Related
Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks
did you use PIT and check REPARTITION when you flashed back to JPY ??
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....
right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.
probably samfirmare.com ?
yeah just been looking on there they all seem to be 1 file
Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?
install another firmware like jpjpa with 3 files and then flash xxjpy on it
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Will kies be of any help if i put phone in download mode and attach it with kies?
well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,
zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA
How to get three files as it is only 1 exe file?
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on
ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.
(TUT) FLASHING ODIN VIA ONE PACKAGE
who have problem on flashing firmware one package that get stuck on 'setup connection' or get 'failed' ..
there have a solution for who didn't know..
download firmware from www.sammobile.com
need samsung usb driver to detect phone and odin.
or install samsung kies.
then need odin3 .. i have it..
from '[email protected] thanks to him..
and here is the new odin3 v 3.07 http://www.4shared.com/zip/_OYyK4Sq/Odin3_v307.html ..
and put the file on PDA without .pit file and no need to tick or click anything..
just let it like that..
sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..
SemBoyHehe said:
who have problem on flashing firmware one package that get stuck on 'setup connection' and get 'failed' .. there have a solution for who didn't know.. download firmware from www.sammobile.com then need odin3 .. i have it.. from '[email protected] thanks to him.. and here is the new odin3 v 3.07 http://www.4shared.com/zip/C7LtcIw3/Odin3_V307.html .. and put the file on PDA without .pit file and no need to tick or click anything.. just let it like that.. sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..
Click to expand...
Click to collapse
I was tested it a few moment ago and i must say . . . IT WORKS !! For newbies and noobs, you must put the *.tar.md5 (the rom file) only in PDA section and select START only if you plugged in your phone is in Download Mode and of course +1 for you
Alucard1989pl said:
I was tested it a few moment ago and i must say . . . IT WORKS !! For newbies and noobs, you must put the *.tar.md5 (the rom file) only in PDA section and select START only if you plugged in your phone is in Download Mode and of course +1 for you
Click to expand...
Click to collapse
don't forget tell all n click the thanks button if i helped..
SemBoyHehe said:
who have problem on flashing firmware one package that get stuck on 'setup connection' and get 'failed' .. there have a solution for who didn't know.. download firmware from www.sammobile.com then need odin3 .. i have it.. from '[email protected] thanks to him.. and here is the new odin3 v 3.07 http://www.4shared.com/zip/C7LtcIw3/Odin3_V307.html .. and put the file on PDA without .pit file and no need to tick or click anything.. just let it like that.. sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..
Click to expand...
Click to collapse
Thanks alot for this tutorial
easy and quite helpful.
you and rafael just saved my aceI :good:
Thanks
soumik shah said:
Thanks alot for this tutorial
easy and quite helpful.
you and rafael just saved my aceI :good:
Thanks
Click to expand...
Click to collapse
small problem man.
Bro just wnted to ask that i am on Jelly blast rom now and want to move on stock rom so i have the firmware and odin v3.0.7 so just i hav to
1.go to download mode
2.just choose the pda file
3.connect cell to pc
4.click start??
m i right?
aniket123 said:
Bro just wnted to ask that i am on Jelly blast rom now and want to move on stock rom so i have the firmware and odin v3.0.7 so just i hav to
1.go to download mode
2.just choose the pda file
3.connect cell to pc
4.click start??
m i right?
Click to expand...
Click to collapse
Yes
yes. if can. flash multi package.
Sad
SemBoyHehe said:
yes. if can. flash multi package.
Click to expand...
Click to collapse
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!
aniket123 said:
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!
Click to expand...
Click to collapse
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??
SemBoyHehe said:
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??
Click to expand...
Click to collapse
Country-India-INS
Multi Pakage goes tough for me or if you are free can u give me the steps????
aniket123 said:
Country-India-INS
Multi Pakage goes tough for me or if you are free can u give me the steps????
Click to expand...
Click to collapse
Download the firmware of your choice from here:
http://forum.xda-developers.com/showthread.php?t=1822109
You can use Odin 1.84 or 3.07.
PDA goes in PDA
Phone in Modem
CSC in CSC
Don't touch anything else.
