hi
so i was trying to root my Galaxy mini 2 S6500D
and was following this tut:
0, we Switch off all antiviruses.
1. Open the Odin 1.85 program. Connect switched-off phone by cable to the computer.
Enter phone into the bootloader mode (volume down+home+power on).
Check PDA, select the ROOT.TAR file, click Start. We wait.
2. In case of start the screen will be all in artifacts and the sensor won't work! it's OK ( besauñe s7500)
3. Open DooMLoRD_v4_ROOT_zergRush_busybox_su and launch runme.bat
Root!
4. open the Odin 1.85 program. We connect switched-off phone by cable to the computer.
enter phone into the bootloader mode (volume down+home+power on).
Check PDA, select the S6500DXXLC4.tar file, click Start. Wait
now after it boots the colors are all washed out as the text say ( 2. In case of start the screen will be all in artifacts and the sensor won't work! it's OK ( besauñe s7500) )
now when i run the .bat file it says waiting for device and nothing happens
when i reboot the phone sensor still now work and cant use the phone!!!
help please!
and where i can download the adb drivers for the device because the .bat files request them (
joey_W said:
hi
so i was trying to root my Galaxy mini 2 S6500D
and was following this tut:
0, we Switch off all antiviruses.
1. Open the Odin 1.85 program. Connect switched-off phone by cable to the computer.
Enter phone into the bootloader mode (volume down+home+power on).
Check PDA, select the ROOT.TAR file, click Start. We wait.
2. In case of start the screen will be all in artifacts and the sensor won't work! it's OK ( besauñe s7500)
3. Open DooMLoRD_v4_ROOT_zergRush_busybox_su and launch runme.bat
Root!
4. open the Odin 1.85 program. We connect switched-off phone by cable to the computer.
enter phone into the bootloader mode (volume down+home+power on).
Check PDA, select the S6500DXXLC4.tar file, click Start. Wait
now after it boots the colors are all washed out as the text say ( 2. In case of start the screen will be all in artifacts and the sensor won't work! it's OK ( besauñe s7500) )
now when i run the .bat file it says waiting for device and nothing happens
when i reboot the phone sensor still now work and cant use the phone!!!
help please!
and where i can download the adb drivers for the device because the .bat files request them (
Click to expand...
Click to collapse
Hi,
Here's the procedure:
Install any working fw with odin (stock).
Download attached file and extract it.
Install clockworkmod-jena.5.2.0.8.tar.md5 with Odin and wait until phone reboots.
Copy Superuser-3.1.3-arm-signed.zip to sdcard/internal storage if you don't have sdcard.
Turn off the phone, press vol up + vol down + home key + power until device powers on. It will enter CWM recovery.
Apply Superuser zip and reboot phone..... It's rooted
EDIT: For adb drivers, install Kies.
joey_W said:
hi
so i was trying to root my Galaxy mini 2 S6500D
and was following this tut:
0, we Switch off all antiviruses.
1. Open the Odin 1.85 program. Connect switched-off phone by cable to the computer.
Enter phone into the bootloader mode (volume down+home+power on).
Check PDA, select the ROOT.TAR file, click Start. We wait.
2. In case of start the screen will be all in artifacts and the sensor won't work! it's OK ( besauñe s7500)
3. Open DooMLoRD_v4_ROOT_zergRush_busybox_su and launch runme.bat
Root!
4. open the Odin 1.85 program. We connect switched-off phone by cable to the computer.
enter phone into the bootloader mode (volume down+home+power on).
Check PDA, select the S6500DXXLC4.tar file, click Start. Wait
now after it boots the colors are all washed out as the text say ( 2. In case of start the screen will be all in artifacts and the sensor won't work! it's OK ( besauñe s7500) )
now when i run the .bat file it says waiting for device and nothing happens
when i reboot the phone sensor still now work and cant use the phone!!!
help please!
and where i can download the adb drivers for the device because the .bat files request them (
Click to expand...
