Hello, I've tried to flash my Lenovo K3 note with SP Flash Tool, firmware from needrom.
It was not working and I've accidentally clicked on format whole flash and now my phone is rebooting in loop and getting only TOOL DL image fail.
Please advice some hard bricked recovery for this situation. Thanks.
Hi, thank you for using XDA Assist. There is not much information about your device on XDA. But I did find this which has a guide on how to return your device to stock, http://forum.xda-developers.com/android/development/ufficial-thread-lenovo-k3-note-t3102997 See if it helps and you ask further questions in that thread.
Solved
Thanks for answer. I was able to solve it by following steps from:
http://forum.xda-developers.com/android/help/how-to-root-lenovo-k3-note-t3098349/page3
Glad you got it fixed I'll close this thread now.
Related
Problem Occurred: Because of uninstalling or tweaking certain settings and apps, the second reboot will never success (soft brick bootloop)
What is needed for recovery : A stock firmware for EKGC100 (Malaysia), GC100XXBMC4 (XME)
Why don't you download by yourself? Because I've searched everywhere but only one place had the file, that's Rapidator. I've excess the limit of downloading the file from rapidgator. Download fail.
Why Post this?
PLEASE, I please everyone, please share the firmware for me. I need this stock firmware for unbricking my camera... :crying::crying::crying:
It's in the general help
Check adam outler threads... I always saved by his files everytime bricked
Stock firmwares are HERE
Dear all
i bought a new lenovo k3 note k50-t5
after a wrong manipulation i have the phone frezze on the boot
i tried to wipe and factory reset but the same issue
Please your helps
Best regards
SPF Tools
hannibaltn said:
Dear all
i bought a new lenovo k3 note k50-t5
after a wrong manipulation i have the phone frezze on the boot
i tried to wipe and factory reset but the same issue
Please your helps
Best regards
Click to expand...
Click to collapse
Regards,
These phones are lovely and not easy to hard brick. You can find all of the information you need to fix your phone in the following thread:
http://forum.xda-developers.com/android/development/ufficial-thread-lenovo-k3-note-t3102997
If you need further help search the forums you will find what you need. I have the same phone and found everything here so far. Good Luck.:good:
Hi you all guys, I own a Kazam Tornado 348 and with little android knowledge decided to root it, which I managed.
After that I decided to keep playing and I did something wrong since I got the boot screen loop, the one where you are only able to enter the TWRP recovery mode but not the OS, I tried to restore it, wipe and reboot it multiple times without success. Now it seems I did even something worse because I am not able to enter recovery mode anymore and it seems will keep turning off and on (just enough to show the phone logo) until it runs out of battery
It is possible I deleted something else last time I was there, like deleting the TWRP itself? I am on total darkness here, I will appreciate if someone point me towards a possible solution, which I hope there is. Thanks for the help
Simply flash it with sp flash tool with gionee elife s5.1 firmware which is Android 5.1 or with kazam official firmware 4.4.2... It will boot up..
My answer is not for u becaus its too late but for those who came here to the thread having same problem...
help for my tornado 348
afaqktk2 said:
Simply flash it with sp flash tool with gionee elife s5.1 firmware which is Android 5.1 or with kazam official firmware 4.4.2... It will boot up..
My answer is not for u becaus its too late but for those who came here to the thread having same problem...
Click to expand...
Click to collapse
Hi, I have a similar problem but I am not an expert... so I need very easy and step by step instructions...
Could you please snd detailed information about the procedure to flash my Tornado 348 (including links or pgms to execute) ?.
Please note that the major problem is when i connect it to internet: in this case I cannot use the smartphone because it starts to open and close apps and downloads an infinite number of apps...until the memory is full and it stops.
So the best solution should be to keep it disconnected from internet (no wifi) and access it from a PC.
For this reason I kindly ask you if you could help me with sending the right sw tool to flash it from my PC connected to my Kazam.
Just in case I leave you my mail : [email protected].