1.84 need pit. without .pit it will fail
3.07 is better no need .pit file.
SemBoyHehe said:
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??
Click to expand...
Click to collapse
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:
aniket123 said:
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:
Click to expand...
Click to collapse
Bootloader..?? Where did you get that?
What error you are getting?
aniket123 said:
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:
Click to expand...
Click to collapse
Are u read my 1st post? Why use odin 1.84?? Use odin v3.07. No need put .pit just put pda, modem and csc only. Hmm. Read first man.
aniket123 said:
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!
Click to expand...
Click to collapse
if you are using windows 7.then while opening odin,,donot double click.right click first then select RUN AS ADMINISTRATOR.....it wont fail then..i guess
SemBoyHehe said:
Are u read my 1st post? Why use odin 1.84?? Use odin v3.07. No need put .pit just put pda, modem and csc only. Hmm. Read first man.
Click to expand...
Click to collapse
Brother i have done it with odin v3.0.7 as well as odin v1.8.4
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
Ankur19 said:
if you are using windows 7.then while opening odin,,donot double click.right click first then select RUN AS ADMINISTRATOR.....it wont fail then..i guess
Click to expand...
Click to collapse
User of Windows XP
Thanxx..
Sent from my GT-S5830i using xda premium
....
Hit ThanX If I helped you !!
Lalit Patil said:
Thanxx..
Sent from my GT-S5830i using xda premium
....
Hit ThanX If I helped you !!
Click to expand...
Click to collapse
did that help??
Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany
roxy2906 said:
Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany
Click to expand...
Click to collapse
I need it too, pleeeeeese :fingers-crossed:
Use the file at the bottom of the page h t t p:/ / forum.xda-developers.com/showthread.php?t=1987976&page=2 . The param.tar file. I had the same problem and for me worked. Now my phone is "alive". Flash it with Odin 1.85 as PDA file.
zeek12 said:
Use the file at the bottom of the page h t t p:/ / forum.xda-developers.com/showthread.php?t=1987976&page=2 . The param.tar file. I had the same problem and for me worked. Now my phone is "alive". Flash it with Odin 1.85 as PDA file.
Click to expand...
Click to collapse
I had tried, but now I have the splash screen "Samsung SII i9100"!
Can I fix??
On my device, then, doesn't work Triangle away ("Magic header not found. Incompatible device?).
For you in the same?
http://forum.xda-developers.com/showthread.php?t=2034357
Here you go. PIT file for re-partition I8190 -> http://www.mediafire.com/?5tc1l0d3z6x2awk
Can you re upload it again? Media fire link isnt working....
Look at 1st post there's a link for Pit file, just seen it. Look where it says No Pit partition, there's link in there.
Sent from my GT-I8190 using xda premium
Pit File for s3 mini
roxy2906 said:
Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany
Click to expand...
Click to collapse
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
doesn't work on i8190N
Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
this pit file doesn't work with i8190N it say
SM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
my phone turns on but stuck at logo
Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
Tried this pit file to remove a i9100 splash screen on a standard I8190 but no luck.
Anybody have any ideas please?
Flash this via CWM/TWRP
Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
thanks my friend, I hope it's work.
opoel34 said:
thanks my friend, I hope it's work.
Click to expand...
Click to collapse
did it work??
Sent from my GT-I8190 using xda app-developers app
PIT GT-i8190L
Benzonat0r said:
Flash this via CWM/TWRP
Click to expand...
Click to collapse
andr0id_n00b said:
did it work??
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I need the pit file for my s3 mini GT-I8190L Help me plz
Is there any way to pull the pit from the phone?
woopdedoda said:
Is there any way to pull the pit from the phone?
Click to expand...
Click to collapse
Yes, a simple google can help you
AssToast said:
Yes, a simple google can help you
Click to expand...
Click to collapse
Yeah I looked really quickly but didn't see it, just tried again and found it. Thanks.
I spoke too soon...
@AssToast sorry jumped the gun, I found this but it can only edit and create new pit's. Can you post any links that you know of?
woopdedoda said:
@AssToast sorry jumped the gun, I found this but it can only edit and create new pit's. Can you post any links that you know of?
Click to expand...