Click to collapse
USB Debugging is enabled? The DooMLoRD_v4_ROOT_zergRush_busybox_su must be usb debugging enable!
Try flash first official rom with Odin!
djfnz said:
USB Debugging is enabled? The DooMLoRD_v4_ROOT_zergRush_busybox_su must be usb debugging enable!
Try flash first official rom with Odin!
Click to expand...
Click to collapse
No, maybe I wrote pure description.
Here it goes again....
When you're on stock rom, with Odin you flash cwm recovery by selecting PDA in odin, select .md5 file of cwm and flash.
After that CWM is installed. Wait until phone boots up and copy Superuser zip to external sdcard of your phone or internal memory.
Switch off your phone and power it on going to recovery (volume up + volume down + home button + power). When in CWM just flash Superuser zip and reboot your device.
well there is other problem now
all i was missing was the ADB divers
i got them with Kies and rooted fine and super user was installed auto by the .bat file
i was trying an app that change the screen resolution
now its all messed up and when i boot the phone i can only Hear the logo but cant see it and the phone keeps vibrating couple of times
how do i reset everything??
I see there is a lot of people who post in here who dont know how to Flash JVU before Custom Rom with ODIN
Either they get the Red wipe error in Recovery or just arent sure on how to use it, hope this helps you...
THE TOPICS HERE ARE GUIDES ON HOW TO FIX OR USE :
RED WIPE DBDATA ERROR
FLASH JVU 2.3.6 BEFORE CUSTOM ROM
MANUALLY INSTALL CWM
FEAMOD RECOVERY INSTALL
FIX INTERNAL STORAGE ON GT-I9000M
FAILED TO MOUNT SD CARD (E: FAILURE IN RED)
COMPUTER NOT CONNECTING TO PHONE VIA USB
UPDATE TO CYANOGENMOD 10.
AND LINKS TO WHAT YOU NEED ......
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------
Red wipe error is because the problem is with the dbdata!
Install THIS FILE in the PDA section with ODIN and dont touch anything else!
DBDATA.RFS DOWNLOAD : If you need it
Open ODIN
Click the PDA button and choose the dbdata.rfs.tar file you downloaded
Make sure Re-Partition is unchecked
Boot your SGS into DOWNLOAD MODE
To do this : Hold down the Home, Volume Down and the Power button
Connect your device to your computer with the usb cable when in Download Mode
If your device is connected Odin will recognise it
Click Start in Odin and wait
When the process is completed your device will restart
No more dbdata errors!...
------------------------------------------------------------------------------------------------------------------------------------
HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
Samsung USB Drivers : DOWNLOAD MINE or LINK 1 : LINK 2
Needed to recognise Phone to your PC ... duh! :silly:
Reboot Computer once installed for changes to take effect :good:
Please do not attempt anything if you don’t know completely what it is.
If any damage occurs to you or your device, I will not be held liable ... you have been warned !!
If you arent sure ... just ask
FLASHING JVU ROM WITH ODIN v1.85
Why ODIN v1.85? ... I have not had any issues with it, plain and simple!
Use ODIN with PIT File
PIT File Incase you need it : DOWNLOAD
*Using PIT File just Tick Re-Partition and put PIT File in PIT ..simple!
ODIN 1.85
ODIN FILES HERE
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so continue..if not do it again...
VIDEO LINK : HOW TO GET INTO RECOVERY / DOWNLOAD MODE
Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
*PIT File isnt always needed to do this only if you get the 3 Red errors*
Plug in Phone with USB Cable To Computer
In ID:COM it should go yellow and you should see ADDED in the message box
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar
When you have all the files needed in ODIN, say JVU Rom as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone (computer will make a few noises like connect/disconnecting
Unplug the Cable to the Phone
Power Off Phone
Go into Download mode so that we can now root the Phone
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted
CF-Root is in ODIN FILES or DOWNLOAD HERE
Then Click START.. should take just a few seconds ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same again when you see S Logo on Phone unplug Cable
Close ODIN
Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want...
