Related
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
If you are looking for a sleeker look check out www.proporta.com, they have a design in development , hence the special offer, but you will have to wait a while for the alu case about a month or so, but hey who's complaing when you get freeby!
roko said:
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
Click to expand...
Click to collapse
just got one! its really cool and sleek design... :lol:
I ordered the Proporta about 6 or 7 weeks ago. I received nothing since then (apart from the useless neoprene wallet). Looks like it's going to be a long time before it is finnished. I think the Inno looks far better too. I'm thinking about ordering one instead of the Proporta.
Damoncarl, could you please tell if the beltclip could be removed without to much damage?
Does the case have enough room for the extended battery?? 8) thinking of getting one if the proporta case doesn't have room, by the end of the design reveiws... and it looks like you have to keep removing from the case just to charge or use it.
It looks that neither have room for the XDA+battery.
Both the Inno and the Proporta have their pro's and con's. I think the Proporta is better for daily use, you don't need to remove the XDA from the case before usage. The Inno on the other hand gives far better protection since it completely encloses the XDA.
roko,
judging from the design I can't see how the xda can be used/charged from the case, asking cause that's the way I use mine, and everybody uses their case differently...the Inno case looks to provide better protection, (I have four cases I use depending on my daily use, guys tend to stick to one case, women tend to co-ordinate the cases with their outfits and bags!!) and your right in the respect that the Inno looks good, but as always, looks don't mean a thing if it aint practical (men inclusive in my opinion :twisted: ) and as you already have the case I'd rather pick your brains on it than have a sales person deliberatley trying to sell me something based on looks....
The Proporta has an opening at the bottom so I guess you can sync/charge and replace the smartcard without having to take it out of the case. Here's a better view...
http://www.proporta.com/Zoom.asp?id=XDAcase1.jpg
But still, it is in developement, images of the final product are not online yet (I asked for them but no response so far). The final product could differ. Wait and see
And so my choice is confirmed, da girl goes proporta! spoke to them today they say no to the batttery space but I guess I can't have all
Hopefully you won't get bored waiting for it (like me) :wink:
Did you by any change asked them when the case should be ready for shipping? I keep hearing "probably the next week" :?
roko
Yep, I did ask and was told not for ages as they just rejected the proto-type last week, apparently because you would have to remove the xda from the case for charging etc and that's not what was agreed to design wise....the guy I spoke to was so annoyed he told me not to bother ordering it yet!!! to wait a month but I will... just to have yet another case to co-ordinate.
(as women do :wink: )
Another month
I'll order the Inno so I'll have atleast one case (for the time being) :wink:
I've got one (the innopocket case) and I'm very Impressed with it. Although like anything its not perfect.
Here goes an honest review.
If you think the xda is already too big, dont buy this. If you want to protect your machine while carrying it - its like having an armoured tank protecting it! Imagine your dads old tobacco tin in brushed aluminium with a neoprene 1.5mm lining and there it is.
Its very well built - it does have a serious "no messing about belt clip" that you'd have to have serious impacts hit by a car for it to fall off. I'm a cyclist (during the week ; ) - so you'll have to excuse my practical thinking!
I think the only serious damage you could do would be to the antenna, which is the only potruding part, and even then, if it was on your belt that would never happen.
I did however make one major "mod" when I got it, I got out an electric drill and file and made a headphone socket hole straight away!
Being made of aluminium its very easy to do this, in theory you could do the same for the charger connector.
Street Cred
Although its very practical, to be frank I'm embarrased to carry it in "open view" on my belt, because it is ridiculously large. Under your jumper or jacket it acceptable. Or in your baggy Jeans pocket is another fine alternative.
In use
I even answered a few calls while listening to Mp3s in slough town centre last week, obviously the nice thing is that with the standard handsfree headset you can answer the call with the button on the mic pod, and not have to get the damn thing out of the case. Obviously in normal phone use its a pain to "unholster"
I think the main oversight is a lack of a charging hole, I think a pda on a desk with a charger lead hanging out of it is asking for trouble, one slip and your "preciousss" will go swinging to a clattering smash onto the floor, so I'd love to encase it with the innopocket during charging. (I'm getting the drill & file out now!)
