Is here any custom kernel for lollipop version of galaxy S4 active?
rs tony said:
Is here any custom kernel for lollipop version of galaxy S4 active?
Click to expand...
Click to collapse
If you're asking about the international version (i9295), then almost certainly yes, look through the development and original development sections and you'll find a few. If you're asking about the US/AT&T version, then unfortunately no. We have a locked bootloader and any attempt to flash a custom kernel (or a rom with a custom kernel, or a custom recovery) will cause a soft brick
thisisapoorusernamechoice said:
If you're asking about the international version (i9295), then almost certainly yes, look through the development and original development sections and you'll find a few. If you're asking about the US/AT&T version, then unfortunately no. We have a locked bootloader and any attempt to flash a custom kernel (or a rom with a custom kernel, or a custom recovery) will cause a soft brick
Click to expand...
Click to collapse
Didnt find any. Can u post link?
Related
I have a galaxy note with italian baseband. My question is can I flash it with another region's firmware (asian firmware)?
Yes you can!
Yes.You can always flash any region firmwares on your phone.But the firmware should belong to your phone model.i.e N-7000 firmwares on N-7000,and I-917 firmwares on I-917.Which means firmwares are devices specific and not region specific
If you cant understand any of the above,the exact answer for your question is yes you can
would this affect my warranty? & flash count? and another question could i directly flash with an older firmware, im currently on 2.3.6 i was wondering if i could flash 2.3.5?
engson said:
would this affect my warranty? & flash count? and another question could i directly flash with an older firmware, im currently on 2.3.6 i was wondering if i could flash 2.3.5?
Click to expand...
Click to collapse
1.It wont affect warrant as long as you are in stock firmware.But if you have a network locked device I'm not sure because I have no network locked device in my region.If you have international unlocked note,you are 100% covered by warranty as long as its stock
2.Stock roms dont increase counter.Only custom roms do
3.You can flash any GB rom when you are in GB(to make it simple IMO)
Does this also apply to other devices?
That it is possible to use different firmwares.
(in this particular case LG optimus black p970)
Yup
Sent from my GT-N7000 using xda app-developers app
Can i flash a differrent region firmware without root?
engson said:
I have a galaxy note with italian baseband. My question is can I flash it with another region's firmware (asian firmware)?
Click to expand...
Click to collapse
Noooooo ..... if u do that it fakes your imei .....
DirtyFredd said:
Can i flash a differrent region firmware without root?
Click to expand...
Click to collapse
Yes you can. You can us Odin for PC to do it. Do some searching on the n7000 forums and you will find all the necessary files and flashing tools.
I recommend checking out this excellent thread by Dr. Ketan http://forum.xda-developers.com/showthread.php?t=1424997
It explains everything in detail so you should be good to go if you read through it properly.
Hope this helped and good luck!
mchandu said:
Noooooo ..... if u do that it fakes your imei .....
Click to expand...
Click to collapse
What? Oh no.
nokiamodeln91 said:
What? Oh no.
Click to expand...
Click to collapse
Seeing posts like his I switch to "relax & ignore"-mode
vijai2011 said:
Yes.You can always flash any region firmwares on your phone.But the firmware should belong to your phone model.i.e N-7000 firmwares on N-7000,and I-917 firmwares on I-917.Which means firmwares are devices specific and not region specific
If you cant understand any of the above,the exact answer for your question is yes you can
Click to expand...
Click to collapse
what if i want to flash an international stock rom in a unlocked sprint note 5??? can I do that?
Marshmallow update for SM-G928I
Hi guys. I have a Samsung Galaxy S6 edge+ (SM-G928I). However, I still didn't get marshmallow update for this phone. Can I flash this phone with a different model firmware? Such as SM-G928F or SM-G928C?
Chathuskadilhan said:
Hi guys. I have a Samsung Galaxy S6 edge+ (SM-G928I). However, I still didn't get marshmallow update for this phone. Can I flash this phone with a different model firmware? Such as SM-G928F or SM-G928C?
Click to expand...
Click to collapse
If they have different hardware then it's a big No.
Can i flash different region's as well as different baseband
I have Samsung Galaxy Core 2 SM-G355HXXU0AOB1 and I live in Pakistan, so if i flash another region's such as India and the baseband will be different, will this effect my phone like the SIM, Carrier and problems like that.??????
And if someone could post the link for my device,, it must be Pak and same one as mine i would be very happy..... becz i was trying to update my cousin's phone (its his phone actually) and i SCREWED UP so the phone jst hangs on first screen (TWRP and Download mode work though) and i cd use some help..........BTW the source was a Marshmallow update which caught my eye ( http ://www .galaxystuffs .net/2016/02/marshmallow-rom-galaxy-core2.html ) if smone wants to check it out and tell me what i did wrong......cz i have to fix it for him its up to me. I think it's BRICKED....
Remove the spaces in the URL plz
i have flashed my S6 to ANDROID MM 6.0.1 "Spint" i have no network now! what should i do?