Reboot Phone when complete... DONE!
Please Check APN Settings.. for your area after you have done the following steps to give better signal
Sometimes Authentication Type is set to Default..try it at PAP and then Reboot Phone
As some ROMS APN settings are done manually for the user.. so be careful
Rom I am currently using : Blue SAUROM JWB
Hope this helps out a few people as there are quite a few posts opening up with the same problems or issues :good:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Manually Install CWM (need to have Root in your phone)
Download This FILE and copy it over to /sdcard/
Power off and Boot into Recovery with 3 Button Combo
Select 'apply sdcard:update.zip' and Install (Do not Delete this file from SD Card)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Deleting Cryption Meta Data Error : CWM6012-CM9-Recovery
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU CANT GET INTO RECOVERY (only if CWM doesnt work)...
Start ODIN
Put your Phone into Download mode and connect it via USB
(Volume Down + Home and then Power)
Download FeaModRecovery : HERE
Choose PDA and use the Downloaded File and put it in there > START
Wait for process to complete....
Exit ODIN..
Start Recovery ....
Install .. Reboot....Done
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU STILL RECIEVE THE : E: Failed to mount /sdcard
Try This :
Download This First SDFormatter (Windows)
1. Download "SDFormatter" from the link above
2. Install "SDFormatter"
3. Enable "USB Debugging Mode" from Developer Options in settings.
4. Connect your tablet to PC (USB).
5. Then, tap the "USB Strage Mode" to connect to PC.
6. Backup data on INTERNAL_SD card.
7. Run "SDFormatter".
8. Specify the drive letter of INTERNAL_SD in SDFormatter and click "(Option)" button.
9. "FORMAT TYPE" select "FULL OVERWRITE" and set "FORMAT SIZE ADJUSMENT" to "ON" and click "OK"
10. Now click "FORMAT" and wait for the procedure to complete. (Can take approximately 1 hour 40 minutes)
11. After format is completed you can recopy the backup files back onto the INTERNAL_SD
..or Try and Format SD card in your Computer
If none of the above works try this : Samsung Format Utility
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIX INTERNAL STORAGE ON GT-I9000M (/dev/block/mmcblk0 corrupted) : SEE THIS POST
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COMPUTER NOT CONNECTING TO PHONE VIA USB
Windows
Remove all traces of KIES in Add/Remove.. never use KIES anyway...Reboot PC
Unplug any attached USB Devices to PC
Use Latest Samsung USB Drivers HERE and install.. Reboot System when Done
Go to Device Manager and scroll to the Bottom > Universal Serial Bus controllers
Expand all Items >
Now Uninstall one by one all the way down...
Reboot Computer when Done.
Plug in Phone... wait till it recognises Device.
Some people have also tried ...
Going into Download Mode, Connect Phone to USB.
System should install a Driver.. and voila!
Done.
DOWNLOAD THIS AND FOLLOW INSTRUCTIONS IF YOU NEED MORE HELP
Please Hit the Thanks Button if I helped you... :victory:
A.I.O Rescue & Recover : LINK
Android Solutions : LINK
Samsung Updates : HERE
Latest Official I9000 and I9000M Firmwares collection : LINK
Modems : LINK
Perka's File Stash : LINK
Z4ROOT APP : HERE
3 BUTTON COMBO FIX : HERE
SECRET CODES : HERE *Use at your own Risk!*
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Procedure To Update Samsung Galaxy S With Cyanogenmod 10
Device must be running latest Gingerbread 2.3.6 with ROOT to begin .....
Remove KIES completely from Phone and reboot Computer then Install latest Samsung USB Drivers then Reboot Computer...
Ensure that your phone battery is at least 85 percent charged
Cyanogenmod 10 Download
Download Google Apps (Optional)
Connect your device to PC by using the cable.
Enable mass storage mode on it.
Now transfer / copy all the 2 files to your device’s internal SD card.
Ensure that you are not keeping it in deep directory.
Now disconnect the phone from computer.
You then need to enter into recovery mode.