Opening it Up
It did seem too much hassle to change tracks on media player by "getting it out of my pocket, opening it up, changing tracks, and closing it etc. So I just listened to my mp3s on "shuffle mode" it would be great if one was designed with buttons integrated into it, perhaps so it slots into the bottom edge connector in the same way as the clip on keyboard.
At times like that I was glad of the volume control on the headphone kit!
The opening up catch is nice and firm, so its very difficult for it to open accidentally, and as it opens "upwards" in theory as long as you are standing or sitting, it wouldnt fall out.
One of my friends did force it open because he didnt understand the way it opens, but in actual fact its made the case easier to use, because the stress exerted on the aluminium hinges if you do this enable you to open it further, to about a 80 degree angle from the closed position. This means that if opened on your belt the xda delivers at 45degrees or so.
Build Quality
I think in terms of build quality it is excellent, and certainly does protect the machine All edges were finished off smoothly, all neoprene stuck down well, definately a quality product.
Capacity
Havent tried it with the extended battery, as it hasnt arrived yet, I'll let you know if it fits, or if it can be modified.
Advantages
1) serious protection
2) serious beltclip that wont fall off in usage
3) Aluminium, lightweight, tough, and easy to mod!
4) Website order to Delivery time (under a week) and thats delivering it by airmail from suppliers in Hong Kong.
Disadvantages
1) Overall Size (too big and roomy - I'd prefer a snugger fit!)
2) Beltclip: My only criticism is that the belt clip cannot be removed, its riveted on, and being aluminium, if you removed it I guess you'd never get it back on. Otherwise its the best engineered beltclip I've ever used, I wish my old Cooltrax mp3 player's case had such a good one.
3) the only downside of course is removing it from the holder. to use it, its not exactly "quick release"
4) usual packaging problem though, when it arrived it looked like it had been opened a dozen times en route, cardboard box was creased and torn "open", but the product was intact and undamaged - I guess customs at several points opened it up to see what it was. You'd hope they'd stick tape back over it. I'd hate to send anything of a greater value that distance!
Opinions
Buy two. One for "on your belt" (modding it for headphone hole)
The other for in a bag or pocket, with the belt clip removed! and mod it for charging/mp3 playback.
The one thing I like about it is that it doesent spoil the look of the thing itself when you're actually using it. The standard O2 case sucks in that regard, and looks disgusting in my opinion. And lets face it the most dangerous aspect of using a phone/pda is putting it down. e.g. falling asleep with it on your lap or chest, or even charging it up.
When its in your hand you hang on to it for grim death. Putting it into the case is the riskiest part, especially cycling along, but hey, even doing that on a pavement is a big risk! And as I mentioned this was a doddle!
Walking along and holstering it is more of an embarrassment risk than a risk of dropping it because as I mentioned, it opens very sensibly.
Possible Improvements...
1) add a hole for charger
2) add a headphone hole
3) make the belt clip removable
4) make it less "thick" (width wise)
5) slots for memory cards inside the case, although there's plenty of room to just have them "floating around" - that said, would you risk an £80 memory card dropping out while you're walking.
6) add a button for skip track for when in mp3 usage
Conclusions
Protection 98%
Practicality 40%
Style 30%
It does "what it says on the tin" :lol:
"protect your investment"
Can you please provide a cost for the aloy case for the xda & approximate delivery cost to Australia
Thanks Peter
Follow the previous mentioned link http://www.innopocket.com/EShop/Main/product.php?ID=63 and you will see the price.
I fully agree with Derek's review but like to add a couple of disadvantages:
1) The spring mechanism started to wear out in the case I had. I had to bend them back into shape.
2) Although perfectly padded on the inside there is the possibility of having the metal on the inside come into contact with your screen. Maybe it is just me being clumsy but I was nervous every time the XDA went into or out of the case.
I stopped using it and it is lying around somewhere here.
Robert[/list]
Mine's now laying around as well... climber!
Unfortunetely it wont accommodate the extended battery
Update on the Proporta hardcase:
It seems that the first 1000 will be shippped early July. Hopefully I will be one of the lucky bastards because I'm waiting for it since last January.
http://www.proporta.com/Zoom.asp?id=Alu_XDA.jpg
Hmm... Re the Proporta case, it looks like someone else had my idea about holes for connectors!
