Database Develop

Your device is corrupt.... Bootloop LG k8 . Recovery doesn't work

Hi guys, i was rooting my phone LG k8 using adp method get form here : https://forum.xda-developers.com/lg-k10/how-to/friendly-root-method-lg-k8-k10-t3531223
but in the last step in the rooting part i noticed that the SuperSU archive didn't appear in the TWRP manager so i got no more choise than reboot. Now the problem is that after the LG logo appears the message saying "Your device is corrupt...", then restarts - logo - your device is corrupt - restarts - logo - your device .... well, a bootloop, is so anoying. I tryed to use recovery funcion of LG, but when it ends, phone reboot and the problem is still there: bootloop. I can't boot in fastboot mode or anything elese form the PC so i don't know what to do. How can i fix this problem? hope my phone doesn't become a brick.....

1. Download LG K8 firmware (k350n) here or here.
2. Download LG UP software and the dll for LG K8.
3. Boot your phone into Download Mode (hold Volume-Up key & connect the phone to your computer via USB).
4. Upload firmware to your phone (update mode).
Your phone should be reset and working, but not rooted...
I hope this helped

If you cant boot into download mode, connect the phone without the battery to computer. It will find 3 devices. then put the battey back and press volume up. You'll get to download mode. Download and install lg bridge. s. Restart pc. If your device is in download mode lg bridge will see it. Go to update tab, try it. If your device is up to date an option will come up after trying to update to the right of the update tab saying error during update. Press on it and then wait. It will download install and reboot.

Experiencing similar problem on my LG K8 (K350Z).
I've successfully rooted device using guide: https://forum.xda-developers.com/lg-k10/how-to/friendly-root-method-lg-k8-k10-t3531223
Later I decided to recover to stock KDZ, but did very stupid thing first - I've entered recovery mode (by pressing down+power, then down+power+up) and selected "Yes". After that green droid shown, and phone restarted, showing logo, then "Device is corrupt" message then off.
Starting it goes through logo"Device is corrupt" loop.
I've tried many suggestions to use LGUP and LG Bridge, but PC simply doesn't see the phone correctly.
Driver re-install didn't help much, it's still shown in Device Manager as "LTE Android MTP Device" with yellow exclaim triangle, but LGUP and LG Bridge can't connect to it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I select in LGUP it says "LGUP can't load the model[C:\Program Files (x86)\LG Electronics\LGUP\model\com"

Finally! Resolved the problem. Looks like I've installed different driver versions and LGUP and LG Bridge in wrong order.
Re-installing everything helped and LG Bridge was able to flash the updated software version (V10f-AME-XX) and now my K8 works fine
Going to try post 2017 rooting methods soon.

yukosteel said:
Finally! Resolved the problem. Looks like I've installed different driver versions and LGUP and LG Bridge in wrong order.
Re-installing everything helped and LG Bridge was able to flash the updated software version (V10f-AME-XX) and now my K8 works fine
Going to try post 2017 rooting methods soon.
Click to expand...
Click to collapse
Hi, i have same phone and same problem. And i dont know which driver should i install because its keeps rebooting my phone. Can you help me plss

OSAL said:
Hi, i have same phone and same problem. And i dont know which driver should i install because its keeps rebooting my phone. Can you help me plss
Click to expand...
Click to collapse
hi, i got bootloop and phone just rebooting every time, no matter i hold pwr_up or not, it is not entering download mode anywaw, can you help me??? pls

farxad007 said:
hi, i got bootloop and phone just rebooting every time, no matter i hold pwr_up or not, it is not entering download
Click to expand...
Click to collapse
i can't go to download mode bc the phone say that is corrupted

Have you tried doing a long reset for your phone type by holding the correct buttons before the phone starts. Let it die first then charge it and try a long reset

Question How to setup spflash for the soft bricked phone

Hi, my wife gifted me that Chopin phone form China, after a wrong "flash and lock" global firmware now my phone is stuck on bootloader.
According to this thread:
Redmi Note 10 Pro 5G brick
Redmi Note 10 Pro 5G Chinese version with fastboot unlocked. After unsuccessful firmware. At startup, it goes into fastboot, you can load it into recovery. Wipe doesn't help. When trying to flash through fastboot MiFlashPro "FAILED (remote: 'not...
forum.xda-developers.com
I have all the files needed to setup sp flash and try to put again the Rom in the phone, which is now not unlocked and no usb debugging on.
Can someone please give me a tutorial on how to use those files? My phone still not recognised in sp flash com port, I don't know how to do.
If anyone will help me it will be so appreciated, thanks!

