Related
hi updated my sgx from ultimate rom by kies to the official 2.3.3 but it was not routed i used how to root using xwjvb but it kept booting and rebooting ,so i went in to recovery and flashed with jues rom from this forum ,i thought great it all loaded but as soon as the lock screen comes on it boots back into boot screen and the back to the lock screen again,i am at the end of my tether i have been housr trying to sort this out ,shall i go back to stock rom or is there a cure for this i am eagerly awaiting someones answer many thanks
westentertainer said:
hi updated my sgx from ultimate rom by kies to the official 2.3.3 but it was not routed i used how to root using xwjvb but it kept booting and rebooting ,so i went in to recovery and flashed with jues rom from this forum ,i thought great it all loaded but as soon as the lock screen comes on it boots back into boot screen and the back to the lock screen again,i am at the end of my tether i have been housr trying to sort this out ,shall i go back to stock rom or is there a cure for this i am eagerly awaiting someones answer many thanks
Click to expand...
Click to collapse
i think its a bootloader problem...
flash GB XWJVH : http://dl.dropbox.com/u/19506141/Stock - stock modems/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
this comes with safe bootloaders
with odin : http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
PITT512 is included, check repartition.
foor root acces flash file below in PDA, repartition NOT checked.
http://dl.dropbox.com/u/19506141/Gingerbread-GT-I9000-XWJVH-stock-kernel+hacks.tar
thanks where does flash go in odin i have put pit in pit
did not work i have now got the dreaded phone /caution /pc sign on screen
westentertainer said:
did not work i have now got the dreaded phone /caution /pc sign on screen
Click to expand...
Click to collapse
what did you fill in with the other PDA / PHONE / CSC....
you have to extract the .EXE file
richard2311 said:
what did you fill in with the other PDA / PHONE / CSC....
you have to extract the .EXE file
Click to expand...
Click to collapse
yes i extracted them and put them in the right places in odin but it went through the proces and then stoped ,now i can get into download bot odin does not state conected mmmmmm
westentertainer said:
yes i extracted them and put them in the right places in odin but it went through the proces and then stoped ,now i can get into download bot odin does not state conected mmmmmm
Click to expand...
Click to collapse
try different USB poort, or try other odin version.
it has set partition in first big box
then in message leave cs
enter cs for md5
check md5 do not unplug cable
please wait
checking md5 finished sucsessfuly
leave cs
setup conection
initiliasation
set pit file
do not turn off target
then nothing no movement or phone booting
richard2311 said:
try different USB poort, or try other odin version.
Click to expand...
Click to collapse
wich odin you sugest
westentertainer said:
wich odin you sugest
Click to expand...
Click to collapse
i always use V1.7...never have problems.
but you must not flash when you don't get added in textbox!!
and setting pitfile takes a little while (no to long) so be a (little) patient.
i managed to use EZBASE to get it up and running now ,shall i just conect to kies and get the official stock rom or flash from this rom ???/
westentertainer said:
i managed to use EZBASE to get it up and running now ,shall i just conect to kies and get the official stock rom or flash from this rom ???/
Click to expand...
Click to collapse
never worked with EZbase ??
I tried to flash 2.2 to 2.3 stock via Odin as per the instruction. After the Pass message, disconnected the phone and tried to on the phone but not responding. I also tried to reflash the rom but no luck. My kies is updated and odin vs is 4.38. What happened or missed i dont know. I tried to search the thread too. Please help!!!
Thanks in advance.
Regards,
cjey
cjey said:
I tried to flash 2.2 to 2.3 stock via Odin as per the instruction. After the Pass message, disconnected the phone and tried to on the phone but not responding. I also tried to reflash the rom but no luck. My kies is updated and odin vs is 4.38. What happened or missed i dont know. I tried to search the thread too. Please help!!!
Thanks in advance.
Regards,
cjey
Click to expand...
Click to collapse
Weird problem...try the jig method..Then flash ur rom. Did u make sure u, disconnected only afer pass ?
cjey said:
I tried to flash 2.2 to 2.3 stock via Odin as per the instruction. After the Pass message, disconnected the phone and tried to on the phone but not responding. I also tried to reflash the rom but no luck. My kies is updated and odin vs is 4.38. What happened or missed i dont know. I tried to search the thread too. Please help!!!
Thanks in advance.
Regards,
cjey
Click to expand...
Click to collapse
Can u enter download mode?
Sent from my GT-S5570 using Tapatalk 2
R.A.G.E said:
Can u enter download mode?
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
Yes, i can enter into download mode and odin is working too.
Edit: Once i enter into download mode but now screen is blank.
Regds,
cjey
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
expansion11 said:
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
Click to expand...
Click to collapse
how did you flash? odin or dd method? and is phone name and logo coming?