It looks a bit slimmer than the innopocket. I'm hoping it has a cutout in the back to allow for the extended battery to poke out as well...
Somehow I dont think they will think of that one, otherwise it looks a much better design. Do let us know with a full on review when you get it Roko....
Hi I got the ali case, the thing is almost twice the width, but I really needed to stop the XDA from crashing out of my pocket, so I tried it for a few days, its like an ejector seat, My xda has hit the ground 6 times in one day, I lost my pen & a big card I had in it. Sorry it has gone in the draw.
Hi, i got my proporta ali case this morning - seems quite nice Very light and doesn't bulk up the device too much! Very strong too, no way i'll loose the screen with this baby on. All connectors/buttons can be got to with the case closed.
Will test it over the next few days!
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
Nutshell: http://tuff-as-nuts.com/index.asp?PageAction=COMPANY
I had contacted Nutshell regarding a customized Horizontal Case (black) that will fully enclosed the HTC Advantage X7510 with the leather pouch included about 2 months ago. I was able to get intouch with Ian Miller and was basically received with open arms. I was asked to submit my design and the dimensions.
The dimensions are: 5.8 inches (lenght) x 4.4 inches (height) x 1.30 inches (depth).
It is closed by a velcro flap that fully covers the top of the case preventing any accidental exposure to the elements.
The back of the case has the D ring and metal belt clip lined with leather. But in all honesty, I think it would have looked better if the metal clip was left without the leather strip cover. It would looked nicer if the silver finish of the metal clip was shown rather than hidden.
But all in all, the case is very well made. The stitches and cuttings were done right and very clean. The case will protect the X7510 and it's leather pouch while having the ability to clip it to your belt or trousers on the go.
I paid $95.00 for the case, but it may become cheaper if it will be popular.
I have attached pictures for you guys and gals to check. I believe NUTSHELL will mass produce them if the demand is high enough.
THANK YOU NUTSHELL (Ian) for a case well done.
Feel free to ask questions...
Added Pictures...
Added pictures...
nice find as i just bought myself another case but this one i like a lot better although the case i bought was only $49
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
nutshell said:
With your blessing I"ll use some of the images you have posted here.
Click to expand...
Click to collapse
Yes of course. Feel free to use it.
cktlcmd said:
Yes of course. Feel free to use it.
Click to expand...
Click to collapse
Nutshell,
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
eaglesteve said:
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
Click to expand...
Click to collapse
In my case, since it also houses the X7510 with keyboard and the leather case, it is not slippery at all. It is easy to grab it on top and just pull it out. The case itself is not made of really hard leather plus it is lined inside with felt like skin to protect the device from being scratched by the case itself. The technique I use to get it out fast is to pull on top and press each sides of the case because that is where I notice the greatest hold on the device occurs.
In your case, since you will probably want Nutshell to adjust the measurements to accommodate just the device, it won't even be a problem because of the soft felt lining, it will just slid easily in and out.
It trully is a nice case. I wish they had designed it like this from the start.
nutshell said:
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
Click to expand...
Click to collapse
I am very interested!
Another case?
eaglesteve said:
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Click to expand...
Click to collapse
I have listed the product for the x7510 in our catalog:
Horizontal belt case for HTC x7510
Sure, we can make you a slimmer horizontal case.
Costs would be the same.
We would need the dimensions without the keyboard.
Shipping to Oz from NZ depends on how quickly you would want one.
Contact me through the website.
tuff-as-nuts.com
Will the 7510 case also fit the 7500/7501? My understanding is that they are the same dimensions... Anyone know offhand?
Thanks for the topic
Have anyone ever seen a vertical case for X7500 for the use without the external keyboard?
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
trondkk said:
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
Click to expand...
Click to collapse
No. The keyboard is the most effective way to ruin your device with scratches. Take it away if you want your unit to look new all the time. If you really must have the keybaord, put a piece of cloth between the unit and the keyboard to prevent them from rubbing against each other.
We have different experiences then eaglesteve. I have used my HTC X7500 for well more than a year with the original book cover (with the 3 clips) and have only miniscule scratches on the keyboard itself, not on the main unit.
I now also have the Piel Frama Case (since a month ago) and with this case it would be even more difficult to scratch the unit with the keyboard.