If you need to disable authorisation, did you run the MTK Auth Bypass tool and get the message "Protection disabled"? That's what I had to do before SP Flash Tool would flash the phone (without disconnecting it or rebooting), and I also had to set the baud rate to 921600, although that was all under Linux, and the phone was still unlocked.

it's complicated. with phone locked fastboot commands don't work. with my hold mi a3 fastboot flashing unlock command work. but with miui and mtk chipset probably it's useless. but u can try. if u boot into bootloader with mediatek driver the pc should recognize your phone also if it's blocked

1: Unzip this attached file into a folder. run it.
2: select the unlock bootloader and start, then connect you phone via usb with all three buttons pressed. (Phone must be off before connect, )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3: Your bootloader will be unlocked.
4: Close the program and re-start again, this time, select auth bypass and start, then repeat the phone connection. after at the bottom line, it show bypass ok.
from here you may flash again rom via Miflash or SPflash.
P.S: I think the file size is too big, I can not attach it here. Sorry! P.M me if you wish.

Thanks for the help, the problem I'm facing it's Auth tool cont recognise the phone, when I open the shell keep saying waiting for the device.
Driver are mtk with Libus installed, dunno.
When I restart the phone immediately have the logo then, if volume up I can log mi assistant or with volume down the bootloader screen.

Bonscia said:
Thanks for the help, the problem I'm facing it's Auth tool cont recognise the phone, when I open the shell keep saying waiting for the device.
Driver are mtk with Libus installed, dunno.
When I restart the phone immediately have the logo then, if volume up I can log mi assistant or with volume down the bootloader screen.
Click to expand...
Click to collapse
1. Check your device driver for USB, suggest you re-install the MTK usb driver.
2. First run the program, select the Auth by pass then press start.
3. Make sure phone is in "power off" state, press Vol+, Vol- and power (all three at the same time), and don't release it, plug in USB cable and wait.... Don't release these three buttons until it is Auth by pass OK.
During this process, take a look at device manager, there must be one item like portable device - USB ( Com 3). keep flashing.

sure u add reinstall mtk driver

Tried many drivers, always same result:
Driver says the device can't start. Tried to install lisbus too but no changes.

Bonscia said:
Tried many drivers, always same result:
View attachment 5499127
View attachment 5499129
Driver says the device can't start. Tried to install lisbus too but no changes.
Click to expand...
Click to collapse
you "must" remove (uninstall) the driver first then re-install the MTK usb driver again.

kirinin said:
you "must" remove (uninstall) the driver first then re-install the MTK usb driver again.
Click to expand...
Click to collapse
I did that many times, with win 10 no drivers signed mode, with many different mtk drivers but nothing was working. I'll try clean my windows and then start again with the drivers.

Bonscia said:
I did that many times, with win 10 no drivers signed mode, with many different mtk drivers but nothing was working. I'll try clean my windows and then start again with the drivers.
Click to expand...
Click to collapse
is a win10 problem that i also haved. hard to solve. u can try windows 7 via virtualbox (solved a lot of my problems in the past) or format and install a modded version of win10 (but i dont suggest this)

Virtual box looks no longer available, I'll install a fresh copy of win 7 in another partition, never give up lol

virtualbox is available for all system. i have a win7 virtualized under my linux pc, and miflash works fine. no bugs. if my tips makes you happy dont try. is not my problem, i didnt bricked my phone. i dont make things without know what i'm doing. good look. u can buy a new phone if u prefere

wetito said:
virtualbox is available for all system. i have a win7 virtualized under my linux pc, and miflash works fine. no bugs. if my tips makes you happy dont try. is not my problem, i didnt bricked my phone. i dont make things without know what i'm doing. good look. u can buy a new phone if u prefere
Click to expand...
Click to collapse
? I've just told you I've tried to download virtual box for win 10 but it's not avaible now or server was temporarily down for the download, so my only way it's to set up a fresh copy on win 7 on my pc, I can't understand your hanger answer.

kirinin said:
1: Unzip this attached file into a folder. run it.
2: select the unlock bootloader and start, then connect you phone via usb with all three buttons pressed. (Phone must be off before connect, )
View attachment 5498521
3: Your bootloader will be unlocked.
4: Close the program and re-start again, this time, select auth bypass and start, then repeat the phone connection. after at the bottom line, it show bypass ok.
View attachment 5498523
from here you may flash again rom via Miflash or SPflash.
P.S: I think the file size is too big, I can not attach it here. Sorry! P.M me if you wish.
Click to expand...
Click to collapse
Hi, can you share this Zip file with link drive or mega?
Thanks in advance

Which zip file? I have only this one
https://forum.xda-developers.com/attachments/mtk_bypass_final-rar.5444529/I
finally flashed the Rom with so flash but now the phone reboot in assistance mode sayings "NV data corrupted" I'm about to cry

Hi, I've followed your instructions, I've finally flashed the Rom into the phone, but now phone bootloop into recovery, it says "nvdata is corrupted", I've took the scatter file from the Rom folder, how to fix that problem now? Thanks.