Flash correct Rom version
Can i flash sm-g920i(s6 asian firmware) on sm-g920t1 ??
Surya5656 said:
Can i flash sm-g920i(s6 asian firmware) on sm-g920t1 ??
Click to expand...
Click to collapse
As long as the hardware is same in both phones.........
does anyone know what the difference is internally between the 2?
What does it take to change an 1537 rom, (4.3) to work on the intl i9295?
Internally they are the same. The difference is the i537 is locked to att, and has a locked bootloader. Don't flash an i9295 rom
Sent from my SAMSUNG-SGH-I537 using Tapatalk
sam.crowther said:
does anyone know what the difference is internally between the 2?
What does it take to change an 1537 rom, (4.3) to work on the intl i9295?
Click to expand...
Click to collapse
It probably doesn't take much to get an i537 ROM to work on the i9295. The only difference between the two is that AT&T chose to lock the i537 bootloader making it impossible (currently) to install a custom recovery meaning you cannot flash custom kernels. This really limits what can be done to the i537. Currently there is only 1 custom ROM for the i537, and you could probably ask the developer to create a version that can be flashed to the i9295. One thing you'll want to make sure of is that you do not flash an i537 bootloader to the i9295, I don't know if it's possible or not, but nothing good can come of trying that. At the very least you would lock the i9295's bootloader, at the worst you could hard brick the phone.
If you're asking if the i537 stock firmware can be flashed to the i9295, I actually asked that same question and never got a helpful response so I don't know if it's possible or what the ramifications would be. At the very least I think it would be good to know if the i537 modems can be flashed and used on the i9295.
Hi Member,
I am on 4.1.2 version rooted with CWM installed. I want to upgrade to 4.3 stock. Is there any rom available without the knox bootloader and near stock with samsung touchwiz etc. I am searching from past one week but couldn't able to find anything on it.
gattu_koli said:
Hi Member,
I am on 4.1.2 version rooted with CWM installed. I want to upgrade to 4.3 stock. Is there any rom available without the knox bootloader and near stock with samsung touchwiz etc. I am searching from past one week but couldn't able to find anything on it.
Click to expand...
Click to collapse
Yes, there is a Stock 4.3 ROM from ShonkUK i think that basically just updates all the applications to the 4.3 versions, without KNOX. There are also a number of Modified 4.3 ROMS that all dont have KNOX so you could check them out if you fancy it.
Cheers
There's KNOX, and KNOX apps. KNOX is inside the bootloader (or similar), KNOX Apps are somewhere inside the android file system.
Once the 4.3 bootloader is flashed, you're done. Most roms DON'T FLASH a bootloader, but be sure to check Usually, those flashed from recovery are safe.... from Odin... who can tell?
Thanks for the reply. Can you please give me a link from where I can download the rom or any specific name as there are lots of cwm roms available and its very confusing to pick up.
gattu_koli said:
Thanks for the reply. Can you please give me a link from where I can download the rom or any specific name as there are lots of cwm roms available and its very confusing to pick up.
Click to expand...
Click to collapse
EVERY based on stock 4.3 rom here is on 4.1.2 bootloader.
However, before downloading any rom first take the time and read as much as possible, cause you seems to be novice and lazy
Try this, 4.1.2 bootloader and 4.3 rom
http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-galaxy-s3-lte-jb-4-3-mod-t2607321
HTC vivid
I have HTC ph30100 sense 3.6 Android version 4.0.3 I need custom rom. Help me please to find best custom rom
Try the HTC forums
Raistlin1158 said:
Try this, 4.1.2 bootloader and 4.3 rom
http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-galaxy-s3-lte-jb-4-3-mod-t2607321
Click to expand...
Click to collapse
Thanks Buddy. I will try this.
As the title States, I'm looking for a definite answer is SkyFall ROM will work on my AT&T s4 active i537 running 4.4.2?
Ive been searching a couple months how for any rom that will work on this damn phone and this seams like the only one.
SkyFall rom :
http://forum.xda-developers.com/showthread.php?t=2280556
Thanx in advance.
ZERT_TITAN said:
As the title States, I'm looking for a definite answer is SkyFall ROM will work on my AT&T s4 active i537 running 4.4.2?
Ive been searching a couple months how for any rom that will work on this damn phone and this seams like the only one.
SkyFall rom :
http://forum.xda-developers.com/showthread.php?t=2280556
Thanx in advance.
Click to expand...
Click to collapse
It should work. Any S4 ROM that is TouchWiz-based and the same android version as your stock ROM will work. So, for you as long as the ROM says it's based on TouchWiz and is 4.4.2, it will work.
Devo7v said:
It should work. Any S4 ROM that is TouchWiz-based and the same android version as your stock ROM will work. So, for you as long as the ROM says it's based on TouchWiz and is 4.4.2, it will work.
Click to expand...
Click to collapse
Awesome . Also, my phone says it has "NC9" bootloader. When I download the moduel, do I download "NC1"? Or am I completely screwed because (i'm assuming) I'm 8 versions away.