And even if this was NOT the case I would much rather have endured a scratch or two than having my screen broken due to a fall or pointed item pressing against it (even in the pouch). The solid steel of the keyboard over the screen gives me an ease of mind I will not trade for the sake of a marginally smaller "package" to carry around.
And now, with the vertical Nutshell-Pouch I hope to enjoy my Advantage X7500 for a long time since no better device (for my needs) seems forthcoming from HTC or any other manufacturer.
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
techntrek said:
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
Click to expand...
Click to collapse
Here you can find a scratch proof leather case. Also cheap and black (more elegant) colour.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=370063633176&ssPageName=STRK:MEWN:IT&ih=024
finally after many, many tries, a case that really works. well made. beautiful. sturdy. i got the mag lock. very nice, highly recommended.
Well... I just order mine from Spain... 10/14 days to wait... will see. I'm risk 99.95 USD on it.
I just receive the confirmation email... good signal, my VISA still works.
Received last week.
Well finished... and the quality is according the price.
The X7500 fits perfectly even with it's case. Since I'm not placing the X7500 in the case with the original one there is place for my backup battery.
Great job Nutshell
This case is nice! But I always wanted a case that would allow me to hold my X7500 without the keyboard,so it would look like a slim and supersized-screen IPOD! That I can put into my pocket easily..like an IPOD.
So, I have a question for Nutshell: can you build us one? But I can someone here volunteer to provide some dimentions for an X7500 or X7501, coz I really sucked at the whole designing and measurement thing, afraid I would screw up the whole thing.
Hey everybody!
I go by Tactus Texas over at notioninkhacks.com and I am an electronics manufacturer and an Adam enthusiast. I have the capability to produce cases with my manufacturing partners but I want to get the communities input first before I take anything to production.
What do you want in a case for your Adam? My current idea is that of a "second skin" a thin and light hard case that will be always on your adam and will cover everything while leaving access to ports, the camera, and the display/buttons. I want to be clear your input is going towards a real product that I hope to bring to market within the next few weeks provided we manage to get Notions blessing to go ahead.
Chime in and have your say as to what it should be, if anything, this project will only happen with community support!
- TactusTexas
If you interested in being put on this list to be notified when pre orders start go to the notion ink hacks website and look under the accessory section and submit your information!
I'm expecting my NI very soon and as a casing I think I would opt for something of a hard leather casing I could fold open as a book, interface ports available of course and easy to slide out to show of in full and home usage.
two types of cases i really enjoy are:
1. leather case that can be used as a stand too like this:
http://www.amazon.com/Cyber-Acoustics-IC-1000BK-Leather-Cover/dp/B0042BVSF4/ref=sr_1_7?ie=UTF8&qid=1295661437&sr=8-7
if you could make a magnetic strip that run from top to bottom or left to right to latch it close that would be fantastic
2. Or a soft gel like this one
http://www.amazon.com/Amzer-Argyle-Gloss-Samsung-Google/dp/B004FPZBSC/ref=sr_1_35?ie=UTF8&qid=1295661879&sr=8-35
hate the hard shell pastic cases.
whatever the skin, it should be thin and easy to grip
I like the leather case idea with folding cover like a book. I also like the hard case idea. I currently have a seidio rugged case on my incredible, I like the protection a hard case provides. Maybe a hard case with a leather folding cover. Put me on the pre-order list please.
edit: meant to write "pre-order list" not "protest list", damn auto-correct
Sent from my ADR6300 using XDA App
Edit: Nevermind.
Good stuff.
Notion ink case idea
ksidirt said:
Edit: Nevermind.
Good stuff.
Click to expand...
Click to collapse
I want a leather case that will hold a keyboard or a pocket for a small foldable bluetooth keybard.
Hey guys, sorry for my absence here I've been around on NIH and Notion Addicts working with the community on the case! We are now preparing our first prototypes, we weren't able to go with leather (right away) but we are working on solutions for that as well! You can expect to see some shots of it by the end of the week I think you guys will definitely like it!
We will also be producing color strips here very shortly!
Love the idea and agree with what you want. I would add some protection for the camera though. Maybe a Velcro strap or strip that can be removed or folded back.