To do so, switch off the device completely, press & hold Volume Up button + Home Button + Power key until recovery mode appears.
After entering into recovery mode, select “install zip from sdcard” & then “choose zip from sdcard“.
Navigate to the ROM file (which you’ve transferred earlier)
Select it & press on ‘Yes‘ to continue. ROM installation process will start.
Wait for the ROM to get installed.
After ROM gets successfully installed, your phone will land in the recovery mode again.
Now select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory.
The same procedure you have to do for installation Google Apps. (Just don’t do the above step i.e, don’t wipe the data after installations of Gapps).
After installaing both things, now press back button to land in recovery mode.
Select reboot system now from the Recovery mode to Restart the phone.
Usually first boot of the phone takes some time after flashing of new ROM so be patient....
Done!
Issues if you have any :
LOW STORAGE NOTIFICATION : HERE or See this LINK
If the above doesnt help TRY THIS APP
NO MOBILE DATA :
Toggle Flight mode ON/OFF
IMEI Issue :
Flash a stock version of Android for your device: GB 2.3.6 (JVU, or other) that will restore your IMEI
Then you can backup the /EFS folder.
NO 3G AVAILABLE :
The CSC you used is most likely not intended for your area.
This means that the broadband provider settings are not included and
need to be configured manually.
Go to : Settings->Wireless and Networks->Mobile Networks->Access Point Names, press the settings-button and select "New APN"
Galaxy S i9000 / 9001 Disassembly & Assembly
Will add more links when I can ...
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Snowhiter said:
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Click to expand...
Click to collapse
Your most welcome!
Will add more when i get the time...:fingers-crossed:
Added more useful Links.. should be everything you need
HI,
thank you for this huge How to!
I have big trouble to update my Device.
It is not possible to get in the download mode. I tried SDFormatter, it crashes every time i connect SI, Samsungs Ex. HDD Formater runs but no effects on the Phone. Odin cant flash anything (maybe of course of download modus).
What do you recommend?
Sys:
WIN XP Pro SP3, Samsung Driver, Kies
Samsung SI, Android 2.3, Vodafone (Germany) Branding, No Simlock, SIM insert (E-Puls, Provider), No Ex SD Card, original Samsung USB-Cable
What are you trying to update to?
Using the Format tool try with USB Debugging ON
>
Uninstall Kies and reboot machine
Use my HOW TO Files ...
Install Samsung USB Drivers to install then reboot computer again..
Open ODIN and Check Re-Partition and put in PIT File
Make sure all 3 are ticked...
Also put in PDA / Modem / CSC press start when phone is connected via Download MODE
Press start....
Then just follow the rest to Root it...
Let me know if this helps
If you are wanting to go to CM 10 or JB Kies is no use anyway...no one uses KIES anymore
Thanks a lot. I pressed volume +... That was my fault.
Now runs CM 10.1 Nighlty with Helly Bean!
Tnak you
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
grA$ said:
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
Click to expand...
Click to collapse
Glad it helped
** Updated :victory:
New links added ... should cover everything!
This should be more than enough for anyone with problems with there S i9000 Phones
Re: [HOW TO GUIDE] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★
Thanks for the amazingly helpful thread. I had spent amazing amounts of time looking for a JVU bootloader an could not find it. Now i don't need to as your GB odin files fulfilled all my needs.
Now to test out whether your section on drivers will solve my issues of connecting post GB ROMd phone to my computer.
Sent from my GT-I9000 using xda app-developers app
Your welcome, if you dont need Kies in your computer get rid of it ....
Reboot computer afterwards then Install the Samsung USB Drivers and reboot PC again to take affect....
If Phone doesnt recognise follow the Tutorial on the link if USB not Recognised
Random thought .......Life is so good!
High WAF Wireless Inductive Charging Mod Step by Step Guide
Ok i am a little confused with your guide so decided to ask a few questions
i have read your guide down to after odin and this is where i got stuck
i downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
mazoshi said:
I downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
Click to expand...