Link with files is this, I've seen other link don't work
Redmi Note 10 Pro 5G brick
Redmi Note 10 Pro 5G Chinese version with fastboot unlocked. After unsuccessful firmware. At startup, it goes into fastboot, you can load it into recovery. Wipe doesn't help. When trying to flash through fastboot MiFlashPro "FAILED (remote: 'not...
forum.xda-developers.com
Download MTK Universal Tool V5 | MediaTek All in One Tool Latest Free
MTK Universal V5 Tool is a small MediaTek All in One Tool designed to disable user locks, bypass FRP, Auth Bypass, Format Data (user data format),
www.gadgetsdr.com

Bonscia said:
Hi, I've followed your instructions, I've finally flashed the Rom into the phone, but now phone bootloop into recovery, it says "nvdata is corrupted", I've took the scatter file from the Rom folder, how to fix that problem now? Thanks.
Click to expand...
Click to collapse
try wipe data. also u can control the active slot. try change it and reboot

Hi, finally I can install the Recovery V12.5.16.0.RKPCNXM rom and the engineering rom but have no baseband and no IMEI. Tried many times to put my IMEI codes with no luck, looks I need the mt6893 modem file to use sn writer but no way to find them on net, can someone share those files please? Thanks

Question Bricked My Redmi note 10 5g Device

Hello guys..
I have a Redmi note 10 5g global and was trying to fastboot flash Indonesian ROM using Mi Flash Tool ,it started well and stopped due Preloaded error, I tried again but it persisted so I unplugged my device and tried powering it up but it wont power on,won't show charging but only makes sound when Connected to PC,I tried alot of things to fix the Preloaded but with no success.
I badly need help To fix this problem guys..

dannykuma said:
Hello guys..
I have a Redmi note 10 5g global and was trying to fastboot flash Indonesian ROM using Mi Flash Tool ,it started well and stopped due Preloaded error, I tried again but it persisted so I unplugged my device and tried powering it up but it wont power on,won't show charging but only makes sound when Connected to PC,I tried alot of things to fix the Preloaded but with no success.
I badly need help To fix this problem guys..
Click to expand...
Click to collapse
try booting into fastboot, if not, boot into brom and flash stock miui via sp tool
open up device manager to make sure everything is right.
boot into brom by holding VOL-, VOL+ and POWER, at the same time connect the phone to ur pc. if it does the connected sound, check on device manager if the driver is missing. it should have a warning sign, if it does then install the drivers i annexed below the post (ive used them and it worked, up to u)
after installing them, by the meantime ur phone probably has restarted, so reboot it into brom once again and check devices manager. if it worked it should look something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with sp tool ready to flash. but first you might need to auth bypass because of MIUI account.

1lopes said:
try booting into fastboot, if not, boot into brom and flash stock miui via sp tool
open up device manager to make sure everything is right.
boot into brom by holding VOL-, VOL+ and POWER, at the same time connect the phone to ur pc. if it does the connected sound, check on device manager if the driver is missing. it should have a warning sign, if it does then install the drivers i annexed below the post (ive used them and it worked, up to u)
after installing them, by the meantime ur phone probably has restarted, so reboot it into brom once again and check devices manager. if it worked it should look something like this:
View attachment 5733123
with sp tool ready to flash. but first you might need to auth bypass because of MIUI account.
Click to expand...
Click to collapse
Thank you very much for the help....
Let me try

indonesian rom is fully compatible. sure u made something bad.
your bootloader is unlocked???? u have downloaded fastboot version? clean flash selected? write al steps u did with precision. i'm 100% sure is not a compatibility problem. i have installed indonesian rom more then one time without any problems
IF U CAN ENTER INTO FASTBOOT, U CAN RESTORE YOUR PHONE WITHOUT PROBLEMS. stay away from advanced procedures like restore preloader. First try the easyest solutions. If didnt work i suggest mtkclient under arch linux for reflash boot vbeta and preloader. But follow my tip: enter into fastboot and reflash stock using adbdastboot tool. Is the easyest solution

Can't unlock bootloader on redmi 9 [SOLVED]

I've already searched for it and can't find anything. The closest I've got is to installing the USB driver. I opened driver_install.exe and still can't find the driver in Device Manager. I have OEM unlocking and USB debugging on. I also have my MI account linked and the unlock folder in C:\.

