Huawei Nova 3i and it's updated into the Harmony OS, which is not what I want, I'd like to have a more cleaner OS that not with so much preinstalled apps. Then I roll back to EMUI as the first step to install other ROM, and that script it's working now. It's still trying get the password so I can't say it worked or some thing else.
And alter is that, if you just want install some google-apps, you may just roll back to EMUI, it should worked fine. And I'm not really suggest you have any phone from Huawei now since they really push their Harmony OS as a thing (at least, in China) and not really friendly towards people not in China (since lots of popular apps' depended G-apps). I'm annoyed even I'm Chinese though.