Click to collapse
Re-Partition > ON
If you downloaded the ODIN Files all these are included in the files PDA / MODEM / CSC
HERE
What Rom are you coming from etc...
im useing what was on the phone and my phone is upto date so not sure
Hi Guys,
Some people faced some problems with flashing stock ROM with Odin, so here is a guide for a perfect flash.
Steps:
1) Download all files attached downwards.
2) Check that you have Samsung Kies on your PC.
3) Install Samsung USB drivers then restart your PC (in this step don't connect your phone to PC or you must restart your PC to install it.
4) Open recovery mode on your phone( volume up + home + power) and wipe data/cache via CWM (if you want it it will be attached downwards), then format your phone with rio's multi formatter to RFS (stock format type)
5) Open odin v.3.07
6) Open download mode on your phone ( volume down + home + power) and then connect it to your PC.
7) Put your ROM in PDA as SS attached downwards then tick PDA.
8) Make sure that Re-Partition is not ticked.
9) Press Start and wait few minutes.
10) If your Odin is stuck in connections, close Odin and Reinstall Samsung USB drivers.
Enjoy!!!!!!!!!!!!!!!
Downloads:
1) Samsung USB drivers:
http://www.mediafire.com/download/4ano45gsfx8lfub/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
2) Odin v.3.07:
http://www.mediafire.com/download/n5hdq5v5j55saie/Odin307.zip
3) Egyptian Last ROM:
http://www.mediafire.com/download/kld6y1wi8jns14c/S5570IJPLF1_S5570IOJPLE2_EGY.zip
4) Rio's Multi Formatter:
http://www.mediafire.com/download/72cxxiyamm755w6/multi-formatter-v1.zip
5) Clockwork mod ( will not remove your recovery):
http://www.mediafire.com/download/ct8m3ap7320lf43/pop_plus_CWM.zip
CREDITS:
@rio. for his multi formatter
@myaservip for some steps
@biso46
If you need you stock region ROM you can go here:
http://www.sammobile.com/firmwares/2/
Another Method
myaservip said:
Another Method
Click to expand...
Click to collapse
But btw my method is easier and It works.
You musn't divide the .md5 to let it flash.
And I'm not arguing that your method is good, but my method is esaier for noobs .
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
installing stock roms r toooo long fineshed with
why u descusing something we already used and known
stop this ...flashing stock roms not a game for pro or noobs !!!
How to install Android 7 on the Galaxy S7 Edge G935A Att
Your phone is still not getting the Android 7 update...... – here is a simple way to install it manually
Download files
1. Download the G935AUCS4APK1.zip android 6 firmware from here:
https://drive.google.com/drive/u/0/folders/0BwZiuHd8AO5KYjBRczBLN3lNZWs
or from any other place
2. Copy the upgrade firmware from G935AUCS4APK1.zip to Android 7 SS-G935AUCS4APK1-to-U4BQA6.zip from here:
https://www.androidfilehost.com/?fid=457095661767134163
• Rename the SS-G935AUCS4APK1-to-U4BQA6.zip to update.zip
• Open a directory in the root directory of a microsd and move update.zip to it.
• Insert the microsd to your phone.
3. Copy the latest ODIN from here:
http://razintech.com/download-odin-flashing-tool-all-versions-free/
Installation
1. Enable USB DEBUG in the phone
2. In your computer install the Samsung USB drivers.
3. Go to download Mode by pushing and holding the: home+power+vol dn
4. Install the ODIN in your computer.
5. Copy the content of the G935AUCS4APK1.zip to the Odin directory in your comp
6. Open the ODIN and click on the BL and load the BL file then clock on AP and load the AP file then click on the CP and load the CP file then click on the CSC and load the CSC file. Don’t change anything else in the ODIN
7. Click start and wait till it done.
8. Enter the phone into RECOVERY MODE by clicking home+power+vol DN and when the screen will become dark release and hold the home+power+vol up
9. You will enter into the RECOVERY MODE – click on “apply update from external storage” then go to the fota dir and select the upate.zip