Sent from my PC36100 using XDA App
Hey guys,
Tactus Texas here with more good news today on the Project Stealth front! So many people have been asking when is it coming, what does it look like etc and while I can't answer all your questions I can at the very least tell you guys that we are working at full steam to get this done for everyone. Starting a new project of this scale is hard work but those of us here at NIH and our manufacturing partners are working very quickly to get things ready. We took a slight change in our internal goals for the product, we want it to be as sleek and stylish as possible but our secondary goal is to make it as rugged as possible.
With this in mind you will see a final design that cradles your adam in a soft silicon but surounds it in a very hard plastic so you get shock absorption and a sturdy exterior to defend against the bumps and bruises of every day life. You will also have the option of using a removable screen cover that you can clip to the front of the device with ease as you throw it into a bag without worrying that your screen won't come out the other side. You can also expect a great integrated kickstand as well!
In short we are doing everything we can to get this product to our fellow adamites as we've been called as soon as possible. You can expect to see official renders here at NIH and you can rest assured you will be able to see review units in the hands of your favorite Notion fan sites before you have to bite the bullet and pull the trigger on an order.
Stay tuned, more info will begin to come in at a faster rate, also stay tuned for Project Stealth to evolve into a line of Notion Ink products to cover all of your needs to make this great device even better.
Thanks everyone, keep spreading the word, it is the community that will decide if we go to full production!
- Tactus Texas
On a secondary note how would you guys feel about an extended battery as well? And also any particular favorites for color strips?
Red
Sent from my ADR6300 using XDA App
Tactustexas said:
On a secondary note how would you guys feel about an extended battery as well? And also any particular favorites for color strips?
Click to expand...
Click to collapse
If the thing really lasts 10+ hours, I don't see my self wanting to carry around the extra weight of an extended battery (at least not directly in a case).
joshua.lyon said:
If the thing really lasts 10+ hours, I don't see my self wanting to carry around the extra weight of an extended battery (at least not directly in a case).
Click to expand...
Click to collapse
Thats one of the things we have tried to take into consideration, we do think that there are power users who are planning to use this device in an outdoor environment for long periods of time without access to a charge, that's what we are going for on creating an extended battery solution. We do know that option won't appeal to many users so we are keeping that as an R&D for now. For now what we are working on wont actually be integrated into a case, it would ship as an extension for the existing battery compartment but in a way that wouldn't disrupt the unique grip of the adam.
I appreciate all the feedback here and around the web so keep it coming, we really are listening!
I would like a leather case. with a folding design that acts as a stand. and an integrated bluetooth keyboard. Ive seen this design before for an ipad in Brookstones gadget store in my local mall.
Hey number01pup, we won't be launching with leather or keyboard at launch but rest assured we are working on it! I hope to be able to announce something on that front in the coming month. If not leather a keyboard equipped case is definitely in the works.
charger/extra battery for adam
I would be interested in this kind of charger/extra battery, which would store electricity into normal AA cells. Solar panel would be nice too since I like to take my laptop with me when I go cycling for longer trips.
Unfortunately I can't post a link here because I'm a new user but if you add the www and the dots this is what the url looks like:
mark-ju net/bike_ride/equipment/charger htm
Does anyone know if such products are commercially available?
It would be ideal for my adam.
Battery life
people over at notionaddicts are not reporting anything near 10 hours of battery life. So extended or better quality batteries might be in demand.
Hate the hard shell cases. Something with leather would be good.
Some color or texture that you can use in the sun.
I know that right now most of you do not have this problem, but this summer you will. Flat black, or shiny, in the sun gets hotter than he__! Just today in Florida after an hour I could barely hold my Lenovo/Pixel Qi netbook and could not even think about using the touch pad.
Hey everyone,
I just wanted to post some pics of a stand that I put together. At first I bought one from BoxWave that they had up labeled as a Bamboo NOOKcolor stand.
http://www.boxwave.com/nookcolor-cradles-and-mounts/bamboo-nookcolor-stand/bwpdd/tpt-zfkf
Since I purchased it, they have changed the image on there website, though. Originally it was pretty misleading on the dimensions of the stand. I paid $30 for this thing and really it's only meant for a cellphone. It's absolutely way too small to hold up the NOOKcolor without tipping over.