Brainiac.shri said:
how did you flash? odin or dd method? and is phone name and logo coming?
Click to expand...
Click to collapse
im using odin and i see the logo noting more
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
adamuadamu said:
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
Click to expand...
Click to collapse
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
expansion11 said:
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
Click to expand...
Click to collapse
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Brainiac.shri said:
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Click to expand...
Click to collapse
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Одг: [Q] phone won't boot
expansion11 said:
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Click to expand...
Click to collapse
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
shut_down said:
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Одг: [Q] phone won't boot
expansion11 said:
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Click to expand...
Click to collapse
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
shut_down said:
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks that worked!
Одг: [Q] phone won't boot
expansion11 said:
Thanks that worked!
Click to expand...
Click to collapse
Sent from Galaxy S Advance
so what are you using now? GB or JB? i had that problem too...it booted well jbean and im stuck at seup wizard error pop out... i cant acceess also recovery mode but download mode is ok... im now back at Gbread but i still wanted my cp to be on JBean is there a force mothod? to pass error "unfortunately, samsung setup wizard has stoped?" i had this problem same exact one...
Still problem with booting
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
x-samsung said:
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
Click to expand...
Click to collapse
after flashing.. remove / replace your battery..
try booting in recovery by pressing vol up+home+power at the same time..
then scroll down to factory reset via vol keys..
wipe and restore factory settings..
Hi all,
I have a Galaxy Note with 2.3.x (bought from O2 Germany). After it dusted for some months due to broken USB port, I replaced it today and ran the OTA firmware upgrade. Now the phone is stuck on the logo screen.
I have tried to install cwm recovery CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.zip without knowing that I'd need to install the proper version according to the kernel... well, no way to find out which kernel / os actually runs on the thing, and I can't enter recovery mode, only odin-mode.
Can I somehow dump the userdata or safely upgrade to some stock firmware *without* losing internal data? I dont have backup :/
Thanks
I have tried to install cwm recovery CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.zip
Click to expand...
Click to collapse
God Bless.
toxicthunder said:
God Bless.
Click to expand...
Click to collapse
I'm totally f**d up? Any way to get at least the data off the device and then flash it via Odin?
harddisk_wp said:
I'm totally f**d up? Any way to get at least the data off the device and then flash it via Odin?
Click to expand...
Click to collapse
Download a stock rom and install it with PC Odin on your device in download mode.
Pray.
Tell us if you stuck at "factoryfs.img"
Stop praying.
Start cursing.
ThaiDai said:
Download a stock rom and install it with PC Odin on your device in download mode.
Pray.
Tell us if you stuck at "factoryfs.img"
Stop praying.
Start cursing.
Click to expand...
Click to collapse
Flashed N7000XXLC1_N7000OXALC1_N7000XXLB2, did not get stuck at factoryfs.img (flash went OK), but now stuck with a glowing SAMSUNG logo.
EDIT: I should be more patient. Phone is back and the data are still there
You are lucky you didn't brick.
Sent from my GT-N7000 using xda app-developers app
I have a problem with my Galaxy Gear. It's crashed in an attempt to flash it via Odin, and now, on power up, it tells me "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.", but connecting it to the pc is absolutely not detected by Kies. How should I proceed? Thanks in advance...
bimbazzo said:
I have a problem with my Galaxy Gear. It's crashed in an attempt to flash it via Odin, and now, on power up, it tells me "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.", but connecting it to the pc is absolutely not detected by Kies. How should I proceed? Thanks in advance...
Click to expand...
Click to collapse
Odin to flash the official rom in the state in which you now have a gear :good:
radekklamzynski7 said:
Odin to flash the official rom in the state in which you now have a gear :good:
Click to expand...
Click to collapse
I'm trying it, but the process freezes at bootloader step...
I'm flashing the 2.2.1 Italy rom with Odin 1.85 at default settings
bimbazzo said:
I'm trying it, but the process freezes at bootloader step...
I'm flashing the 2.2.1 Italy rom with Odin 1.85 at default settings
Click to expand...
Click to collapse
Change the version of Odin, for me v3.04 works well...
radekklamzynski7 said:
Change the version of Odin, for me v3.04 works well...
Click to expand...
Click to collapse
no changes... the situation is as above...
now i'm trying to download your same rom...
Exactly ... download rom again, how will I do something wrong it is drivers problem for me ...
radekklamzynski7 said:
Exactly ... download rom again, how will I do something wrong it is drivers problem for me ...
Click to expand...
Click to collapse
Thank you very much... Problem was rom version
Same here
bimbazzo said:
Thank you very much... Problem was rom version
Click to expand...
Click to collapse
Hi! I am in exactly same situation now. How should I choose the version? What was yours and what was wrong with it?