AlvaroE said:
I've already searched for it and can't find anything. The closest I've got is to installing the USB driver. I opened driver_install.exe and still can't find the driver in Device Manager. I have OEM unlocking and USB debugging on. I also have my MI account linked and the unlock folder in C:\.
Click to expand...
Click to collapse
Check this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://new.c.mi.com/global/post/101245
https://en.miui.com/unlock/index.html

NOSS8 said:
Check this
View attachment 5737777​
https://new.c.mi.com/global/post/101245
https://en.miui.com/unlock/index.html
Click to expand...
Click to collapse
but the latest version on https://en.miui.com/unlock/index.html is 6.5.224.28

AlvaroE said:
View attachment 5738201 but the latest version on https://en.miui.com/unlock/index.html is 6.5.224.28
Click to expand...
Click to collapse
Not important, the path and the drivers are.

NOSS8 said:
Not important, the path and the drivers are.
Click to expand...
Click to collapse
Oh MiUsbDriver.exe is there thanks!
but i get this with or without phone connected in fastboot mode

AlvaroE said:
Oh MiUsbDriver.exe is there thanks!
View attachment 5738207 but i get this with or without phone connected in fastboot mode
Click to expand...
Click to collapse
Just connect the phone but not in Fastboot mode.

NOSS8 said:
Just connect the phone but not in Fastboot mode.
Click to expand...
Click to collapse
I instead used the driver from the driver folder

AlvaroE said:
I instead used the driver from the driver folder
Click to expand...
Click to collapse
Yeap, now edit your thread title by adding [SOLVED].

Cant unlock bootloader with several versionsofunlock tools.
Latest tool v2 alpha builds recognizes phone when it is started mi ui. Then it reboot phone to fastboot , windows gling glang sound and then tool shows no phone connected. Tried wuth 2 cables. Checked devicemanager- when mi note 9 in fastboot it appears as android with esclamation mark.
Tried to reinstall adb drivers and also usb qualcom. Same.
In windows or in ubuntu note 9 is always recognizes and can accesss its internal storage.

dzincha said:
Cant unlock bootloader with several versionsofunlock tools.
Latest tool v2 alpha builds recognizes phone when it is started mi ui. Then it reboot phone to fastboot , windows gling glang sound and then tool shows no phone connected. Tried wuth 2 cables. Checked devicemanager- when mi note 9 in fastboot it appears as android with esclamation mark.
Tried to reinstall adb drivers and also usb qualcom. Same.
In windows or in ubuntu note 9 is always recognizes and can accesss its internal storage.
Click to expand...
Click to collapse
Use the official tool and install the drivers (remove the drivers previously installed before and restart).
https://new.c.mi.com/global/post/101245
https://en.miui.com/unlock/index.html

Tried version in link- same situation.
Looks like problem is that windows is loosing connection when phone goes in Fastboot.
This is how device manager looks like when phone in fastboot

dzincha said:
Tried version in link- same situation.
Looks like problem is that windows is loosing connection when phone goes in Fastboot.
This is how device manager looks like when phone in fastboot
Click to expand...
Click to collapse
https://avalonsciences.com/wp-conte...Signature-Verification-on-Windows-8-or-10.pdf

Tried to turn off signature verification, but then bittlocker started to behave strange at boot up/couldnt enter code - 8 numbers.
Then tried to reinstall one of 4 ubuntu laptops. There got boot failure, prepared usb with another tool, then got another boot failure.
Maybe there are tools for Linux to do bootloader unlock?

dzincha said:
Tried to turn off signature verification, but then bittlocker started to behave strange at boot up/couldnt enter code - 8 numbers.
Then tried to reinstall one of 4 ubuntu laptops. There got boot failure, prepared usb with another tool, then got another boot failure.
Maybe there are tools for Linux to do bootloader unlock?
Click to expand...
Click to collapse
I had the case with an Intel W10 PC, as soon as I launched Miunlock the device disappeared, I tried all without success but with an Amd W10 PC, no problem (sometimes it's the opposite).
There are other ways to unlock the bootloader but I don't recommend them (do a search), too risky, anyway if you have a driver problem it won't change anything.
https://forum.xda-developers.com/t/...oader-of-xiaomi-devices-on-mac-linux.3782444/