Anyway, I liked the design of it so I went out and bought a bamboo cutting board from Walmart for $20 and cut it up into a bunch of pieces. I made myself a cardboard template based on that smaller stand I originally bought. I stacked all the pieces and then glued them together. I don't have a band saw so I found this really nice guy who has a shop over at Etsy who agreed to cut it out for me. He really did an awesome job. The link to his shop is here
http://www.etsy.com/people/irishmanswoodworks
in case anyone wants him to make one for you.
After I got it back from being cut out I sanded it up a bit more, put several coats of Tung oil and glued on a piece of felt. I think it came out really nice in the end. I attached some pics, so let me know what you guys think
That looks Amazingly Simple to do.
That is really quite snazzy!
I love it! Great work!
The only wood I'm good at working is ......
LOL tooo easy.
It does look beautiful. Does he use other exotic woods and stains?
I supplied the glued up bamboo board for him to cut, but I'm sure he can make it out of whatever you would want.
What a sweet stand. It looks really nice.
This is exactly what I'm looking for! I use XBMC in my living room and my Nook color is my remote. Thing is it runs out of juice all the time since I keep it on 24/7 and its a pain to charge. I'd like to see you drill a small square hold in the center of the bamboo where it can "dock" and run it out the back USB. Then we can run the usb to the AC outlet/USB Charger and have a Charging Dock!
Thats pretty awsome
Great work!
Today we’re looking at the two custom cases for the Galaxy Note 2.
Click here for the full review with clickable links and where to buy
First, a very basic thin plastic case from Casetagram. Casetagram, as you've no doubt figured out by now, involves your social media in the design process. Another case from Case-Custom is thicker hard glossy plastic and it has almost squared off sides that turn the Note 2 into an almost iPhone shaped smartphone. They'll both take about 1 month from the time you order them unless you select expedited shipping which will cut that time in half. While they are the same thing in theory, these two products are different on just about every level, read on.
Click here to see a video slideshow of the two cases
Casetagram case $39.99
Pros: Great if you're social, very thin case, decent printing, layouts and effects are unique to customizing sites, case design app available for iOS
Cons: a bit expensive for what you get, no Android design app
A very thin, lightweight case that is made of a clear white or clear dark plastic. It's thin enough that it should still fit in some custom molded note 2 docks. Either color you decide to design on, you'll be able to see through to the back of your phone if you pick a design that leaves empty negative space. I personally can see the “Galaxy Note 2” logo and ugly “Verizon” logo and huge “4g” graphic through the cracks in my photo collage. If you read this site frequently, you know how I feel about Verizon, the fact that I can't cover up their graffiti makes me angry. I don't see the benefit of the negative space being clear when you're designing a cover to “cover” your phone. To be fair, the design tool on the website does clearly show you that the negative space will be see through. It shows the international back plate on the phone though without all of the Verizon clutter on it so you don't notice it while designing.
The only way to avoid negative space showing is to select the “single” layout which is one full sized picture across the back of the device. The problem with that is it doesn't really accommodate full pictures. Any Instagram picture that you insert is automatically 72% below the recommended resolution (the site never says what the recommended resolution is?) This becomes a guessing game that isn't very easy, It took me a half hour of resizing, uploading, and selecting pictures until I had a picture that supposedly fit in full sized design mode. Even then, when I was said to be within the recommended resolution, I still received a low resolution warning on the screen even though the picture looked fine. It isn't made clear anywhere on the site but in order to edit or move your image once it's placed, you have to double click on the working image of your designed phone. You are then given a crude set of tools to re-size and move your image. In trying to re-size the picture, the cursor would go out of the borders of the web page numerous times and it became quite frustrating to finish.
Things become almost humorous when you realize that Casetagram, which is a name derived from Instagram, offers it's own filters which they call “effects.” What this ends up meaning is that you can take a filtered instagram picture and re-filter over your initial filter. If you've always wanted to double sepia all of your photos and you didn't know how, problem solved.
They offer cases for Apple smartphones and tablets, the Galaxy smartphone line, and the nexus 4 currently.