ZERT_TITAN said:
Awesome . Also, my phone says it has "NC9" bootloader. When I download the moduel, do I download "NC1"? Or am I completely screwed because (i'm assuming) I'm 8 versions away.
Click to expand...
Click to collapse
You need to download the modules for the S4 Active, they can be found in the General section. Modules are specific to the phone and kernel, not the ROM.
Hi.
I have a problem to identify my phone.
I was bought it few days ago, and I don't know what model it's it.
Screenshots below.
Under battery it's says that this is a SM-9005 model, but under back cover it's says that this is a SM-900A model. In download mode it's a SM-900A model.
It is a SM-N900A.. Not sure why it would say N9005 under the battery tho.. The NC2 Bootloader belongs to At&t.. You are aware that your phone has a custom Rom on it right? The Rom on your phone has is one from the International Note 3.. You can easily revert it back to stock AT&T firmware .. Seeing you have the NC2 Bootloader you can not put any Firmware below Kitkat 4.4.2 witch I believe is what is on your phone right now.. You can also upgrade to 4.4.4 Kitkat or Lollipop 5.0.. At&t Note 3 has a locked Bootloader so be careful not to flash any Rom that is not TouchWiz base or custom Kernels, Meaning true AOSP roms like CM, Slim, Paranoid Android, Pacman an so on will not work an will more than likely harm your phone.. Hope this helps..
neil2me said:
It is a SM-N900A.. Not sure why it would say N9005 under the battery tho.. The NC2 Bootloader belongs to At&t.. You are aware that your phone has a custom Rom on it right? The Rom on your phone has is one from the International Note 3.. You can easily revert it back to stock AT&T firmware .. Seeing you have the NC2 Bootloader you can not put any Firmware below Kitkat 4.4.2 witch I believe is what is on your phone right now.. You can also upgrade to 4.4.4 Kitkat or Lollipop 5.0.. At&t Note 3 has a locked Bootloader so be careful not to flash any Rom that is not TouchWiz base or custom Kernels, Meaning true AOSP roms like CM, Slim, Paranoid Android, Pacman an so on will not work an will more than likely harm your phone.. Hope this helps..
Click to expand...
Click to collapse
I want the international wersion. I don't like this 4g icon. Can I easy change it? Maybe it's a custom stock rom from N9005 without at&t apps and other bloatware? I really like stock touchwiz here but it's so many apps that I will don't use it never...what can I do now? Thanks for reply
Yes you can install another international as long as it is TouchWiz. So let's find out what kinda Rom you are looking for? Do you want to stay with Kitkat Roms or are you looking to upgrade to Lollipop? And another question, Are you familiar with Safestrap recovery? After you let me know I will get you links to a great Rom an easy to follow instructions for installation..
I'm having the same thing too. I got the device in the UK but it's an AT&T model.
I've got Safestrap on my device already and is looking to install Lollipop on it. How do you suggest I do that? I really like Knox security from Samsung but it is a pain to install ROM now. And I want to install a stock Lollipop on it if possible.
Thanks in advanced.
neil2me said:
It is a SM-N900A.. Not sure why it would say N9005 under the battery tho.. The NC2 Bootloader belongs to At&t.. You are aware that your phone has a custom Rom on it right? The Rom on your phone has is one from the International Note 3.. You can easily revert it back to stock AT&T firmware .. Seeing you have the NC2 Bootloader you can not put any Firmware below Kitkat 4.4.2 witch I believe is what is on your phone right now.. You can also upgrade to 4.4.4 Kitkat or Lollipop 5.0.. At&t Note 3 has a locked Bootloader so be careful not to flash any Rom that is not TouchWiz base or custom Kernels, Meaning true AOSP roms like CM, Slim, Paranoid Android, Pacman an so on will not work an will more than likely harm your phone.. Hope this helps..
Click to expand...
Click to collapse
You are a life saver. I also have the same issue as mlekopan16. I bought my device in UAE online. Reading your post I am assuming my device is also 900A. I am also attaching screenshots from my device. Request you to have a look. I was able to install safestrap on my device and it is working fine now. I want to use custom lollipop roms on my device but dont know what does a locked bootloader mean. My question is can I install custom lollipop rom and can I still use it with any other network or it can only be used with AT&T? Please advice.
note 3 upgrade n9005 which is actually n900A
Satan_Neil said:
Yes you can install another international as long as it is TouchWiz. So let's find out what kinda Rom you are looking for? Do you want to stay with Kitkat Roms or are you looking to upgrade to Lollipop? And another question, Are you familiar with Safestrap recovery? After you let me know I will get you links to a great Rom an easy to follow instructions for installation..
Click to expand...
Click to collapse
hello
i am having the same problem how do I upgrade my 4.2.2 kitkat phone which shows n9005 in android and n900a in download mode to 5.0 lollipop. i wish to do an update without locking the carrier
If the phone in download says it is an n900a, it is a AT&T Note 3 sm-n900a with a locked bootloader.
You will need to look here to upgrade to 5.0:https://forum.xda-developers.com/showthread.php?t=2703006