Click to collapse
Install Heimdall, follow the instructions here
then read the 2nd post on how to do that http://forum.xda-developers.com/showthread.php?t=1957552
Hello all
I own a galaxy music S6010 that has problems with connection (ot stable).
I saw a new rom release in samfirmware (XXALJ6) how can I flash it? Odin??
Thanks
Pietro
Sure. Odin to flash everything with sam devices
tropbel said:
Sure. Odin to flash everything with sam devices
Click to expand...
Click to collapse
But do we need some file/configuration to use it with s6010 or can i use odin "stock"?
Sent from my GT-I9300 using xda app-developers app
Hello all
I'm here again
I downloaded the firmware file from sammobile.
It's a Zip containing two files:
S6010XXALJ6_S6012OXXALJ2_S6010XXLJ1_HOME.tar.md5
and
SS_DL.dll
in this thread
http://forum.xda-developers.com/showthread.php?t=1673592
I saw that I can flash the .tar.md5 file with odin but I need a .ops file...
Where can I find it?
No way to extract .tar.md5 file...
I tried to change from .tar.md5 to .tar and then use 7zip or winrar.. NO WAY..
Those program say that they can't open the file..
Help please...
pieri70 said:
Hello all
I'm here again
I downloaded the firmware file from sammobile.
It's a Zip containing two files:
S6010XXALJ6_S6012OXXALJ2_S6010XXLJ1_HOME.tar.md5
and
SS_DL.dll
in this thread
http://forum.xda-developers.com/showthread.php?t=1673592
I saw that I can flash the .tar.md5 file with odin but I need a .ops file...
Where can I find it?
No way to extract .tar.md5 file...
I tried to change from .tar.md5 to .tar and then use 7zip or winrar.. NO WAY..
Those program say that they can't open the file..
Help please...
Click to expand...
Click to collapse
Hi friend, I found a guide searching in Google. You can follow this guide and instead of the mentioned firmware, you can use yours.
Here is the guide, hope it helps
http://www.teamandroid.com/2012/11/...c-s6010-xxalk1-android-404-official-firmware/
Hi arys64
thanks for your reply
Unlukily that guide teach how to flash a classic firmware (pda+csc+pit).
I don't have these 3 files and instead I have a .tar.md5 file that I think has these files inside but at it's end it has the md5 code.
I don't know how to unzip it...
Thank you
pietro
pieri70 said:
Hi arys64
thanks for your reply
Unlukily that guide teach how to flash a classic firmware (pda+csc+pit).
I don't have these 3 files and instead I have a .tar.md5 file that I think has these files inside but at it's end it has the md5 code.
I don't know how to unzip it...
Thank you
pietro
Click to expand...
Click to collapse
Just put the file that you downloaded to pda and that's it. Don't touch anything else.
Hi. Im trying to install TWRP 2.8.7 on a SM-G800H with Odin. Am I supposed to remove the .md5 from the file name? @jackeagle
arkansawdave74 said:
Hi. Im trying to install TWRP 2.8.7 on a SM-G800H with Odin. Am I supposed to remove the .md5 from the file name? @jackeagle
Click to expand...
Click to collapse
Nope...I don't think so..just flash. Tar.md5
matbo said:
Nope...I don't think so..just flash. Tar.md5
Click to expand...
Click to collapse
Oh, that was fast. Thank you. The reason I ask is because the only way the md5 checks out is by removing the.md5 from the file name. I'm new here, and don't see how to send screenshots of the md5 check.
Select AP???
Now, under step 4 it says to select AP and find the tar file, which I'm guessing he means tar.md5 file because thats the file he linked to. But I do not see where to select AP. I can chose PIT, Bootloader, PDA, PHONE, or CSC in Odin 3.07. I see where I can check dump and there's a AP RAM selection box. I wish I could ask in the thread, but new members can't post in development threads.
@jackeagle or anyone who knows....please fill me in here.
I've apparently met the minimum post requirement so I was able to post in the thread and ask about it. http://forum.xda-developers.com/gal...recovery-qualcomm-twrp-2-8-7-0-t3245256/page4
I got it done by the way. WOOHOO!! I'm now rooted, TWRPed, backed up and Busybox installed!!