Case-Custom case $32.99
Pros: thicker printing, thicker case for better protection, unique squared off sides, relatively cheap
Cons: difficult to communicate with customer service if you have to, buttons can be hard to press in recessed cutouts
This is a thicker case, but in a substantial kind of way. It feels stronger and fits in the hand better in my opinion. It's unique straight sides give it a modern look but also make it easier to grab. Samsung and others design phones to better slip out of your hand. They want your phone broken so you're lining up to get a new one as soon as possible. Why do we put up with this? My old Motorola Droid X was perfect, a rubberized metal exterior that felt solid and stayed in your hand. This case is very glossy, but the design of the sides makes it feel secure in my hand. For those of you that love the clean simple design of the iPhone but hate Apple's controlling grip on software, this gets you a little closer to the look you love.
Case-custom has a much fuller selection next to casetagram. They offer options for most any current smartphone and many tablets besides just the iPad. They also offer custom designed leather case options and for the Galaxy Smartphones that means flip cases. Custom printed leather flip cases are something I've never seen available, I'm in the process of trying to get one for review so hopefully I can answer some questions. I don't know how sturdy the actual cover is, whether they've added an NFC chip to the cover or what the inside that touches the screen is lined with. I'll have answers to those questions and more possibly soon. It's only $6 more for the flip cover over the snap on so it should be worth it if they offer the same quality that I see in the case I'm currently holding.
Case-Custom's design tool online is a bit odd. Everything is there, including facebook and instagram integration as well, but it's just a bit clunky. It's less flashy that Casetagram's tool, but in the end it's simple in a great way. Where Casetagram's design tool makes you guess, Case-Custom's is straight forward. Unfortunately, you can't see any other angles of the case besides a head on view while designing, it doesn't show off the unique straight sides anywhere? The case also looks as if it is soft plastic in the first picture you see on the site, but it is in fact, hard plastic. You aren't given a choice to pick the color of the plastic that is used for your overall base case. I designed a full sized picture to take up the whole back and the sides and inside are a bright clean white gloss plastic by default. It looks great in the end but It was a shot in the dark. Everything seems a bit confused with Case-custom, down to their customer service. It was odd talking back and forth and I assume it is all thanks to an English-Chinese language gap. All of my email exchange with the company was signed by a person named Zoe Saldana. It's a completely unique name and the equivalent would be if I told you that this article was written by me, Arnold Schwarzenegger, thank you for reading.
The process of ordering a case through Case-Custom reminds me of the words of the late great Hunter S. Thompson:
“Buy the ticket, take the ride...and if it occasionally gets a little heavier than what you had in mind, well...maybe chalk it off to forced conscious expansion”
It might not feel like the case will arrive, but if and when it does, it might be one of the better cases that you've ever seen. I wish I could be more certain for you here but all I can tell you is that the Case-custom case costs less, it was easier to design, and I'm much happier with the final product next to the Casetagram case. Buy the ticket, take the ride...
Final thought: A big part of which of these makers gets your business will come down to personal preference. The printing is good enough on both, they are both tough enough cases, and they both have cutouts that line up well to accommodate the Note 2. If you want thin and light and putting filters on top of filters on top of filters interests you, then Casetagram is for you. If you don't mind a thicker plastic case and you like the modern straight edges a la the iPhone, you'll be happy with the Case-custom case.
If you haven’t already, click here to see a video slideshow of the two cases.
ENJOY YOUR GADGETS!
@examinerPhil
Ok. You've got me.
I'm not even interested in this type of case. I use the zero lemon battery and the tpu that came with it.
However, after all the debates about the music in your slide shows I just had to click to see what you chose for this one.
lol ok I was a little curious about how the cases look too...
Nice review and nice pics.
Sent From My Ginormous Note 2
planetbeen said:
Ok. You've got me.
I'm not even interested in this type of case. I use the zero lemon battery and the tpu that came with it.
However, after all the debates about the music in your slide shows I just had to click to see what you chose for this one.
lol ok I was a little curious about how the cases look too...
Nice review and nice pics.
Sent From My Ginormous Note 2
Click to expand...
Click to collapse
That's all I can ask for! Thanks for reading.
Good news to report,
The company mentioned here, Case-Custom, offers a customizable flip case for our note 2! If you read through the review above you'll see that I was really impressed with their design and build quality.
I've designed a custom flip cover on their site and it is shipping out today. I'll report as soon as I receive it (quoted 10 - 20 days) on the quality.
Here is a link if you want to see for yourself:
http://www.case-custom.com/custom-galaxy-note-2-flip-cover.html