Really hope you can help me. I paid my Tornado 348 € 300,00 and I have NO ASSISTANCE by Kazam... (they say they supended the assistance in Italy and I am waiting since months without any help)
Thanks a lot
Antonio
renox51 said:
Hi, I have a similar problem but I am not an expert... so I need very easy and step by step instructions...
Could you please snd detailed information about the procedure to flash my Tornado 348 (including links or pgms to execute) ?.
Please note that the major problem is when i connect it to internet: in this case I cannot use the smartphone because it starts to open and close apps and downloads an infinite number of apps...until the memory is full and it stops.
So the best solution should be to keep it disconnected from internet (no wifi) and access it from a PC.
For this reason I kindly ask you if you could help me with sending the right sw tool to flash it from my PC connected to my Kazam.
Just in case I leave you my mail : [email protected].
Really hope you can help me. I paid my Tornado 348 € 300,00 and I have NO ASSISTANCE by Kazam... (they say they supended the assistance in Italy and I am waiting since months without any help)
Thanks a lot
Antonio
Click to expand...
Click to collapse
Download official firmware of tornado 348 and see tutorial how to flash mediatek phones with sp flash tool.. Hope u'll get it
Same
This happened to me too, and not only I couldn't flash a newer Android version (5.1), my IMEI number got destroyed, and I have tried many things to fix it and restore it, but that didn't work.
Hello everyone,
Device: Leeco LE2 Snap Dragon Version
Today I did a big mistake.
I installed original stock ROM EUI Version: 5.9.026S
But that ROM is not functional. At the time of first set up, I am unable to go forward after accepting Leeco terms & condition because Leeco server is not working. Strange thing is that there is no option to Skip setup.
But TWRP recovery is replaced with stock recovery. I can't do anything from stock recovery.
I tried to unlock the bootloader. But it didn't work because OEM UNLOCK is not enabled from settings.
Tried to fix hard brick using Flash tool, it's not working either because the phone is not hard bricked.
Now I am stuck, don't know how to solve.
Please help!!
Thanks in advance.
Try this
https://forum.xda-developers.com/le-2/how-to/guide-unbrick-unlock-leeco-le-2-x52x-t3831116
tanaymondal said:
Hello everyone,
Device: Leeco LE2 Snap Dragon Version
Today I did a big mistake.
I installed original stock ROM EUI Version: 5.9.026S
But that ROM is not functional. At the time of first set up, I am unable to go forward after accepting Leeco terms & condition because Leeco server is not working. Strange thing is that there is no option to Skip setup.
But TWRP recovery is replaced with stock recovery. I can't do anything from stock recovery.
I tried to unlock the bootloader. But it didn't work because OEM UNLOCK is not enabled from settings.
Tried to fix hard brick using Flash tool, it's not working either because the phone is not hard bricked.
Now I am stuck, don't know how to solve.
Please help!!
Thanks in advance.
Click to expand...
Click to collapse
dgarcia said:
Try this
https://forum.xda-developers.com/le-2/how-to/guide-unbrick-unlock-leeco-le-2-x52x-t3831116
Click to expand...
Click to collapse
Thanks a lot. You saved me.
Hi. guys! I'm sorry for bothering you, but i'm desperate. I tried to root my RMX3085 (R UI 3.0) with this guide, but messed up with patching the boot file and ended up trying to downgrade my system, in order to root it.
The problem is that, i used sp flash tool "format + upgrade" option...... and now my phone is not booting anymore, no logo, no recovery, not booting. What's my variants and do i have a chance to make it work?
Thanks for the help!
congratulations to your first brick. learn how to ask a question. maybe someone will read this with a valuable heading. "please help" questions usually won't receive useful answer.
Are you able to enter into brom mode at present? If yes, then you might can fix your device
And don't follow that method..there is another one available..flash Thailand rom first then unlock bootloader and again flash your regional rom..your bootloader will stay unlocked..and for rooting do not follow tony's method..head to mtk client github page..there you will find the safest method works perfectly