Question Reflashing stock ROM on bootlooping device

Hi.
Bought this phone 4 months ago and it went into a boot loop, where it would only show the battery empty icon. Yesterday, I tried turning it on again and noticed, that it's stuck at the Redmi - Powered by Android" screen. From this screen, I can enter fastboot. See this video:
VID_20230417_194410.mp4
drive.google.com
I've read that there are a couple of options for reflashing this device:
- aks someone with the authorized Xiaomi account to reflash stock rom using the MiFlash tool (no bootloader unlock needed)
- put the device somehow into ETL mode and reflash stock rom using the MiFlash tool (no bootloader unlock needed)
I've tried contacting someone, who for #1, but they aren't willing to help, for some reason (I'm wiling to pay). For #2, I'd have to open up the device, which I'd like to avoid doing.
Would anybody know of any other options for fixing this?
Thank you in advance!

okay, which version of MIUI are you running?
first get the fastboot rom of the version your phone supports , i recommend the global version fastboot rom , because it works and its stable and u get your updates
download this fastboot rom first
Temporary file download page
miuirom.org
and I will give you the MI flash tool working version at like 6 hours after, Ill post the remaining steps after you download this , btw, you will get a .tgz file , when u download the Rom, thats the one you need

RunoTheDog said:
Hi.
Bought this phone 4 months ago and it went into a boot loop, where it would only show the battery empty icon. Yesterday, I tried turning it on again and noticed, that it's stuck at the Redmi - Powered by Android" screen. From this screen, I can enter fastboot. See this video:
VID_20230417_194410.mp4
drive.google.com
I've read that there are a couple of options for reflashing this device:
- aks someone with the authorized Xiaomi account to reflash stock rom using the MiFlash tool (no bootloader unlock needed)
- put the device somehow into ETL mode and reflash stock rom using the MiFlash tool (no bootloader unlock needed)
I've tried contacting someone, who for #1, but they aren't willing to help, for some reason (I'm wiling to pay). For #2, I'd have to open up the device, which I'd like to avoid doing.
Would anybody know of any other options for fixing this?
Thank you in advance!
Click to expand...
Click to collapse
If you can boot into fastboot, then it is already enough.
Now, I suppose your bootloader is still locked
You need to download a MIUI ROM from "EEA", from any trusted website, and remember to download the "Fastboot" ROM to flash it (my favorite is mifirm.net, it downloads faster)
Install MiFlashPro - attached at the end of the thread
Open it up, and you will be greeted with this.
Click on the "Mi Flash" tab, as it is the only one we need.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You will be greeted with this window now:
After you have done downloading your ROM, extract it to any place.
If MiFlash does not recognise the directory you have extracted in, move it to C:\. Not any external drive, your main one
Now click on the "select" button box, go to your ROM directory, and simply select its folder
Boot your device into fastboot (PWR + VOL-), click on "refresh" button box and your device serial number should appear on the first line.
Now simply click "flash" and let it do its job for 10 to 15 minutes. It will reboot automatically.
If you dont succeed, please read this thread:
Thread '[GUIDE] UNBRICK YOUR HARD-BRICKED MTK' https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
You will require BROM and to bypass and to flash via SP Tool.
RunoTheDog said:
For #2, I'd have to open up the device, which I'd like to avoid doing.
Click to expand...
Click to collapse
You have either got confused, or being scammed
Newer MTK devices do not require the opening of the device. I suppose you have been probably confused with a Qualcomm Snapdragon based service, that does require the opening, so you can access EDL mode and flash your phone into life, or someone just put up the Redmi Note 10 5G and is a scam, also, on MTK, you do not need to pay for a authorized Mi account. On MTK, it is easily bypassable due to BROM

Thank you both.
I put ran MiFlashPro, pointed it towards the downloaded eea stock rom file and attempted to flash it, but got this error message:
So I presume this is due to locked bootloader? I'll try to follow the second link.

I actually managed to enter recovery mode and do a factory reset. Currently setting it up and plan on updating it.

RunoTheDog said:
I actually managed to enter recovery mode and do a factory reset. Currently setting it up and plan on updating it.
Click to expand...
Click to collapse
Good to hear you got sorted. I basically bricked my phone last week (only 3 weeks old ) after trying to switch from MIUI 13 Global to EEA. I managed to get it into BROM mode and used MTK Auth Bypass which allowed me to use Chimera Tools to flash the phone again as nothing else seems to work with a locked bootloader. Currently running MIUI 14 with root and magisk optimisations (blur/high end tweaks, MIUI monet etc) and loving it! Just need a way to bypass Play Integrity API for Google Wallet