10. Wait till it done and click on reboot the system.
That’s all. It will look MUCH better now and if you had wifi psw lost issue like I had it will solve and also other issues will be solved. Enjoy it
yosiraz said:
How to install Android 7 on the Galaxy S7 Edge G935A Att
Your phone is still not getting the Android 7 update...... – here is a simple way to install it manually
Download files
1.Download the G935AUCS4APK1.zip android 6 firmware from here:
https://drive.google.com/drive/u/0/folders/0BwZiuHd8AO5KYjBRczBLN3lNZWs
or from any other place
2.Copy the upgrade firmware from G935AUCS4APK1.zip to Android 7 SS-G935AUCS4APK1-to-U4BQA6.zip from here:
https://www.androidfilehost.com/?fid=457095661767134163
•Rename the SS-G935AUCS4APK1-to-U4BQA6.zip to update.zip
•Open a directory in the root directory of a microsd and move update.zip to it.
•Insert the microsd to your phone.
3.Copy the latest ODIN from here:
http://razintech.com/download-odin-flashing-tool-all-versions-free/
Installation
1.Enable USB DEBUG in the phone
2.In your computer install the Samsung USB drivers.
3.Go to download Mode by pushing and holding the: home+power+vol dn
4.Install the ODIN in your computer.
5.Copy the content of the G935AUCS4APK1.zip to the Odin directory in your comp
6.Open the ODIN and click on the BL and load the BL file then clock on AP and load the AP file then click on the CP and load the CP file then click on the CSC and load the CSC file. Don’t change anything else in the ODIN
7.Click start and wait till it done.
8.Enter the phone into RECOVERY MODE by clicking home+power+vol DN and when the screen will become dark release and hold the home+power+vol up
9.You will enter into the RECOVERY MODE – click on “apply update from external storage” then go to the fota dir and select the upate.zip
10.Wait till it done and click on reboot the system.
That’s all. It will look MUCH better now and if you had wifi psw lost issue like I had it will solve and also other issues will be solved. Enjoy it
Click to expand...
Click to collapse
Or you can odin strate to Nougat from here: http://forum.xda-developers.com/showthread.php?p=71343011
Clicking from Edge of Galaxy
It would also help if this wasn't regurgitated info from a thread that is still on the first page of this exact section...
I forgot to turn on usb debugging like an idiot and i am stuck in a bootloop. what can i do?
HI , i am new & i have weakness in english because my mother language bangla
OK started
WORK YOUR OWN RISK !!!!
1-> unlock bootloder,
2-> download ODIN
3->connect device in download mood.
4-> open odin click ap bouton .select boot.tar ( i all rady pach it by magisk) boot pach
5-> odin option clik and unmark all. and click start.
6->after pass unplug from usb volume- boutoon and power bouton press 7-10 secend device restart.
7-> not open magisk on home menu icon now install magisk v 23.0
8->restart device open magisk and unmark magisk update option. i sugest u keep magisk v23 in ur device.
-----root complete----
next step flash twarp........(twrp work on M02s and A02s both device
9-> download twrp file. twrp for samsung M02S &A02s work on booth deivece
10-> extart it ,it contain 2 file 1.twrp.tar 2.service disabler.zip
11-> keep twrp.tar in pc and service disable.zip send your phone memory.
12-> device restart in download mood ,open odin clik ap bouton ,select twrp.tar , odin option bouton clik and unmark all.hit start.ok
13-> now volume- and power bouton press and keep hold 7-10 secend. device start recovary mood and open twrp,if device start power off and press volume+ - hold and plugin usb.
14-> twrp menu open click install, select service disable.zip flash it , go totwrp wipe menu click formatte data type "yes" hit enter
complete after device restart.all done!!
remembar- odin menu option unmark all both flash
keep magisk vertion 23.0 do not update.( it's my choiche)
TWRP IS UNOFFICIALLY
WORK YOUR OWN RISK !!!!